1:50 a.m.
--_000_B47F00825D68444ABC03733078275360377C5B4F013BR1MPN1013MG_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hi, no network manager... I have been sort of doing what you describe. I c=
reate my first interface manually with a minimum configuration (when I was =
first testing ovirt, I was using trunked ports and vlans, so had to do all =
that manually) then add the host to ovirt-engine and it did it's magic and =
bonded interfaces for me.. I'm going to try a later release I think as it s=
eems there may have been a bug like this in 3.5.1.
Thank you
From: Soeren Malchow [mailto:soeren.malchow@mcon.net]
Sent: 19 April 2015 14:48
To: Bill Dossett; users(a)ovirt.org
Subject: Re: [ovirt-users] bonding interfaces
Hi Bill,
First, i would strongly suggest that you check whether the interfaces are e=
xplcicitly NOT managed by NetworkManager, thats the way we do it.
We have something like this
-
DEVICE=3Dovirtmgmt
TYPE=3DBridge
DELAY=3D0
STP=3Doff
ONBOOT=3Dyes
IPADDR=3D
NETMASK=3D
GATEWAY=3D
BOOTPROTO=3Dnone
DEFROUTE=3Dyes
NM_CONTROLLED=3Dno
HOTPLUG=3Dno
----
And
-
DEVICE=3Dbond0
BONDING_OPTS=3D'miimon=3D100 updelay=3D0 downdelay=3D0 mode=3D802.3ad xmit_=
hash_policy=3Dlayer3+4'
BRIDGE=3Dovirtmgmt
ONBOOT=3Dyes
NM_CONTROLLED=3Dno
HOTPLUG=3Dno
---
Physical interfaces
-
DEVICE=3Dp3p3
HWADDR=3D
MASTER=3Dbond0
SLAVE=3Dyes
ONBOOT=3Dyes
MTU=3D1500
NM_CONTROLLED=3Dno
-
And we actually create all the interfaces BEFORE ovirt installation even th=
ough the files will be regenerated after installing and configuring ovirt (=
vdsm)
That works like a charm for us
Cheers
Soeren
From: Bill Dossett <Bill.Dossett@pb.com<mailto:Bill.Dossett@pb.com> Date: Thursday 16 April 2015 21:49
To: "users@ovirt.org<mailto:users@ovirt.org>"
<users@ovirt.org<mailto:users=
@ovirt.org> Subject: [ovirt-users] bonding
interfaces
Hi,
I had a Gluster Cluster running that I setup with oVirt engine... "had" bei=
ng the operative word here.
Today I connected the second network interface and then went to the host an=
d tried to bond this interface to the ovirt mgmt. network... this is where =
the "had" part comes in ;-)
Now I have no working interfaces at all, can't ping in or out and all inter=
faces say they are down, en1, 2, ovrtmgmt and bond0 when I do an ip add (th=
is is centos7)
I have done this quite a few times on RHEV clusters and it always worked we=
ll, very impressed with it.
The differences are...
RHEV cluster I was using trunked ports and VLANS
RHEV I was using 6.4 or 6.5 RHEL
I think that's it.
I haven't really dug into the /etc/sysconfig/network-scripts to see what no=
rmally goes into the config files to create a bonded interface - only to se=
e how to configure my first interface with a vlan and then I let ovirtengin=
e do the rest for me as it worked so wellI
I guess I may have to rip it out and start over unless anyone has any tips =
on fixing it. It's just PoC anyway, so learning.
Thanks
Bill Dossett
Systems Architect
Tech Central - Global Engineering Services
T +1 303 440 3523
M +44 (0)777 590 8612
bill.dossett@pb.com<mailto:bill.dossett@pb.com
pitneybowes.com<http://pitneybowes.com/
Pitney Bowes
4750 Walnut Street | Boulder, Colorado, 80301 | USA
In Engineering?
Raise a ticket via Remedy Anywhere [HERE<applewebdata://5D25CA10-0BA9-4233-=
9DDF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Inc=
ident/newIncident.aspx>] takes less than a minute
CloudForms User Guide available [HERE<https://dl.dropboxusercontent.com/u/6=
219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf>]
________________________________
________________________________
--_000_B47F00825D68444ABC03733078275360377C5B4F013BR1MPN1013MG_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml"
xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word"
=
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml"
xmlns=3D"http:=
//www.w3.org/TR/REC-html40" <head <meta http-equiv=3D"Content-Type"
content=3D"text/html; charset=3Dus-ascii"=
<meta name=3D"Generator" content=3D"Microsoft
Word 15 (filtered medium)" <!--[if
!mso]><style>v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style><![endif]--><style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-fareast-language:EN-US;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:windowtext;}
span.EmailStyle18
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" / </xml><![endif]--><!--[if gte mso
9]><xml <o:shapelayout
v:ext=3D"edit" <o:idmap v:ext=3D"edit"
data=3D"1" /
</o:shapelayout></xml><![endif]--
</head <body lang=3D"EN-GB"
link=3D"#0563C1" vlink=3D"#954F72" <div
class=3D"WordSection1" <p
class=3D"MsoNormal"><span style=3D"color:#1F497D">Hi, no
network manager=
… I have been sort of doing what you describe. I create my firs=
t interface manually with a minimum configuration (when I was first testing=
ovirt, I was using trunked ports and vlans, so
had to do all that manually) then add the host to ovirt-engine and it did =
it’s magic and bonded interfaces for me.. I’m going to try a la=
ter release I think as it seems there may have been a bug like this in 3.5.=
1.<o:p></o:p></span></p <p
class=3D"MsoNormal"><span
style=3D"color:#1F497D"><o:p> </o:p></spa=
n></p <p
class=3D"MsoNormal"><span style=3D"color:#1F497D">Thank
you<o:p></o:p></=
span></p <p
class=3D"MsoNormal"><span
style=3D"color:#1F497D"><o:p> </o:p></spa=
n></p <div <div
style=3D"border:none;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0cm =
0cm 0cm" <p
class=3D"MsoNormal"><b><span lang=3D"EN-US"
style=3D"mso-fareast-languag=
e:EN-GB">From:</span></b><span lang=3D"EN-US"
style=3D"mso-fareast-language=
:EN-GB"> Soeren Malchow [mailto:soeren.malchow@mcon.net]
<br <b>Sent:</b> 19 April 2015 14:48<br <b>To:</b> Bill Dossett; users(a)ovirt.org<br <b>Subject:</b> Re: [ovirt-users] bonding
interfaces<o:p></o:p></span></p
</div </div <p
class=3D"MsoNormal"><o:p> </o:p></p <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">Hi Bill=
,</span><span
style=3D"font-size:10.5pt;color:black;mso-fareast-language:EN=
-GB"><o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">First, =
i would strongly suggest that you check whether the interfaces are explcici=
tly NOT managed by NetworkManager, thats the way we do
it.<o:p></o:p></span=
></p </div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">We have=
something like this<o:p></o:p></span></p </div
<div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">—=
<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div
<div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">DEVICE=
=3Dovirtmgmt<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">TYPE=3D=
Bridge<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">DELAY=
=3D0<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">STP=3Do=
ff<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">ONBOOT=
=3Dyes<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">IPADDR=
=3D<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">NETMASK=
=3D<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">GATEWAY=
=3D<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">BOOTPRO=
TO=3Dnone<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">DEFROUT=
E=3Dyes<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">NM_CONT=
ROLLED=3Dno<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">HOTPLUG=
=3Dno<o:p></o:p></span></p
</div </div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">----<o:=
p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">And<o:p=
></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">—=
<o:p></o:p></span></p
</div <div
<div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">DEVICE=
=3Dbond0<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">BONDING=
_OPTS=3D'miimon=3D100 updelay=3D0 downdelay=3D0 mode=3D802.3ad xmit_hash_po=
licy=3Dlayer3+4'<o:p></o:p></span></p </div
<div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">BRIDGE=
=3Dovirtmgmt<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">ONBOOT=
=3Dyes<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">NM_CONT=
ROLLED=3Dno<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">HOTPLUG=
=3Dno<o:p></o:p></span></p
</div </div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">---<o:p=
></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">Physica=
l interfaces<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">—=
<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div
<div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">DEVICE=
=3Dp3p3<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">HWADDR=
=3D<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">MASTER=
=3Dbond0<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">SLAVE=
=3Dyes<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">ONBOOT=
=3Dyes<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">MTU=3D1=
500<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">NM_CONT=
ROLLED=3Dno<o:p></o:p></span></p
</div </div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">—=
<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">And we =
actually create all the interfaces BEFORE ovirt installation even though th=
e files will be regenerated after installing and configuring ovirt (vdsm)<o=
:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">That wo=
rks like a charm for us<o:p></o:p></span></p </div
<div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">Cheers<=
o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black">Soeren&=
nbsp;<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div
style=3D"border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm =
0cm 0cm" <p
class=3D"MsoNormal"><b><span
style=3D"color:black">From: </span></b><spa=
n style=3D"color:black">Bill Dossett <<a
href=3D"mailto:Bill.Dossett@pb.=
com">Bill.Dossett(a)pb.com</a>&gt;<br
<b>Date: </b>Thursday 16 April 2015 21:49<br <b>To: </b>"<a
href=3D"mailto:users@ovirt.org">users@ovirt.org</a>&quo=
t; <<a
href=3D"mailto:users@ovirt.org">users@ovirt.org</a>><br <b>Subject: </b>[ovirt-users] bonding
interfaces<o:p></o:p></span></p
</div <div <p
class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black"><o:p>&n=
bsp;</o:p></span></p
</div <div
<div <p
class=3D"MsoNormal"><span
style=3D"color:black">Hi,<o:p></o:p></span></p=
<p class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black">I had a Gluster Cluster =
running that I setup with oVirt engine… “had” being the o=
perative word here.<o:p></o:p></span></p <p
class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black">Today I connected the se=
cond network interface and then went to the host and tried to bond this int=
erface to the ovirt mgmt. network… this is where the “had”=
; part comes in ;-)<o:p></o:p></span></p <p
class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black">Now I have no working in=
terfaces at all, can’t ping in or out and all interfaces say they are=
down, en1, 2, ovrtmgmt and bond0 when I do an ip add (this is centos7)<o:p=
></o:p></span></p <p
class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black">I have done this quite a=
few times on RHEV clusters and it always worked well, very impressed with =
it.
<o:p></o:p></span></p <p
class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black">The differences are̷=
0;<o:p></o:p></span></p <p
class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black">RHEV cluster I was using=
trunked ports and VLANS<o:p></o:p></span></p <p class=3D"MsoNormal"><span
style=3D"color:black">RHEV I was using 6.4 or =
6.5 RHEL <o:p </o:p></span></p <p class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black">I think that’s it.=
<o:p></o:p></span></p <p
class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black">I haven’t really d=
ug into the /etc/sysconfig/network-scripts to see what normally goes into t=
he config files to create a bonded interface – only to see how to con=
figure my first interface with a vlan and then I
let ovirtengine do the rest for me as it worked so
wellI<o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black">I guess I may have to ri=
p it out and start over unless anyone has any tips on fixing it. It&#=
8217;s just PoC anyway, so learning.<o:p></o:p></span></p <p class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black">Thanks<o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <table class=3D"MsoNormalTable"
border=3D"0" cellspacing=3D"0" cellpadding=
=3D"0" width=3D"1280" style=3D"width:960.0pt" <tbody
<tr <td width=3D"640"
style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm" <p
class=3D"MsoNormal"><b><span
style=3D"font-size:10.0pt;font-family:"=
;Arial","sans-serif";color:#0082D5">Bill
Dossett</span></b><=
o:p></o:p></p <p
class=3D"MsoNormal"><span
style=3D"font-size:10.0pt;font-family:"Ar=
ial","sans-serif"">Systems
Architect</span><o:p></o:p></p
</td </tr
<tr <td width=3D"640"
style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm" <p
class=3D"MsoNormal"><b><span
style=3D"font-size:10.0pt;font-family:"=
;Arial","sans-serif"">Tech Central – Global
Engineerin=
g Services</span></b><o:p></o:p></p <p class=3D"MsoNormal"><span
style=3D"font-size:10.0pt;mso-fareast-language=
:EN-GB"> </span><o:p></o:p></p <p class=3D"MsoNormal"><b><span
style=3D"font-size:10.0pt;font-family:"=
;Arial","sans-serif"">T</span></b><span
style=3D"font-size:1=
0.0pt;font-family:"Arial","sans-serif""> +1
30=
3 440 3523</span><o:p></o:p></p <p
class=3D"MsoNormal"><b><span
style=3D"font-size:10.0pt;font-family:"=
;Arial","sans-serif"">M</span></b><span
style=3D"font-size:1=
0.0pt;font-family:"Arial","sans-serif""> +44
(=
0)777 590 8612</span><o:p></o:p></p <p
class=3D"MsoNormal"><span
style=3D"mso-fareast-language:EN-GB"><a href=
=3D"mailto:bill.dossett@pb.com"><span
style=3D"color:#954F72">bill.dossett@=
pb.com</span></a></span><o:p></o:p></p <p class=3D"MsoNormal"><span
style=3D"mso-fareast-language:EN-GB"><a href=
=3D"http://pitneybowes.com/"><span
style=3D"color:#954F72">pitneybowes.com<=
/span></a></span><o:p></o:p></p <p
class=3D"MsoNormal"><span
style=3D"font-size:10.0pt;mso-fareast-language=
:EN-GB"><br </span><b><span
style=3D"font-size:10.0pt;font-family:"Arial",&qu=
ot;sans-serif"">Pitney
Bowes</span></b><o:p></o:p></p <p
class=3D"MsoNormal"><span
style=3D"font-size:10.0pt;font-family:"Ar=
ial","sans-serif"">4750 Walnut Street | Boulder,
Colorado, 8=
0301 | USA</span><o:p></o:p></p <p
class=3D"MsoNormal"><span
style=3D"font-size:10.0pt;font-family:"Ar=
ial","sans-serif""> </span><o:p></o:p></p </td </tr
<tr <td width=3D"640"
style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm" <p
class=3D"MsoNormal"><span
style=3D"mso-fareast-language:EN-GB"> </s=
pan><o:p></o:p></p
</td </tr
<tr <td width=3D"640"
style=3D"width:480.0pt;padding:0cm 0cm 0cm 0cm" <p
class=3D"MsoNormal" style=3D"page-break-after:avoid"><span
style=3D"font=
-size:10.0pt;font-family:"Arial","sans-serif"">In
Engin=
eering?</span><o:p></o:p></p <p
class=3D"MsoNormal"><b><span
style=3D"font-size:10.0pt;font-family:"=
;Arial","sans-serif"">Raise a ticket via Remedy
Anywhere [<s=
pan style=3D"color:#0082D5"><a
href=3D"applewebdata://5D25CA10-0BA9-4233-9D=
DF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incid=
ent/newIncident.aspx"><span
style=3D"color:#0082D5">HERE</span></a></span>]=
<span style=3D"color:blue"> </span>takes
less than a minute</span></b><o:p></o:p></p <p class=3D"MsoNormal"><b><span
style=3D"font-size:10.0pt;font-family:"=
;Arial","sans-serif""> </span></b><o:p></o:p></p <p class=3D"MsoNormal"><b><span
style=3D"font-size:10.0pt;font-family:"=
;Arial","sans-serif"">CloudForms User Guide
available</span>=
</b><span
style=3D"font-size:10.0pt;font-family:"Arial","san=
s-serif""> [<b><span
style=3D"color:#0082D5"><a href=3D"https://d=
l.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.p=
df"><span
style=3D"color:#0082D5">HERE</span></a></span></b>]</span><o:p></=
o:p></p </td
</tr </tbody </table <p
class=3D"MsoNormal"><span
style=3D"color:black;mso-fareast-language:EN-G=
B"> </span><span
style=3D"color:black"><o:p></o:p></span></p <p class=3D"MsoNormal"><span
style=3D"color:black"> <o:p></o:p></span>=
</p <p class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black;mso-fare=
ast-language:EN-GB"><o:p> </o:p></span></p <div class=3D"MsoNormal"
align=3D"center" style=3D"text-align:center"><span=
style=3D"font-size:10.5pt;color:black;mso-fareast-language:EN-GB" <hr size=3D"2" width=3D"100%"
align=3D"center" </span></div <p class=3D"MsoNormal"><span
style=3D"font-size:10.5pt;color:black;mso-fare=
ast-language:EN-GB"><o:p> </o:p></span></p </div
</div </div <br <hr <font
face=3D"Arial" color=3D"Black" size=3D"2"><br </font
</body </html
--_000_B47F00825D68444ABC03733078275360377C5B4F013BR1MPN1013MG_--