Your nodes should have separate drives for node image. The installer will expect empty block device for gluster setup. I would do a separate array for OS and storage. Most of your node specific questions I think can be cleared up if you think of the storage as being networked storage. Even though the nodes are acting as storage they are gluster clients mounting the shares. If you create a vm the storage doesn’t go to one specific node. Since the data is mounted over network you can run vms from any node. On Thu, Nov 7, 2019 at 9:39 AM Christian Reiss <email(a)christian-reiss.de&gt; wrote:

Hello Christian, here are some useful links https://www.ovirt.org/documentation/gluster-hyperconverged/Gluster_Hyperc... https://access.redhat.com/documentation/en-us/red_hat_hyperconverged_infr... You need to have at least 1 device for the O/S node install and at least 1 device for the bricks, so ideally mirror 2 for the O/S and raid the rest + spare. a) Yes the the oVirt node installer has a hyperconverged/gluster mode. b) The storage will be shared between all 3 nodes and distributed to bricks on all 3 nodes. c) The VM can start and migrate on / to all nodes if all requirements are met (mem/cpu/networks) as the storage is shared. d) I don't think so e) storage network should not die VMs will probably be paused and if nodes lose access to storage on the master storage domain I think the engine will restart them depending on fencing policy. The gluster network should be a separate from the front-end network and use bonds for resilience. f) yes you can add more shared storage domains using ISCSI, FC, NFS external gluster storage with ISCSI it may be better to use multipath connections rather than a bond. Regards, Paul S. ________________________________ From: Christian Reiss <email(a)christian-reiss.de&gt; Sent: 07 November 2019 13:29 To: users <users(a)ovirt.org&gt; Subject: [ovirt-users] Quick generic Questions Hey folks, I am looking at setting up a hyperconverged cluster with 3 nodes (and oVirt 4.3). Before setting up I have some generic questions that I would love to get hints or even an answer on. First off, the Servers are outfittet with 24 (SSD) drives each in a HW-RAID. Due to wear-leveling and speed I am looking at RAID10. So I would end up with one giant sda device. a) Partitioning Using oVirt node installer which will use the full size of /dev/sda is this still the right solution to Hyperconverged given the gluster issue? If I understood it correctly gluster is using empty drives or partitions so a fully utilized drive is of no use here. Does oVirt node installer have a hyperconverged/ gluster mode? b) Storage Location In this 3 node cluster, creating a VM on node01 will the data for node01 always end up in the local node01 server? c) Starting VMs Can a VM be migrated or launched from node03 if the data resides on node01 and node02 (copies 2 with arbiter). d) Efficiency / High IO Load If node01 has high IO Load would additional data be loaded from the other node which has the copy to even the load? I am aware Virtuozzo does this. e) Storage Network dies What would happen with node01, node02 and node03 are operational but only the storage network dies (frontend is still alive as are the nodes). f) external isci/ FreeNAS We have a FreeNAS system with tons of space and fast network connectivity. Can oVirt handle storage import like remote iscsi target and run VMs on the ovirt nodes but store data there? Thank you for your time to clear this up. I have found many approaches out there that either are old (oVirt 3) or even contradict themselves (talk about RAID level...) Cheers! -Christian. -- Christian Reiss - email(a)christian-reiss.de /"\ ASCII Ribbon support(a)alpha-labs.net \ / Campaign X against HTML WEB alpha-labs.net / \ in eMails GPG Retrieval https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgpg.chr... GPG ID ABCD43C5, 0x44E29126ABCD43C5 GPG fingerprint = 9549 F537 2596 86BA 733C A4ED 44E2 9126 ABCD 43C5 "It's better to reign in hell than to serve in heaven.", John Milton, Paradise lost. _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovi... oVirt Code of Conduct: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovi... List Archives: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.o... To view the terms under which this email is distributed, please go to:- http://leedsbeckett.ac.uk/disclaimer/email/