New subject: Re-add a node

Friday, 11 April 2014

James, Please answer the user's list as well as to me so that other 
people can participate as well :)

did you try to press the "confirm host has been rebooted"  (right click)

On 04/11/2014 12:41 PM, James James wrote:
...

 2014-04-11 13:16 GMT+02:00 Dafna Ron <dron(a)redhat.com 
 <mailto:dron@redhat.com>>:

     what is the error message you get when you try to put the host in
     maintenance? 

 I have this message :

 Error while executing action: Cannot switch Host to Maintenance mode.
 Host is Storage Pool Manager and is in Non Responsive state.
 - If power management is configured, engine will try to fence the host 
 automatically.
 - Otherwise, either bring the node back up, or release the SPM resource.
 To do so, verify that the node is really down by right clicking on the 
 host and confirm that the node was shutdown manually.

     are there any running vm's reported?

 No there is no VM running on this host

     Try to press the "confirm host has been rebooted" button and than
     see if you can put the host in maintenance.

     If that fails, select the host, in the general tab you will get
     the re-install link.

 I am running ovirt 3.4.0-1. I down't know where is the re-install link 
 but I can't see it.

     try to re-install, when install fails the host should change
     status to failed installation.

     On 04/11/2014 12:09 PM, James James wrote:

         No, I can't ....

         2014-04-11 12:12 GMT+02:00 Dafna Ron <dron(a)redhat.com
         <mailto:dron@redhat.com> <mailto:dron@redhat.com
         <mailto:dron@redhat.com>>>:

             can you put the host in maintenance?

             On 04/11/2014 10:43 AM, James James wrote:

                 I can't delete the old node because it is in Non
         Responsive
                 state. The remove button is stil blank .

                 In the engine.log I've got this log :
                 2014-04-11 11:40:45,911 ERROR

         [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
                 (DefaultQuartzScheduler_Worker-88) Command
                 GetCapabilitiesVDSCommand(HostName = node1, HostId =
                 36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
                 execution failed. Exception: VDSNetworkException:

         sun.security.provider.certpath.SunCertPathBuilderException:
                 unable to find valid certification path to requested
         target
                 2014-04-11 11:40:48,943 ERROR

         [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand]
                 (DefaultQuartzScheduler_Worker-12) Command
                 GetCapabilitiesVDSCommand(HostName = node1, HostId =
                 36fb6df3-c2c2-4133-86ac-fe50b99ee2e3, vds=Host[node1])
                 execution failed. Exception: VDSNetworkException:

         sun.security.provider.certpath.SunCertPathBuilderException:
                 unable to find valid certification path to requested
         target

                 2014-04-11 11:06 GMT+02:00 Alon Bar-Lev
         <alonbl(a)redhat.com <mailto:alonbl@redhat.com>
                 <mailto:alonbl@redhat.com <mailto:alonbl@redhat.com>>
         <mailto:alonbl@redhat.com <mailto:alonbl@redhat.com>

                 <mailto:alonbl@redhat.com
<mailto:alonbl@redhat.com>>>>:

                     ----- Original Message -----
                     > From: "James James" <jreg2k(a)gmail.com
         <mailto:jreg2k@gmail.com>
                 <mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>>
         <mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>
                 <mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>>>>
                     > To: dron(a)redhat.com <mailto:dron@redhat.com>
         <mailto:dron@redhat.com <mailto:dron@redhat.com>>
                 <mailto:dron@redhat.com <mailto:dron@redhat.com>
         <mailto:dron@redhat.com <mailto:dron@redhat.com>>>
                     > Cc: "users" <users(a)ovirt.org
         <mailto:users@ovirt.org> <mailto:users@ovirt.org
         <mailto:users@ovirt.org>>
                 <mailto:users@ovirt.org <mailto:users@ovirt.org>
         <mailto:users@ovirt.org <mailto:users@ovirt.org>>>>
                     > Sent: Friday, April 11, 2014 12:04:23 PM
                     > Subject: Re: [ovirt-users] Re-add a node
                     >
                     > The engine is the same but the node (node1) has been
                 reinstalled ...

                     So you need to re-add it to the engine.
                     Delete the old node at engine side and use the
         node user
                 interface
                     to add it to the engine.

                     >
                     >
                     > 2014-04-11 10:48 GMT+02:00 James James <
         jreg2k(a)gmail.com <mailto:jreg2k@gmail.com>
         <mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>>
                     <mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>
         <mailto:jreg2k@gmail.com <mailto:jreg2k@gmail.com>>> > :

                     >
                     >
                     >
                     > the log contains information about the first node1
                 installation ....
                     >
                     > http://pastebin.com/mZSb2wmD
                     >
                     >
                     > 2014-04-11 10:12 GMT+02:00 Dafna Ron <
         dron(a)redhat.com <mailto:dron@redhat.com>
                 <mailto:dron@redhat.com <mailto:dron@redhat.com>>
                     <mailto:dron@redhat.com <mailto:dron@redhat.com>
         <mailto:dron@redhat.com <mailto:dron@redhat.com>>> > :

                     >
                     >
                     >
                     > please add the host-deploy log from
                 /var/log/ovirt-engine/host-
                     deploy/
                     >
                     >
                     > On 04/11/2014 12:11 AM, James James wrote:
                     >
                     >
                     >
                     > Hi,
                     > I don know i the subject is explicit enough but
         I have a
                 problem
                     and I hope
                     > to find some help here.
                     >
                     > I had two hosts in my cluster (node1 and node2).
         I had to
                     reinstall node1 due
                     > to some networks problem. In the engine, node1
         appears
                 now "Not
                     reponsive"
                     > and I can't remove it from the engine ui.
                     >
                     > Now node1 is back and I want to add it in the
         cluster but I
                     can't. I've got
                     > this error (vdsm.log) :
                     > BindingXMLRPC::ERROR::2014-04- 11 01
         <tel:2014-04-%2011%2001>
                 <tel:2014-04-%2011%2001>
                     <tel:2014-04-%2011%2001>:04:42,622::BindingXMLRPC::

                     > 81::vds::(threaded_start) xml-rpc handler exception
                     > Traceback (most recent call last):
                     > File "/usr/share/vdsm/ BindingXMLRPC.py", line
         77, in
                 threaded_start
                     > self.server.handle_request()
                     > File "/usr/lib64/python2.6/ SocketServer.py",
         line 278, in
                     handle_request
                     > self._handle_request_noblock()
                     > File "/usr/lib64/python2.6/ SocketServer.py",
         line 288, in
                     > _handle_request_noblock
                     > request, client_address = self.get_request()
                     > File "/usr/lib64/python2.6/ SocketServer.py",
         line 456, in
                     get_request
                     > return self.socket.accept()
                     > File "/usr/lib64/python2.6/site- packages/vdsm/
                     SecureXMLRPCServer.py", line
                     > 136, in accept
                     > raise SSL.SSLError("%s, client %s" % (e,
         address[0]))
                     > SSLError: sslv3 alert certificate unknown, client
                 192.168.1.100
                     >
                     > 192.168.1.100 is the engine's address
                     >
                     > Can somebody help me ?
                     >
                     >
                     >
                     > ______________________________ _________________
                     > Users mailing list
                     > Users(a)ovirt.org <mailto:Users@ovirt.org>
         <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
                 <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
         <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>

                     > http://lists.ovirt.org/ mailman/listinfo/users
                     >
                     >
                     > --
                     > Dafna Ron
                     >
                     >
                     >
                     > _______________________________________________
                     > Users mailing list
                     > Users(a)ovirt.org <mailto:Users@ovirt.org>
         <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
                 <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
         <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>

                     > http://lists.ovirt.org/mailman/listinfo/users
                     >

             --     Dafna Ron

     -- 
     Dafna Ron

-- 
Dafna Ron

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Re: [ovirt-users] Re-add a node