Mike,
Tried the new ssh patch and the problem still there. Both options were used BOOTIF and
ssh_pwauth
When I logged in first time and changed pwd, any subsequent logins were rejected. Again I
couldn't capture the error message.
Tried to ssh into the node, but was rejected too:
[xxx oVirtNode]# ssh admin(a)192.168.36.114
The authenticity of host '192.168.36.114 (192.168.36.114)' can't be
established.
RSA key fingerprint is 23:6f:98:80:80:ec:d7:bb:e5:2a:02:59:93:85:38:39.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.36.114' (RSA) to the list of known hosts.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic).
Hmm, looks like something isn't right with ssh_pwauth then. I'll look
into that, but for now, try using rootpw instead of adminpw. Then login
as root. Once you're in as root, you can su - admin to go the the TUI
(or in this case, get the stack trace for why the TUI is failing).
Mike
- David
________________________________________
From: Mike Burns [mburns(a)redhat.com]
Sent: Friday, February 10, 2012 11:34 AM
To: Li, David
Cc: users(a)ovirt.org
Subject: RE: [Users] Pxeboot - pwd/login issue
On Fri, 2012-02-10 at 11:22 -0800, Li, David wrote:
> ok, I have already patched like this. Hope this is ok:
>
> [lid@FC16-1 ovirt-node]$ git fetch
http://gerrit.ovirt.org/p/ovirt-node
refs/changes/07/1807/1 && git checkout FETCH_HEAD
> remote: Counting objects: 57, done
> remote: Finding sources: 100% (39/39)
> remote: Total 39 (delta 28), reused 39 (delta 28)
> Unpacking objects: 100% (39/39), done.
> From
http://gerrit.ovirt.org/p/ovirt-node
> * branch refs/changes/07/1807/1 -> FETCH_HEAD
> Warning: you are leaving 1 commit behind, not connected to
> any of your branches:
>
> 07d8a0f Add archipel option with stateless boot
>
> If you want to keep them by creating a new branch, this may be a good time
> to do so with:
>
> git branch new_branch_name 07d8a0fc5007c5f74f9421b7a565cd2db2d9e772
>
> HEAD is now at a94c33c... fix ssh_pwauth handling in autoinstall
> [lid@FC16-1 ovirt-node]$ git fetch
http://gerrit.ovirt.org/p/ovirt-node
refs/changes/08/1808/1 && git checkout FETCH_HEAD
> remote: Counting objects: 62, done
> remote: Finding sources: 100% (44/44)
> remote: Total 44 (delta 32), reused 44 (delta 32)
> Unpacking objects: 100% (44/44), done.
> From
http://gerrit.ovirt.org/p/ovirt-node
> * branch refs/changes/08/1808/1 -> FETCH_HEAD
> Warning: you are leaving 5 commits behind, not connected to
> any of your branches:
>
> a94c33c fix ssh_pwauth handling in autoinstall
> 893a095 Add archipel option with stateless boot
> a1053cb regenerate repos.ks when building iso
> 237870c Add network configure before dropping into emergency shell
> 5bb3613 add error handling to recent rhn.py commit
>
> If you want to keep them by creating a new branch, this may be a good time
> to do so with:
>
> git branch new_branch_name a94c33c6d0957391a48ab0cd2e78e4a15e5ad80e
>
> HEAD is now at 3daa6d3... when stateless, don't execute store_config and
remove_config
> [lid@FC16-1 ovirt-node]$
I *think* you're ok, because I pushed the commits such that this last
command should get both. The way to check is to run
$ git log
and look at the commits in the log. You should see both the commits
"fix ssh_pwauth handling..." and "when stateless..." commits at the
top
of the log.
>
>
> ONE MORE QUESTION: do I need to run 'make publish' before make iso?
Yes, always rerun make publish. In general, I'd say rerun the
autogen.sh too, but in this case you're fine.
Mike
>
> - David
> ________________________________________
> From: Mike Burns [mburns(a)redhat.com]
> Sent: Friday, February 10, 2012 11:19 AM
> To: Li, David
> Cc: users(a)ovirt.org
> Subject: Re: [Users] Pxeboot - pwd/login issue
>
> On Fri, 2012-02-10 at 11:09 -0800, Li, David wrote:
> > Ok, what's the right cmd to get both? Do I have to start from scratch?
>
> No need to start from scratch.
>
> First, figure out the name of the remote.
> $ git remote show
> It will most likely return just one entry, and it's probably named
> origin. If it's something other than origin, then just substitute in
> the following commands:
>
> $ git fetch origin
> $ git reset --hard origin/master
> $ git fetch
http://gerrit.ovirt.org/p/ovirt-node refs/changes/07/1807/1 &&
git cherry-pick FETCH_HEAD
> $ git fetch
http://gerrit.ovirt.org/p/ovirt-node refs/changes/08/1808/1 &&
git cherry-pick FETCH_HEAD
>
> $ git status # should show something like:
> # On branch master
> # Your branch is ahead of 'origin/master' by 2 commits.
>
> Now you should be good to build.
>
> Mike
> >
> > >-----Original Message-----
> > >From: Mike Burns [mailto:mburns@redhat.com]
> > >Sent: Friday, February 10, 2012 11:01 AM
> > >To: Li, David
> > >Cc: users(a)ovirt.org
> > >Subject: Re: [Users] Pxeboot - pwd/login issue
> > >
> > >On Fri, 2012-02-10 at 10:49 -0800, Li, David wrote:
> > >> Mike,
> > >> I think I got a glimpse of the error message - something like
"persistent
> > >storage not available" after I tried to login with the new passwd.
> > >> Does this make sense?
> > >
> > >Try this patch with the other one I just sent:
> > >
> > >http://gerrit.ovirt.org/1808
> > >
> > >Mike
> > >>
> > >> David
> > >>
> > >>
> > >> >-----Original Message-----
> > >> >From: Mike Burns [mailto:mburns@redhat.com]
> > >> >Sent: Friday, February 10, 2012 7:37 AM
> > >> >To: Li, David
> > >> >Cc: users(a)ovirt.org
> > >> >Subject: RE: [Users] Pxeboot - pwd/login issue
> > >> >
> > >> >On Fri, 2012-02-10 at 07:17 -0800, Li, David wrote:
> > >> >> Hi Mike,
> > >> >>
> > >> >> I ran into the login/pwd problem again with this new build.
Kernel
> > >> >> option adminpw worked but only for a short time. I was asked
to
> > >> >> change pwd immediately after login but then rejected again
after I did
> > >that.
> > >> >> There was an short-lived error message on the screen but I
wasn't
> > >> >> able to capture it.
> > >> >
> > >> >You can try booting with "BOOTIF=eth0 ssh_pwauth=1" in
the command
> > >line.
> > >> >This will configure networking and enable SSH password
authentication.
> > >> >Then you can ssh admin@<your host> and it will show you the
error.
> > >> >
> > >> >>
> > >> >> I tried the latest from archipel source and it worked
without
> > >> >> password issue. I pulled it from:
> > >> >>
> > >> >> git clone
https://github.com/primalmotion/Archipel.git
> > >> >
> > >> >I'm using
git://github.com/primalmotion/Node.git
> > >> >
> > >> >The only differences I see between the 2 are some minor
formatting
> > >> >and conditional changes in recipe/Makefile.am and a couple
patches
> > >> >that were pushed since the github repo was updated. These
patches
> > >> >are all on the
gerrit.ovirt.org side.
> > >> >
> > >> >Note: there is an incompatible change that was merged into
master
> > >> >this morning. I'm working on a rebase of the archipel stuff
now to include
> > >it.
> > >> >
> > >> >Mike
> > >> >
> > >> >>
> > >> >> There might be a few updates right after you pulled it last
time.
> > >> >>
> > >> >> Would you mind merge the new updates into ovirt node again?
> > >> >>
> > >> >> Thanks.
> > >> >>
> > >> >> David
> > >> >>
> > >> >>
> > >> >> >-----Original Message-----
> > >> >> >From: Mike Burns [mailto:mburns@redhat.com]
> > >> >> >Sent: Thursday, February 09, 2012 5:10 PM
> > >> >> >To: Li, David
> > >> >> >Cc: Perry Myers; users(a)ovirt.org
> > >> >> >Subject: Re: [Users] Pxeboot
> > >> >> >
> > >> >> >On Thu, 2012-02-09 at 17:05 -0800, Li, David wrote:
> > >> >> >> Mike,
> > >> >> >> Built it finally!
> > >> >> >> Thanks a lot!
> > >> >> >
> > >> >> >Woot!
> > >> >> >
> > >> >> >>
> > >> >> >> >-----Original Message-----
> > >> >> >> >From: Mike Burns [mailto:mburns@redhat.com]
> > >> >> >> >Sent: Thursday, February 09, 2012 4:18 PM
> > >> >> >> >To: Li, David
> > >> >> >> >Cc: Perry Myers; users(a)ovirt.org
> > >> >> >> >Subject: Re: [Users] Pxeboot
> > >> >> >> >
> > >> >> >> >On Thu, 2012-02-09 at 15:50 -0800, Li, David
wrote:
> > >> >> >> >> MIke,
> > >> >> >> >>
> > >> >> >> >> Got something new this time in make
publish:
> > >> >> >> >>
> > >> >> >> >> /bin/sh: -c: line 36: syntax error near
unexpected token `)'
> > >> >> >> >> /bin/sh: -c: line 36: `)'
> > >> >> >> >> make[1]: *** [repos.ks] Error 1
> > >> >> >> >> make[1]: Leaving directory
> > >> >> >> >> `/home/lid/workspace/ovirt/node-archipel-
> > >> >> >> >2.2.2/ovirt-node/recipe'
> > >> >> >> >> make: *** [distdir] Error 1
> > >> >> >> >>
> > >> >> >> >> [lid@FC16-1 ovirt-node]$ echo
$OVIRT_CACHE_DIR
> > >> >> >$OVIRT_LOCAL_REPO
> > >> >> >> >> /home/lid/ovirt-cache
file:///home/lid/ovirt-cache/ovirt
> > >> >> >> >> [lid@FC16-1 ovirt-node]$
> > >> >> >> >
> > >> >> >> >Oops, bad merge on my part.
> > >> >> >> >
> > >> >> >> >$ git reset --hard origin/master #sets you back
to head of the
> > >> >> >> >master branch $ git fetch
http://gerrit.ovirt.org/p/ovirt-node
> > >> >> >> >refs/changes/38/1738/3 && git
cherry-pick FETCH_HEAD # checks
> > >> >> >> >out the
> > >> >> >new version of the patch set.
> > >> >> >> >
> > >> >> >> >Mike
> > >> >> >> >
> > >> >> >> >>
> > >> >> >> >>
> > >> >> >> >> - David
> > >> >> >> >> ________________________________________
> > >> >> >> >> From: Mike Burns [mburns(a)redhat.com]
> > >> >> >> >> Sent: Thursday, February 09, 2012 2:12 PM
> > >> >> >> >> To: Li, David
> > >> >> >> >> Cc: Perry Myers; users(a)ovirt.org
> > >> >> >> >> Subject: Re: [Users] Pxeboot
> > >> >> >> >>
> > >> >> >> >> On Thu, 2012-02-09 at 13:34 -0800, Li,
David wrote:
> > >> >> >> >> > Mike,
> > >> >> >> >> >
> > >> >> >> >> > It seems it needs couple vdsm pkgs:
> > >> >> >> >> >
> > >> >> >> >> > ./node-creator ovirt-node-image.ks
Error creating Live CD :
> > >> >> >> >> > Failed to find package
'vdsm-cli' : No
> > >> >> >> >> > package(s) available to install mv
ovirt-node-image.iso
> > >> >> >> >> >
ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
> > >> >> >> >> > mv: cannot stat
`ovirt-node-image.iso': No such file or
> > >> >> >> >> > directory
> > >> >> >> >> > make: *** [ovirt-node-image.iso] Error
1
> > >> >> >> >> >
> > >> >> >> >> >
> > >> >> >> >> > can I remove them from ks files?
> > >> >> >> >>
> > >> >> >> >> Not if you want to use ovirt-node with
ovirt-engine. There
> > >> >> >> >> was a bug in that patch set that is fixed
in patch set 2
> > >> >> >> >> (along with the bad ===== package). I
hadn't pulled the
> > >> >> >> >> patch set together and uploaded to gerrit
yet, but it's there now.
> > >> >> >> >>
> > >> >> >> >> git fetch
http://gerrit.ovirt.org/p/ovirt-node
> > >> >> >> >> refs/changes/38/1738/2 && git
checkout FETCH_HEAD
> > >> >> >> >>
> > >> >> >> >> This should fix the problem.
> > >> >> >> >>
> > >> >> >> >> Mike
> > >> >> >> >>
> > >> >> >> >> >
> > >> >> >> >> > - David
> > >> >> >> >> >
________________________________________
> > >> >> >> >> > From: Mike Burns [mburns(a)redhat.com]
> > >> >> >> >> > Sent: Thursday, February 09, 2012
12:07 PM
> > >> >> >> >> > To: Li, David
> > >> >> >> >> > Cc: Perry Myers; users(a)ovirt.org
> > >> >> >> >> > Subject: Re: [Users] Pxeboot
> > >> >> >> >> >
> > >> >> >> >> > On Thu, 2012-02-09 at 11:52 -0800, Li,
David wrote:
> > >> >> >> >> > > It's still the same error:
> > >> >> >> >> > >
> > >> >> >> >> > > [lid@FC16-1 ovirt-node]$ cd
recipe/
> > >> >> >> >> > > [lid@FC16-1 recipe]$ make
ovirt-node-image.iso ( \
> > >> >> >> >> > > echo
"PRODUCT='"oVirt Node Hypervisor"'" ;\
> > >> >> >> >> > > echo
"PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
> > >> >> >> >> > > echo
"PACKAGE=ovirt-node-image" ;\
> > >> >> >> >> > > echo
"VERSION=2.2.3" ;\
> > >> >> >> >> > > echo
"RELEASE=0.1fc16.git16688ea" ;\
> > >> >> >> >> > > ) > version.ks
> > >> >> >> >> > > ./node-creator
ovirt-node-image.ks Error creating Live CD :
> > >> >> >> >> > > Failed to find package
'=======' : No package(s)
> > >> >> >> >> > > available to install mv
ovirt-node-image.iso
> > >> >> >> >> > >
ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
> > >> >> >> >> > > mv: cannot stat
`ovirt-node-image.iso': No such file or
> > >> >> >> >> > > directory
> > >> >> >> >> > > make: *** [ovirt-node-image.iso]
Error 1
> > >> >> >> >> > > [lid@FC16-1 recipe]$ echo
$OVIRT_LOCAL_REPO
> > >> >> >> >> > >
file:///home/lid/ovirt-cache/ovirt
> > >> >> >> >> > > [lid@FC16-1 recipe]$ ll
/home/lid/ovirt-cache/ovirt/
> > >> >> >> >> > > total
> > >> >> >> >> > > 12 drwxr-xr-x. 2 lid lid 4096 Feb
9 11:10 noarch
> > >> >> >> >> > > drwxrwxr-x. 2 lid lid 4096 Feb 9
11:10 repodata drwxrwxr-x.
> > >> >> >> >> > > 2 lid lid 4096 Feb 9
> > >> >> >> >> > > 11:10 src
> > >> >> >> >> >
> > >> >> >> >> > That's a bug in the patch. edit
recipe/common-pkgs.ks and
> > >> >> >> >> > remove the last line which is
"======="
> > >> >> >> >> >
> > >> >> >> >> > Mike
> > >> >> >> >> > >
> > >> >> >> >> > >
> > >> >> >> >> > > Did make publish store the rpms
in $OVIRT_LOCAL_REPO?
> > >> >> >> >> > >
> > >> >> >> >> > > - David
> > >> >> >> >> > >
________________________________________
> > >> >> >> >> > > From: Mike Burns
[mburns(a)redhat.com]
> > >> >> >> >> > > Sent: Thursday, February 09, 2012
11:44 AM
> > >> >> >> >> > > To: Li, David
> > >> >> >> >> > > Cc: Perry Myers; users(a)ovirt.org
> > >> >> >> >> > > Subject: RE: [Users] Pxeboot
> > >> >> >> >> > >
> > >> >> >> >> > > On Thu, 2012-02-09 at 11:40
-0800, Li, David wrote:
> > >> >> >> >> > > > The error seems a little
stubborn.
> > >> >> >> >> > > >
> > >> >> >> >> > > > [lid@FC16-1 recipe]$ echo
$OVIRT_LOCAL_REPO
> > >> >> >> >> > > >
file://home/lid/ovirt-cache/ovirt
> > >> >> >> >> > >
> > >> >> >> >> > > You need 3 slashes.
file:///home/lid/ovirt-cache/ovirt
> > >> >> >> >> > >
> > >> >> >> >> > > > [lid@FC16-1 recipe]$ make
ovirt-node-image.iso ( \
> > >> >> >> >> > > > echo
"PRODUCT='"oVirt Node Hypervisor"'" ;\
> > >> >> >> >> > > > echo
"PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
> > >> >> >> >> > > > echo
"PACKAGE=ovirt-node-image" ;\
> > >> >> >> >> > > > echo
"VERSION=2.2.3" ;\
> > >> >> >> >> > > > echo
"RELEASE=0.1fc16.git16688ea" ;\
> > >> >> >> >> > > > ) > version.ks
> > >> >> >> >> > > > ./node-creator
ovirt-node-image.ks Error creating Live CD :
> > >> >> >> >> > > > Unable to download from repo
: Cannot retrieve
> > >> >> >> >> > > > repository metadata
(repomd.xml) for repository: local.
> > >> >> >> >> > > > Please verify its path and
try again mv
> > >> >> >> >> > > > ovirt-node-image.iso
> > >> >> >> >> > > >
ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
> > >> >> >> >> > > > mv: cannot stat
`ovirt-node-image.iso': No such file or
> > >> >> >> >> > > > directory
> > >> >> >> >> > > > make: ***
[ovirt-node-image.iso] Error 1
> > >> >> >> >> > > >
> > >> >> >> >> > > > There is also a pop-up
window: Unable to open a folder
> > >> >> >> >> > > > for _ovirt-node-imag
> > >> >> >> >> > > >
> > >> >> >> >> > > > maybe it's looking at
the wrong place?
> > >> >> >> >> > > >
> > >> >> >> >> > > >
> > >> >> >> >> > > > - David
> > >> >> >> >> > > >
________________________________________
> > >> >> >> >> > > > From: Mike Burns
[mburns(a)redhat.com]
> > >> >> >> >> > > > Sent: Thursday, February 09,
2012 11:15 AM
> > >> >> >> >> > > > To: Li, David
> > >> >> >> >> > > > Cc: Perry Myers;
users(a)ovirt.org
> > >> >> >> >> > > > Subject: RE: [Users]
Pxeboot
> > >> >> >> >> > > >
> > >> >> >> >> > > > On Thu, 2012-02-09 at 10:57
-0800, Li, David wrote:
> > >> >> >> >> > > > > ok, that's my
bad:)
> > >> >> >> >> > > > >
> > >> >> >> >> > > > > Ran into error at the
last iso build step:
> > >> >> >> >> > > > >
> > >> >> >> >> > > > > Start building ISO
image....
> > >> >> >> >> > > > > ( \
> > >> >> >> >> > > > > echo
"PRODUCT='"oVirt Node Hypervisor"'" ;\
> > >> >> >> >> > > > > echo
"PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
> > >> >> >> >> > > > > echo
"PACKAGE=ovirt-node-image" ;\
> > >> >> >> >> > > > > echo
"VERSION=2.2.3" ;\
> > >> >> >> >> > > > > echo
"RELEASE=0.1.fc16.git16688ea" ;\
> > >> >> >> >> > > > > ) > version.ks
> > >> >> >> >> > > > > ./node-creator
ovirt-node-image.ks Error creating Live CD :
> > >> >> >> >> > > > > Unable to download from
repo : Cannot retrieve
> > >> >> >> >> > > > > repository metadata
(repomd.xml) for repository: local.
> > >> >> >> >> > > > > Please verify its path
and try again mv
> > >> >> >> >> > > > > ovirt-node-image.iso
> > >> >> >> >> > > > >
ovirt-node-image-2.2.3-0.1.fc16.git16688ea.iso
> > >> >> >> >> > > > > mv: cannot stat
`ovirt-node-image.iso': No such file
> > >> >> >> >> > > > > or directory
> > >> >> >> >> > > > > make: ***
[ovirt-node-image.iso] Error 1
> > >> >> >> >> > > >
> > >> >> >> >> > > > IIRC, this is usually
because you have OVIRT_LOCAL_REPO
> > >> >> >> >> > > > defined, but not correctly.
It needs to be like this:
> > >> >> >> >> > > >
file:///home/mburns/rpmbuild/RPMS
> > >> >> >> >> > > >
> > >> >> >> >> > > > Ok, I just looked at the
Node Building page, and it
> > >> >> >> >> > > > needs some
> > >> >> >updates.
> > >> >> >> >> > > > Try this from the base
directory of the git repo
> > >> >> >> >> > > >
> > >> >> >> >> > > > $ export
OVIRT_CACHE_DIR=${HOME}/ovirt-cache
> > >> >> >> >> > > > $ export
> > >> >> >> >> > > >
OVIRT_LOCAL_REPO=file://${OVIRT_CACHE_DIR}/ovirt
> > >> >> >> >> > > > $ ./autogen.sh
--with-image-minimizer $ make publish
> > >> >> >> >> > > > #this builds the rpms and
puts them in
> > >> >> >> >> > > > ${OVIRT_CACHE_DIR} $ cd
recipe $ make
> > >> >> >> >> > > > ovirt-node-image.iso
> > >> >> >> >> > > >
> > >> >> >> >> > > > Mike
> > >> >> >> >> > > > >
> > >> >> >> >> > > > >
> > >> >> >> >> > > > >
> > >> >> >> >> > > > > I wonder which repo my
machine is lacking?
> > >> >> >> >> > > > >
> > >> >> >> >> > > > > - David
> > >> >> >> >> > > > >
________________________________________
> > >> >> >> >> > > > > From: Mike Burns
[mburns(a)redhat.com]
> > >> >> >> >> > > > > Sent: Thursday,
February 09, 2012 10:02 AM
> > >> >> >> >> > > > > To: Li, David
> > >> >> >> >> > > > > Cc: Perry Myers;
users(a)ovirt.org
> > >> >> >> >> > > > > Subject: Re: [Users]
Pxeboot
> > >> >> >> >> > > > >
> > >> >> >> >> > > > > On Thu, 2012-02-09 at
09:47 -0800, Li, David wrote:
> > >> >> >> >> > > > > > Got an error:
> > >> >> >> >> > > > > > [lid@FC16-1
ovirt-node]$ git fetch
> > >> >> >> >> > > > > >
http://gerrit.ovirt.org/
> > >> >> >> >> > > > > >
refs/changes/38/1738/1&&git cherry-pick FETCH_HEAD
> > >> >> >> >> > > > > > fatal:
http://gerrit.ovirt.org/info/refs not found:
> > >> >> >> >> > > > > > did you run git
> > >> >> >> >update-server-info on the server?
> > >> >> >> >> > > > >
> > >> >> >> >> > > > > Bad copy/paste:
> > >> >> >> >> > > > >
> > >> >> >> >> > > > > git fetch
http://gerrit.ovirt.org/p/ovirt-node
> > >> >> >> >> > > > > refs/changes/38/1738/1
&& git cherry-pick FETCH_HEAD
> > >> >> >> >> > > > > >
> > >> >> >> >> > > > > > any ideas?
> > >> >> >> >> > > > > >
> > >> >> >> >> > > > > > - David
> > >> >> >> >> > > > > >
________________________________________
> > >> >> >> >> > > > > > From: Mike Burns
[mburns(a)redhat.com]
> > >> >> >> >> > > > > > Sent: Thursday,
February 09, 2012 8:37 AM
> > >> >> >> >> > > > > > To: Li, David
> > >> >> >> >> > > > > > Cc: Perry Myers;
users(a)ovirt.org
> > >> >> >> >> > > > > > Subject: Re:
[Users] Pxeboot
> > >> >> >> >> > > > > >
> > >> >> >> >> > > > > > On Thu, 2012-02-09
at 08:30 -0800, Li, David wrote:
> > >> >> >> >> > > > > > > Mike,
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > > Two quick
questions before I kick off a build:
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > > 1. Git
errors. Do they matter?
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > > [lid@FC16-1
node-archipel-2.2.2]$ git clone
> > >> >> >> >> > > > > > >
http://gerrit.ovirt.org/p/ovirt-node.git
> > >> >> >> >refs/changes/38/1738/1&&git checkout
FETCH_HEAD Cloning into
> > >> >> >> >refs/changes/38/1738/1...
> > >> >> >> >> > > > > > > remote:
Counting objects: 14791, done
> > >> >> >> >> > > > > > > remote:
Finding sources: 100% (14791/14791)
> > >> >> >> >> > > > > > > remote: Total
14791 (delta 10855), reused 14778
> > >> >> >> >> > > > > > > (delta
> > >> >> >> >> > > > > > > 10855)
Receiving objects: 100% (14791/14791),
> > >> >> >> >> > > > > > > 16.92 MiB
> > >> >> >> >> > > > > > > | 154
> > >> >> >> >KiB/s, done.
> > >> >> >> >> > > > > > > Resolving
deltas: 100% (10855/10855), done.
> > >> >> >> >> > > > > > > fatal: Not a
git repository (or any of the parent
> > >> >> >> >> > > > > > > directories):
.git
> > >> >> >> >> > > > > >
> > >> >> >> >> > > > > > try this instead:
> > >> >> >> >> > > > > >
> > >> >> >> >> > > > > > git clone
http://gerrit.ovirt.org/p/ovirt-node.git
> > >> >> >> >> > > > > > cd ovirt-node
> > >> >> >> >> > > > > > git fetch
http://gerrit.ovirt.org/p/ovirt-node
> > >> >> >> >> > > > > >
refs/changes/38/1738/1 && git cherry-pick
> > >> >> >> >> > > > > > FETCH_HEAD
> > >> >> >> >> > > > > >
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > > 2. Build
machine.
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > > I am using a
x86_64 FC16 VM as the build machine.
> > >> >> >> >> > > > > > > My target is
> > >> >> >> >x86_64 Intel board. Is this ok?
> > >> >> >> >> > > > > >
> > >> >> >> >> > > > > > Should be fine.
> > >> >> >> >> > > > > >
> > >> >> >> >> > > > > > Mike
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > > - David
> > >> >> >> >> > > > > > >
________________________________________
> > >> >> >> >> > > > > > > From: Mike
Burns [mburns(a)redhat.com]
> > >> >> >> >> > > > > > > Sent:
Thursday, February 09, 2012 8:16 AM
> > >> >> >> >> > > > > > > To: Li,
David
> > >> >> >> >> > > > > > > Cc: Perry
Myers; users(a)ovirt.org
> > >> >> >> >> > > > > > > Subject: RE:
[Users] Pxeboot
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > > On Thu,
2012-02-09 at 08:10 -0800, Li, David wrote:
> > >> >> >> >> > > > > > > > Not sure
where the boot log is since I can't login.
> > >> >> >> >> > > > > > > >
> > >> >> >> >> > > > > > > > I got
the source from
> > >> >> >> >> > > > > > > >
https://github.com/primalmotion/archipel-node
> > >> >> >> >> > > > > > > > and
followed the build instructions in
> > >> >> >> >> > > > > > > >
http://ovirt.org/wiki/Node_Building
> > >> >> >> >> > > > > > > >
> > >> >> >> >> > > > > > > > maybe I
should rebuild the iso from the ovirt
> > >> >> >> >> > > > > > > > node
source tree
> > >> >> >> >as you have pulled in archipel changes
yesterday. How do I do that?
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > > git fetch
http://gerrit.ovirt.org/p/ovirt-node
> > >> >> >> >> > > > > > >
refs/changes/38/1738/1 && git checkout FETCH_HEAD
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > > That command
will checkout the current version of
> > >> >> >> >> > > > > > > the
archipel-node changes. Then you can just
> > >> >> >> >> > > > > > > follow the
Node_Building process. Note that the
> > >> >> >> >> > > > > > > changes
aren't merged into master yet. I'm still
> > >> >> >> >> > > > > > > in the
process of reviewing
> > >> >> >them.
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > > Mike
> > >> >> >> >> > > > > > > >
> > >> >> >> >> > > > > > > > - David
> > >> >> >> >> > > > > > > >
> > >> >> >> >> > > > > > > >
> > >> >> >> >> > > > > > > >
>-----Original Message-----
> > >> >> >> >> > > > > > > >
>From: Mike Burns [mailto:mburns@redhat.com]
> > >> >> >> >> > > > > > > >
>Sent: Thursday, February 09, 2012 7:22 AM
> > >> >> >> >> > > > > > > > >To:
Li, David
> > >> >> >> >> > > > > > > > >Cc:
Perry Myers; users(a)ovirt.org
> > >> >> >> >> > > > > > > >
>Subject: Re: [Users] Pxeboot
> > >> >> >> >> > > > > > > > >
> > >> >> >> >> > > > > > > > >On
Thu, 2012-02-09 at 07:06 -0800, Li, David wrote:
> > >> >> >> >> > > > > > > > >>
Mike,
> > >> >> >> >> > > > > > > >
>>
> > >> >> >> >> > > > > > > > >>
I added adminpw as a kernel option. After
> > >> >> >> >> > > > > > > > >>
boot, I tried
> > >> >> >> >"admin/abc123"
> > >> >> >> >> > > > > > > > >>
and "root/abc123" but not able to login.
> > >> >> >> >> > > > > > > > >>
Any idea?
> > >> >> >> >> > > > > > > >
>>
> > >> >> >> >> > > > > > > > >
> > >> >> >> >> > > > > > > > >Are
there any errors in your build or boot logs?
> > >> >> >> >> > > > > > > > >
> > >> >> >> >> > > > > > > >
>Mike
> > >> >> >> >> > > > > > > > >
> > >> >> >> >> > > > > > > > >>
David
> > >> >> >> >> > > > > > > >
>>
> > >> >> >> >> > > > > > > >
>>
> > >> >> >> >> > > > > > > > >>
>-----Original Message-----
> > >> >> >> >> > > > > > > > >>
>From: Mike Burns [mailto:mburns@redhat.com]
> > >> >> >> >> > > > > > > > >>
>Sent: Wednesday, February 08, 2012 6:53 PM
> > >> >> >> >> > > > > > > > >>
>To: Li, David
> > >> >> >> >> > > > > > > > >>
>Cc: Perry Myers; users(a)ovirt.org
> > >> >> >> >> > > > > > > > >>
>Subject: Re: [Users] Pxeboot
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > > >>
>On Wed, 2012-02-08 at 17:11 -0800, Li, David
> > >wrote:
> > >> >> >> >> > > > > > > > >>
>> Ok, I built an iso out of archipel and
> > >> >> >> >> > > > > > > > >>
>> pxebooted it with stateless option. Now
> > >> >> >> >> > > > > > > > >>
>I got a "localhost" login prompt. Any idea
> > >> >> >> >> > > > > > > > >>
>what should I put
> > >> >> >> >in as user/pwd?
> > >> >> >> >> > > > > > > > >>
>> David
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > > >>
>You will need to pass a password in on the
> > >> >> >> >> > > > > > > > >>
>command line as well
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > > >>
>adminpw=<hashed_password>
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > > >>
>You can generate the hashed password using:
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > > >>
>$ openssl passwd
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > > >>
>Assuming the password was abc123
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > > >>
>$ openssl passwd abc123
> > >> >> >> >> > > > > > > > >>
>tKrQfufCbosr6
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > > >>
>adminpw=tKrQfufCbosr6
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > > >>
>Mike
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > > >>
>>
> > >> >> >> >> > > > > > > > >>
>> >-----Original Message-----
> > >> >> >> >> > > > > > > > >>
>> >From: Mike Burns
> > >> >> >> >> > > > > > > > >>
>> >[mailto:mburns@redhat.com]
> > >> >> >> >> > > > > > > > >>
>> >Sent: Wednesday, February 08, 2012 4:31
> > >> >> >> >> > > > > > > > >>
>> >PM
> > >> >> >> >> > > > > > > > >>
>> >To: Li, David
> > >> >> >> >> > > > > > > > >>
>> >Cc: Perry Myers; users(a)ovirt.org
> > >> >> >> >> > > > > > > > >>
>> >Subject: RE: [Users] Pxeboot
> > >> >> >> >> > > > > > > > >>
>> >
> > >> >> >> >> > > > > > > > >>
>> >On Wed, 2012-02-08 at 15:43 -0800, Li,
> > >> >> >> >> > > > > > > > >>
>> >David
> > >> >wrote:
> > >> >> >> >> > > > > > > > >>
>> >> Ok, I think we are on the same page
> > >> >> >> >> > > > > > > > >>
>> >> now regarding
> > >> >> >> >stateless node.
> > >> >> >> >> > > > > > > > >>
>> >> It looks like the achipel diff you
> > >> >> >> >> > > > > > > > >>
>> >> just pulled in might be able to do
> > >> >> >> >> > > > > > > > >>
>> >> this. But I can't quite make it out
> > >> >> >> >> > > > > > > > >>
>> >> what the kernel option should
> > >> >> >> >> > > > > > > > >be.
> > >> >> >> >> > > > > > > > >>
>> >> Is it "stateless=1"?
> > >> >> >> >> > > > > > > > >>
>> >>
> > >> >> >> >> > > > > > > > >>
>> >
> > >> >> >> >> > > > > > > > >>
>> >stateless=1 or just stateless, both will work.
> > >> >> >> >> > > > > > > > >>
>> >
> > >> >> >> >> > > > > > > > >>
>> >
> > >> >> >> >> > > > > > > > >>
>> >> David
> > >> >> >> >> > > > > > > > >>
>> >>
> > >> >> >> >> > > > > > > > >>
>> >> >-----Original Message-----
> > >> >> >> >> > > > > > > > >>
>> >> >From: Mike Burns
> > >> >> >> >> > > > > > > > >>
>> >> >[mailto:mburns@redhat.com]
> > >> >> >> >> > > > > > > > >>
>> >> >Sent: Wednesday, February 08, 2012
> > >> >> >> >> > > > > > > > >>
>> >> >3:27 PM
> > >> >> >> >> > > > > > > > >>
>> >> >To: Li, David
> > >> >> >> >> > > > > > > > >>
>> >> >Cc: Perry Myers; users(a)ovirt.org
> > >> >> >> >> > > > > > > > >>
>> >> >Subject: Re: [Users] Pxeboot
> > >> >> >> >> > > > > > > > >>
>> >> >
> > >> >> >> >> > > > > > > > >>
>> >> >On Wed, 2012-02-08 at 15:19 -0800,
> > >> >> >> >> > > > > > > > >>
>> >> >Li, David
> > >> >> >wrote:
> > >> >> >> >> > > > > > > > >>
>> >> >> Perry,
> > >> >> >> >> > > > > > > > >>
>> >> >>
> > >> >> >> >> > > > > > > > >>
>> >> >> I am glad you brought this up.
> > >> >> >> >> > > > > > > > >>
>> >> >> I 'd be perfectly happy to run the
> > >> >> >> >> > > > > > > > >>
>> >> >> root fs entirely in
> > >> >> >> >RAM.
> > >> >> >> >> > > > > > > > >>
>> >> >> In fact that would
> > >> >> >> >> > > > > > > > >>
>> >> >be ideal for me. It's just I am not
> > >> >> >> >> > > > > > > > >>
>> >> >quite sure how to use pxeboot to achieve
> > >this.
> > >> >> >> >> > > > > > > > >>
>> >> >>
> > >> >> >> >> > > > > > > > >>
>> >> >> I am doing a test now using the
> > >> >> >> >> > > > > > > > >>
>> >> >> tftpboot files
> > >> >> >> >created from the iso.
> > >> >> >> >> > > > > > > > >>
>> >> >> As far as I see, the kernel boot
> > >> >> >> >> > > > > > > > >>
>> >> >> options
> > >> >> >> >(pxelinux.cfg/default) has:
> > >> >> >> >> > > > > > > > >>
>> >> >>
> > >> >> >> >> > > > > > > > >>
>> >> >> root=live:/ovirt-node-image-2.2.2-1.1.
> > >> >> >> >> > > > > > > > >>
>> >> >> fc1 6.i so
> > >> >> >> >> > > > > > > > >>
>> >> >>
> > >> >> >> >> > > > > > > > >>
>> >> >> With this I can only pxeboot to the
> > >> >> >> >> > > > > > > > >>
>> >> >> intall screen. What should I use
> > >> >> >> >> > > > > > > > >>
>> >> >> to let the
> > >> >> >> >> > > > > > > > >>
>> >> >kernel mount the root fs in memory?
> > >> >> >> >> > > > > > > > >>
>> >> >Something like
> > >> >> >> >> > > > > > > >
>root=/dev/ram0?
> > >> >> >> >> > > > > > > > >>
>> >> >>
> > >> >> >> >> > > > > > > > >>
>> >> >> David
> > >> >> >> >> > > > > > > > >>
>> >> >
> > >> >> >> >> > > > > > > > >>
>> >> >It's not currently possible with ovirt-node.
> > >> >> >> >> > > > > > > > >>
>> >> >That's the whole stateless feature
> > >> >> >> >> > > > > > > > >>
>> >> >that we outlined. Once we actually
> > >> >> >> >> > > > > > > > >>
>> >> >have it implemented, it will be
> > >> >> >> >> > > > > > > > >>
>> >> >something along the lines of adding
> > >> >> >> >> > > > > > > > >>
>> >> >"stateless" to
> > >> >> >> >> > > > > > > > >>
>> >the kernel commandline.
> > >> >> >> >> > > > > > > > >>
>> >> >
> > >> >> >> >> > > > > > > > >>
>> >> >Mike
> > >> >> >> >> > > > > > > > >>
>> >> >>
> > >> >> >> >> > > > > > > > >>
>> >> >>
> > >> >> >> >> > > > > > > > >>
>> >> >> >-----Original Message-----
> > >> >> >> >> > > > > > > > >>
>> >> >> >From: Perry Myers
> > >> >> >> >> > > > > > > > >>
>> >> >> >[mailto:pmyers@redhat.com]
> > >> >> >> >> > > > > > > > >>
>> >> >> >Sent: Wednesday, February 08, 2012
> > >> >> >> >> > > > > > > > >>
>> >> >> >2:54 PM
> > >> >> >> >> > > > > > > > >>
>> >> >> >To: Mike Burns
> > >> >> >> >> > > > > > > > >>
>> >> >> >Cc: Li, David; users(a)ovirt.org
> > >> >> >> >> > > > > > > > >>
>> >> >> >Subject: Re: [Users] Pxeboot
> > >> >> >> >> > > > > > > > >>
>> >> >> >
> > >> >> >> >> > > > > > > > >>
>> >> >> >On 02/08/2012 05:03 PM, Mike Burns
> > >wrote:
> > >> >> >> >> > > > > > > > >>
>> >> >> >> On Wed, 2012-02-08 at 13:46
> > >> >> >> >> > > > > > > > >>
>> >> >> >> -0800, Li, David
> > >> >> >> >wrote:
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> Mike,
> > >> >> >> >> > > > > > > > >>
>> >> >> >>>
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> If I understand this correctly,
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> today I should be able to
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> pxeboot and nfs mount the
> > >> >> >> >root fs from a remote server.
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> Apart from setting up the pxe
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> stuff, I 'd have to populate
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> the ovirt node root fs on the
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> server
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> - perhaps steal it from a disk install.
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> In other words I am concerned
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> about the point from which the
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> kernel starts to execute /init
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> script (in the initramfs) to
> > >> >> >> >> > > > > > > > >>
>> >> >> >>> the
> > >> >> >> >point /init is able to mount the final root fs
from a remote server.
> > >> >> >> >> > > > > > > > >>
>> >> >> >>
> > >> >> >> >> > > > > > > > >>
>> >> >> >> No, there is no way to set this
> > >> >> >> >> > > > > > > > >>
>> >> >> >> up currently in
> > >> >> >> >ovirt-node.
> > >> >> >> >> > > > > > > > >>
>> >> >> >> You could install using a remote
> > >> >> >> >> > > > > > > > >>
>> >> >> >> iscsi lun if you have a hardware
> > >> >> >> >> > > > > > > > >>
>> >> >> >> iscsi HBA, but there isn't a way
> > >> >> >> >> > > > > > > > >>
>> >> >> >> to mount a remote nfs share as
> > >> >> >> >> > > > > > > > >>
>> >> >> >> the
> > >> >> >> >> > > > > > > > >>
>> >root fs.
> > >> >> >> >> > > > > > > > >>
>> >> >> >>
> > >> >> >> >> > > > > > > > >>
>> >> >> >> Supporting a remote NFS share as
> > >> >> >> >> > > > > > > > >>
>> >> >> >> the root fs isn't even something
> > >> >> >> >> > > > > > > > >>
>> >> >> >> that requested as an RFE at this
> > >> >> >> >> > > > > > > > >>
>> >> >> >> point or on the roadmap as far
> > >> >> >> >> > > > > > > > >>
>> >> >> >> as
> > >> >> >> >I'm aware.
> > >> >> >> >> > > > > > > > >>
>> >> >> >>
> > >> >> >> >> > > > > > > > >>
>> >> >> >> It sounds like what you're
> > >> >> >> >> > > > > > > > >>
>> >> >> >> really looking for is a shared
> > >> >> >> >> > > > > > > > >>
>> >> >> >> root fs that multiple hosts could use.
> > >> >> >> >> > > > > > > > >>
>> >> >> >> This is something that we will
> > >> >> >> >> > > > > > > > >>
>> >> >> >> probably look into eventually,
> > >> >> >> >> > > > > > > > >>
>> >> >> >> but it's not on the immediate
> > >> >> >> >> > > > > > > > >>
>> >roadmap.
> > >> >> >> >> > > > > > > > >>
>> >> >> >
> > >> >> >> >> > > > > > > > >>
>> >> >> >Given that the rootfs of oVirt
> > >> >> >> >> > > > > > > > >>
>> >> >> >Node is fairly small and in a
> > >> >> >> >> > > > > > > > >>
>> >> >> >truly stateless environment would
> > >> >> >> >> > > > > > > > >>
>> >> >> >just run out of system RAM,
> > >> >> >> >> > > > > > > > >>
>> >> >> >there's no real reason to try to
> > >> >> >> >> > > > > > > > >>
>> >> >> >do a shared NFS based
> > >> >> >> >> > > > > > > >
>rootfs.
> > >> >> >> >> > > > > > > > >>
>> >> >> >It's an unnecessary complication I
> > >> >> >> >> > > > > > > > >>
>> >> >> >think, if the end goal is to move
> > >> >> >> >> > > > > > > > >>
>> >> >> >to truly
> > >> >> >> >> > > > > > > > >>
>> >> >stateless.
> > >> >> >> >> > > > > > > > >>
>> >> >> >
> > >> >> >> >> > > > > > > > >>
>> >> >> >For larger systems where the
> > >> >> >> >> > > > > > > > >>
>> >> >> >rootfs is on the order of GB's,
> > >> >> >> >> > > > > > > > >>
>> >> >> >shared root may make more
> > >> >> >> >sense.
> > >> >> >> >> > > > > > > > >>
>> >> >>
> > >> >> >> >____________________________________________
> > >> >> >> >> > > > > > > > >>
>> >> >> ___ Users mailing list
> > >> >> >> >> > > > > > > > >>
>> >> >> Users(a)ovirt.org
> > >> >> >> >> > > > > > > > >>
>> >> >>
http://lists.ovirt.org/mailman/list
> > >> >> >> >> > > > > > > > >>
>> >> >> inf o/u ser s
> > >> >> >> >> > > > > > > > >>
>> >> >
> > >> >> >> >> > > > > > > > >>
>> >>
> > >> >> >> >> > > > > > > > >>
>> >
> > >> >> >> >> > > > > > > > >>
>>
> > >> >> >> >> > > > > > > > >>
>>
> > >> >> >> >_______________________________________________
> > >> >> >> >> > > > > > > > >>
>> Users mailing list Users(a)ovirt.org
> > >> >> >> >> > > > > > > > >>
>>
http://lists.ovirt.org/mailman/listinfo/user
> > >> >> >> >> > > > > > > > >>
>> s
> > >> >> >> >> > > > > > > > >>
>
> > >> >> >> >> > > > > > > >
>>
> > >> >> >> >> > > > > > > >
>>
> > >> >> >> >_______________________________________________
> > >> >> >> >> > > > > > > > >>
Users mailing list Users(a)ovirt.org
> > >> >> >> >> > > > > > > > >>
http://lists.ovirt.org/mailman/listinfo/users
> > >> >> >> >> > > > > > > > >
> > >> >> >> >> > > > > > > >
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > >
> > >> >> >> >> > > > > > >
> > >> >_______________________________________________
> > >> >> >> >> > > > > > > Users mailing
list
> > >> >> >> >> > > > > > >
Users(a)ovirt.org
> > >> >> >> >> > > > > > >
http://lists.ovirt.org/mailman/listinfo/users
> > >> >> >> >> > > > > >
> > >> >> >> >> > > > > >
> > >> >> >> >> > > > > >
> > >> >_______________________________________________
> > >> >> >> >> > > > > > Users mailing
list
> > >> >> >> >> > > > > > Users(a)ovirt.org
> > >> >> >> >> > > > > >
http://lists.ovirt.org/mailman/listinfo/users
> > >> >> >> >> > > > >
> > >> >> >> >> > > > >
> > >> >> >> >> > > >
> > >> >> >> >> > > >
> > >> >> >> >> > >
> > >> >> >> >> > >
> > >> >> >> >> > >
_______________________________________________
> > >> >> >> >> > > Users mailing list
> > >> >> >> >> > > Users(a)ovirt.org
> > >> >> >> >> > >
http://lists.ovirt.org/mailman/listinfo/users
> > >> >> >> >> >
> > >> >> >> >> >
> > >> >> >> >> >
_______________________________________________
> > >> >> >> >> > Users mailing list
> > >> >> >> >> > Users(a)ovirt.org
> > >> >> >> >> >
http://lists.ovirt.org/mailman/listinfo/users
> > >> >> >> >>
> > >> >> >> >>
> > >> >> >> >>
_______________________________________________
> > >> >> >> >> Users mailing list
> > >> >> >> >> Users(a)ovirt.org
> > >> >> >> >>
http://lists.ovirt.org/mailman/listinfo/users
> > >> >> >> >
> > >> >> >>
> > >> >> >> _______________________________________________
> > >> >> >> Users mailing list
> > >> >> >> Users(a)ovirt.org
> > >> >> >>
http://lists.ovirt.org/mailman/listinfo/users
> > >> >> >
> > >> >>
> > >> >
> > >>
> > >> _______________________________________________
> > >> Users mailing list
> > >> Users(a)ovirt.org
> > >>
http://lists.ovirt.org/mailman/listinfo/users
> > >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> >
http://lists.ovirt.org/mailman/listinfo/users
>
>