10:10 a.m.
I didn't install double. The one package was the version on the FC17 box
and the other was FC18 box.
On Thu, May 30, 2013 at 9:08 AM, Hans de Goede <hdegoede(a)redhat.com> wrote:
Hi,
On 05/30/2013 04:34 PM, Ryan Wilkinson wrote:
> Yes, I can manually pass it through. Not necessarily looking to use this
> specific device (usb wifi adaptor) but was just handy. Here is the output:
>
Hmm, that should work.
I just noticed that in your last mail you mentioned that you've
virt-viewer installed
"double".
Can you try doing:
rpm -e --allmatches virt-viewer
yum install virt-viewer
And see if that fixes things ?
Regards,
Hans
> Bus 001 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU
> 802.11n WLAN Adapter
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x0bda Realtek Semiconductor Corp.
> idProduct 0x8172 RTL8191SU 802.11n WLAN Adapter
> bcdDevice 2.00
> iManufacturer 1 Manufacturer Realtek
> iProduct 2 RTL8191S WLAN Adapter
> iSerial 3 00e04c000001
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 46
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 4
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x04 EP 4 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x06 EP 6 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x0d EP 13 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
>
> Bus 005 Device 002: ID 2101:020f ActionStar
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x2101 ActionStar
> idProduct 0x020f
> bcdDevice 0.01
> iManufacturer 0
> iProduct 0
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 59
> bNumInterfaces 2
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 1 Boot Interface Subclass
> bInterfaceProtocol 1 Keyboard
> iInterface 0
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.01
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 63
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 10
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 1 Boot Interface Subclass
> bInterfaceProtocol 2 Mouse
> iInterface 0
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.01
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 72
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 10
> Device Status: 0x0002
> (Bus Powered)
> Remote Wakeup Enabled
>
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 3.06
> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 ehci_hcd
> iProduct 2 EHCI Host Controller
> iSerial 1 0000:00:1d.7
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 11
> bDescriptorType 41
> nNbrPorts 8
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00 0x00
> PortPwrCtrlMask 0xff 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Port 5: 0000.0100 power
> Port 6: 0000.0503 highspeed power enable connect
> Port 7: 0000.0100 power
> Port 8: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0001 1.1 root hub
> bcdDevice 3.06
> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd
> iProduct 2 UHCI Host Controller
> iSerial 1 0000:00:1d.0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0001 1.1 root hub
> bcdDevice 3.06
> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd
> iProduct 2 UHCI Host Controller
> iSerial 1 0000:00:1d.1
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0001 1.1 root hub
> bcdDevice 3.06
> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd
> iProduct 2 UHCI Host Controller
> iSerial 1 0000:00:1d.2
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0001 1.1 root hub
> bcdDevice 3.06
> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd
> iProduct 2 UHCI Host Controller
> iSerial 1 0000:00:1d.3
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0303 lowspeed power enable connect
> Device Status: 0x0001
> Self Powered
>
>
>
> On Thu, May 30, 2013 at 8:27 AM, Hans de Goede <hdegoede(a)redhat.com<mailto:
> hdegoede(a)redhat.com>> wrote:
>
> Hi,
>
>
> On 05/30/2013 04:17 PM, Ryan Wilkinson wrote:
>
> Hans,
>
> Thanks for the info. Remote viewer has keyboard focus when
> attempting usb pass-through. Just tried again to confirm. These are the
> two package versions I'm seeing that are installed:
>
> virt-viewer.x86_64 0.5.4-3.fc18
> virt-viewer.i686 0.5.3-1.fc17
>
>
> And you can pass the device through manually from the menu?
>
> Can you do lsusb -v with the device plugin and then copy and
> paste the output for the device in question into your next mail ?
>
> Regards,
>
> Hans
>
>
>