10:26 a.m.
Noting more configuration ,if I configure openfiler as a iSCSI Lun able to
detect the lun , moment I configure EMC Lun unable to detect the Lun ID .
Any other configs do I need to do in Host ? any comands to delete the old
Lun ID ?
.[root@pbuovirt3 ~]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 03 Id: 00 Lun: 00
Vendor: HP Model: P410i Rev: 2.00
Type: RAID ANSI SCSI revision: 00
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: LOGICAL VOLUME Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Optiarc Model: DVD RW AD-7561S Rev: AH52
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi8 Channel: 00 Id: 00 Lun: 00
Vendor: DGC Model: LUNZ Rev: 3103
Type: Direct-Access ANSI SCSI revision: 04
[root@pbuovirt3 ~]#
On Tue, Sep 20, 2016 at 8:51 PM, Dan Yasny <dyasny(a)gmail.com> wrote:
It looks like iscsi does the job, bu multipath doesn't. What do
you use on
the hosts? How is multipath.conf configured? Any other special
configuration you use?
Also, can you paste /proc/scsi/scsi and blkid
On Tue, Sep 20, 2016 at 11:18 AM, Budur Nagaraju <nbudoor(a)gmail.com>
wrote:
>
> Below are the details,
>
> http://pastebin.com/aLBMH3Q6
>
> On Tue, Sep 20, 2016 at 8:27 PM, Dan Yasny <dyasny(a)gmail.com> wrote:
>
>> Try this on the host:
>>
>> iscsiadm -m discovery -t st -p 10.206.67.46
>> iscsiadm -m node -L all
>> iscsiadm -m node
>> iscsiadm -m session
>> multipath -ll
>>
>> and pastebin the output
>>
>> On Tue, Sep 20, 2016 at 10:54 AM, Budur Nagaraju <nbudoor(a)gmail.com>
>> wrote:
>>
>>> Yes I did that too but no luck :(
>>>
>>> Thanks,
>>> Nagaraju
>>>
>>>
>>> On Tue, Sep 20, 2016 at 8:06 PM, Dan Yasny <dyasny(a)gmail.com> wrote:
>>>
>>>> After you discover, did you also click the login button?
>>>>
>>>> On Tue, Sep 20, 2016 at 10:28 AM, Budur Nagaraju
<nbudoor(a)gmail.com>
>>>> wrote:
>>>>
>>>>> Below are the Steps,
>>>>>
>>>>> Under Storage Tab:New Domain -->Name>Domain
>>>>> Type-->Data/iSCSi-->Select the Host -->Discover the Targets
,
>>>>>
>>>>> After giving all the info able to detect the iSCSI targets but uable
>>>>> to get the Lun id ,below are the details of the logs.
>>>>>
>>>>>
>>>>> http://pastebin.com/ph1YSqhH
>>>>>
>>>>> Thanks,
>>>>> Nagaraju
>>>>>
>>>>>
>>>>> On Tue, Sep 20, 2016 at 6:47 PM, Dan Yasny <dyasny(a)gmail.com>
wrote:
>>>>>
>>>>>> Can you describe what you tried to do and how it failed?
>>>>>>
>>>>>> On Tue, Sep 20, 2016 at 5:54 AM, Budur Nagaraju
<nbudoor(a)gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> HI All,
>>>>>>>
>>>>>>> While configuring iSCSI LUN is not getting detected any
documents
>>>>>>> to configure iSCSI in oVirt ?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Nagaraju
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users(a)ovirt.org
>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>