[ovirt-users] Re: Emulex OneConnect 10Gb NICs on Ovirt 4.4.10

I hit this too, RH appears to have limited the supported PCI ids in their be2net and no longer includes the Emulex OneConnect in the list of supported IDs. I switched to the EL repo mainline kernels to resolve the issue on existing systems, it was a bit more fun on systems needing new installs of 8.x. I think I settled on installing an older system, switching kernels, and then upgrading to current. Good luck, -Darrell > On Apr 13, 2022, at 12:12 AM, thkam(a)hua.gr wrote: > > Hi > > We have a large number of HP servers where we use Ovirt and we are having problems upgrading the nodes to Ovirt 4.4.10 > > More specifically the servers have the Emulex OneConnect 10Gb NICs and what we did in previous Ovirt node installations was to download the driver rpm (e.g. kmod-be2net-12.0.0.0-8.el8_5.elrepo.x86_64.rpm) and then install it using "rpm -ivh ... " and carrying out "modprobe be2net" > > For 4.18.0-365 we could not find a separate rpm but it looks like this was included in kernel-modules-4.18.0-365.el8.x86_64.rpm ( https://centos.pkgs.org/8-stream/centos-baseos-x86_64/kernel-modules-4.18...) which is already installed. "modprobe be2net" produces no errors but the network interfaces do not show up in "ip -a" even after reboot. > > Are we missing something here, or is our infrastructure unusable with 4.4.10? Things were working for 4.4.9. > > Thanks! > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AFSJ76ZGLMM...