10:50 a.m.
This is a multi-part message in MIME format.
--------------DDB6A5C853028C92A7A2BFFF
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage
LUN, so far so good.
For some reason I'm not able to start the hosted-engine VM, after
digging in the log files i could figured out the reason. The Network
device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:*None*,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file
/var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to
ovirtmgnt, the I could start the hosted-engine using :
hosted-engine --vm-start
--vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:*ovirtmgmt*,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is
constantly rewritten, even when using the webui is say's:
HostedEngine:
* There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it
will stay and not be overwritten?
Thanks a lot for any hint/help
rgds,
arsène
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
--------------DDB6A5C853028C92A7A2BFFF
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="content-type" content="text/html;
charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Hi,</p>
<p>I've migrated our oVirt engine to hosted-engine located on a FC
storage LUN, so far so good.<br>
For some reason I'm not able to start the hosted-engine VM, after
digging in the log files i could figured out the reason. The
Network device was set to "None" as follow:<br>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:<b>None</b>,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}</p>
<p>I've created a new config file
/var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device
to ovirtmgnt, the I could start the hosted-engine using :<br>
hosted-engine --vm-start
--vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new</p>
<p>The nic device line in vm.conf.new looks like:<br>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:<b>ovirtmgmt</b>,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}</p>
<p>I tried to find out a way to change this setting on vm.conf but
it is constantly rewritten, even when using the webui is say's:<br>
<span style="color: rgb(0, 0, 0); font-family: "Arial Unicode
MS", Arial, sans-serif; font-size: small; font-style:
normal; font-variant-ligatures: normal; font-variant-caps:
normal; font-weight: normal; letter-spacing: normal; orphans: 2;
text-align: start; text-indent: 0px; text-transform: none;
white-space: normal; widows: 2; word-spacing: 0px;
-webkit-text-stroke-width: 0px; background-color: rgb(255, 255,
255); text-decoration-style: initial; text-decoration-color:
initial; display: inline !important; float:
none;">HostedEngine:</span></p>
<ul style="box-sizing: border-box; margin-top: 0px; margin-bottom:
10px; color: rgb(0, 0, 0); font-family: "Arial Unicode
MS", Arial, sans-serif; font-size: small; font-style: normal;
font-variant-ligatures: normal; font-variant-caps: normal;
font-weight: normal; letter-spacing: normal; orphans: 2;
text-align: start; text-indent: 0px; text-transform: none;
white-space: normal; widows: 2; word-spacing: 0px;
-webkit-text-stroke-width: 0px; background-color: rgb(255, 255,
255); text-decoration-style: initial; text-decoration-color:
initial;">
<li style="box-sizing: border-box;">There was an attempt to change
Hosted Engine VM values that are locked.</li>
</ul>
<p>Is there a way to modify/correct the hosted-engine vm.conf file
so it will stay and not be overwritten?</p>
<p>Thanks a lot for any hint/help</p>
<p>rgds,<br>
arsène<br>
</p>
<div class="moz-signature">-- <br>
<p class="western" style="margin-bottom: 0in; line-height:
150%">
<font color="#000000"><font face="Tahoma, serif">
<font
style="font-size: 8pt" size="1"> <b>Arsène
Gschwind</b> </font>
</font>
<font color="#000000"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> </font>
</font>
</font>
<font face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> </font>
</font>
<font face="Tahoma, serif">
</font>
<font color="#000000"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> <br>
</font> </font>
</font>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> Fa. Sapify AG im
Auftrag der Universität Basel<br>
IT Services<br>
Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br>
Tel. +41 79 449 25 63 | </font> </font>
</font>
<a href="http://its.unibas.ch/"> <font face="Tahoma,
serif">
<font style="font-size: 8pt" size="1">
http://its.unibas.ch </font> </font>
</a><br>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> ITS-ServiceDesk:
<a class="moz-txt-link-abbreviated"
href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61
267 14 11 </font> </font>
</font>
</font></p>
<font color="#000000">
</font></div>
</body>
</html>
--------------DDB6A5C853028C92A7A2BFFF--
10:59 a.m.
This is a multi-part message in MIME format.
--------------0B6C36DE6206FC2B9BE680EE
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Ive forgot to mention, i'm runing the latest oVirt 4.1.2 version.
Thanks
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC
storage LUN, so far so good.
For some reason I'm not able to start the hosted-engine VM, after
digging in the log files i could figured out the reason. The Network
device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:*None*,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file
/var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to
ovirtmgnt, the I could start the hosted-engine using :
hosted-engine --vm-start
--vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:*ovirtmgmt*,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is
constantly rewritten, even when using the webui is say's:
HostedEngine:
* There was an attempt to change Hosted Engine VM values that are
locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it
will stay and not be overwritten?
Thanks a lot for any hint/help
rgds,
arsène
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
--------------0B6C36DE6206FC2B9BE680EE
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Ive forgot to mention, i'm runing the latest oVirt 4.1.2
version.</p>
<p>Thanks<br>
</p>
<br>
<div class="moz-cite-prefix">On 06/06/2017 09:50 AM, Arsène Gschwind
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:c3b7e68a-7892-bd62-f0ba-a6a67a4d7390@unibas.ch">
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<p>Hi,</p>
<p>I've migrated our oVirt engine to hosted-engine located on a FC
storage LUN, so far so good.<br>
For some reason I'm not able to start the hosted-engine VM,
after digging in the log files i could figured out the reason.
The Network device was set to "None" as follow:<br>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:<b>None</b>,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}</p>
<p>I've created a new config file
/var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic
device to ovirtmgnt, the I could start the hosted-engine using :<br>
hosted-engine --vm-start
--vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new</p>
<p>The nic device line in vm.conf.new looks like:<br>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:<b>ovirtmgmt</b>,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}</p>
<p>I tried to find out a way to change this setting on vm.conf but
it is constantly rewritten, even when using the webui is say's:<br>
<span style="color: rgb(0, 0, 0); font-family: "Arial
Unicode MS", Arial, sans-serif; font-size: small;
font-style: normal; font-variant-ligatures: normal;
font-variant-caps: normal; font-weight: normal;
letter-spacing: normal; orphans: 2; text-align: start;
text-indent: 0px; text-transform: none; white-space: normal;
widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px;
background-color: rgb(255, 255, 255); text-decoration-style:
initial; text-decoration-color: initial; display: inline
!important; float: none;">HostedEngine:</span></p>
<ul style="box-sizing: border-box; margin-top: 0px; margin-bottom:
10px; color: rgb(0, 0, 0); font-family: "Arial Unicode
MS", Arial, sans-serif; font-size: small; font-style:
normal; font-variant-ligatures: normal; font-variant-caps:
normal; font-weight: normal; letter-spacing: normal; orphans: 2;
text-align: start; text-indent: 0px; text-transform: none;
white-space: normal; widows: 2; word-spacing: 0px;
-webkit-text-stroke-width: 0px; background-color: rgb(255, 255,
255); text-decoration-style: initial; text-decoration-color:
initial;">
<li style="box-sizing: border-box;">There was an attempt to
change Hosted Engine VM values that are locked.</li>
</ul>
<p>Is there a way to modify/correct the hosted-engine vm.conf file
so it will stay and not be overwritten?</p>
<p>Thanks a lot for any hint/help</p>
<p>rgds,<br>
arsène<br>
</p>
<div class="moz-signature">-- <br>
<p class="western" style="margin-bottom: 0in; line-height:
150%">
<font color="#000000"><font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> <b>Arsène
Gschwind</b>
</font> </font> <font color="#000000"> <font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> </font> </font> </font>
<font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> </font> </font> <font
face="Tahoma, serif">
</font> <font color="#000000"> <font
face="Tahoma, serif">
<font style="font-size: 8pt" size="1">
<br>
</font> </font> </font> <font
color="#7f7f7f"> <font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> Fa. Sapify AG im Auftrag der Universität
Basel<br>
IT Services<br>
Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br>
Tel. +41 79 449 25 63 | </font> </font> </font>
<a
href="http://its.unibas.ch/" moz-do-not-send="true">
<font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> http://its.unibas.ch </font> </font>
</a><br>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> ITS-ServiceDesk:
<a
class="moz-txt-link-abbreviated"
href="mailto:support-its@unibas.ch"
moz-do-not-send="true">support-its(a)unibas.ch</a> |
+41 61 267 14 11 </font> </font> </font>
</font></p>
<font color="#000000"> </font></div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
<div class="moz-signature">-- <br>
<p class="western" style="margin-bottom: 0in; line-height:
150%">
<font color="#000000"><font face="Tahoma, serif">
<font
style="font-size: 8pt" size="1"> <b>Arsène
Gschwind</b> </font>
</font>
<font color="#000000"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> </font>
</font>
</font>
<font face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> </font>
</font>
<font face="Tahoma, serif">
</font>
<font color="#000000"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> <br>
</font> </font>
</font>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> Fa. Sapify AG im
Auftrag der Universität Basel<br>
IT Services<br>
Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br>
Tel. +41 79 449 25 63 | </font> </font>
</font>
<a href="http://its.unibas.ch/"> <font face="Tahoma,
serif">
<font style="font-size: 8pt" size="1">
http://its.unibas.ch </font> </font>
</a><br>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> ITS-ServiceDesk:
<a class="moz-txt-link-abbreviated"
href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61
267 14 11 </font> </font>
</font>
</font></p>
<font color="#000000">
</font></div>
</body>
</html>
--------------0B6C36DE6206FC2B9BE680EE--
11:47 a.m.
This is a multi-part message in MIME format.
--------------4E26105B11472427D1B97A54
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Hi,
Any chance to get a hint how to change the vm.conf file so it will not
be overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC
storage LUN, so far so good.
For some reason I'm not able to start the hosted-engine VM, after
digging in the log files i could figured out the reason. The Network
device was set to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:*None*,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file
/var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic device to
ovirtmgnt, the I could start the hosted-engine using :
hosted-engine --vm-start
--vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:*ovirtmgmt*,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is
constantly rewritten, even when using the webui is say's:
HostedEngine:
* There was an attempt to change Hosted Engine VM values that are
locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it
will stay and not be overwritten?
Thanks a lot for any hint/help
rgds,
arsène
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
--------------4E26105B11472427D1B97A54
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Hi,</p>
<p>Any chance to get a hint how to change the vm.conf file so it
will not be overwritten constantly?</p>
<p>Thanks a lot.</p>
<p>Arsène<br>
</p>
<br>
<div class="moz-cite-prefix">On 06/06/2017 09:50 AM, Arsène Gschwind
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:c3b7e68a-7892-bd62-f0ba-a6a67a4d7390@unibas.ch">
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<p>Hi,</p>
<p>I've migrated our oVirt engine to hosted-engine located on a FC
storage LUN, so far so good.<br>
For some reason I'm not able to start the hosted-engine VM,
after digging in the log files i could figured out the reason.
The Network device was set to "None" as follow:<br>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:<b>None</b>,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}</p>
<p>I've created a new config file
/var/run/ovirt-hosted-engine-ha/vm.conf.new and set the nic
device to ovirtmgnt, the I could start the hosted-engine using :<br>
hosted-engine --vm-start
--vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new</p>
<p>The nic device line in vm.conf.new looks like:<br>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:<b>ovirtmgmt</b>,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}</p>
<p>I tried to find out a way to change this setting on vm.conf but
it is constantly rewritten, even when using the webui is say's:<br>
<span style="color: rgb(0, 0, 0); font-family: "Arial
Unicode MS", Arial, sans-serif; font-size: small;
font-style: normal; font-variant-ligatures: normal;
font-variant-caps: normal; font-weight: normal;
letter-spacing: normal; orphans: 2; text-align: start;
text-indent: 0px; text-transform: none; white-space: normal;
widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px;
background-color: rgb(255, 255, 255); text-decoration-style:
initial; text-decoration-color: initial; display: inline
!important; float: none;">HostedEngine:</span></p>
<ul style="box-sizing: border-box; margin-top: 0px; margin-bottom:
10px; color: rgb(0, 0, 0); font-family: "Arial Unicode
MS", Arial, sans-serif; font-size: small; font-style:
normal; font-variant-ligatures: normal; font-variant-caps:
normal; font-weight: normal; letter-spacing: normal; orphans: 2;
text-align: start; text-indent: 0px; text-transform: none;
white-space: normal; widows: 2; word-spacing: 0px;
-webkit-text-stroke-width: 0px; background-color: rgb(255, 255,
255); text-decoration-style: initial; text-decoration-color:
initial;">
<li style="box-sizing: border-box;">There was an attempt to
change Hosted Engine VM values that are locked.</li>
</ul>
<p>Is there a way to modify/correct the hosted-engine vm.conf file
so it will stay and not be overwritten?</p>
<p>Thanks a lot for any hint/help</p>
<p>rgds,<br>
arsène<br>
</p>
<div class="moz-signature">-- <br>
<p class="western" style="margin-bottom: 0in; line-height:
150%">
<font color="#000000"><font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> <b>Arsène
Gschwind</b>
</font> </font> <font color="#000000"> <font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> </font> </font> </font>
<font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> </font> </font> <font
face="Tahoma, serif">
</font> <font color="#000000"> <font
face="Tahoma, serif">
<font style="font-size: 8pt" size="1">
<br>
</font> </font> </font> <font
color="#7f7f7f"> <font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> Fa. Sapify AG im Auftrag der Universität
Basel<br>
IT Services<br>
Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br>
Tel. +41 79 449 25 63 | </font> </font> </font>
<a
href="http://its.unibas.ch/" moz-do-not-send="true">
<font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> http://its.unibas.ch </font> </font>
</a><br>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> ITS-ServiceDesk:
<a
class="moz-txt-link-abbreviated"
href="mailto:support-its@unibas.ch"
moz-do-not-send="true">support-its(a)unibas.ch</a> |
+41 61 267 14 11 </font> </font> </font>
</font></p>
<font color="#000000"> </font></div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
<div class="moz-signature">-- <br>
<p class="western" style="margin-bottom: 0in; line-height:
150%">
<font color="#000000"><font face="Tahoma, serif">
<font
style="font-size: 8pt" size="1"> <b>Arsène
Gschwind</b> </font>
</font>
<font color="#000000"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> </font>
</font>
</font>
<font face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> </font>
</font>
<font face="Tahoma, serif">
</font>
<font color="#000000"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> <br>
</font> </font>
</font>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> Fa. Sapify AG im
Auftrag der Universität Basel<br>
IT Services<br>
Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br>
Tel. +41 79 449 25 63 | </font> </font>
</font>
<a href="http://its.unibas.ch/"> <font face="Tahoma,
serif">
<font style="font-size: 8pt" size="1">
http://its.unibas.ch </font> </font>
</a><br>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> ITS-ServiceDesk:
<a class="moz-txt-link-abbreviated"
href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61
267 14 11 </font> </font>
</font>
</font></p>
<font color="#000000">
</font></div>
</body>
</html>
--------------4E26105B11472427D1B97A54--
12:12 p.m.
If im not mistaken the values of vm.conf are repopulated from the database
, but i wouldn't recommend meddling with DB data.
maybe the network device wasn't set properly during the hosted engine setup
?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind(a)unibas.ch>
wrote:
Hi,
Any chance to get a hint how to change the vm.conf file so it will not be
overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage
LUN, so far so good.
For some reason I'm not able to start the hosted-engine VM, after digging
in the log files i could figured out the reason. The Network device was set
to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:
*None*,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:
0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:
bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new
and set the nic device to ovirtmgnt, the I could start the hosted-engine
using :
hosted-engine --vm-start --vm-conf=var/run/ovirt-
hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:
*ovirtmgmt*,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{
slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},
device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is
constantly rewritten, even when using the webui is say's:
HostedEngine:
- There was an attempt to change Hosted Engine VM values that are
locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will
stay and not be overwritten?
Thanks a lot for any hint/help
rgds,
arsène
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
<+41%2061%20267%2014%2011>
_______________________________________________
Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 <+41%2079%20449%2025%2063> | http://its.unibas.ch
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
<+41%2061%20267%2014%2011>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:27 p.m.
Hi all,
Yanir is right, the local vm.conf is just a cache of what was
retrieved from the engine.
I might be interesting to check what the configuration of the engine
VM shows when edited using the webadmin. Or enable debug logging [1]
for hosted engine and add the OVF dump we send there now and then (the
xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the
level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn(a)redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the
database ,
but i wouldn't recommend meddling with DB data.
maybe the network device wasn't set properly during the hosted engine setup
?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind(a)unibas.ch>
wrote:
>
> Hi,
>
> Any chance to get a hint how to change the vm.conf file so it will not be
> overwritten constantly?
>
> Thanks a lot.
>
> Arsène
>
>
> On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
>
> Hi,
>
> I've migrated our oVirt engine to hosted-engine located on a FC storage
> LUN, so far so good.
> For some reason I'm not able to start the hosted-engine VM, after digging
> in the log files i could figured out the reason. The Network device was set
> to "None" as follow:
>
>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
>
> I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new
> and set the nic device to ovirtmgnt, the I could start the hosted-engine
> using :
> hosted-engine --vm-start
> --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
>
> The nic device line in vm.conf.new looks like:
>
>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
>
> I tried to find out a way to change this setting on vm.conf but it is
> constantly rewritten, even when using the webui is say's:
> HostedEngine:
>
> There was an attempt to change Hosted Engine VM values that are locked.
>
> Is there a way to modify/correct the hosted-engine vm.conf file so it will
> stay and not be overwritten?
>
> Thanks a lot for any hint/help
>
> rgds,
> arsène
>
> --
>
> Arsène Gschwind
> Fa. Sapify AG im Auftrag der Universität Basel
> IT Services
> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
> Tel. +41 79 449 25 63 | http://its.unibas.ch
> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
> --
>
> Arsène Gschwind
> Fa. Sapify AG im Auftrag der Universität Basel
> IT Services
> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
> Tel. +41 79 449 25 63 | http://its.unibas.ch
> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
12:50 p.m.
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
Hi all,
Yanir is right, the local vm.conf is just a cache of what was
retrieved from the engine.
I might be interesting to check what the configuration of the engine
VM shows when edited using the webadmin. Or enable debug logging [1]
for hosted engine and add the OVF dump we send there now and then (the
xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the
level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn(a)redhat.com> wrote:
> If im not mistaken the values of vm.conf are repopulated from the database ,
> but i wouldn't recommend meddling with DB data.
> maybe the network device wasn't set properly during the hosted engine setup
> ?
>
> On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind(a)unibas.ch>
> wrote:
>> Hi,
>>
>> Any chance to get a hint how to change the vm.conf file so it will not be
>> overwritten constantly?
>>
>> Thanks a lot.
>>
>> Arsène
>>
>>
>> On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
>>
>> Hi,
>>
>> I've migrated our oVirt engine to hosted-engine located on a FC storage
>> LUN, so far so good.
>> For some reason I'm not able to start the hosted-engine VM, after digging
>> in the log files i could figured out the reason. The Network device was set
>> to "None" as follow:
>>
>>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
>>
>> I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new
>> and set the nic device to ovirtmgnt, the I could start the hosted-engine
>> using :
>> hosted-engine --vm-start
>> --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
>>
>> The nic device line in vm.conf.new looks like:
>>
>>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
>>
>> I tried to find out a way to change this setting on vm.conf but it is
>> constantly rewritten, even when using the webui is say's:
>> HostedEngine:
>>
>> There was an attempt to change Hosted Engine VM values that are locked.
>>
>> Is there a way to modify/correct the hosted-engine vm.conf file so it will
>> stay and not be overwritten?
>>
>> Thanks a lot for any hint/help
>>
>> rgds,
>> arsène
>>
>> --
>>
>> Arsène Gschwind
>> Fa. Sapify AG im Auftrag der Universität Basel
>> IT Services
>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
>> Tel. +41 79 449 25 63 | http://its.unibas.ch
>> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>> --
>>
>> Arsène Gschwind
>> Fa. Sapify AG im Auftrag der Universität Basel
>> IT Services
>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
>> Tel. +41 79 449 25 63 | http://its.unibas.ch
>> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
12:49 p.m.
This is a multi-part message in MIME format.
--------------EAB575F1E99FD25706F9D944
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Hi all,
Any chance to get help or a hint to solve my Problem, I have no idea how
to change this configuration since it is not possible using the WebUI.
Thanks a lot.
Regards,
Arsène
On 06/07/2017 11:50 AM, Arsène Gschwind wrote:
Hi all,
Please find attached the agent.log DEBUG and a screenshot from webui
Thanks a lot
Best regards,
Arsène
On 06/07/2017 11:27 AM, Martin Sivak wrote:
> Hi all,
>
> Yanir is right, the local vm.conf is just a cache of what was
> retrieved from the engine.
>
> I might be interesting to check what the configuration of the engine
> VM shows when edited using the webadmin. Or enable debug logging [1]
> for hosted engine and add the OVF dump we send there now and then (the
> xml representation of the VM).
>
> [1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the
> level for root logger to DEBUG
>
> Best regards
>
> Martin Sivak
>
> On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn<yquinn(a)redhat.com> wrote:
>> If im not mistaken the values of vm.conf are repopulated from the database ,
>> but i wouldn't recommend meddling with DB data.
>> maybe the network device wasn't set properly during the hosted engine setup
>> ?
>>
>> On Wed, Jun 7, 2017 at 11:47 AM, Arsène
Gschwind<arsene.gschwind(a)unibas.ch>
>> wrote:
>>> Hi,
>>>
>>> Any chance to get a hint how to change the vm.conf file so it will not be
>>> overwritten constantly?
>>>
>>> Thanks a lot.
>>>
>>> Arsène
>>>
>>>
>>> On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
>>>
>>> Hi,
>>>
>>> I've migrated our oVirt engine to hosted-engine located on a FC storage
>>> LUN, so far so good.
>>> For some reason I'm not able to start the hosted-engine VM, after
digging
>>> in the log files i could figured out the reason. The Network device was set
>>> to "None" as follow:
>>>
>>>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
>>>
>>> I've created a new config file
/var/run/ovirt-hosted-engine-ha/vm.conf.new
>>> and set the nic device to ovirtmgnt, the I could start the hosted-engine
>>> using :
>>> hosted-engine --vm-start
>>> --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
>>>
>>> The nic device line in vm.conf.new looks like:
>>>
>>>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
>>>
>>> I tried to find out a way to change this setting on vm.conf but it is
>>> constantly rewritten, even when using the webui is say's:
>>> HostedEngine:
>>>
>>> There was an attempt to change Hosted Engine VM values that are locked.
>>>
>>> Is there a way to modify/correct the hosted-engine vm.conf file so it will
>>> stay and not be overwritten?
>>>
>>> Thanks a lot for any hint/help
>>>
>>> rgds,
>>> arsène
>>>
>>> --
>>>
>>> Arsène Gschwind
>>> Fa. Sapify AG im Auftrag der Universität Basel
>>> IT Services
>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
>>> Tel. +41 79 449 25 63 |http://its.unibas.ch
>>> ITS-ServiceDesk:support-its@unibas.ch | +41 61 267 14 11
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>> --
>>>
>>> Arsène Gschwind
>>> Fa. Sapify AG im Auftrag der Universität Basel
>>> IT Services
>>> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
>>> Tel. +41 79 449 25 63 |http://its.unibas.ch
>>> ITS-ServiceDesk:support-its@unibas.ch | +41 61 267 14 11
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
--------------EAB575F1E99FD25706F9D944
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Hi all,</p>
<p>Any chance to get help or a hint to solve my Problem, I have no
idea how to change this configuration since it is not possible
using the WebUI.</p>
<p>Thanks a lot.</p>
<p>Regards,<br>
Arsène<br>
</p>
<br>
<div class="moz-cite-prefix">On 06/07/2017 11:50 AM, Arsène Gschwind
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:72c7340e-bea4-71c5-0724-fd2d74fdb3ee@unibas.ch">
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<p>Hi all,</p>
<p>Please find attached the agent.log DEBUG and a screenshot from
webui</p>
<p>Thanks a lot</p>
<p>Best regards,</p>
<p>Arsène<br>
</p>
<br>
<div class="moz-cite-prefix">On 06/07/2017 11:27 AM, Martin Sivak
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAF0zDV47BHigW3h0L1kjvUp82YnzkSFi4r358SQ3CvCWPoEMVg@mail.gmail.com">
<pre wrap="">Hi all,
Yanir is right, the local vm.conf is just a cache of what was
retrieved from the engine.
I might be interesting to check what the configuration of the engine
VM shows when edited using the webadmin. Or enable debug logging [1]
for hosted engine and add the OVF dump we send there now and then (the
xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the
level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <a class="moz-txt-link-rfc2396E"
href="mailto:yquinn@redhat.com"
moz-do-not-send="true">&lt;yquinn(a)redhat.com&gt;</a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">If im not mistaken the values of vm.conf are
repopulated from the database ,
but i wouldn't recommend meddling with DB data.
maybe the network device wasn't set properly during the hosted engine setup
?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <a
class="moz-txt-link-rfc2396E" href="mailto:arsene.gschwind@unibas.ch"
moz-do-not-send="true">&lt;arsene.gschwind(a)unibas.ch&gt;</a>
wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi,
Any chance to get a hint how to change the vm.conf file so it will not be
overwritten constantly?
Thanks a lot.
Arsène
On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
Hi,
I've migrated our oVirt engine to hosted-engine located on a FC storage
LUN, so far so good.
For some reason I'm not able to start the hosted-engine VM, after digging
in the log files i could figured out the reason. The Network device was set
to "None" as follow:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new
and set the nic device to ovirtmgnt, the I could start the hosted-engine
using :
hosted-engine --vm-start
--vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
The nic device line in vm.conf.new looks like:
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
I tried to find out a way to change this setting on vm.conf but it is
constantly rewritten, even when using the webui is say's:
HostedEngine:
There was an attempt to change Hosted Engine VM values that are locked.
Is there a way to modify/correct the hosted-engine vm.conf file so it will
stay and not be overwritten?
Thanks a lot for any hint/help
rgds,
arsène
--
Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext"
href="http://its.unibas.ch"
moz-do-not-send="true">http://its.unibas.ch</a>
ITS-ServiceDesk: <a class="moz-txt-link-abbreviated"
href="mailto:support-its@unibas.ch"
moz-do-not-send="true">support-its(a)unibas.ch</a> | +41 61 267 14 11
_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org"
moz-do-not-send="true">Users(a)ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users"
moz-do-not-send="true">http://lists.ovirt.org/mailman/listin...
--
Arsène Gschwind
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | <a class="moz-txt-link-freetext"
href="http://its.unibas.ch"
moz-do-not-send="true">http://its.unibas.ch</a>
ITS-ServiceDesk: <a class="moz-txt-link-abbreviated"
href="mailto:support-its@unibas.ch"
moz-do-not-send="true">support-its(a)unibas.ch</a> | +41 61 267 14 11
_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org"
moz-do-not-send="true">Users(a)ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users"
moz-do-not-send="true">http://lists.ovirt.org/mailman/listin...
</pre>
</blockquote>
<pre wrap="">
_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org"
moz-do-not-send="true">Users(a)ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users"
moz-do-not-send="true">http://lists.ovirt.org/mailman/listin...
</pre>
</blockquote>
</blockquote>
<br>
<div class="moz-signature">-- <br>
<p class="western" style="margin-bottom: 0in; line-height:
150%">
<font color="#000000"><font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> <b>Arsène
Gschwind</b>
</font> </font> <font color="#000000"> <font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> </font> </font> </font>
<font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> </font> </font> <font
face="Tahoma, serif">
</font> <font color="#000000"> <font
face="Tahoma, serif">
<font style="font-size: 8pt" size="1">
<br>
</font> </font> </font> <font
color="#7f7f7f"> <font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> Fa. Sapify AG im Auftrag der Universität
Basel<br>
IT Services<br>
Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br>
Tel. +41 79 449 25 63 | </font> </font> </font>
<a
href="http://its.unibas.ch/" moz-do-not-send="true">
<font
face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> http://its.unibas.ch </font> </font>
</a><br>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> ITS-ServiceDesk:
<a
class="moz-txt-link-abbreviated"
href="mailto:support-its@unibas.ch"
moz-do-not-send="true">support-its(a)unibas.ch</a> |
+41 61 267 14 11 </font> </font> </font>
</font></p>
<font color="#000000"> </font></div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated"
href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.ovirt.org/mailman/listinfo/users">http://...
</pre>
</blockquote>
<br>
<div class="moz-signature">-- <br>
<p class="western" style="margin-bottom: 0in; line-height:
150%">
<font color="#000000"><font face="Tahoma, serif">
<font
style="font-size: 8pt" size="1"> <b>Arsène
Gschwind</b> </font>
</font>
<font color="#000000"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> </font>
</font>
</font>
<font face="Tahoma, serif"> <font style="font-size:
8pt"
size="1"> </font>
</font>
<font face="Tahoma, serif">
</font>
<font color="#000000"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> <br>
</font> </font>
</font>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> Fa. Sapify AG im
Auftrag der Universität Basel<br>
IT Services<br>
Klingelbergstr. 70 | CH-4056 Basel | Switzerland<br>
Tel. +41 79 449 25 63 | </font> </font>
</font>
<a href="http://its.unibas.ch/"> <font face="Tahoma,
serif">
<font style="font-size: 8pt" size="1">
http://its.unibas.ch </font> </font>
</a><br>
<font color="#7f7f7f"> <font face="Tahoma,
serif"> <font
style="font-size: 8pt" size="1"> ITS-ServiceDesk:
<a class="moz-txt-link-abbreviated"
href="mailto:support-its@unibas.ch">support-its@unibas.ch</a> | +41 61
267 14 11 </font> </font>
</font>
</font></p>
<font color="#000000">
</font></div>
</body>
</html>
--------------EAB575F1E99FD25706F9D944--
2721
days inactive
2727
days old
6 comments
3 participants
participants (3)
-
Arsène Gschwind -
Martin Sivak -
Yanir Quinn