On Wed, Jul 20, 2016 at 6:18 PM, Nicolás <nicolas(a)devels.es> wrote:
El 20/07/16 a las 16:45, Martin Perina escribió:
On Wed, Jul 20, 2016 at 4:44 PM, Nicolás <nicolas(a)devels.es> wrote:
> Hi Martin,
>
> Actually, up until now we had that cert configured in httpd and in
> websocket proxy. Seems that now in 4.0.x it's not enough, as opening the
>
https://fqdn complains about the cert not being imported in the key
> chain.
>
Yes, there's an updated procedure on using external CA in 4.0, for
details please take a look at Doc Text in
https://bugzilla.redhat.com/show_bug.cgi?id=1336838
> So I imported it via keytool, but I don't want to use it in the engine
> <-> VDSM communication.
>
Hmm, so that would imply that we have some issue with existing internal
enigne CA during upgrade ...
The strange thing is that we test upgrades a lot but so far we haven't
seen any issues which will broke
SSL setup between engine and VDSM. You said that you had to downgrade back
to 3.6.7 (so unfortunately for us we cannot investigate your nonworking
setup more), but how did you do that?
Removing all engine packages and configuration, installing back 3.6.7
packaging and restoring configuration form backup?
I'm asking to know what changed in your setup between not working 4.0 and
working 3.6.7 ...
Indeed, those are the steps I followed to the point.
To add more strangeness, previously to upgrading this oVirt
infrastructure, we upgraded another one that we have (also using own cert,
a different one but from the same CA) and everything went smoothly. And
what's more, previously to upgrading the engine that failed, I created a
copy of that engine machine in a sandbox environment to see if upgrade
process would or not success, and it worked perfectly.
The only difference between the sandbox and the real machine's process was
that when upgrading the real one, the first time I run "engine-setup" it
failed because 'systemd' reported PostgreSQL as it was not running
(actually it was, thougg), so everything rolled back. I had to kill the
PostgreSQL process, start it again with systemctl and then run
"engine-setup", where the process completed successfully but the SSL issue
appeared. Not sure if this rollback could have shattered the whole thing...
Anyhow, tomorrow I'm going to create another copy of the engine machine to
a sandbox environment and try again. If it works I'll cross my fingers and
give another try on the real machine...
Thanks!
Thanks a lot for you effort. I will try to perform same upgrade tomorrow
in my test env.
Thanks
Martin
> Thanks!
> En 20/7/2016 2:48 p. m., Martin Perina <mperina(a)redhat.com> escribió:
>
> Hi,
>
> sorry for late response, I overlook your reply :-(
>
> I looked at your logs and it seems to me that there's SSL error when
> engine tries to contact VDSM.
> You have mentioned that your are using your own custom CA. Are you
> using it only for HTTPS certificate or do you want to use it also for
> Engine <-> VDSM communication?
>
> Martin Perina
>
>
> On Wed, Jul 20, 2016 at 9:18 AM, <nicolas(a)devels.es> wrote:
>
>> Any hints about this?
>>
>> El 2016-07-13 11:13, nicolas(a)devels.es escribió:
>>
>>> Hi,
>>>
>>> Unfortunately, upgrading to 4.0.1RC didn't solve the problem.
>>> Actually, the error changed to 'General SSLEngine problem', but the
>>> result was the same, like this:
>>>
>>> 2016-07-13 09:52:22,010 INFO
>>> [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp
>>> Reactor) [] Connecting to /10.X.X.X
>>> 2016-07-13 09:52:22,018 ERROR
>>> [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL Stomp Reactor)
>>> [] Unable to process messages: General SSLEngine problem
>>>
>>> It's worth mentioning that we're using our own SSL certificates (not
>>> self-signed), and I imported the combined certificate into the
>>> /etc/pki/ovirt-engine/.truststore key file. Not sure if related, but
>>> just in case.
>>>
>>
>>> I had to downgrade to 3.6.7. I'm attaching requested logs, if you need
>>> anything else don't hesitate to ask.
>>>
>>> Regards.
>>>
>>> El 2016-07-13 09:45, Martin Perina escribió:
>>>
>>>> Hi,
>>>>
>>>> could you please share also vdsm.log from your hosts and also
>>>> server.log and setup logs from /var/log/ovirt-engine/setup directory?
>>>>
>>>> Thanks
>>>>
>>>> Martin Perina
>>>>
>>>> On Wed, Jul 13, 2016 at 10:36 AM, <nicolas(a)devels.es> wrote:
>>>>
>>>> Hi,
>>>>>
>>>>> We upgraded from 3.6.6 to 4.0.0 and we have a big issue since the
>>>>> engine cannot connect to hosts. In the logs all we see is this
>>>>> error:
>>>>>
>>>>> ERROR [org.ovirt.vdsm.jsonrpc.client.reactors.Reactor] (SSL
>>>>> Stomp Reactor) [] Unable to process messages
>>>>>
>>>>> I'm attaching full logs.
>>>>>
>>>>> Could someone help please?
>>>>>
>>>>> Thanks.
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users(a)ovirt.org
>>>>>
http://lists.ovirt.org/mailman/listinfo/users [1]
>>>>>
>>>>
>>>>
>>>>
>>>> Links:
>>>> ------
>>>> [1]
http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>>
http://lists.ovirt.org/mailman/listinfo/users
>>>
>>
>