Re: [ovirt-users] management interface
Right now as we stand boht ovirt management and LAN data crosses the
same interface.
I have two bonds. I want to move ovirt management to its own bond and
tag it with vlan id 35.
Than I wan to move my LAN which has no tag and my dmz that does have a
tag in to my secondary bond.
The switch is all configured what I am not sure is when making the
logical network do I make the LAN a "VM Network"?
And the same question for my dmz tagged vlan...
I attached a small diagram that explains what I am trying to
accomplish... I hope :D
Thanks for the help.
Regards,
--
Fernando Fuentes
ffuentes(a)txweather.org
http://www.txweather.org
On Sun, Jul 31, 2016, at 12:50 PM, Edward Haas wrote:
On Sun, Jul 31, 2016 at 7:19 PM, Fernando Fuentes
<ffuentes(a)darktcp.net> wrote:
> Team,
>
> Is it possible to move the ovirt management interface to a
> separate vlan
> and keep it from been on the same interface as my LAN?
Networks, including the management one, can be assign as non-vlan or
as vlan on
different nics/bonds.
If you want to assign two or more networks on the same nic/bond, only
one can remain
non-vlan, the rest must be set with a vlan.
Vlan networks require that traffic entering the nic/bond is tagged,
therefore, the switch port
that the nic is connected to must be set as a trunk.
If you have a specific setup in mind, please draw a network
diagram for us.
>
> IE: assign a tag to ovirtmanagement and keep another interface
> as untag
> for my LAN to use with the VM's
>
> Thoughts ideas?
>
> TIA!
>
> Regards,
>
> --
> Fernando Fuentes ffuentes(a)txweather.org http://www.txweather.org
> _______________________________________________
> Users mailing list Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
Attachments:
- vlans.png (image/png — 256.1 KB)
- attachment.html (text/html — 3.5 KB)
