9:44 a.m.
------=_Part_9727235_2133361016.1388475877246
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log)
but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
----- Original Message -----
From: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
To: "Meital Bourvine" <mbourvin(a)redhat.com>
Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine <
mbourvin(a)redhat.com >
wrote:
> Engine log can be found on the engine (while vdsm.log is on the
host).
> The full path is - /var/log/ovirt-engine/engine.log
> audit.log - /var/log/audit/audit.log
> About the vdsm log - I don't see any error there, I think
that you cut too
> much from it.
> > From: "Nauman Abbas" <
nauman.abbas(a)seecs.edu.pk >
>
> > To: "Meital Bourvine" < mbourvin(a)redhat.com >
>
> > Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
>
> > Sent: Tuesday, December 31, 2013 8:42:43 AM
>
> > Subject: Re: [Users] VM not starting up
>
> > Hello Meital
>
> > SELinux is off. The cluster doesn't work if SELinux is
on, my hosts and
> > storage is showing up as okay but VM is not starting up.
>
> > I've managed to get vdsm.log but cannot find engine.log
and audit.log.
> > Sorry
> > for being a noob, if you can tell me the path to these files I'll send
> > them
> > right away.
>
> > On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine <
mbourvin(a)redhat.com >
> > wrote:
>
> > > Hi Nauman,
> >
>
> > > Maybe it's a selinux issue?
> >
>
> > > Please try running `setenforce 0` before starting the vm.
> >
>
> > > Also please attach engine.log, vdsm.log, and
audit.log
> >
>
> > > > From: "Nauman Abbas" <
nauman.abbas(a)seecs.edu.pk >
> > >
> >
>
> > > > To: " users(a)ovirt.org " < Users(a)ovirt.org >
> > >
> >
>
> > > > Sent: Tuesday, December 31, 2013 7:13:01 AM
> > >
> >
>
> > > > Subject: [Users] VM not starting up
> > >
> >
>
> > > > Hello all,
> > >
> >
>
> > > > First of all thank you for your help, I've
finally managed to get my
> > > > Cluster
> > > > configured properly but now that I create VMs I'm facing another
> > > > problem.
> > > > Whenever I start my VM I get this error.
> > >
> >
>
> > > > " VM TestVm is down. Exit message: Child
quit during startup
> > > > handshake:
> > > > Input/output error."
> > >
> >
>
> > > > I've googled around but haven't found any
satisfactory solution. If
> > > > anyone
> > > > can help out it would be great.
> > >
> >
>
> > > > Regards
> > >
> >
>
> > > > Nauman Abbas
> > >
> >
>
> > > > Assistant System Administrator (LMS),
> > >
> >
>
> > > > Room No. A-207, SEECS,
> > >
> >
>
> > > > National University of Sciences & Technology,
> > >
> >
>
> > > > + 92 321 5359946
> > >
> >
>
> > > > _______________________________________________
> > >
> >
>
> > > > Users mailing list
> > >
> >
>
> > > > Users(a)ovirt.org
> > >
> >
>
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> >
>
>
--
>
> > Nauman Abbas
>
> > Assistant System Administrator (LMS),
>
> > Room No. A-207, SEECS,
>
> > National University of Sciences & Technology,
>
> > + 92 321 5359946
>
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
------=_Part_9727235_2133361016.1388475877246
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: times new roman, new york,
times, se=
rif; font-size: 12pt; color: #000000"><div>Are you sure that vdsm is
runnin=
g?<br></div><div><br></div><div>The error happened at
2013-12-31 11:32:56,9=
99 (engine.log)<br></div><div>but the last line in vdsm.log is from
2013-12=
-31 07:20:50,807<br></div><div><br></div><div>Also
make sure that your cloc=
ked are synced.
<br></div><div><br></div><div><br></div><hr
id=3D"zwchr"><b=
lockquote style=3D"border-left:2px solid #1010FF;margin-left:5px;padding-le=
ft:5px;color:#000;font-weight:normal;font-style:normal;text-decoration:none=
;font-family:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From:
</b>"Naum=
an Abbas" &lt;nauman.abbas(a)seecs.edu.pk&gt;<br><b>To:
</b>"Meital Bourvine"=
&lt;mbourvin(a)redhat.com&gt;<br><b>Cc:
</b>"users(a)ovirt.org" <Users@ovir=
t.org><br><b>Sent: </b>Tuesday, December 31, 2013 9:39:09
AM<br><b>Subje=
ct: </b>Re: [Users] VM not starting
up<br><div><br></div><div dir=3D"ltr">S=
ending files one by one. Vdsm.log</div><div
class=3D"gmail_extra"><br><div>=
<br></div><div class=3D"gmail_quote">On Tue, Dec 31, 2013 at
11:48 AM, Meit=
al Bourvine <span dir=3D"ltr"><<a
href=3D"mailto:mbourvin@redhat.com" ta=
rget=3D"_blank">mbourvin(a)redhat.com</a>&gt;</span>
wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0
.8ex;border-left:1p=
x #ccc solid;padding-left:1ex"><div><div
style=3D"font-size:12pt;font-famil=
y:times new roman,new york,times,serif"><div>Engine log can be found on
the=
engine (while vdsm.log is on the host). </div>
<div>The full path is -
/var/log/ovirt-engine/engine.log<br></div><div><br>=
</div><div>audit.log -
/var/log/audit/audit.log<br></div><div><br></div><di=
v>About the vdsm log - I don't see any error there, I think that you cut to=
o much from it.<br>
</div><div><br></div><hr><blockquote
style=3D"padding-left:5px;font-size:12=
pt;font-style:normal;margin-left:5px;font-family:Helvetica,Arial,sans-serif=
;text-decoration:none;font-weight:normal;border-left:2px solid
#1010ff"><b>=
From: </b>"Nauman Abbas" <<a
href=3D"mailto:nauman.abbas@seecs.edu.pk" t=
arget=3D"_blank">nauman.abbas(a)seecs.edu.pk</a>&gt;<br>
<b>To: </b>"Meital Bourvine" <<a
href=3D"mailto:mbourvin@redhat.com" tar=
get=3D"_blank">mbourvin(a)redhat.com</a>&gt;<br><b>Cc:
</b>"<a href=3D"mailto=
:users@ovirt.org" target=3D"_blank">users(a)ovirt.org</a>"
<<a href=3D"mai=
lto:Users@ovirt.org"
target=3D"_blank">Users(a)ovirt.org</a>&gt;<br>
<b>Sent: </b>Tuesday, December 31, 2013 8:42:43 AM<br><b>Subject:
</b>Re: [=
Users] VM not starting up<div><div
class=3D"h5"><br><div><br></div><div dir=
=3D"ltr">Hello Meital<div><br></div><div>SELinux is
off. The cluster doesn'=
t work if SELinux is on, my hosts and storage is showing up as okay but VM =
is not starting up. </div>
<div><br></div><div>I've managed to get vdsm.log but cannot
find engine.log=
and audit.log. Sorry for being a noob, if you can tell me the path to thes=
e files I'll send them right away. </div>
</div><div
class=3D"gmail_extra"><br><div><br></div><div
class=3D"gmail_quo=
te">On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine <span
dir=3D"ltr"><=
;<a href=3D"mailto:mbourvin@redhat.com"
target=3D"_blank">mbourvin(a)redhat.c=
om</a>></span> wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0
.8ex;border-left:1p=
x #ccc solid;padding-left:1ex"><div><div
style=3D"font-size:12pt;font-famil=
y:times new roman,new york,times,serif"><div>Hi
Nauman,<br></div><div><br><=
/div>
<div>Maybe it's a selinux issue?<br></div><div>Please try
running `setenfor=
ce 0` before starting the
vm.<br></div><div><br></div><div>Also please atta=
ch engine.log, vdsm.log, and
audit.log<br></div><div><br></div><hr>
<blockquote style=3D"padding-left:5px;font-size:12pt;font-style:normal;marg=
in-left:5px;font-family:Helvetica,Arial,sans-serif;text-decoration:none;fon=
t-weight:normal;border-left:2px solid #1010ff"><b>From:
</b>"Nauman Abbas" =
<<a href=3D"mailto:nauman.abbas@seecs.edu.pk"
target=3D"_blank">nauman.a=
bbas(a)seecs.edu.pk</a>&gt;<br>
<b>To: </b>"<a href=3D"mailto:users@ovirt.org"
target=3D"_blank">users@ovir=
t.org</a>" <<a href=3D"mailto:Users@ovirt.org"
target=3D"_blank">Users@o=
virt.org</a>><br><b>Sent: </b>Tuesday, December 31, 2013
7:13:01 AM<br>
<b>Subject: </b>[Users] VM not starting
up<div><div><br><div><br></div><div=
dir=3D"ltr">Hello all,<div><br></div><div>First of
all thank you for your =
help, I've finally managed to get my Cluster configured properly but now th=
at I create VMs I'm facing another problem. Whenever I start my VM I get th=
is error. </div>
<div><br></div><div>"<span
style=3D"color:rgb(255,255,255);font-family:'Ari=
al Unicode MS',Arial,sans-serif;line-height:25.98958396911621px;white-space=
:nowrap;background-color:rgb(102,102,102)">VM TestVm is down. Exit message:=
Child quit during startup handshake: Input/output error."</span</div>
<div><br></div><div>I've googled around but haven't found
any satisfactory =
solution. If anyone can help out it would be
great. </div><div><br></d=
iv><div>Regards</div><div><div
dir=3D"ltr"><div><br></div><span style=3D"co=
lor:#3d85c6">Nauman Abbas<br>
</span><div><div><span
style=3D"color:#3d85c6"><span>Assistant System Admi=
nistrator</span><span
style=3D"font-size:small"> (LMS),</span></span><=
/div><div><span style=3D"color:#3d85c6">Room No. A-207,
SEECS,</span</div>
<div><span
style=3D"color:#3d85c6">National University of Sciences & Te=
chnology,</span></div><div><a><span
style=3D"color:#3d85c6">+ 92 321 535994=
6</span></a><br></div></div></div></div</div>
<br></div></div>_______________________________________________<br>Users
ma=
iling list<br><a href=3D"mailto:Users@ovirt.org"
target=3D"_blank">Users@ov=
irt.org</a><br><a
href=3D"http://lists.ovirt.org/mailman/listinfo/users" ta=
rget=3D"_blank">http://lists.ovirt.org/mailman/listinfo/user...
</blockquote><div><br></div></div></div></blockquote></div><br><br
clear=3D=
"all"><div><br></div>-- <br><div
dir=3D"ltr"><div><br></div><span style=3D"=
color:#3d85c6">Nauman Abbas<br></span><div><div><span
style=3D"color:#3d85c=
6"><span>Assistant System Administrator</span><span
style=3D"font-size:smal=
l"> (LMS),</span></span</div>
<div><span style=3D"color:#3d85c6">Room No. A-207,
SEECS,</span></div><div>=
<span style=3D"color:#3d85c6">National University of Sciences &
Technol=
ogy,</span></div><div><a><span
style=3D"color:#3d85c6">+ 92 321 5359946</sp=
an></a><br>
</div>
</div</div>
</div>
</div></div></blockquote><div><br></div></div></div></blockquote></div><br>=
<br clear=3D"all"><div><br></div>-- <br><div
dir=3D"ltr"><div><br></div><sp=
an style=3D"color: #3d85c6;" data-mce-style=3D"color: #3d85c6;"
color=3D"#3=
d85c6">Nauman Abbas<br></span><div><div><span
style=3D"color: #3d85c6;" dat=
a-mce-style=3D"color: #3d85c6;"
color=3D"#3d85c6"><span>Assistant System Ad=
ministrator</span><span
style=3D"font-size:small"> (LMS),</span></span=
</div>
<div><span style=3D"color:
#3d85c6;" data-mce-style=3D"color: #3d85c6;" col=
or=3D"#3d85c6">Room No. A-207,
SEECS,</span></div><div><span style=3D"color=
: #3d85c6;" data-mce-style=3D"color: #3d85c6;"
color=3D"#3d85c6">National U=
niversity of Sciences &
Technology,</span></div><div><a><span style=3D"=
color: #3d85c6;" data-mce-style=3D"color: #3d85c6;"
color=3D"#3d85c6">+ 92 =
321 5359946</span></a><br data-mce-bogus=3D"1"</div>
</div</div>
</div>
</blockquote><div><br></div></div></body></html>
------=_Part_9727235_2133361016.1388475877246--
11:47 a.m.
New subject: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine
clock was 5 hours ahead of Node clock. I've corrected that but still the
same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine <mbourvin(a)redhat.com>wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log)
but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
------------------------------
*From: *"Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
*To: *"Meital Bourvine" <mbourvin(a)redhat.com>
*Cc: *"users(a)ovirt.org" <Users(a)ovirt.org>
*Sent: *Tuesday, December 31, 2013 9:39:09 AM
*Subject: *Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine <mbourvin(a)redhat.com>wrote:
> Engine log can be found on the engine (while vdsm.log is on the host).
> The full path is - /var/log/ovirt-engine/engine.log
>
> audit.log - /var/log/audit/audit.log
>
> About the vdsm log - I don't see any error there, I think that you cut
> too much from it.
>
> ------------------------------
>
> *From: *"Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
> *To: *"Meital Bourvine" <mbourvin(a)redhat.com>
> *Cc: *"users(a)ovirt.org" <Users(a)ovirt.org>
> *Sent: *Tuesday, December 31, 2013 8:42:43 AM
> *Subject: *Re: [Users] VM not starting up
>
>
> Hello Meital
>
> SELinux is off. The cluster doesn't work if SELinux is on, my hosts and
> storage is showing up as okay but VM is not starting up.
>
> I've managed to get vdsm.log but cannot find engine.log and audit.log.
> Sorry for being a noob, if you can tell me the path to these files I'll
> send them right away.
>
>
> On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine <mbourvin(a)redhat.com>wrote:
>
>> Hi Nauman,
>>
>> Maybe it's a selinux issue?
>> Please try running `setenforce 0` before starting the vm.
>>
>> Also please attach engine.log, vdsm.log, and audit.log
>>
>> ------------------------------
>>
>> *From: *"Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
>> *To: *"users(a)ovirt.org" <Users(a)ovirt.org>
>> *Sent: *Tuesday, December 31, 2013 7:13:01 AM
>> *Subject: *[Users] VM not starting up
>>
>>
>> Hello all,
>>
>> First of all thank you for your help, I've finally managed to get my
>> Cluster configured properly but now that I create VMs I'm facing another
>> problem. Whenever I start my VM I get this error.
>>
>> "VM TestVm is down. Exit message: Child quit during startup handshake:
>> Input/output error."
>>
>> I've googled around but haven't found any satisfactory solution. If
>> anyone can help out it would be great.
>>
>> Regards
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
>
>
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
11:58 a.m.
New subject: [Users] VM not starting up
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to
launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate
with (..." and either find the matching "return vmCreate with"
or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.
Gadi Ickowicz
----- Original Message -----
From: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
To: "Meital Bourvine" <mbourvin(a)redhat.com>
Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
Sent: Tuesday, December 31, 2013 11:47:12 AM
Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5
hours ahead of Node clock. I've corrected that but still the same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin(a)redhat.com > wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log)
but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin(a)redhat.com > wrote:
Engine log can be found on the engine (while vdsm.log is on the host).
The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from
it.
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 8:42:43 AM
Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is
showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being
a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin(a)redhat.com > wrote:
Hi Nauman,
Maybe it's a selinux issue?
Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 7:13:01 AM
Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster
configured properly but now that I create VMs I'm facing another problem. Whenever I
start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output
error."
I've googled around but haven't found any satisfactory solution. If anyone can
help out it would be great.
Regards
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:24 p.m.
New subject: [Users] VM not starting up
I've attached the portions with vmcreate. I found 5 instances of pairs of
call vmcreate and return vmcreate. I've separated them with lines. See if
that helps.
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz <gickowic(a)redhat.com> wrote:
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain
the attempt to launch the vm itself - it should start with vmCreate. Try to
find "::call vmCreate with (..." and either find the matching "return
vmCreate with"
or an maybe there is an ERROR or Traceback in the vdsm log following the
vmCreate call.
Gadi Ickowicz
----- Original Message -----
From: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
To: "Meital Bourvine" <mbourvin(a)redhat.com>
Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
Sent: Tuesday, December 31, 2013 11:47:12 AM
Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine
clock was 5 hours ahead of Node clock. I've corrected that but still the
same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin(a)redhat.com >
wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log)
but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin(a)redhat.com >
wrote:
Engine log can be found on the engine (while vdsm.log is on the host).
The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too
much from it.
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 8:42:43 AM
Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and
storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log.
Sorry for being a noob, if you can tell me the path to these files I'll
send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin(a)redhat.com >
wrote:
Hi Nauman,
Maybe it's a selinux issue?
Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 7:13:01 AM
Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my
Cluster configured properly but now that I create VMs I'm facing another
problem. Whenever I start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake:
Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone
can help out it would be great.
Regards
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
12:51 p.m.
New subject: [Users] VM not starting up
------YILTOSUYZF0PF63RTFGGUTVFMQPO7D
Content-Transfer-Encoding: 8bit
Content-Type: text/plain;
charset=UTF-8
Nauman Abbas <nauman.abbas(a)seecs.edu.pk> wrote:
I've attached the portions with vmcreate. I found 5 instances of
pairs
of
call vmcreate and return vmcreate. I've separated them with lines. See
if
that helps.
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz <gickowic(a)redhat.com>
wrote:
> Hi,
>
> Maybe you can send just the relevant part of the vdsm logs that
contain
> the attempt to launch the vm itself - it should start with vmCreate.
Try to
> find "::call vmCreate with (..." and either find the matching "return
> vmCreate with"
> or an maybe there is an ERROR or Traceback in the vdsm log following
the
> vmCreate call.
>
> Gadi Ickowicz
>
> ----- Original Message -----
> From: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
> To: "Meital Bourvine" <mbourvin(a)redhat.com>
> Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
> Sent: Tuesday, December 31, 2013 11:47:12 AM
> Subject: Re: [Users] VM not starting up
>
> Vdsm is running fine. Also checked the clocks. You were right, the
Engine
> clock was 5 hours ahead of Node clock. I've corrected that but still
the
> same issue.
>
>
> On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine <
mbourvin(a)redhat.com >
> wrote:
>
>
>
> Are you sure that vdsm is running?
>
> The error happened at 2013-12-31 11:32:56,999 (engine.log)
> but the last line in vdsm.log is from 2013-12-31 07:20:50,807
>
> Also make sure that your clocked are synced.
>
>
>
>
>
>
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 9:39:09 AM
>
> Subject: Re: [Users] VM not starting up
>
> Sending files one by one. Vdsm.log
>
>
> On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine <
mbourvin(a)redhat.com >
> wrote:
>
>
>
> Engine log can be found on the engine (while vdsm.log is on the
host).
> The full path is - /var/log/ovirt-engine/engine.log
>
> audit.log - /var/log/audit/audit.log
>
> About the vdsm log - I don't see any error there, I think that you
cut too
> much from it.
>
>
>
>
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 8:42:43 AM
> Subject: Re: [Users] VM not starting up
>
>
> Hello Meital
>
> SELinux is off. The cluster doesn't work if SELinux is on, my hosts
and
> storage is showing up as okay but VM is not starting up.
>
> I've managed to get vdsm.log but cannot find engine.log and
audit.log.
> Sorry for being a noob, if you can tell me the path to these files
I'll
> send them right away.
>
>
> On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine <
mbourvin(a)redhat.com >
> wrote:
>
>
>
> Hi Nauman,
>
> Maybe it's a selinux issue?
> Please try running `setenforce 0` before starting the vm.
>
> Also please attach engine.log, vdsm.log, and audit.log
>
>
>
>
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 7:13:01 AM
> Subject: [Users] VM not starting up
>
>
> Hello all,
>
> First of all thank you for your help, I've finally managed to get my
> Cluster configured properly but now that I create VMs I'm facing
another
> problem. Whenever I start my VM I get this error.
>
> " VM TestVm is down. Exit message: Child quit during startup
handshake:
> Input/output error."
>
> I've googled around but haven't found any satisfactory solution. If
anyone
> can help out it would be great.
>
> Regards
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
Paste your logs to fpaste.org or similar and put the url in the mail. Your snippets don‘t
contain any errors that i can see.
--
Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
------YILTOSUYZF0PF63RTFGGUTVFMQPO7D
Content-Type: text/html;
charset=utf-8
Content-Transfer-Encoding: 8bit
<html><head></head><body><div
class="gmail_quote">Nauman Abbas &lt;nauman.abbas(a)seecs.edu.pk&gt;
wrote:<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex;
border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<div dir="ltr">I've attached the portions with vmcreate. I found 5
instances of pairs of call vmcreate and return vmcreate. I've separated them with
lines. See if that helps.</div><div class="gmail_extra"><br
/><br /><div class="gmail_quote">
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz <span
dir="ltr"><<a href="mailto:gickowic@redhat.com"
target="_blank">gickowic(a)redhat.com</a>&gt;</span>
wrote:<br /><blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi,<br />
<br />
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to
launch the vm itself - it should start with vmCreate. Try to find "::call
vmCreate with (..." and either find the matching "return vmCreate
with"<br />
or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate
call.<br />
<span class="HOEnZb"><font color="#888888"><br />
Gadi Ickowicz<br />
</font></span><div class="im HOEnZb"><br />
----- Original Message -----<br />
From: "Nauman Abbas" <<a
href="mailto:nauman.abbas@seecs.edu.pk">nauman.abbas@seecs.edu.pk</a>><br
/>
To: "Meital Bourvine" <<a
href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a>><br
/>
Cc: "<a
href="mailto:users@ovirt.org">users@ovirt.org</a>"
<<a
href="mailto:Users@ovirt.org">Users@ovirt.org</a>><br />
</div><div class="im HOEnZb">Sent: Tuesday, December 31, 2013
11:47:12 AM<br />
Subject: Re: [Users] VM not starting up<br />
<br />
</div><div class="im HOEnZb">Vdsm is running fine. Also checked the
clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've
corrected that but still the same issue.<br />
<br />
<br />
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < <a
href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a> >
wrote:<br />
<br />
<br />
<br />
Are you sure that vdsm is running?<br />
<br />
The error happened at 2013-12-31 11:32:56,999 (engine.log)<br />
but the last line in vdsm.log is from 2013-12-31 07:20:50,807<br />
<br />
Also make sure that your clocked are synced.<br />
<br />
<br />
<br />
<br />
<br />
<br />
</div><div class="im HOEnZb">From: "Nauman Abbas"
< <a
href="mailto:nauman.abbas@seecs.edu.pk">nauman.abbas@seecs.edu.pk</a>
><br />
To: "Meital Bourvine" < <a
href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a>
><br />
Cc: " <a href="mailto:users@ovirt.org">users@ovirt.org</a>
" < <a
href="mailto:Users@ovirt.org">Users@ovirt.org</a> ><br />
Sent: Tuesday, December 31, 2013 9:39:09 AM<br />
<br />
Subject: Re: [Users] VM not starting up<br />
<br />
Sending files one by one. Vdsm.log<br />
<br />
<br />
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < <a
href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a> >
wrote:<br />
<br />
<br />
<br />
Engine log can be found on the engine (while vdsm.log is on the host).<br />
The full path is - /var/log/ovirt-engine/engine.log<br />
<br />
audit.log - /var/log/audit/audit.log<br />
<br />
About the vdsm log - I don't see any error there, I think that you cut too much
from it.<br />
<br />
<br />
<br />
<br />
</div><div class="im HOEnZb">From: "Nauman Abbas"
< <a
href="mailto:nauman.abbas@seecs.edu.pk">nauman.abbas@seecs.edu.pk</a>
><br />
To: "Meital Bourvine" < <a
href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a>
><br />
Cc: " <a href="mailto:users@ovirt.org">users@ovirt.org</a>
" < <a
href="mailto:Users@ovirt.org">Users@ovirt.org</a> ><br />
Sent: Tuesday, December 31, 2013 8:42:43 AM<br />
Subject: Re: [Users] VM not starting up<br />
<br />
<br />
Hello Meital<br />
<br />
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is
showing up as okay but VM is not starting up.<br />
<br />
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for
being a noob, if you can tell me the path to these files I'll send them right
away.<br />
<br />
<br />
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < <a
href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a> >
wrote:<br />
<br />
<br />
<br />
Hi Nauman,<br />
<br />
Maybe it's a selinux issue?<br />
Please try running `setenforce 0` before starting the vm.<br />
<br />
Also please attach engine.log, vdsm.log, and audit.log<br />
<br />
<br />
<br />
<br />
</div><div class="HOEnZb"><div class="h5">From:
"Nauman Abbas" < <a
href="mailto:nauman.abbas@seecs.edu.pk">nauman.abbas@seecs.edu.pk</a>
><br />
To: " <a href="mailto:users@ovirt.org">users@ovirt.org</a>
" < <a
href="mailto:Users@ovirt.org">Users@ovirt.org</a> ><br />
Sent: Tuesday, December 31, 2013 7:13:01 AM<br />
Subject: [Users] VM not starting up<br />
<br />
<br />
Hello all,<br />
<br />
First of all thank you for your help, I've finally managed to get my Cluster
configured properly but now that I create VMs I'm facing another problem. Whenever
I start my VM I get this error.<br />
<br />
" VM TestVm is down. Exit message: Child quit during startup handshake:
Input/output error."<br />
<br />
I've googled around but haven't found any satisfactory solution. If anyone
can help out it would be great.<br />
<br />
Regards<br />
<br />
Nauman Abbas<br />
Assistant System Administrator (LMS),<br />
Room No. A-207, SEECS,<br />
National University of Sciences & Technology,<br />
<a href="tel:%2B%2092%20321%205359946" value="+923215359946">+
92 321 5359946</a><br />
<br />
_______________________________________________<br />
Users mailing list<br />
<a href="mailto:Users@ovirt.org">Users@ovirt.org</a><br />
<a href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
/>
<br />
<br />
<br />
<br />
--<br />
<br />
Nauman Abbas<br />
Assistant System Administrator (LMS),<br />
Room No. A-207, SEECS,<br />
National University of Sciences & Technology,<br />
<a href="tel:%2B%2092%20321%205359946" value="+923215359946">+
92 321 5359946</a><br />
<br />
<br />
<br />
<br />
--<br />
<br />
Nauman Abbas<br />
Assistant System Administrator (LMS),<br />
Room No. A-207, SEECS,<br />
National University of Sciences & Technology,<br />
<a href="tel:%2B%2092%20321%205359946" value="+923215359946">+
92 321 5359946</a><br />
<br />
<br />
<br />
<br />
--<br />
<br />
Nauman Abbas<br />
Assistant System Administrator (LMS),<br />
Room No. A-207, SEECS,<br />
National University of Sciences & Technology,<br />
<a href="tel:%2B%2092%20321%205359946" value="+923215359946">+
92 321 5359946</a><br />
<br />
_______________________________________________<br />
Users mailing list<br />
<a href="mailto:Users@ovirt.org">Users@ovirt.org</a><br />
<a href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
/>
</div></div></blockquote></div><br /><br
clear="all" /><div><br /></div>-- <br /><div
dir="ltr"><div><br /></div><font
color="#3d85c6">Nauman Abbas<br
/></font><div><div><font
color="#3d85c6"><font>Assistant System
Administrator</font><span
style="font-size:small"> (LMS),</span></font></div>
<div><font color="#3d85c6">Room No. A-207,
SEECS,</font></div><div><font color="#3d85c6">National
University of Sciences & Technology,</font></div><div><a
value="+923455146301"><font color="#3d85c6">+ 92 321
5359946</font></a></div>
</div></div>
</div>
</blockquote></div><br clear="all">Paste your logs to <a
href="http://fpaste.org">fpaste.org</a> or similar and put the url in
the mail. Your snippets don‘t contain any errors that i can see.<br>
<br>
-- <br>
Sent from my Android tablet with K-9 Mail. Please excuse my
brevity.</body></html>
------YILTOSUYZF0PF63RTFGGUTVFMQPO7D--
1:36 p.m.
New subject: [Users] VM not starting up
It would be helpful to get a bit more information from the logs - after the vmCreate there
are several other things that occur before the vm process is actually launched
(prepareImage and following that the actual vm's should be visible in the log). Try to
search for an error in the vdsm log, and if you cannot find one attach logs containing the
vmCreate and the other operations I mentioned.
Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the
error comes from libvirt it may not contain the uppercase ERROR and be logged as
libvirtError or something similar.
you should also have the qemu log for the vm you are trying to run. usually under
/var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will give more information
regarding the failure
Gadi Ickowicz
----- Original Message -----
From: "Joop" <jvdwege(a)xs4all.nl>
To: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
Sent: Tuesday, December 31, 2013 12:51:10 PM
Subject: Re: [Users] VM not starting up
Nauman Abbas <nauman.abbas(a)seecs.edu.pk> wrote:
I've attached the portions with vmcreate. I found 5 instances of pairs of call
vmcreate and return vmcreate. I've separated them with lines. See if that helps.
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic(a)redhat.com > wrote:
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to
launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate
with (..." and either find the matching "return vmCreate with"
or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.
Gadi Ickowicz
----- Original Message -----
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 11:47:12 AM
Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5
hours ahead of Node clock. I've corrected that but still the same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin(a)redhat.com > wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log)
but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin(a)redhat.com > wrote:
Engine log can be found on the engine (while vdsm.log is on the host).
The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from
it.
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 8:42:43 AM
Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is
showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being
a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin(a)redhat.com > wrote:
Hi Nauman,
Maybe it's a selinux issue?
Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 7:13:01 AM
Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster
configured properly but now that I create VMs I'm facing another problem. Whenever I
start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output
error."
I've googled around but haven't found any satisfactory solution. If anyone can
help out it would be great.
Regards
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
Paste your logs to fpaste.org or similar and put the url in the mail. Your snippets don‘t
contain any errors that i can see.
--
Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
7:23 a.m.
New subject: [Users] VM not starting up
I'm going through the log (which is quite big) and I've found out this part
which is like 2 seconds after the vmcreate part. Have a look maybe this is
what you're looking for. It contains the ERROR and Traceback in it.
http://ur1.ca/gakhc
On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic(a)redhat.com> wrote:
It would be helpful to get a bit more information from the logs -
after
the vmCreate there are several other things that occur before the vm
process is actually launched (prepareImage and following that the actual
vm's should be visible in the log). Try to search for an error in the vdsm
log, and if you cannot find one attach logs containing the vmCreate and the
other operations I mentioned.
Errors in the vdsm log are usually logged in lines containing ERROR, but
sometimes if the error comes from libvirt it may not contain the uppercase
ERROR and be logged as libvirtError or something similar.
you should also have the qemu log for the vm you are trying to run.
usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will
give more information regarding the failure
Gadi Ickowicz
----- Original Message -----
From: "Joop" <jvdwege(a)xs4all.nl>
To: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
Sent: Tuesday, December 31, 2013 12:51:10 PM
Subject: Re: [Users] VM not starting up
Nauman Abbas <nauman.abbas(a)seecs.edu.pk> wrote:
I've attached the portions with vmcreate. I found 5 instances of pairs of
call vmcreate and return vmcreate. I've separated them with lines. See if
that helps.
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic(a)redhat.com >
wrote:
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain
the attempt to launch the vm itself - it should start with vmCreate. Try to
find "::call vmCreate with (..." and either find the matching "return
vmCreate with"
or an maybe there is an ERROR or Traceback in the vdsm log following the
vmCreate call.
Gadi Ickowicz
----- Original Message -----
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 11:47:12 AM
Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine
clock was 5 hours ahead of Node clock. I've corrected that but still the
same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin(a)redhat.com >
wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log)
but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin(a)redhat.com >
wrote:
Engine log can be found on the engine (while vdsm.log is on the host).
The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too
much from it.
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 8:42:43 AM
Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and
storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log.
Sorry for being a noob, if you can tell me the path to these files I'll
send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin(a)redhat.com >
wrote:
Hi Nauman,
Maybe it's a selinux issue?
Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 7:13:01 AM
Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my
Cluster configured properly but now that I create VMs I'm facing another
problem. Whenever I start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake:
Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone
can help out it would be great.
Regards
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
Paste your logs to fpaste.org or similar and put the url in the mail.
Your snippets don‘t contain any errors that i can see.
--
Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
7:30 a.m.
New subject: [Users] VM not starting up
Also I believe these lines right before what I pasted with Fpaste link
would be relevant.
Thread-622::DEBUG::2013-12-31
05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown
libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup
handshake: Input/output error
Thread-622::DEBUG::2013-12-31
05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm)
vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released
On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas <nauman.abbas(a)seecs.edu.pk>wrote:
I'm going through the log (which is quite big) and I've found
out this
part which is like 2 seconds after the vmcreate part. Have a look maybe
this is what you're looking for. It contains the ERROR and Traceback in it.
http://ur1.ca/gakhc
On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic(a)redhat.com>wrote:
> It would be helpful to get a bit more information from the logs - after
> the vmCreate there are several other things that occur before the vm
> process is actually launched (prepareImage and following that the actual
> vm's should be visible in the log). Try to search for an error in the vdsm
> log, and if you cannot find one attach logs containing the vmCreate and the
> other operations I mentioned.
>
> Errors in the vdsm log are usually logged in lines containing ERROR, but
> sometimes if the error comes from libvirt it may not contain the uppercase
> ERROR and be logged as libvirtError or something similar.
>
> you should also have the qemu log for the vm you are trying to run.
> usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will
> give more information regarding the failure
>
> Gadi Ickowicz
>
> ----- Original Message -----
> From: "Joop" <jvdwege(a)xs4all.nl>
> To: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
> Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
> Sent: Tuesday, December 31, 2013 12:51:10 PM
> Subject: Re: [Users] VM not starting up
>
> Nauman Abbas <nauman.abbas(a)seecs.edu.pk> wrote:
>
>
> I've attached the portions with vmcreate. I found 5 instances of pairs of
> call vmcreate and return vmcreate. I've separated them with lines. See if
> that helps.
>
>
> On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic(a)redhat.com >
> wrote:
>
>
> Hi,
>
> Maybe you can send just the relevant part of the vdsm logs that contain
> the attempt to launch the vm itself - it should start with vmCreate. Try to
> find "::call vmCreate with (..." and either find the matching "return
> vmCreate with"
> or an maybe there is an ERROR or Traceback in the vdsm log following the
> vmCreate call.
>
> Gadi Ickowicz
>
> ----- Original Message -----
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 11:47:12 AM
> Subject: Re: [Users] VM not starting up
>
> Vdsm is running fine. Also checked the clocks. You were right, the Engine
> clock was 5 hours ahead of Node clock. I've corrected that but still the
> same issue.
>
>
> On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin(a)redhat.com>
wrote:
>
>
>
> Are you sure that vdsm is running?
>
> The error happened at 2013-12-31 11:32:56,999 (engine.log)
> but the last line in vdsm.log is from 2013-12-31 07:20:50,807
>
> Also make sure that your clocked are synced.
>
>
>
>
>
>
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 9:39:09 AM
>
> Subject: Re: [Users] VM not starting up
>
> Sending files one by one. Vdsm.log
>
>
> On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin(a)redhat.com>
wrote:
>
>
>
> Engine log can be found on the engine (while vdsm.log is on the host).
> The full path is - /var/log/ovirt-engine/engine.log
>
> audit.log - /var/log/audit/audit.log
>
> About the vdsm log - I don't see any error there, I think that you cut
> too much from it.
>
>
>
>
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 8:42:43 AM
> Subject: Re: [Users] VM not starting up
>
>
> Hello Meital
>
> SELinux is off. The cluster doesn't work if SELinux is on, my hosts and
> storage is showing up as okay but VM is not starting up.
>
> I've managed to get vdsm.log but cannot find engine.log and audit.log.
> Sorry for being a noob, if you can tell me the path to these files I'll
> send them right away.
>
>
> On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin(a)redhat.com>
wrote:
>
>
>
> Hi Nauman,
>
> Maybe it's a selinux issue?
> Please try running `setenforce 0` before starting the vm.
>
> Also please attach engine.log, vdsm.log, and audit.log
>
>
>
>
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 7:13:01 AM
> Subject: [Users] VM not starting up
>
>
> Hello all,
>
> First of all thank you for your help, I've finally managed to get my
> Cluster configured properly but now that I create VMs I'm facing another
> problem. Whenever I start my VM I get this error.
>
> " VM TestVm is down. Exit message: Child quit during startup handshake:
> Input/output error."
>
> I've googled around but haven't found any satisfactory solution. If
> anyone can help out it would be great.
>
> Regards
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
> Paste your logs to fpaste.org or similar and put the url in the mail.
> Your snippets don‘t contain any errors that i can see.
>
> --
> Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
8:56 a.m.
New subject: [Users] VM not starting up
the lines you added that are right before the Fpaste link are the actual lines messages
from libvirt that the vm dies. This message from libvirt is then shown later as the ERROR
in vdsm in the Fpaste link.
The log should contain, very close to the lines you paste, but a bit before, an xml. it
should look something like what I am pasting below. Also, the line right before the xml
should contain a prepareVolumePath entry:
Thread-50::DEBUG::2013-12-25 14:30:45,282::vm::3031::vm.Vm::(_run)
vmId=`fdfaec39-b981-4bd7-9852-6d5ac6ce2b37`::<?xml version="1.0"
encoding="utf-8"?>
...<the xml continues a bit with all the vm properties>
also - what versions of vdsm, libvirt, sanlock and qemu are you using?
Gadi Ickowicz
----- Original Message -----
From: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
To: "Gadi Ickowicz" <gickowic(a)redhat.com>
Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
Sent: Wednesday, January 1, 2014 7:30:24 AM
Subject: Re: [Users] VM not starting up
Also I believe these lines right before what I pasted with Fpaste link
would be relevant.
Thread-622::DEBUG::2013-12-31
05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown
libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup
handshake: Input/output error
Thread-622::DEBUG::2013-12-31
05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm)
vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released
On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas <nauman.abbas(a)seecs.edu.pk>wrote:
I'm going through the log (which is quite big) and I've found
out this
part which is like 2 seconds after the vmcreate part. Have a look maybe
this is what you're looking for. It contains the ERROR and Traceback in it.
http://ur1.ca/gakhc
On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic(a)redhat.com>wrote:
> It would be helpful to get a bit more information from the logs - after
> the vmCreate there are several other things that occur before the vm
> process is actually launched (prepareImage and following that the actual
> vm's should be visible in the log). Try to search for an error in the vdsm
> log, and if you cannot find one attach logs containing the vmCreate and the
> other operations I mentioned.
>
> Errors in the vdsm log are usually logged in lines containing ERROR, but
> sometimes if the error comes from libvirt it may not contain the uppercase
> ERROR and be logged as libvirtError or something similar.
>
> you should also have the qemu log for the vm you are trying to run.
> usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will
> give more information regarding the failure
>
> Gadi Ickowicz
>
> ----- Original Message -----
> From: "Joop" <jvdwege(a)xs4all.nl>
> To: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
> Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
> Sent: Tuesday, December 31, 2013 12:51:10 PM
> Subject: Re: [Users] VM not starting up
>
> Nauman Abbas <nauman.abbas(a)seecs.edu.pk> wrote:
>
>
> I've attached the portions with vmcreate. I found 5 instances of pairs of
> call vmcreate and return vmcreate. I've separated them with lines. See if
> that helps.
>
>
> On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic(a)redhat.com >
> wrote:
>
>
> Hi,
>
> Maybe you can send just the relevant part of the vdsm logs that contain
> the attempt to launch the vm itself - it should start with vmCreate. Try to
> find "::call vmCreate with (..." and either find the matching "return
> vmCreate with"
> or an maybe there is an ERROR or Traceback in the vdsm log following the
> vmCreate call.
>
> Gadi Ickowicz
>
> ----- Original Message -----
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 11:47:12 AM
> Subject: Re: [Users] VM not starting up
>
> Vdsm is running fine. Also checked the clocks. You were right, the Engine
> clock was 5 hours ahead of Node clock. I've corrected that but still the
> same issue.
>
>
> On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin(a)redhat.com>
wrote:
>
>
>
> Are you sure that vdsm is running?
>
> The error happened at 2013-12-31 11:32:56,999 (engine.log)
> but the last line in vdsm.log is from 2013-12-31 07:20:50,807
>
> Also make sure that your clocked are synced.
>
>
>
>
>
>
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 9:39:09 AM
>
> Subject: Re: [Users] VM not starting up
>
> Sending files one by one. Vdsm.log
>
>
> On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin(a)redhat.com>
wrote:
>
>
>
> Engine log can be found on the engine (while vdsm.log is on the host).
> The full path is - /var/log/ovirt-engine/engine.log
>
> audit.log - /var/log/audit/audit.log
>
> About the vdsm log - I don't see any error there, I think that you cut
> too much from it.
>
>
>
>
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 8:42:43 AM
> Subject: Re: [Users] VM not starting up
>
>
> Hello Meital
>
> SELinux is off. The cluster doesn't work if SELinux is on, my hosts and
> storage is showing up as okay but VM is not starting up.
>
> I've managed to get vdsm.log but cannot find engine.log and audit.log.
> Sorry for being a noob, if you can tell me the path to these files I'll
> send them right away.
>
>
> On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin(a)redhat.com>
wrote:
>
>
>
> Hi Nauman,
>
> Maybe it's a selinux issue?
> Please try running `setenforce 0` before starting the vm.
>
> Also please attach engine.log, vdsm.log, and audit.log
>
>
>
>
> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> To: " users(a)ovirt.org " < Users(a)ovirt.org >
> Sent: Tuesday, December 31, 2013 7:13:01 AM
> Subject: [Users] VM not starting up
>
>
> Hello all,
>
> First of all thank you for your help, I've finally managed to get my
> Cluster configured properly but now that I create VMs I'm facing another
> problem. Whenever I start my VM I get this error.
>
> " VM TestVm is down. Exit message: Child quit during startup handshake:
> Input/output error."
>
> I've googled around but haven't found any satisfactory solution. If
> anyone can help out it would be great.
>
> Regards
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
> Paste your logs to fpaste.org or similar and put the url in the mail.
> Your snippets don‘t contain any errors that i can see.
>
> --
> Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
9:12 a.m.
New subject: [Users] VM not starting up
Found it.
http://ur1.ca/gakse
Also here's the versions
vdsm 4.13
sanlock 2.8
libvirt 1.1.3.1
qemu 1.6.1
On Wed, Jan 1, 2014 at 11:56 AM, Gadi Ickowicz <gickowic(a)redhat.com> wrote:
the lines you added that are right before the Fpaste link are the
actual
lines messages from libvirt that the vm dies. This message from libvirt is
then shown later as the ERROR in vdsm in the Fpaste link.
The log should contain, very close to the lines you paste, but a bit
before, an xml. it should look something like what I am pasting below.
Also, the line right before the xml should contain a prepareVolumePath
entry:
Thread-50::DEBUG::2013-12-25 14:30:45,282::vm::3031::vm.Vm::(_run)
vmId=`fdfaec39-b981-4bd7-9852-6d5ac6ce2b37`::<?xml version="1.0"
encoding="utf-8"?>
...<the xml continues a bit with all the vm properties>
also - what versions of vdsm, libvirt, sanlock and qemu are you using?
Gadi Ickowicz
----- Original Message -----
From: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
To: "Gadi Ickowicz" <gickowic(a)redhat.com>
Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
Sent: Wednesday, January 1, 2014 7:30:24 AM
Subject: Re: [Users] VM not starting up
Also I believe these lines right before what I pasted with Fpaste link
would be relevant.
Thread-622::DEBUG::2013-12-31
05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown
libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup
handshake: Input/output error
Thread-622::DEBUG::2013-12-31
05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm)
vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released
On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas <nauman.abbas(a)seecs.edu.pk
>wrote:
> I'm going through the log (which is quite big) and I've found out this
> part which is like 2 seconds after the vmcreate part. Have a look maybe
> this is what you're looking for. It contains the ERROR and Traceback in
it.
>
>
> http://ur1.ca/gakhc
>
>
> On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic(a)redhat.com
>wrote:
>
>> It would be helpful to get a bit more information from the logs - after
>> the vmCreate there are several other things that occur before the vm
>> process is actually launched (prepareImage and following that the actual
>> vm's should be visible in the log). Try to search for an error in the
vdsm
>> log, and if you cannot find one attach logs containing the vmCreate and
the
>> other operations I mentioned.
>>
>> Errors in the vdsm log are usually logged in lines containing ERROR, but
>> sometimes if the error comes from libvirt it may not contain the
uppercase
>> ERROR and be logged as libvirtError or something similar.
>>
>> you should also have the qemu log for the vm you are trying to run.
>> usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that
will
>> give more information regarding the failure
>>
>> Gadi Ickowicz
>>
>> ----- Original Message -----
>> From: "Joop" <jvdwege(a)xs4all.nl>
>> To: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
>> Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
>> Sent: Tuesday, December 31, 2013 12:51:10 PM
>> Subject: Re: [Users] VM not starting up
>>
>> Nauman Abbas <nauman.abbas(a)seecs.edu.pk> wrote:
>>
>>
>> I've attached the portions with vmcreate. I found 5 instances of pairs
of
>> call vmcreate and return vmcreate. I've separated them with lines. See
if
>> that helps.
>>
>>
>> On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic(a)redhat.com >
>> wrote:
>>
>>
>> Hi,
>>
>> Maybe you can send just the relevant part of the vdsm logs that contain
>> the attempt to launch the vm itself - it should start with vmCreate.
Try to
>> find "::call vmCreate with (..." and either find the matching
"return
>> vmCreate with"
>> or an maybe there is an ERROR or Traceback in the vdsm log following the
>> vmCreate call.
>>
>> Gadi Ickowicz
>>
>> ----- Original Message -----
>> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
>> To: "Meital Bourvine" < mbourvin(a)redhat.com >
>> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
>> Sent: Tuesday, December 31, 2013 11:47:12 AM
>> Subject: Re: [Users] VM not starting up
>>
>> Vdsm is running fine. Also checked the clocks. You were right, the
Engine
>> clock was 5 hours ahead of Node clock. I've corrected that but still the
>> same issue.
>>
>>
>> On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin(a)redhat.com>
wrote:
>>
>>
>>
>> Are you sure that vdsm is running?
>>
>> The error happened at 2013-12-31 11:32:56,999 (engine.log)
>> but the last line in vdsm.log is from 2013-12-31 07:20:50,807
>>
>> Also make sure that your clocked are synced.
>>
>>
>>
>>
>>
>>
>> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
>> To: "Meital Bourvine" < mbourvin(a)redhat.com >
>> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
>> Sent: Tuesday, December 31, 2013 9:39:09 AM
>>
>> Subject: Re: [Users] VM not starting up
>>
>> Sending files one by one. Vdsm.log
>>
>>
>> On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin(a)redhat.com>
wrote:
>>
>>
>>
>> Engine log can be found on the engine (while vdsm.log is on the host).
>> The full path is - /var/log/ovirt-engine/engine.log
>>
>> audit.log - /var/log/audit/audit.log
>>
>> About the vdsm log - I don't see any error there, I think that you cut
>> too much from it.
>>
>>
>>
>>
>> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
>> To: "Meital Bourvine" < mbourvin(a)redhat.com >
>> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
>> Sent: Tuesday, December 31, 2013 8:42:43 AM
>> Subject: Re: [Users] VM not starting up
>>
>>
>> Hello Meital
>>
>> SELinux is off. The cluster doesn't work if SELinux is on, my hosts and
>> storage is showing up as okay but VM is not starting up.
>>
>> I've managed to get vdsm.log but cannot find engine.log and audit.log.
>> Sorry for being a noob, if you can tell me the path to these files I'll
>> send them right away.
>>
>>
>> On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin(a)redhat.com>
wrote:
>>
>>
>>
>> Hi Nauman,
>>
>> Maybe it's a selinux issue?
>> Please try running `setenforce 0` before starting the vm.
>>
>> Also please attach engine.log, vdsm.log, and audit.log
>>
>>
>>
>>
>> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
>> To: " users(a)ovirt.org " < Users(a)ovirt.org >
>> Sent: Tuesday, December 31, 2013 7:13:01 AM
>> Subject: [Users] VM not starting up
>>
>>
>> Hello all,
>>
>> First of all thank you for your help, I've finally managed to get my
>> Cluster configured properly but now that I create VMs I'm facing another
>> problem. Whenever I start my VM I get this error.
>>
>> " VM TestVm is down. Exit message: Child quit during startup handshake:
>> Input/output error."
>>
>> I've googled around but haven't found any satisfactory solution. If
>> anyone can help out it would be great.
>>
>> Regards
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>>
>> --
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>>
>>
>>
>> --
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>>
>>
>>
>> --
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>> --
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>> Paste your logs to fpaste.org or similar and put the url in the mail.
>> Your snippets don‘t contain any errors that i can see.
>>
>> --
>> Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
9:25 a.m.
New subject: [Users] VM not starting up
And here's the prepareVolumePath entry
Thread-622::DEBUG::2013-12-31
05:06:02,576::task::974::TaskManager.Task::(_decref)
Task=`8ae0743d-8e3e-4516-9d67-7713fa546759`::ref 0 aborting False
Thread-622::INFO::2013-12-31
05:06:02,576::clientIF::350::vds::(prepareVolumePath) prepared volume path:
/rhev/data-center/mnt/_data_images_rhev/66e0b27c-dcbb-4b6e-9a58-8213e8380c65/images/7c063b30-634a-483b-82aa-7f19d2ae46cd/b0839e46-9f79-49b2-ae34-f7cafb626c75
Thread-622::DEBUG::2013-12-31 05:06:02,589::utils::489::root::(execCmd)
'/usr/libexec/vdsm/hooks/before_vm_start/50_vhostmd' (cwd None)
Thread-622::DEBUG::2013-12-31 05:06:02,642::utils::509::root::(execCmd)
SUCCESS: <err> = ''; <rc> = 0
Thread-622::INFO::2013-12-31 05:06:02,642::hooks::88::root::(_runHooksDir)
Thread-622::DEBUG::2013-12-31 05:06:02,643::vm::2925::vm.Vm::(_run)
vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::<?xml version="1.0"...
On Wed, Jan 1, 2014 at 12:12 PM, Nauman Abbas <nauman.abbas(a)seecs.edu.pk>wrote:
Found it.
http://ur1.ca/gakse
Also here's the versions
vdsm 4.13
sanlock 2.8
libvirt 1.1.3.1
qemu 1.6.1
On Wed, Jan 1, 2014 at 11:56 AM, Gadi Ickowicz <gickowic(a)redhat.com>wrote:
> the lines you added that are right before the Fpaste link are the actual
> lines messages from libvirt that the vm dies. This message from libvirt is
> then shown later as the ERROR in vdsm in the Fpaste link.
>
> The log should contain, very close to the lines you paste, but a bit
> before, an xml. it should look something like what I am pasting below.
> Also, the line right before the xml should contain a prepareVolumePath
> entry:
> Thread-50::DEBUG::2013-12-25 14:30:45,282::vm::3031::vm.Vm::(_run)
> vmId=`fdfaec39-b981-4bd7-9852-6d5ac6ce2b37`::<?xml version="1.0"
> encoding="utf-8"?>
> ...<the xml continues a bit with all the vm properties>
>
> also - what versions of vdsm, libvirt, sanlock and qemu are you using?
>
> Gadi Ickowicz
>
> ----- Original Message -----
> From: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
> To: "Gadi Ickowicz" <gickowic(a)redhat.com>
> Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
> Sent: Wednesday, January 1, 2014 7:30:24 AM
> Subject: Re: [Users] VM not starting up
>
> Also I believe these lines right before what I pasted with Fpaste link
> would be relevant.
>
> Thread-622::DEBUG::2013-12-31
> 05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown
> libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during
> startup
> handshake: Input/output error
> Thread-622::DEBUG::2013-12-31
> 05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm)
> vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released
>
>
> On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas <nauman.abbas(a)seecs.edu.pk
> >wrote:
>
> > I'm going through the log (which is quite big) and I've found out this
> > part which is like 2 seconds after the vmcreate part. Have a look maybe
> > this is what you're looking for. It contains the ERROR and Traceback in
> it.
> >
> >
> > http://ur1.ca/gakhc
> >
> >
> > On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic(a)redhat.com
> >wrote:
> >
> >> It would be helpful to get a bit more information from the logs - after
> >> the vmCreate there are several other things that occur before the vm
> >> process is actually launched (prepareImage and following that the
> actual
> >> vm's should be visible in the log). Try to search for an error in the
> vdsm
> >> log, and if you cannot find one attach logs containing the vmCreate
> and the
> >> other operations I mentioned.
> >>
> >> Errors in the vdsm log are usually logged in lines containing ERROR,
> but
> >> sometimes if the error comes from libvirt it may not contain the
> uppercase
> >> ERROR and be logged as libvirtError or something similar.
> >>
> >> you should also have the qemu log for the vm you are trying to run.
> >> usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that
> will
> >> give more information regarding the failure
> >>
> >> Gadi Ickowicz
> >>
> >> ----- Original Message -----
> >> From: "Joop" <jvdwege(a)xs4all.nl>
> >> To: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
> >> Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
> >> Sent: Tuesday, December 31, 2013 12:51:10 PM
> >> Subject: Re: [Users] VM not starting up
> >>
> >> Nauman Abbas <nauman.abbas(a)seecs.edu.pk> wrote:
> >>
> >>
> >> I've attached the portions with vmcreate. I found 5 instances of pairs
> of
> >> call vmcreate and return vmcreate. I've separated them with lines. See
> if
> >> that helps.
> >>
> >>
> >> On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic(a)redhat.com
>
> >> wrote:
> >>
> >>
> >> Hi,
> >>
> >> Maybe you can send just the relevant part of the vdsm logs that contain
> >> the attempt to launch the vm itself - it should start with vmCreate.
> Try to
> >> find "::call vmCreate with (..." and either find the matching
"return
> >> vmCreate with"
> >> or an maybe there is an ERROR or Traceback in the vdsm log following
> the
> >> vmCreate call.
> >>
> >> Gadi Ickowicz
> >>
> >> ----- Original Message -----
> >> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> >> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> >> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> >> Sent: Tuesday, December 31, 2013 11:47:12 AM
> >> Subject: Re: [Users] VM not starting up
> >>
> >> Vdsm is running fine. Also checked the clocks. You were right, the
> Engine
> >> clock was 5 hours ahead of Node clock. I've corrected that but still
> the
> >> same issue.
> >>
> >>
> >> On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine <
> mbourvin(a)redhat.com> wrote:
> >>
> >>
> >>
> >> Are you sure that vdsm is running?
> >>
> >> The error happened at 2013-12-31 11:32:56,999 (engine.log)
> >> but the last line in vdsm.log is from 2013-12-31 07:20:50,807
> >>
> >> Also make sure that your clocked are synced.
> >>
> >>
> >>
> >>
> >>
> >>
> >> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> >> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> >> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> >> Sent: Tuesday, December 31, 2013 9:39:09 AM
> >>
> >> Subject: Re: [Users] VM not starting up
> >>
> >> Sending files one by one. Vdsm.log
> >>
> >>
> >> On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine <
> mbourvin(a)redhat.com> wrote:
> >>
> >>
> >>
> >> Engine log can be found on the engine (while vdsm.log is on the host).
> >> The full path is - /var/log/ovirt-engine/engine.log
> >>
> >> audit.log - /var/log/audit/audit.log
> >>
> >> About the vdsm log - I don't see any error there, I think that you cut
> >> too much from it.
> >>
> >>
> >>
> >>
> >> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> >> To: "Meital Bourvine" < mbourvin(a)redhat.com >
> >> Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
> >> Sent: Tuesday, December 31, 2013 8:42:43 AM
> >> Subject: Re: [Users] VM not starting up
> >>
> >>
> >> Hello Meital
> >>
> >> SELinux is off. The cluster doesn't work if SELinux is on, my hosts and
> >> storage is showing up as okay but VM is not starting up.
> >>
> >> I've managed to get vdsm.log but cannot find engine.log and audit.log.
> >> Sorry for being a noob, if you can tell me the path to these files I'll
> >> send them right away.
> >>
> >>
> >> On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine <
> mbourvin(a)redhat.com> wrote:
> >>
> >>
> >>
> >> Hi Nauman,
> >>
> >> Maybe it's a selinux issue?
> >> Please try running `setenforce 0` before starting the vm.
> >>
> >> Also please attach engine.log, vdsm.log, and audit.log
> >>
> >>
> >>
> >>
> >> From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
> >> To: " users(a)ovirt.org " < Users(a)ovirt.org >
> >> Sent: Tuesday, December 31, 2013 7:13:01 AM
> >> Subject: [Users] VM not starting up
> >>
> >>
> >> Hello all,
> >>
> >> First of all thank you for your help, I've finally managed to get my
> >> Cluster configured properly but now that I create VMs I'm facing
> another
> >> problem. Whenever I start my VM I get this error.
> >>
> >> " VM TestVm is down. Exit message: Child quit during startup
handshake:
> >> Input/output error."
> >>
> >> I've googled around but haven't found any satisfactory solution. If
> >> anyone can help out it would be great.
> >>
> >> Regards
> >>
> >> Nauman Abbas
> >> Assistant System Administrator (LMS),
> >> Room No. A-207, SEECS,
> >> National University of Sciences & Technology,
> >> + 92 321 5359946
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users(a)ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> >>
> >>
> >>
> >>
> >> --
> >>
> >> Nauman Abbas
> >> Assistant System Administrator (LMS),
> >> Room No. A-207, SEECS,
> >> National University of Sciences & Technology,
> >> + 92 321 5359946
> >>
> >>
> >>
> >>
> >> --
> >>
> >> Nauman Abbas
> >> Assistant System Administrator (LMS),
> >> Room No. A-207, SEECS,
> >> National University of Sciences & Technology,
> >> + 92 321 5359946
> >>
> >>
> >>
> >>
> >> --
> >>
> >> Nauman Abbas
> >> Assistant System Administrator (LMS),
> >> Room No. A-207, SEECS,
> >> National University of Sciences & Technology,
> >> + 92 321 5359946
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users(a)ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> >>
> >>
> >>
> >> --
> >>
> >> Nauman Abbas
> >> Assistant System Administrator (LMS),
> >> Room No. A-207, SEECS,
> >> National University of Sciences & Technology,
> >> + 92 321 5359946
> >>
> >> Paste your logs to fpaste.org or similar and put the url in the mail.
> >> Your snippets don‘t contain any errors that i can see.
> >>
> >> --
> >> Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users(a)ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> >>
> >
> >
> >
> > --
> >
> > Nauman Abbas
> > Assistant System Administrator (LMS),
> > Room No. A-207, SEECS,
> > National University of Sciences & Technology,
> > + 92 321 5359946
> >
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
3980
days inactive
3981
days old
10 comments
4 participants
participants (4)
-
Gadi Ickowicz -
Joop -
Meital Bourvine -
Nauman Abbas