3:36 a.m.
Hi,
When I install a host, it fails with:
2016-05-24 07:00:01,749 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to
Non-Operational, it is missing the following networks: 'ovirtmgmt'
2016-05-24 07:00:01,781 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job
ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event
ID: -1, Message: Host node3 does not comply with the cluster Default
networks, the following networks are missing on host: 'ovirtmgmt'
After I click the "Hosts" -> subtab "Network Interfaces" ->
"Setup Host
Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link
with eth0, then activate host "node3" successfully.
My question is how to make such manual operation automatically? Then I can
run some automatic tests.
Thanks a lot.
--Kai
3:57 a.m.
And network configurations on node:
[root at ovirt-node] # brctl show
bridge name bridge id STP enabled interfaces
docker0 8000.0242ae1de711 no
ovirtmgmt 8000.001320ff73aa no eth0
[root at ovirt-node] # ifconfig -a
docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11
inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6331 errors:0 dropped:0 overruns:0 frame:0
TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB)
Interrupt:20 Memory:d1100000-d1120000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:36 errors:0 dropped:0 overruns:0 frame:0
TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)
ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
inet addr:128.224.165.170 Bcast:128.224.165.255
Mask:255.255.255.0
inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link
inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6295 errors:0 dropped:6 overruns:0 frame:0
TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)
sit0 Link encap:UNSPEC HWaddr
00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Thanks,
Kai
On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang(a)gmail.com> wrote:
Hi,
When I install a host, it fails with:
2016-05-24 07:00:01,749 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to
Non-Operational, it is missing the following networks: 'ovirtmgmt'
2016-05-24 07:00:01,781 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job
ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event
ID: -1, Message: Host node3 does not comply with the cluster Default
networks, the following networks are missing on host: 'ovirtmgmt'
After I click the "Hosts" -> subtab "Network Interfaces" ->
"Setup Host
Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link
with eth0, then activate host "node3" successfully.
My question is how to make such manual operation automatically? Then I
can run some automatic tests.
Thanks a lot.
--Kai
5:47 a.m.
Hi,
I checked vdsm.log, it show error:
jsonrpc.Executor/0::DEBUG::2016-05-24
09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list 0-7
/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None)
jsonrpc.Executor/0::DEBUG::2016-05-24
09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback (most
recent call last):\n File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in
<module>\n
main()\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line
66, in main\n
stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError:
\'network\'\n\n'; <rc> = 2
jsonrpc.Executor/0::INFO::2016-05-24
09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent call
last):
File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in
<module>
main()
File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main
stats['network'].update(ovs_networks_stats(stats['network']))
KeyError: 'network'
I'm checking what wrong with it.
Thanks,
Kai
On Tue, May 24, 2016 at 3:57 PM, Kai Kang <kai.7.kang(a)gmail.com> wrote:
And network configurations on node:
[root at ovirt-node] # brctl show
bridge name bridge id STP enabled interfaces
docker0 8000.0242ae1de711 no
ovirtmgmt 8000.001320ff73aa no eth0
[root at ovirt-node] # ifconfig -a
docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11
inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6331 errors:0 dropped:0 overruns:0 frame:0
TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB)
Interrupt:20 Memory:d1100000-d1120000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:36 errors:0 dropped:0 overruns:0 frame:0
TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)
ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
inet addr:128.224.165.170 Bcast:128.224.165.255
Mask:255.255.255.0
inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link
inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6295 errors:0 dropped:6 overruns:0 frame:0
TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)
sit0 Link encap:UNSPEC HWaddr
00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Thanks,
Kai
On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang(a)gmail.com> wrote:
> Hi,
>
> When I install a host, it fails with:
>
> 2016-05-24 07:00:01,749 ERROR
> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
> (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to
> Non-Operational, it is missing the following networks: 'ovirtmgmt'
> 2016-05-24 07:00:01,781 WARN
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job
> ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event
> ID: -1, Message: Host node3 does not comply with the cluster Default
> networks, the following networks are missing on host: 'ovirtmgmt'
>
> After I click the "Hosts" -> subtab "Network Interfaces" ->
"Setup Host
> Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to
link
> with eth0, then activate host "node3" successfully.
>
> My question is how to make such manual operation automatically? Then I
> can run some automatic tests.
>
> Thanks a lot.
>
> --Kai
>
8:05 a.m.
This is a multi-part message in MIME format.
--------------330EFE126ADAB3CE49939284
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
are using the Open vSwitch hook intentionally? If not, you |yum remove
vdsm-hook-ovs for a while. What is your exact VDSM version?
|
Thanks, Ondra
On 24.5.2016 11:47, Kai Kang wrote:
Hi,
I checked vdsm.log, it show error:
jsonrpc.Executor/0::DEBUG::2016-05-24
09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list
0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None)
jsonrpc.Executor/0::DEBUG::2016-05-24
09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback
(most recent call last):\n File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in
<module>\n main()\n File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in
main\n
stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError:
\'network\'\n\n'; <rc> = 2
jsonrpc.Executor/0::INFO::2016-05-24
09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent
call last):
File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72,
in <module>
main()
File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66,
in main
stats['network'].update(ovs_networks_stats(stats['network']))
KeyError: 'network'
I'm checking what wrong with it.
Thanks,
Kai
On Tue, May 24, 2016 at 3:57 PM, Kai Kang <kai.7.kang(a)gmail.com
<mailto:kai.7.kang@gmail.com>> wrote:
And network configurations on node:
[root at ovirt-node] # brctl show
bridge name bridge id STP enabled interfaces
docker0 8000.0242ae1de711 no
ovirtmgmt 8000.001320ff73aa no eth0
[root at ovirt-node] # ifconfig -a
docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11
inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6331 errors:0 dropped:0 overruns:0 frame:0
TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB)
Interrupt:20 Memory:d1100000-d1120000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:36 errors:0 dropped:0 overruns:0 frame:0
TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)
ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
inet addr:128.224.165.170 Bcast:128.224.165.255
Mask:255.255.255.0
inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link
inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64
Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6295 errors:0 dropped:6 overruns:0 frame:0
TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)
sit0 Link encap:UNSPEC HWaddr
00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Thanks,
Kai
On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang(a)gmail.com
<mailto:kai.7.kang@gmail.com>> wrote:
Hi,
When I install a host, it fails with:
2016-05-24 07:00:01,749 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is
set to Non-Operational, it is missing the following networks:
'ovirtmgmt'
2016-05-24 07:00:01,781 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID:
1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call
Stack: null, Custom Event ID: -1, Message: Host node3 does not
comply with the cluster Default networks, the following
networks are missing on host: 'ovirtmgmt'
After I click the "Hosts" -> subtab "Network Interfaces"
->
"Setup Host Networks" on the web ui and drag ovirtmgmt to
"Assigned Logical" to link with eth0, then activate host
"node3" successfully.
My question is how to make such manual operation
automatically? Then I can run some automatic tests.
Thanks a lot.
--Kai
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--------------330EFE126ADAB3CE49939284
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Hi,<br>
<br>
are using the Open vSwitch hook intentionally? If not, you <code>yum
remove vdsm-hook-ovs for a while. What is your exact VDSM
version?<br>
<br>
</code></p>
<p>Thanks, Ondra<br>
</p>
<p><br>
</p>
<div class="moz-cite-prefix">On 24.5.2016 11:47, Kai Kang
wrote:<br>
</div>
<blockquote
cite="mid:CADC9KmoRQ18D0Kh1UCaLCyBa_MmYtRuVux0WkTOo21BUFf0-wA@mail.gmail.com"
type="cite">
<div dir="ltr">Hi,
<div><br>
</div>
<div>I checked vdsm.log, it show error:</div>
<div><br>
</div>
<div>
<div>jsonrpc.Executor/0::DEBUG::2016-05-24
09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset
--cpu-list 0-7
/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None)</div>
<div>jsonrpc.Executor/0::DEBUG::2016-05-24
09:46:04,136::utils::689::root::(execCmd) FAILED:
<err> = 'Traceback (most recent call last):\n File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line
72, in <module>\n main()\n File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line
66, in main\n
stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError:
\'network\'\n\n'; <rc> = 2</div>
<div>jsonrpc.Executor/0::INFO::2016-05-24
09:46:04,136::hooks::98::root::(_runHooksDir) Traceback
(most recent call last):</div>
<div> File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line
72, in <module></div>
<div> main()</div>
<div> File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line
66, in main</div>
<div>
stats['network'].update(ovs_networks_stats(stats['network']))</div>
<div>KeyError: 'network'</div>
</div>
<div><br>
</div>
<div><br>
</div>
<div>I'm checking what wrong with it.</div>
<div><br>
</div>
<div>Thanks,</div>
<div>Kai</div>
<div><br>
</div>
<div><br>
</div>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Tue, May 24, 2016 at 3:57 PM, Kai
Kang <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:kai.7.kang@gmail.com"
target="_blank">kai.7.kang(a)gmail.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">And network configurations on node:
<div><br>
</div>
<div>[root at ovirt-node] # brctl show<br>
</div>
<div>bridge name bridge id STP enabled
interfaces</div>
<div>docker0 8000.0242ae1de711 no</div>
<div>ovirtmgmt 8000.001320ff73aa no
eth0</div>
<div><br>
</div>
<div>[root at ovirt-node] # ifconfig -a<br>
</div>
<div>
<div>docker0 Link encap:Ethernet HWaddr
02:42:ae:1d:e7:11</div>
<div> inet addr:172.17.0.1 Bcast:0.0.0.0
Mask:255.255.0.0</div>
<div> UP BROADCAST MULTICAST MTU:1500
Metric:1</div>
<div> RX packets:0 errors:0 dropped:0
overruns:0 frame:0</div>
<div> TX packets:0 errors:0 dropped:0
overruns:0 carrier:0</div>
<div> collisions:0 txqueuelen:0</div>
<div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div>
<div><br>
</div>
<div>eth0 Link encap:Ethernet HWaddr
00:13:20:ff:73:aa</div>
<div> UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1</div>
<div> RX packets:6331 errors:0 dropped:0
overruns:0 frame:0</div>
<div> TX packets:2866 errors:0 dropped:0
overruns:0 carrier:0</div>
<div> collisions:0 txqueuelen:1000</div>
<div> RX bytes:762182 (744.3 KiB) TX
bytes:210611 (205.6 KiB)</div>
<div> Interrupt:20 Memory:d1100000-d1120000</div>
<div><br>
</div>
<div>lo Link encap:Local Loopback</div>
<div> inet addr:127.0.0.1 Mask:255.0.0.0</div>
<div> inet6 addr: ::1/128 Scope:Host</div>
<div> UP LOOPBACK RUNNING MTU:65536 Metric:1</div>
<div> RX packets:36 errors:0 dropped:0
overruns:0 frame:0</div>
<div> TX packets:36 errors:0 dropped:0
overruns:0 carrier:0</div>
<div> collisions:0 txqueuelen:0</div>
<div> RX bytes:2478 (2.4 KiB) TX bytes:2478
(2.4 KiB)</div>
<div><br>
</div>
<div>ovirtmgmt Link encap:Ethernet HWaddr
00:13:20:ff:73:aa</div>
<div> inet addr:128.224.165.170
Bcast:128.224.165.255 Mask:255.255.255.0</div>
<div> inet6 addr: fe80::213:20ff:feff:73aa/64
Scope:Link</div>
<div> inet6 addr:
11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global</div>
<div> UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1</div>
<div> RX packets:6295 errors:0 dropped:6
overruns:0 frame:0</div>
<div> TX packets:2831 errors:0 dropped:0
overruns:0 carrier:0</div>
<div> collisions:0 txqueuelen:0</div>
<div> RX bytes:644421 (629.3 KiB) TX
bytes:177616 (173.4 KiB)</div>
<div><br>
</div>
<div>sit0 Link encap:UNSPEC HWaddr
00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00</div>
<div> NOARP MTU:1480 Metric:1</div>
<div> RX packets:0 errors:0 dropped:0
overruns:0 frame:0</div>
<div> TX packets:0 errors:0 dropped:0
overruns:0 carrier:0</div>
<div> collisions:0 txqueuelen:0</div>
<div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div>
<div><br>
</div>
<div>wlan0 Link encap:Ethernet HWaddr
80:86:f2:8b:1d:cf</div>
<div> BROADCAST MULTICAST MTU:1500 Metric:1</div>
<div> RX packets:0 errors:0 dropped:0
overruns:0 frame:0</div>
<div> TX packets:0 errors:0 dropped:0
overruns:0 carrier:0</div>
</div>
<div>
<div> collisions:0 txqueuelen:1000</div>
<div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div>
</div>
<div><br>
</div>
<div><br>
</div>
<div>Thanks,</div>
<div>Kai</div>
<div><br>
</div>
<div><br>
</div>
</div>
<div class="HOEnZb">
<div class="h5">
<div class="gmail_extra"><br>
<div class="gmail_quote">On Tue, May 24, 2016 at 3:36
PM, Kai Kang <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:kai.7.kang@gmail.com"
target="_blank"><a
class="moz-txt-link-abbreviated"
href="mailto:kai.7.kang@gmail.com">kai.7.kang@gmail.com</a></a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">Hi,
<div><br>
</div>
<div>When I install a host, it fails with:</div>
<div><br>
</div>
<div>
<div>2016-05-24 07:00:01,749 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4]
Host 'node3' is set to Non-Operational, it
is missing the following networks:
'ovirtmgmt'</div>
<div>2016-05-24 07:00:01,781 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4]
Correlation ID: 1bf36cd4, Job ID:
db281e8f-67cc-441a-b44c-90b135e509bd, Call
Stack: null, Custom Event ID: -1, Message:
Host node3 does not comply with the cluster
Default networks, the following networks are
missing on host: 'ovirtmgmt'</div>
</div>
<div><br>
</div>
<div>After I click the "Hosts" -> subtab
"Network Interfaces" -> "Setup Host
Networks" on the web ui and drag ovirtmgmt to
"Assigned Logical" to link with eth0, then
activate host "node3" successfully.</div>
<div><br>
</div>
<div>My question is how to make such manual
operation automatically? Then I can run some
automatic tests.</div>
<div><br>
</div>
<div>Thanks a lot.</div>
<span><font color="#888888">
<div><br>
</div>
<div>--Kai</div>
</font></span></div>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
</body>
</html>
--------------330EFE126ADAB3CE49939284--
8:43 a.m.
This is a multi-part message in MIME format.
--------------9AB0A24FAC68ED057BB1A55E
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 7bit
Hi again, (correcting myself a bit)
are using the Open vSwitch hook intentionally? If not, you can |yum
remove vdsm-hook-ovs| for a while. What is your exact VDSM version?
Also, can you give a little more context from your vdsm.log, and also
from supervdsm.log? I think the vdsm.log failure is only related to
stats reporting, and is not the root problem.
If you don't have any confidential information in the logs (or you can
remove it), I suggest that you open a bug on product=vdsm at
https://bugzilla.redhat.com/ Have no fear about naming the bug, it can
be renamed if necessary.
Thanks, Ondra
On 24.5.2016 11:47, Kai Kang wrote:
> Hi,
>
> I checked vdsm.log, it show error:
>
> jsonrpc.Executor/0::DEBUG::2016-05-24
> 09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list
> 0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None)
> jsonrpc.Executor/0::DEBUG::2016-05-24
> 09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback
> (most recent call last):\n File
> "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in
> <module>\n main()\n File
> "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in
> main\n
>
stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError:
> \'network\'\n\n'; <rc> = 2
> jsonrpc.Executor/0::INFO::2016-05-24
> 09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent
> call last):
> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72,
> in <module>
> main()
> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66,
> in main
> stats['network'].update(ovs_networks_stats(stats['network']))
> KeyError: 'network'
>
>
> I'm checking what wrong with it.
>
> Thanks,
> Kai
>
>
>
> On Tue, May 24, 2016 at 3:57 PM, Kai Kang <kai.7.kang(a)gmail.com
> <mailto:kai.7.kang@gmail.com>> wrote:
>
> And network configurations on node:
>
> [root at ovirt-node] # brctl show
> bridge name bridge id STP enabled interfaces
> docker0 8000.0242ae1de711 no
> ovirtmgmt 8000.001320ff73aa no eth0
>
> [root at ovirt-node] # ifconfig -a
> docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11
> inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0
> UP BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:6331 errors:0 dropped:0 overruns:0 frame:0
> TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB)
> Interrupt:20 Memory:d1100000-d1120000
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:65536 Metric:1
> RX packets:36 errors:0 dropped:0 overruns:0 frame:0
> TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)
>
> ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
> inet addr:128.224.165.170 Bcast:128.224.165.255
> Mask:255.255.255.0
> inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link
> inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64
> Scope:Global
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:6295 errors:0 dropped:6 overruns:0 frame:0
> TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)
>
> sit0 Link encap:UNSPEC HWaddr
> 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00
> NOARP MTU:1480 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
>
> Thanks,
> Kai
>
>
>
> On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang(a)gmail.com>
> wrote:
>
> Hi,
>
> When I install a host, it fails with:
>
> 2016-05-24 07:00:01,749 ERROR
> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
> (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is
> set to Non-Operational, it is missing the following networks:
> 'ovirtmgmt'
> 2016-05-24 07:00:01,781 WARN
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID:
> 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call
> Stack: null, Custom Event ID: -1, Message: Host node3 does
> not comply with the cluster Default networks, the following
> networks are missing on host: 'ovirtmgmt'
>
> After I click the "Hosts" -> subtab "Network
Interfaces" ->
> "Setup Host Networks" on the web ui and drag ovirtmgmt to
> "Assigned Logical" to link with eth0, then activate host
> "node3" successfully.
>
> My question is how to make such manual operation
> automatically? Then I can run some automatic tests.
>
> Thanks a lot.
>
> --Kai
>
>
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
--------------9AB0A24FAC68ED057BB1A55E
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Hi again, (correcting myself a bit)<br>
<br>
are using the Open vSwitch hook intentionally? If not, you can <code>yum
remove vdsm-hook-ovs</code> for a while. What is your exact VDSM
version?<br>
<br>
Also, can you give a little more context from your vdsm.log, and
also from supervdsm.log? I think the vdsm.log failure is only
related to stats reporting, and is not the root problem.<br>
<br>
If you don't have any confidential information in the logs (or you
can remove it), I suggest that you open a bug on product=vdsm at
<a class="moz-txt-link-freetext"
href="https://bugzilla.redhat.com/">https://bugzilla.redhat....
Have no fear about naming the bug, it
can be renamed if necessary.<br>
<br>
Thanks, Ondra<br>
<blockquote
cite="mid:0507c822-dc60-a85a-ede2-3ca902820f61@svobodasoft.cz"
type="cite"> </blockquote>
<br>
<blockquote
cite="mid:0507c822-dc60-a85a-ede2-3ca902820f61@svobodasoft.cz"
type="cite">
<div class="moz-cite-prefix">On 24.5.2016 11:47, Kai Kang
wrote:<br>
</div>
<blockquote
cite="mid:CADC9KmoRQ18D0Kh1UCaLCyBa_MmYtRuVux0WkTOo21BUFf0-wA@mail.gmail.com"
type="cite">
<div dir="ltr">Hi,
<div><br>
</div>
<div>I checked vdsm.log, it show error:</div>
<div><br>
</div>
<div>
<div>jsonrpc.Executor/0::DEBUG::2016-05-24
09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset
--cpu-list 0-7
/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd
None)</div>
<div>jsonrpc.Executor/0::DEBUG::2016-05-24
09:46:04,136::utils::689::root::(execCmd) FAILED:
<err> = 'Traceback (most recent call last):\n File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line
72, in <module>\n main()\n File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line
66, in main\n
stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError:
\'network\'\n\n'; <rc> = 2</div>
<div>jsonrpc.Executor/0::INFO::2016-05-24
09:46:04,136::hooks::98::root::(_runHooksDir) Traceback
(most recent call last):</div>
<div> File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line
72, in <module></div>
<div> main()</div>
<div> File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line
66, in main</div>
<div>
stats['network'].update(ovs_networks_stats(stats['network']))</div>
<div>KeyError: 'network'</div>
</div>
<div><br>
</div>
<div><br>
</div>
<div>I'm checking what wrong with it.</div>
<div><br>
</div>
<div>Thanks,</div>
<div>Kai</div>
<div><br>
</div>
<div><br>
</div>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Tue, May 24, 2016 at 3:57 PM, Kai
Kang <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:kai.7.kang@gmail.com"
target="_blank">kai.7.kang(a)gmail.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">And network configurations on node:
<div><br>
</div>
<div>[root at ovirt-node] # brctl show<br>
</div>
<div>bridge name bridge id STP enabled
interfaces</div>
<div>docker0 8000.0242ae1de711 no</div>
<div>ovirtmgmt 8000.001320ff73aa no
eth0</div>
<div><br>
</div>
<div>[root at ovirt-node] # ifconfig -a<br>
</div>
<div>
<div>docker0 Link encap:Ethernet HWaddr
02:42:ae:1d:e7:11</div>
<div> inet addr:172.17.0.1 Bcast:0.0.0.0
Mask:255.255.0.0</div>
<div> UP BROADCAST MULTICAST MTU:1500
Metric:1</div>
<div> RX packets:0 errors:0 dropped:0
overruns:0 frame:0</div>
<div> TX packets:0 errors:0 dropped:0
overruns:0 carrier:0</div>
<div> collisions:0 txqueuelen:0</div>
<div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div>
<div><br>
</div>
<div>eth0 Link encap:Ethernet HWaddr
00:13:20:ff:73:aa</div>
<div> UP BROADCAST RUNNING MULTICAST
MTU:1500 Metric:1</div>
<div> RX packets:6331 errors:0 dropped:0
overruns:0 frame:0</div>
<div> TX packets:2866 errors:0 dropped:0
overruns:0 carrier:0</div>
<div> collisions:0 txqueuelen:1000</div>
<div> RX bytes:762182 (744.3 KiB) TX
bytes:210611 (205.6 KiB)</div>
<div> Interrupt:20 Memory:d1100000-d1120000</div>
<div><br>
</div>
<div>lo Link encap:Local Loopback</div>
<div> inet addr:127.0.0.1 Mask:255.0.0.0</div>
<div> inet6 addr: ::1/128 Scope:Host</div>
<div> UP LOOPBACK RUNNING MTU:65536
Metric:1</div>
<div> RX packets:36 errors:0 dropped:0
overruns:0 frame:0</div>
<div> TX packets:36 errors:0 dropped:0
overruns:0 carrier:0</div>
<div> collisions:0 txqueuelen:0</div>
<div> RX bytes:2478 (2.4 KiB) TX bytes:2478
(2.4 KiB)</div>
<div><br>
</div>
<div>ovirtmgmt Link encap:Ethernet HWaddr
00:13:20:ff:73:aa</div>
<div> inet addr:128.224.165.170
Bcast:128.224.165.255 Mask:255.255.255.0</div>
<div> inet6 addr: fe80::213:20ff:feff:73aa/64
Scope:Link</div>
<div> inet6 addr:
11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global</div>
<div> UP BROADCAST RUNNING MULTICAST
MTU:1500 Metric:1</div>
<div> RX packets:6295 errors:0 dropped:6
overruns:0 frame:0</div>
<div> TX packets:2831 errors:0 dropped:0
overruns:0 carrier:0</div>
<div> collisions:0 txqueuelen:0</div>
<div> RX bytes:644421 (629.3 KiB) TX
bytes:177616 (173.4 KiB)</div>
<div><br>
</div>
<div>sit0 Link encap:UNSPEC HWaddr
00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00</div>
<div> NOARP MTU:1480 Metric:1</div>
<div> RX packets:0 errors:0 dropped:0
overruns:0 frame:0</div>
<div> TX packets:0 errors:0 dropped:0
overruns:0 carrier:0</div>
<div> collisions:0 txqueuelen:0</div>
<div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div>
<div><br>
</div>
<div>wlan0 Link encap:Ethernet HWaddr
80:86:f2:8b:1d:cf</div>
<div> BROADCAST MULTICAST MTU:1500
Metric:1</div>
<div> RX packets:0 errors:0 dropped:0
overruns:0 frame:0</div>
<div> TX packets:0 errors:0 dropped:0
overruns:0 carrier:0</div>
</div>
<div>
<div> collisions:0 txqueuelen:1000</div>
<div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div>
</div>
<div><br>
</div>
<div><br>
</div>
<div>Thanks,</div>
<div>Kai</div>
<div><br>
</div>
<div><br>
</div>
</div>
<div class="HOEnZb">
<div class="h5">
<div class="gmail_extra"><br>
<div class="gmail_quote">On Tue, May 24, 2016 at
3:36 PM, Kai Kang <span dir="ltr"><<a
moz-do-not-send="true"
class="moz-txt-link-abbreviated"
href="mailto:kai.7.kang@gmail.com"><a
class="moz-txt-link-abbreviated"
href="mailto:kai.7.kang@gmail.com">kai.7.kang@gmail.com</a></a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0
0 .8ex;border-left:1px #ccc
solid;padding-left:1ex">
<div dir="ltr">Hi,
<div><br>
</div>
<div>When I install a host, it fails with:</div>
<div><br>
</div>
<div>
<div>2016-05-24 07:00:01,749 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(DefaultQuartzScheduler_Worker-4)
[1bf36cd4] Host 'node3' is set to
Non-Operational, it is missing the
following networks: 'ovirtmgmt'</div>
<div>2016-05-24 07:00:01,781 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler_Worker-4)
[1bf36cd4] Correlation ID: 1bf36cd4, Job
ID: db281e8f-67cc-441a-b44c-90b135e509bd,
Call Stack: null, Custom Event ID: -1,
Message: Host node3 does not comply with
the cluster Default networks, the
following networks are missing on host:
'ovirtmgmt'</div>
</div>
<div><br>
</div>
<div>After I click the "Hosts" -> subtab
"Network Interfaces" -> "Setup Host
Networks" on the web ui and drag ovirtmgmt
to "Assigned Logical" to link with eth0,
then activate host "node3"
successfully.</div>
<div><br>
</div>
<div>My question is how to make such manual
operation automatically? Then I can run
some automatic tests.</div>
<div><br>
</div>
<div>Thanks a lot.</div>
<span><font color="#888888">
<div><br>
</div>
<div>--Kai</div>
</font></span></div>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
</blockquote>
<br>
</body>
</html>
--------------9AB0A24FAC68ED057BB1A55E--
3140
days inactive
3140
days old
4 comments
2 participants
participants (2)
-
Kai Kang -
Ondřej Svoboda