Also see this in engine:
Aug 6, 2020, 7:37:17 AM
VDSM someserver command Get Host Capabilities failed: Message timeout which
can be caused by communication issues
On Thu, 6 Aug 2020 at 07:09, Strahil Nikolov <hunter86_bg(a)yahoo.com> wrote:
Can you fheck for errors on the affected host. Most probably you need
На 6 август 2020 г. 7:40:23 GMT+03:00, Nardus Geldenhuys <
>Hope you are well. I get the following error when I tried to confirm
>Error while executing action: Cannot confirm 'Host has been rebooted'
>Valid Host statuses are "Non operational", "Maintenance" or
>And I can't put it in maintenance, only option is "restart" or
>On Thu, 6 Aug 2020 at 06:16, Strahil Nikolov <hunter86_bg(a)yahoo.com>
>> After rebooting the node, have you "marked" it that it was rebooted ?
>> Best Regards,
>> Strahil Nikolov
>> На 5 август 2020 г. 21:29:04 GMT+03:00, Nardus Geldenhuys <
>> nardusg(a)gmail.com> написа:
>> >Hi oVirt land
>> >Hope you are well. Got a bit of an issue, actually a big issue. We
>> >sort of dip of some sort. All the VM's is still running, but some of
>> >hosts is show "Unassigned" or "NonResponsive". So all
the hosts was
>> >UP and was fine before our dip. So I did increase
>> >240, no luck.
>> >I still get a timeout on the engine lock even thou I can connect to
>> >host from the engine using nc to test to port 54321. I also did
>> >vdsmd and also rebooted the host with no luck.
>> > nc -v someserver 54321
>> >Ncat: Version 7.50 ( https://nmap.org/ncat
>> >Ncat: Connected to 220.127.116.11:54321.
>> >2020-08-05 20:20:34,256+02 ERROR
>> >(EE-ManagedThreadFactory-engineScheduled-Thread-70)  EVENT_ID:
>> >VDS_BROKER_COMMAND_FAILURE(10,802), VDSM someserver command Get Host
>> >Capabilities failed: Message timeout which can be caused by
>> >Any troubleshoot ideas will be gladly appreciated.