I discovered that the servers I purchased did not come with 10Gbps network cards, like I thought they did. So my storage network has been running on a 1Gbps connection for the past week, since I deployed the servers into the datacenter a little over a week ago. I purchased 10Gbps cards, and put one of my hosts into maintenance mode yesterday, prior to replacing the daughter card. It is now back online running fine on the 10Gbps card. All VMs seem to be working, even when I migrate them onto cha2, which is the host I did maintenance on yesterday morning. The other two hosts are still running on the 1Gbps connection, but I plan to do maintenance on them next week. The oVirt manager shows that all 3 hosts are up, and that all of my volumes - and all of my bricks - are up. However, every time I look at the storage, it appears that the self-heal info for 1 of the volumes is 10 minutes, and the self-heal info for another volume is 50+ minutes. This morning is the first time in the last couple of days that I've paid close attention to the numbers, but I don't see them going down. When I log into each of the hosts, I do see everything is connected in gluster. It is interesting to me, in this particular case, though that gluster on cha3 notices the hostname of 10.1.0.10 to be the IP address, and not the hostname (cha1). The host that I did the maintenance on is cha2. [root@cha3-storage dwhite]# gluster peer statusNumber of Peers: 2Hostname: 10.1.0.10Uuid: 87a4f344-321a-48b9-adfb-e3d2b56b8e7bState: Peer in Cluster (Connected)Hostname: cha2-storage.mgt.barredowlweb.comUuid: 93e12dee-c37d-43aa-a9e9-f4740b9cab14State: Peer in Cluster (Connected) When I run `gluster volume heal data`, I see the following: [root@cha3-storage dwhite]# gluster volume heal data Launching heal operation to perform index self heal on volume data has been unsuccessful: Commit failed on cha2-storage.mgt.barredowlweb.com. Please check log file for details. I get the same results if I run the command on cha2, for any volume: [root@cha2-storage dwhite]# gluster volume heal data Launching heal operation to perform index self heal on volume data has been unsuccessful: Glusterd Syncop Mgmt brick op 'Heal' failed. Please check glustershd log file for details. [root@cha2-storage dwhite]# gluster volume heal vmstore Launching heal operation to perform index self heal on volume vmstore has been unsuccessful: Glusterd Syncop Mgmt brick op 'Heal' failed. Please check glustershd log file for details. I see a lot of stuff like this on cha2 /var/log/glusterfs/glustershd.log: [2021-04-24 11:33:01.319888] I [rpc-clnt.c:1975:rpc_clnt_reconfig] 2-engine-client-0: changing port to 49153 (from 0)[2021-04-24 11:33:01.329463] I [MSGID: 114057] [client-handshake.c:1128:select_server_supported_programs] 2-engine-client-0: Using Program [{Program-name=GlusterFS 4.x v1}, {Num=1298437}, {Version=400}][2021-04-24 11:33:01.330075] W [MSGID: 114043] [client-handshake.c:727:client_setvolume_cbk] 2-engine-client-0: failed to set the volume [{errno=2}, {error=No such file or directory}][2021-04-24 11:33:01.330116] W [MSGID: 114007] [client-handshake.c:752:client_setvolume_cbk] 2-engine-client-0: failed to get from reply dict [{process-uuid}, {errno=22}, {error=Invalid argument}][2021-04-24 11:33:01.330140] E [MSGID: 114044] [client-handshake.c:757:client_setvolume_cbk] 2-engine-client-0: SETVOLUME on remote-host failed [{remote-error=Brick not found}, {errno=2}, {error=No such file or directory}][2021-04-24 11:33:01.330155] I [MSGID: 114051] [client-handshake.c:879:client_setvolume_cbk] 2-engine-client-0: sending CHILD_CONNECTING event [][2021-04-24 11:33:01.640480] I [rpc-clnt.c:1975:rpc_clnt_reconfig] 3-vmstore-client-0: changing port to 49154 (from 0)The message "W [MSGID: 114007] [client-handshake.c:752:client_setvolume_cbk] 3-vmstore-client-0: failed to get from reply dict [{process-uuid}, {errno=22}, {error=Invalid argument}]" repeated 4 times between [2021-04-24 11:32:49.602164] and [2021-04-24 11:33:01.649850][2021-04-24 11:33:01.649867] E [MSGID: 114044] [client-handshake.c:757:client_setvolume_cbk] 3-vmstore-client-0: SETVOLUME on remote-host failed [{remote-error=Brick not found}, {errno=2}, {error=No such file or directory}][2021-04-24 11:33:01.649969] I [MSGID: 114051] [client-handshake.c:879:client_setvolume_cbk] 3-vmstore-client-0: sending CHILD_CONNECTING event [][2021-04-24 11:33:01.650095] I [MSGID: 114018] [client.c:2225:client_rpc_notify] 3-vmstore-client-0: disconnected from client, process will keep trying to connect glusterd until brick's port is available [{conn-name=vmstore-client-0}] How do I further troubleshoot? Sent with ProtonMail Secure Email.