Hi everyone,
I have this bloody card installed on a node, and it seems that no driver
can be loaded for it, "ip link sh" does not show it.
Any recommendation about installing this network card on oVirt 4.2.8 ?
lspci -v
....
05:00.0 Ethernet controller: NetXen Incorporated NX3031 Multifunction
1/10-Gigabit Server Adapter (rev 42)
Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server
Adapter
Flags: fast devsel, IRQ 31
Memory at d9c00000 (64-bit, non-prefetchable) [size=2M]
Memory at da000000 (64-bit, non-prefetchable) [size=32M]
Expansion ROM at d8000000 [disabled] [size=64K]
Capabilities: [40] MSI-X: Enable- Count=64 Masked-
Capabilities: [80] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75
Kernel modules: netxen_nic
05:00.1 Ethernet controller: NetXen Incorporated NX3031 Multifunction
1/10-Gigabit Server Adapter (rev 42)
Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server
Adapter
Flags: fast devsel, IRQ 33
Memory at d9e00000 (64-bit, non-prefetchable) [size=2M]
Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [40] MSI-X: Enable- Count=64 Masked-
Capabilities: [80] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75
Kernel modules: netxen_nic
dmesg | grep netxen
[ 2.188078] netxen_nic 0000:05:00.0: 2MB memory map
[ 2.188371] netxen_nic 0000:05:00.0: Timeout reached waiting for rom
done
[ 2.188442] netxen_nic 0000:05:00.0: Error getting board config info.
[ 2.189488] netxen_nic: probe of 0000:05:00.0 failed with error -5
[ 2.190438] netxen_nic 0000:05:00.1: 2MB memory map
[ 2.190741] netxen_nic 0000:05:00.1: Timeout reached waiting for rom
done
[ 2.190808] netxen_nic 0000:05:00.1: Error getting board config info.
[ 2.190964] netxen_nic: probe of 0000:05:00.1 failed with error -5
...
Thank you very much !
Leo
--
Best regards, Leo David