5:20 a.m.
Hi,
I have simple cluster with node11 having 2nd network for DMZ zone (for internet servers).
This network attached to node11 2nd ethernet adapter called ‘DMZ_node11’.
Now I’m trying to add 2nd host to the cluster (node12).
Attempt to activate newly added node12 results in this error.
Host node12 does not comply with the cluster ClusterRiga11 networks, the following
networks are missing on host: ‘DMZ_node11'
However, I found no way to add new host to the oVirt network ‘DMZ_node11’.
Network -> Networks -> DMZ_Node11 -> Setup Host Network lists only Ethernet
interfaces on node11, not on new node12.
Cluster is running, screwing something up is not an option.
How I can fix this problem ?
Thanks in advance.
Andrei
6:13 a.m.
On Mon, 16 Apr 2018 13:20:18 +0300
Andrei Verovski <andreil1(a)starlett.lv> wrote:
Hi,
I have simple cluster with node11 having 2nd network for DMZ zone
(for internet servers). This network attached to node11 2nd ethernet
adapter called ‘DMZ_node11’.
Now I’m trying to add 2nd host to the cluster (node12).
Attempt to activate newly added node12 results in this error.
Host node12 does not comply with the cluster ClusterRiga11 networks,
the following networks are missing on host: ‘DMZ_node11'
However, I found no way to add new host to the oVirt network
‘DMZ_node11’. Network -> Networks -> DMZ_Node11 -> Setup Host Network
lists only Ethernet interfaces on node11, not on new node12.
Cluster is running, screwing something up is not an option.
How I can fix this problem ?
You can add the network "DMZ_node11" via the dialog in
Compute -> Hosts -> node12 -> Network Interfaces -> Setup Host Networks
Thanks in advance.
Andrei
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:32 a.m.
The host node12 does not appear under any network in the networks list
because, as you said, node12 has not been connected yet to any network.
The error you are getting is because the network ‘DMZ_node11' is required
on all hosts in the cluster to which you are trying to add node12.
You can either make network ‘DMZ_node11' not required temporarily or
connect it to node12.
To make a network non-required go to Compute -> Clusters -> your cluster ->
Logical Networks -> Manage Networks and uncheck the required check-box.
To connect a network to a host (e.g. node12) , go to Compute -> Hosts ->
node12 -> Network Interfaces -> Setup Host Networks
and attach the required network to the desired interface.
HTH
On Mon, Apr 16, 2018 at 1:20 PM, Andrei Verovski <andreil1(a)starlett.lv>
wrote:
Hi,
I have simple cluster with node11 having 2nd network for DMZ zone (for
internet servers). This network attached to node11 2nd ethernet adapter
called ‘DMZ_node11’.
Now I’m trying to add 2nd host to the cluster (node12).
Attempt to activate newly added node12 results in this error.
Host node12 does not comply with the cluster ClusterRiga11 networks, the
following networks are missing on host: ‘DMZ_node11'
However, I found no way to add new host to the oVirt network ‘DMZ_node11’.
Network -> Networks -> DMZ_Node11 -> Setup Host Network lists only
Ethernet interfaces on node11, not on new node12.
Cluster is running, screwing something up is not an option.
How I can fix this problem ?
Thanks in advance.
Andrei
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Eitan Raviv
IRC: erav (#ovirt #vdsm #devel #rhev-dev)
2414
days inactive
2414
days old
2 comments
3 participants
participants (3)
-
Andrei Verovski -
Dominik Holler -
Eitan Raviv