[ovirt-users] Ovirt Single Node Hyperconverged

Hi, I am looking at using Ovirt on a single machine. I used to use the all-in-one setup a while ago. I have only two vms and setting up two servers and a storage is out of my budget right now. The all in one solution sounds good, but I have some questions concerning the gdeploy config file. I am new to gluster and am unsure what I need. The server is ibm system x3550 m3 with two 1TB drives setup as a mirror. For these, what do I put if the disks are already setup as raid through the raid controller? Jbod [disktype] @RAIDTYPE@ #Possible values raid6, raid10, raid5, jbod [diskcount] @NUMBER_OF_DATA_DISKS@ #Ignored in case of jbod [stripesize] @STRIPE_SIZE@ #256 in case of jbod My second question is where do I get the Device name in the following: [script1] action=execute ignore_script_errors=no file=/usr/share/gdeploy/scripts/grafton-sanity-check.sh -d @DEVICE@ Is this the dev/sda on the disk or some other name. I was planning on using ovirt node as a staring point as that seems easier. Thanks in advance for the help.