[ovirt-users] Re: 4.3 won't upgrade engine in standalone KVM VM: low_custom_compatibility_version 'agent03'

On Fri, Jul 5, 2019 at 3:06 PM Richard Chan <richard(a)treeboxsolutions.com&gt; wrote: > In libvirt/virsh the VM is called "ovirt7"; here is the domain > definition. This VM has been upgraded from > 3.6->4.0->4.1->4.2. This is the first time engine-setup has complained > about the "level" of the VM. > > libvirt domain definition: > oVirt VMs contains something like: <metadata xmlns:ns0="http://ovirt.org/vm/tune/1.0" xmlns:ovirt-vm=" http://ovirt.org/vm/1.0"> <ns0:qos/> <ovirt-vm:vm xmlns:ovirt-vm="http://ovirt.org/vm/1.0"> <ovirt-vm:clusterVersion>4.2</ovirt-vm:clusterVersion> in the XML for libvirt so you are checking the wrong VM. > > <domain type='kvm' id='15'> > <name>ovirt7</name> > <uuid>cdb0f3fd-42c7-4a16-bcd1-5d65f19aca19</uuid> > <memory unit='KiB'>8388608</memory> > <currentMemory unit='KiB'>8388608</currentMemory> > <vcpu placement='static'>2</vcpu> > <resource> > <partition>/machine</partition> > </resource> > <os> > <type arch='x86_64' machine='pc-i440fx-rhel7.3.0'>hvm</type> > <loader readonly='yes' > type='pflash'>/usr/share/edk2.git/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> > <nvram>/var/lib/libvirt/qemu/nvram/ovirt7_VARS.fd</nvram> > <boot dev='hd'/> > </os> > <features> > <acpi/> > <apic/> > <vmport state='off'/> > </features> > <cpu mode='custom' match='exact' check='full'> > <model fallback='forbid'>Haswell-noTSX</model> > <feature policy='require' name='vme'/> > <feature policy='require' name='f16c'/> > <feature policy='require' name='rdrand'/> > <feature policy='require' name='hypervisor'/> > <feature policy='require' name='arat'/> > <feature policy='require' name='xsaveopt'/> > <feature policy='require' name='abm'/> > </cpu> > <clock offset='utc'> > <timer name='rtc' tickpolicy='catchup'/> > <timer name='pit' tickpolicy='delay'/> > <timer name='hpet' present='no'/> > </clock> > <on_poweroff>destroy</on_poweroff> > <on_reboot>restart</on_reboot> > <on_crash>destroy</on_crash> > <pm> > <suspend-to-mem enabled='no'/> > <suspend-to-disk enabled='no'/> > </pm> > <devices> > <emulator>/usr/libexec/qemu-kvm</emulator> > <disk type='file' device='disk'> > <driver name='qemu' type='qcow2'/> > <source file='/var/lib/libvirt/images/ovirt7/ovengine7.qcow2'/> > <backingStore type='file' index='1'> > <format type='raw'/> > <source file='/var/lib/libvirt/images/ovirt7/ovirt_01.WAEqcow2'/> > <backingStore/> > </backingStore> > <target dev='sda' bus='scsi'/> > <alias name='scsi0-0-0-0'/> > <address type='drive' controller='0' bus='0' target='0' unit='0'/> > </disk> > <disk type='file' device='disk'> > <driver name='qemu' type='qcow2'/> > <source file='/var/lib/libvirt/images/ovirt7/database.qcow2'/> > <backingStore type='file' index='1'> > <format type='raw'/> > <source > file='/var/lib/libvirt/images/ovirt7/database_01.WAEqcow2'/> > <backingStore/> > </backingStore> > <target dev='sdb' bus='scsi'/> > <alias name='scsi0-0-0-1'/> > <address type='drive' controller='0' bus='0' target='0' unit='1'/> > </disk> > <controller type='usb' index='0' model='ich9-ehci1'> > <alias name='usb'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x06' > function='0x7'/> > </controller> > <controller type='usb' index='0' model='ich9-uhci1'> > <alias name='usb'/> > <master startport='0'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x06' > function='0x0' multifunction='on'/> > </controller> > <controller type='usb' index='0' model='ich9-uhci2'> > <alias name='usb'/> > <master startport='2'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x06' > function='0x1'/> > </controller> > <controller type='usb' index='0' model='ich9-uhci3'> > <alias name='usb'/> > <master startport='4'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x06' > function='0x2'/> > </controller> > <controller type='scsi' index='0' model='virtio-scsi'> > <alias name='scsi0'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x05' > function='0x0'/> > </controller> > <controller type='pci' index='0' model='pci-root'> > <alias name='pci.0'/> > </controller> > <controller type='virtio-serial' index='0'> > <alias name='virtio-serial0'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x07' > function='0x0'/> > </controller> > <interface type='bridge'> > <mac address='52:54:00:87:54:91'/> > <source bridge='nm-bridge'/> > <target dev='vnet0'/> > <model type='virtio'/> > <alias name='net0'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' > function='0x0'/> > </interface> > <serial type='pty'> > <source path='/dev/pts/5'/> > <target port='0'/> > <alias name='serial0'/> > </serial> > <console type='pty' tty='/dev/pts/5'> > <source path='/dev/pts/5'/> > <target type='serial' port='0'/> > <alias name='serial0'/> > </console> > <channel type='unix'> > <source mode='bind' > path='/var/lib/libvirt/qemu/channel/target/domain-15-ovirt7/org.qemu.guest_agent.0'/> > <target type='virtio' name='org.qemu.guest_agent.0' > state='connected'/> > <alias name='channel0'/> > <address type='virtio-serial' controller='0' bus='0' port='1'/> > </channel> > <channel type='spicevmc'> > <target type='virtio' name='com.redhat.spice.0' > state='disconnected'/> > <alias name='channel1'/> > <address type='virtio-serial' controller='0' bus='0' port='2'/> > </channel> > <input type='tablet' bus='usb'> > <alias name='input0'/> > <address type='usb' bus='0' port='1'/> > </input> > <input type='mouse' bus='ps2'> > <alias name='input1'/> > </input> > <input type='keyboard' bus='ps2'> > <alias name='input2'/> > </input> > <graphics type='spice' port='5900' autoport='yes' listen='127.0.0.1'> > <listen type='address' address='127.0.0.1'/> > </graphics> > <sound model='ich6'> > <alias name='sound0'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x04' > function='0x0'/> > </sound> > <video> > <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' > primary='yes'/> > <alias name='video0'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x02' > function='0x0'/> > </video> > <redirdev bus='usb' type='spicevmc'> > <alias name='redir0'/> > <address type='usb' bus='0' port='2'/> > </redirdev> > <redirdev bus='usb' type='spicevmc'> > <alias name='redir1'/> > <address type='usb' bus='0' port='3'/> > </redirdev> > <memballoon model='virtio'> > <alias name='balloon0'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x08' > function='0x0'/> > </memballoon> > </devices> > <seclabel type='dynamic' model='selinux' relabel='yes'> > <label>system_u:system_r:svirt_t:s0:c194,c775</label> > <imagelabel>system_u:object_r:svirt_image_t:s0:c194,c775</imagelabel> > </seclabel> > <seclabel type='dynamic' model='dac' relabel='yes'> > <label>+107:+107</label> > <imagelabel>+107:+107</imagelabel> > </seclabel> > </domain> > > On Fri, Jul 5, 2019 at 8:53 PM Simone Tiraboschi <stirabos(a)redhat.com&gt; > wrote: > >> >> >> On Fri, Jul 5, 2019 at 2:48 PM Richard Chan < >> richard(a)treeboxsolutions.com&gt; wrote: >> >>> Hi, >>> >>> I am running 4.2 engine in a standalone libvirt KVM VM (running on a >>> hypervisor that is not part of the oVirt infrastructure); i.e., I am not >>> using hosted engine but still running engine in a VM. >>> >>> Now 4.3 won't upgrade inside this libvirt KVM VM: >>> >>> Failed to execute stage 'Setup validation': Cannot upgrade the Engine >>> due to low custom_compatibility_version for virtual >>> machines: ['agent03']. Please edit this virtual machines, in edit VM >>> dialog go to System->Advanced Parameters -> Custom Compatibility Version >>> and either reset to empty (cluster default) or set a value supported by the >>> new installation: 4.1, 4.2, 4.3. >>> >>> engine-setup has probably detected that it is running inside a VM: >>> 1. Where did it get 'agent03' string from >>> 2. Any suggestions how to fool engine-setup to think this is 4.3 >>> >> >> The engine is not going to check anything on hosts that are unknown at >> engine eyes. >> I think that you simply have in the engine a VM called 'agent03'. >> Please check it. >> >> >>> >>> Here is the dmidecode of the standalone engine VM: >>> >>> # dmidecode 3.1 >>> Getting SMBIOS data from sysfs. >>> SMBIOS 2.8 present. >>> 11 structures occupying 591 bytes. >>> Table at 0xBFED7000. >>> >>> Handle 0x0100, DMI type 1, 27 bytes >>> System Information >>> Manufacturer: Red Hat >>> Product Name: KVM >>> Version: RHEL 7.3.0 PC (i440FX + PIIX, 1996) >>> Serial Number: Not Specified >>> UUID: cdb0f3fd-42c7-4a16-bcd1-5d65f19aca19 >>> Wake-up Type: Power Switch >>> SKU Number: Not Specified >>> Family: Red Hat Enterprise Linux >>> >>> Handle 0x0300, DMI type 3, 21 bytes >>> Chassis Information >>> Manufacturer: Red Hat >>> Type: Other >>> Lock: Not Present >>> Version: RHEL 7.3.0 PC (i440FX + PIIX, 1996) >>> Serial Number: Not Specified >>> Asset Tag: Not Specified >>> Boot-up State: Safe >>> Power Supply State: Safe >>> Thermal State: Safe >>> Security Status: Unknown >>> OEM Information: 0x00000000 >>> Height: Unspecified >>> Number Of Power Cords: Unspecified >>> Contained Elements: 0 >>> >>> Handle 0x0400, DMI type 4, 42 bytes >>> Processor Information >>> Socket Designation: CPU 0 >>> Type: Central Processor >>> Family: Other >>> Manufacturer: Red Hat >>> ID: C1 06 03 00 FF FB 8B 07 >>> Version: RHEL 7.3.0 PC (i440FX + PIIX, 1996) >>> Voltage: Unknown >>> External Clock: Unknown >>> Max Speed: 2000 MHz >>> Current Speed: 2000 MHz >>> Status: Populated, Enabled >>> Upgrade: Other >>> L1 Cache Handle: Not Provided >>> L2 Cache Handle: Not Provided >>> L3 Cache Handle: Not Provided >>> Serial Number: Not Specified >>> Asset Tag: Not Specified >>> Part Number: Not Specified >>> Core Count: 1 >>> Core Enabled: 1 >>> Thread Count: 1 >>> Characteristics: None >>> >>> Handle 0x0401, DMI type 4, 42 bytes >>> Processor Information >>> Socket Designation: CPU 1 >>> Type: Central Processor >>> Family: Other >>> Manufacturer: Red Hat >>> ID: C1 06 03 00 FF FB 8B 07 >>> Version: RHEL 7.3.0 PC (i440FX + PIIX, 1996) >>> Voltage: Unknown >>> External Clock: Unknown >>> Max Speed: 2000 MHz >>> Current Speed: 2000 MHz >>> Status: Populated, Enabled >>> Upgrade: Other >>> L1 Cache Handle: Not Provided >>> L2 Cache Handle: Not Provided >>> L3 Cache Handle: Not Provided >>> Serial Number: Not Specified >>> Asset Tag: Not Specified >>> Part Number: Not Specified >>> Core Count: 1 >>> Core Enabled: 1 >>> Thread Count: 1 >>> Characteristics: None >>> >>> Handle 0x1000, DMI type 16, 23 bytes >>> Physical Memory Array >>> Location: Other >>> Use: System Memory >>> Error Correction Type: Multi-bit ECC >>> Maximum Capacity: 8 GB >>> Error Information Handle: Not Provided >>> Number Of Devices: 1 >>> >>> Handle 0x1100, DMI type 17, 40 bytes >>> Memory Device >>> Array Handle: 0x1000 >>> Error Information Handle: Not Provided >>> Total Width: Unknown >>> Data Width: Unknown >>> Size: 8192 MB >>> Form Factor: DIMM >>> Set: None >>> Locator: DIMM 0 >>> Bank Locator: Not Specified >>> Type: RAM >>> Type Detail: Other >>> Speed: Unknown >>> Manufacturer: Red Hat >>> Serial Number: Not Specified >>> Asset Tag: Not Specified >>> Part Number: Not Specified >>> Rank: Unknown >>> Configured Clock Speed: Unknown >>> Minimum Voltage: Unknown >>> Maximum Voltage: Unknown >>> Configured Voltage: Unknown >>> >>> Handle 0x1300, DMI type 19, 31 bytes >>> Memory Array Mapped Address >>> Starting Address: 0x00000000000 >>> Ending Address: 0x000BFFFFFFF >>> Range Size: 3 GB >>> Physical Array Handle: 0x1000 >>> Partition Width: 1 >>> >>> Handle 0x1301, DMI type 19, 31 bytes >>> Memory Array Mapped Address >>> Starting Address: 0x00100000000 >>> Ending Address: 0x0023FFFFFFF >>> Range Size: 5 GB >>> Physical Array Handle: 0x1000 >>> Partition Width: 1 >>> >>> Handle 0x2000, DMI type 32, 11 bytes >>> System Boot Information >>> Status: No errors detected >>> >>> Handle 0x0000, DMI type 0, 24 bytes >>> BIOS Information >>> Vendor: EFI Development Kit II / OVMF >>> Version: 0.0.0 >>> Release Date: 02/06/2015 >>> Address: 0xE8000 >>> Runtime Size: 96 kB >>> ROM Size: 64 kB >>> Characteristics: >>> BIOS characteristics not supported >>> Targeted content distribution is supported >>> UEFI is supported >>> System is a virtual machine >>> BIOS Revision: 0.0 >>> >>> Handle 0xFEFF, DMI type 127, 4 bytes >>> End Of Table >>> >>> Cheers >>> >>> -- >>> Richard Chan >>> >>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/VW6LVDLBNMZ... >>> >> >> >> -- >> >> Simone Tiraboschi >> >> He / Him / His >> >> Principal Software Engineer >> >> Red Hat <https://www.redhat.com/> >> >> stirabos(a)redhat.com >> @redhatjobs <https://twitter.com/redhatjobs> redhatjobs >> <https://www.facebook.com/redhatjobs> @redhatjobs >> <https://instagram.com/redhatjobs> >> <https://red.ht/sig> >> <https://redhat.com/summit> >> > > > -- > Richard Chan > Chief Architect > > TreeBox Solutions Pte Ltd > 1 Commonwealth Lane #03-01 > Singapore 149544 > Tel: 6570 3725 > http://www.treeboxsolutions.com > > Co.Reg.No. 201100585R > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/I3VGF3WHHXJ... > -- Simone Tiraboschi He / Him / His Principal Software Engineer Red Hat <https://www.redhat.com/> stirabos(a)redhat.com @redhatjobs <https://twitter.com/redhatjobs> redhatjobs <https://www.facebook.com/redhatjobs> @redhatjobs <https://instagram.com/redhatjobs> <https://red.ht/sig> <https://redhat.com/summit>