[ovirt-users] when configuring multi path logical network selection area is empty, hence not able to configure multipathing

Hi team, I have 4 node cluster where in each node I configured 2 dedicated 10 gig NIC with dedicated subnet each ( NIC 1 = 10.10.10.0/24, NIC 2 = 10.10.20.0/24 ) and on the array side I configured 2 targets with 10.10.10.0 /24 & another 2 target with 10.10.20.0/24 subnet. without any errors I could check in all four paths and able to mount iscsi luns in all 4 nodes. However when i try to configure mutipathing at Data center level I could see all the paths but not the logical network, it stays empty although I configured logical network label for both NICs with dedicated names as ISCSI1 & ISCI2. these logical names visible and green at the host network level, no errors, they are just L2 IP config Am I missing something here? what else I should do to enable multiplathing