don't need this one ^^. It's already in master.
git fetch
http://gerrit.ovirt.org/p/ovirt-node refs/changes/07/1807/1
&& git cherry-pick FETCH_HEAD
git fetch
http://gerrit.ovirt.org/p/ovirt-node refs/changes/08/1808/1 && git
cherry-pick FETCH_HEAD
David
>-----Original Message-----
>From: Mike Burns [mailto:mburns@redhat.com]
>Sent: Monday, February 13, 2012 5:56 AM
>To: Li, David
>Cc: users(a)ovirt.org
>Subject: RE: [Users] Pxeboot - pwd/login issue
>
>On Sat, 2012-02-11 at 07:39 -0800, Li, David wrote:
>> Mike,
>>
>> Tried the new ssh patch and the problem still there. Both options were
>> used BOOTIF and ssh_pwauth
>>
>> When I logged in first time and changed pwd, any subsequent logins were
>rejected. Again I couldn't capture the error message.
>>
>> Tried to ssh into the node, but was rejected too:
>>
>> [xxx oVirtNode]# ssh admin(a)192.168.36.114 The authenticity of host
>> '192.168.36.114 (192.168.36.114)' can't be established.
>> RSA key fingerprint is 23:6f:98:80:80:ec:d7:bb:e5:2a:02:59:93:85:38:39.
>> Are you sure you want to continue connecting (yes/no)? yes
>> Warning: Permanently added '192.168.36.114' (RSA) to the list of known
>hosts.
>> Permission denied (publickey,gssapi-keyex,gssapi-with-mic).
>
>Hmm, looks like something isn't right with ssh_pwauth then. I'll look into
that,
>but for now, try using rootpw instead of adminpw. Then login as root. Once
>you're in as root, you can su - admin to go the the TUI (or in this case, get
the
>stack trace for why the TUI is failing).
>
>Mike
>
>>
>>
>> - David
>> ________________________________________
>> From: Mike Burns [mburns(a)redhat.com]
>> Sent: Friday, February 10, 2012 11:34 AM
>> To: Li, David
>> Cc: users(a)ovirt.org
>> Subject: RE: [Users] Pxeboot - pwd/login issue
>>
>> On Fri, 2012-02-10 at 11:22 -0800, Li, David wrote:
>> > ok, I have already patched like this. Hope this is ok:
>> >
>> > [lid@FC16-1 ovirt-node]$ git fetch
>> >
http://gerrit.ovirt.org/p/ovirt-node refs/changes/07/1807/1 && git
>> > checkout FETCH_HEAD
>> > remote: Counting objects: 57, done
>> > remote: Finding sources: 100% (39/39)
>> > remote: Total 39 (delta 28), reused 39 (delta 28) Unpacking objects:
>> > 100% (39/39), done.
>> > From
http://gerrit.ovirt.org/p/ovirt-node
>> > * branch refs/changes/07/1807/1 -> FETCH_HEAD
>> > Warning: you are leaving 1 commit behind, not connected to any of
>> > your branches:
>> >
>> > 07d8a0f Add archipel option with stateless boot
>> >
>> > If you want to keep them by creating a new branch, this may be a
>> > good time to do so with:
>> >
>> > git branch new_branch_name
>07d8a0fc5007c5f74f9421b7a565cd2db2d9e772
>> >
>> > HEAD is now at a94c33c... fix ssh_pwauth handling in autoinstall
>> > [lid@FC16-1 ovirt-node]$ git fetch
>> >
http://gerrit.ovirt.org/p/ovirt-node refs/changes/08/1808/1 && git
>> > checkout FETCH_HEAD
>> > remote: Counting objects: 62, done
>> > remote: Finding sources: 100% (44/44)
>> > remote: Total 44 (delta 32), reused 44 (delta 32) Unpacking objects:
>> > 100% (44/44), done.
>> > From
http://gerrit.ovirt.org/p/ovirt-node
>> > * branch refs/changes/08/1808/1 -> FETCH_HEAD
>> > Warning: you are leaving 5 commits behind, not connected to any of
>> > your branches:
>> >
>> > a94c33c fix ssh_pwauth handling in autoinstall
>> > 893a095 Add archipel option with stateless boot
>> > a1053cb regenerate repos.ks when building iso
>> > 237870c Add network configure before dropping into emergency shell
>> > 5bb3613 add error handling to recent rhn.py commit
>> >
>> > If you want to keep them by creating a new branch, this may be a
>> > good time to do so with:
>> >
>> > git branch new_branch_name
>a94c33c6d0957391a48ab0cd2e78e4a15e5ad80e
>> >
>> > HEAD is now at 3daa6d3... when stateless, don't execute store_config
>> > and remove_config
>> > [lid@FC16-1 ovirt-node]$
>>
>> I *think* you're ok, because I pushed the commits such that this last
>> command should get both. The way to check is to run
>>
>> $ git log
>>
>> and look at the commits in the log. You should see both the commits
>> "fix ssh_pwauth handling..." and "when stateless..." commits
at the
>> top of the log.
>>
>> >
>> >
>> > ONE MORE QUESTION: do I need to run 'make publish' before make
iso?
>>
>> Yes, always rerun make publish. In general, I'd say rerun the
>> autogen.sh too, but in this case you're fine.
>>
>> Mike
>> >
>> > - David
>> > ________________________________________
>> > From: Mike Burns [mburns(a)redhat.com]
>> > Sent: Friday, February 10, 2012 11:19 AM
>> > To: Li, David
>> > Cc: users(a)ovirt.org
>> > Subject: Re: [Users] Pxeboot - pwd/login issue
>> >
>> > On Fri, 2012-02-10 at 11:09 -0800, Li, David wrote:
>> > > Ok, what's the right cmd to get both? Do I have to start from
scratch?
>> >
>> > No need to start from scratch.
>> >
>> > First, figure out the name of the remote.
>> > $ git remote show
>> > It will most likely return just one entry, and it's probably named
>> > origin. If it's something other than origin, then just substitute
>> > in the following commands:
>> >
>> > $ git fetch origin
>> > $ git reset --hard origin/master
>> > $ git fetch
http://gerrit.ovirt.org/p/ovirt-node
>> > refs/changes/07/1807/1 && git cherry-pick FETCH_HEAD $ git fetch
>> >
http://gerrit.ovirt.org/p/ovirt-node refs/changes/08/1808/1 && git
>> > cherry-pick FETCH_HEAD
>> >
>> > $ git status # should show something like:
>> > # On branch master
>> > # Your branch is ahead of 'origin/master' by 2 commits.
>> >
>> > Now you should be good to build.
>> >
>> > Mike
>> > >
>> > > >-----Original Message-----
>> > > >From: Mike Burns [mailto:mburns@redhat.com]
>> > > >Sent: Friday, February 10, 2012 11:01 AM
>> > > >To: Li, David
>> > > >Cc: users(a)ovirt.org
>> > > >Subject: Re: [Users] Pxeboot - pwd/login issue
>> > > >
>> > > >On Fri, 2012-02-10 at 10:49 -0800, Li, David wrote:
>> > > >> Mike,
>> > > >> I think I got a glimpse of the error message - something
like
>> > > >> "persistent
>> > > >storage not available" after I tried to login with the new
passwd.
>> > > >> Does this make sense?
>> > > >
>> > > >Try this patch with the other one I just sent:
>> > > >
>> > > >http://gerrit.ovirt.org/1808
>> > > >
>> > > >Mike
>> > > >>
>> > > >> David
>> > > >>
>> > > >>
>> > > >> >-----Original Message-----
>> > > >> >From: Mike Burns [mailto:mburns@redhat.com]
>> > > >> >Sent: Friday, February 10, 2012 7:37 AM
>> > > >> >To: Li, David
>> > > >> >Cc: users(a)ovirt.org
>> > > >> >Subject: RE: [Users] Pxeboot - pwd/login issue
>> > > >> >
>> > > >> >On Fri, 2012-02-10 at 07:17 -0800, Li, David wrote:
>> > > >> >> Hi Mike,
>> > > >> >>
>> > > >> >> I ran into the login/pwd problem again with this new
build.
>> > > >> >> Kernel option adminpw worked but only for a short
time. I
>> > > >> >> was asked to change pwd immediately after login but
then
>> > > >> >> rejected again after I did
>> > > >that.
>> > > >> >> There was an short-lived error message on the screen
but I
>> > > >> >> wasn't able to capture it.
>> > > >> >
>> > > >> >You can try booting with "BOOTIF=eth0
ssh_pwauth=1" in the
>> > > >> >command
>> > > >line.
>> > > >> >This will configure networking and enable SSH password
>authentication.
>> > > >> >Then you can ssh admin@<your host> and it will show
you the error.
>> > > >> >
>> > > >> >>
>> > > >> >> I tried the latest from archipel source and it
worked
>> > > >> >> without password issue. I pulled it from:
>> > > >> >>
>> > > >> >> git clone
https://github.com/primalmotion/Archipel.git
>> > > >> >
>> > > >> >I'm using
git://github.com/primalmotion/Node.git
>> > > >> >
>> > > >> >The only differences I see between the 2 are some minor
>> > > >> >formatting and conditional changes in recipe/Makefile.am
and a
>> > > >> >couple patches that were pushed since the github repo
was
>> > > >> >updated. These patches are all on the
gerrit.ovirt.org
side.
>> > > >> >
>> > > >> >Note: there is an incompatible change that was merged
into
>> > > >> >master this morning. I'm working on a rebase of the
archipel
>> > > >> >stuff now to include
>> > > >it.
>> > > >> >
>> > > >> >Mike
>> > > >> >
>> > > >> >>
>> > > >> >> There might be a few updates right after you pulled
it last time.
>> > > >> >>
>> > > >> >> Would you mind merge the new updates into ovirt node
again?
>> > > >> >>
>> > > >> >> Thanks.
>> > > >> >>
>> > > >> >> David
>> > > >> >>
>> > > >> >>
>> > > >> >> >-----Original Message-----
>> > > >> >> >From: Mike Burns [mailto:mburns@redhat.com]
>> > > >> >> >Sent: Thursday, February 09, 2012 5:10 PM
>> > > >> >> >To: Li, David
>> > > >> >> >Cc: Perry Myers; users(a)ovirt.org
>> > > >> >> >Subject: Re: [Users] Pxeboot
>> > > >> >> >
>> > > >> >> >On Thu, 2012-02-09 at 17:05 -0800, Li, David
wrote:
>> > > >> >> >> Mike,
>> > > >> >> >> Built it finally!
>> > > >> >> >> Thanks a lot!
>> > > >> >> >
>> > > >> >> >Woot!
>> > > >> >> >
>> > > >> >> >>
>> > > >> >> >> >-----Original Message-----
>> > > >> >> >> >From: Mike Burns
[mailto:mburns@redhat.com]
>> > > >> >> >> >Sent: Thursday, February 09, 2012 4:18
PM
>> > > >> >> >> >To: Li, David
>> > > >> >> >> >Cc: Perry Myers; users(a)ovirt.org
>> > > >> >> >> >Subject: Re: [Users] Pxeboot
>> > > >> >> >> >
>> > > >> >> >> >On Thu, 2012-02-09 at 15:50 -0800, Li,
David wrote:
>> > > >> >> >> >> MIke,
>> > > >> >> >> >>
>> > > >> >> >> >> Got something new this time in
make publish:
>> > > >> >> >> >>
>> > > >> >> >> >> /bin/sh: -c: line 36: syntax error
near unexpected token `)'
>> > > >> >> >> >> /bin/sh: -c: line 36: `)'
>> > > >> >> >> >> make[1]: *** [repos.ks] Error 1
>> > > >> >> >> >> make[1]: Leaving directory
>> > > >> >> >> >>
`/home/lid/workspace/ovirt/node-archipel-
>> > > >> >> >> >2.2.2/ovirt-node/recipe'
>> > > >> >> >> >> make: *** [distdir] Error 1
>> > > >> >> >> >>
>> > > >> >> >> >> [lid@FC16-1 ovirt-node]$ echo
$OVIRT_CACHE_DIR
>> > > >> >> >$OVIRT_LOCAL_REPO
>> > > >> >> >> >> /home/lid/ovirt-cache
>> > > >> >> >> >>
file:///home/lid/ovirt-cache/ovirt
>> > > >> >> >> >> [lid@FC16-1 ovirt-node]$
>> > > >> >> >> >
>> > > >> >> >> >Oops, bad merge on my part.
>> > > >> >> >> >
>> > > >> >> >> >$ git reset --hard origin/master #sets
you back to head
>> > > >> >> >> >of the master branch $ git fetch
>> > > >> >> >> >http://gerrit.ovirt.org/p/ovirt-node
>> > > >> >> >> >refs/changes/38/1738/3 && git
cherry-pick FETCH_HEAD #
>> > > >> >> >> >checks out the
>> > > >> >> >new version of the patch set.
>> > > >> >> >> >
>> > > >> >> >> >Mike
>> > > >> >> >> >
>> > > >> >> >> >>
>> > > >> >> >> >>
>> > > >> >> >> >> - David
>> > > >> >> >> >>
________________________________________
>> > > >> >> >> >> From: Mike Burns
[mburns(a)redhat.com]
>> > > >> >> >> >> Sent: Thursday, February 09, 2012
2:12 PM
>> > > >> >> >> >> To: Li, David
>> > > >> >> >> >> Cc: Perry Myers; users(a)ovirt.org
>> > > >> >> >> >> Subject: Re: [Users] Pxeboot
>> > > >> >> >> >>
>> > > >> >> >> >> On Thu, 2012-02-09 at 13:34 -0800,
Li, David wrote:
>> > > >> >> >> >> > Mike,
>> > > >> >> >> >> >
>> > > >> >> >> >> > It seems it needs couple vdsm
pkgs:
>> > > >> >> >> >> >
>> > > >> >> >> >> > ./node-creator
ovirt-node-image.ks Error creating Live CD :
>> > > >> >> >> >> > Failed to find package
'vdsm-cli' : No
>> > > >> >> >> >> > package(s) available to
install mv
>> > > >> >> >> >> > ovirt-node-image.iso
>> > > >> >> >> >> >
ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
>> > > >> >> >> >> > mv: cannot stat
`ovirt-node-image.iso': No such file
>> > > >> >> >> >> > or directory
>> > > >> >> >> >> > make: ***
[ovirt-node-image.iso] Error 1
>> > > >> >> >> >> >
>> > > >> >> >> >> >
>> > > >> >> >> >> > can I remove them from ks
files?
>> > > >> >> >> >>
>> > > >> >> >> >> Not if you want to use ovirt-node
with ovirt-engine.
>> > > >> >> >> >> There was a bug in that patch set
that is fixed in
>> > > >> >> >> >> patch set 2 (along with the bad
===== package). I
>> > > >> >> >> >> hadn't pulled the patch set
together and uploaded to gerrit
>yet, but it's there now.
>> > > >> >> >> >>
>> > > >> >> >> >> git fetch
http://gerrit.ovirt.org/p/ovirt-node
>> > > >> >> >> >> refs/changes/38/1738/2 &&
git checkout FETCH_HEAD
>> > > >> >> >> >>
>> > > >> >> >> >> This should fix the problem.
>> > > >> >> >> >>
>> > > >> >> >> >> Mike
>> > > >> >> >> >>
>> > > >> >> >> >> >
>> > > >> >> >> >> > - David
>> > > >> >> >> >> >
________________________________________
>> > > >> >> >> >> > From: Mike Burns
[mburns(a)redhat.com]
>> > > >> >> >> >> > Sent: Thursday, February 09,
2012 12:07 PM
>> > > >> >> >> >> > To: Li, David
>> > > >> >> >> >> > Cc: Perry Myers;
users(a)ovirt.org
>> > > >> >> >> >> > Subject: Re: [Users] Pxeboot
>> > > >> >> >> >> >
>> > > >> >> >> >> > On Thu, 2012-02-09 at 11:52
-0800, Li, David wrote:
>> > > >> >> >> >> > > It's still the same
error:
>> > > >> >> >> >> > >
>> > > >> >> >> >> > > [lid@FC16-1 ovirt-node]$
cd recipe/
>> > > >> >> >> >> > > [lid@FC16-1 recipe]$
make ovirt-node-image.iso ( \
>> > > >> >> >> >> > > echo
"PRODUCT='"oVirt Node Hypervisor"'" ;\
>> > > >> >> >> >> > > echo
"PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
>> > > >> >> >> >> > > echo
"PACKAGE=ovirt-node-image" ;\
>> > > >> >> >> >> > > echo
"VERSION=2.2.3" ;\
>> > > >> >> >> >> > > echo
"RELEASE=0.1fc16.git16688ea" ;\
>> > > >> >> >> >> > > ) > version.ks
>> > > >> >> >> >> > > ./node-creator
ovirt-node-image.ks Error creating Live
>CD :
>> > > >> >> >> >> > > Failed to find package
'=======' : No package(s)
>> > > >> >> >> >> > > available to install mv
ovirt-node-image.iso
>> > > >> >> >> >> > >
ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
>> > > >> >> >> >> > > mv: cannot stat
`ovirt-node-image.iso': No such
>> > > >> >> >> >> > > file or directory
>> > > >> >> >> >> > > make: ***
[ovirt-node-image.iso] Error 1
>> > > >> >> >> >> > > [lid@FC16-1 recipe]$
echo $OVIRT_LOCAL_REPO
>> > > >> >> >> >> > >
file:///home/lid/ovirt-cache/ovirt
>> > > >> >> >> >> > > [lid@FC16-1 recipe]$ ll
>> > > >> >> >> >> > >
/home/lid/ovirt-cache/ovirt/ total
>> > > >> >> >> >> > > 12 drwxr-xr-x. 2 lid lid
4096 Feb 9 11:10 noarch
>> > > >> >> >> >> > > drwxrwxr-x. 2 lid lid
4096 Feb 9 11:10 repodata
>drwxrwxr-x.
>> > > >> >> >> >> > > 2 lid lid 4096 Feb 9
>> > > >> >> >> >> > > 11:10 src
>> > > >> >> >> >> >
>> > > >> >> >> >> > That's a bug in the
patch. edit
>> > > >> >> >> >> > recipe/common-pkgs.ks and
remove the last line which is
>"======="
>> > > >> >> >> >> >
>> > > >> >> >> >> > Mike
>> > > >> >> >> >> > >
>> > > >> >> >> >> > >
>> > > >> >> >> >> > > Did make publish store
the rpms in
>$OVIRT_LOCAL_REPO?
>> > > >> >> >> >> > >
>> > > >> >> >> >> > > - David
>> > > >> >> >> >> > >
________________________________________
>> > > >> >> >> >> > > From: Mike Burns
[mburns(a)redhat.com]
>> > > >> >> >> >> > > Sent: Thursday, February
09, 2012 11:44 AM
>> > > >> >> >> >> > > To: Li, David
>> > > >> >> >> >> > > Cc: Perry Myers;
users(a)ovirt.org
>> > > >> >> >> >> > > Subject: RE: [Users]
Pxeboot
>> > > >> >> >> >> > >
>> > > >> >> >> >> > > On Thu, 2012-02-09 at
11:40 -0800, Li, David wrote:
>> > > >> >> >> >> > > > The error seems a
little stubborn.
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > > [lid@FC16-1
recipe]$ echo $OVIRT_LOCAL_REPO
>> > > >> >> >> >> > > >
file://home/lid/ovirt-cache/ovirt
>> > > >> >> >> >> > >
>> > > >> >> >> >> > > You need 3 slashes.
>> > > >> >> >> >> > >
file:///home/lid/ovirt-cache/ovirt
>> > > >> >> >> >> > >
>> > > >> >> >> >> > > > [lid@FC16-1
recipe]$ make ovirt-node-image.iso ( \
>> > > >> >> >> >> > > > echo
"PRODUCT='"oVirt Node Hypervisor"'" ;\
>> > > >> >> >> >> > > > echo
"PRODUCT_SHORT='"oVirt Node
>Hypervisor"'" ;\
>> > > >> >> >> >> > > > echo
"PACKAGE=ovirt-node-image" ;\
>> > > >> >> >> >> > > > echo
"VERSION=2.2.3" ;\
>> > > >> >> >> >> > > > echo
"RELEASE=0.1fc16.git16688ea" ;\
>> > > >> >> >> >> > > > ) > version.ks
>> > > >> >> >> >> > > > ./node-creator
ovirt-node-image.ks Error creating Live
>CD :
>> > > >> >> >> >> > > > Unable to download
from repo : Cannot retrieve
>> > > >> >> >> >> > > > repository metadata
(repomd.xml) for repository: local.
>> > > >> >> >> >> > > > Please verify its
path and try again mv
>> > > >> >> >> >> > > >
ovirt-node-image.iso
>> > > >> >> >> >> > > >
ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
>> > > >> >> >> >> > > > mv: cannot stat
`ovirt-node-image.iso': No such
>> > > >> >> >> >> > > > file or directory
>> > > >> >> >> >> > > > make: ***
[ovirt-node-image.iso] Error 1
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > > There is also a
pop-up window: Unable to open a
>> > > >> >> >> >> > > > folder for
_ovirt-node-imag
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > > maybe it's
looking at the wrong place?
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > > - David
>> > > >> >> >> >> > > >
________________________________________
>> > > >> >> >> >> > > > From: Mike Burns
[mburns(a)redhat.com]
>> > > >> >> >> >> > > > Sent: Thursday,
February 09, 2012 11:15 AM
>> > > >> >> >> >> > > > To: Li, David
>> > > >> >> >> >> > > > Cc: Perry Myers;
users(a)ovirt.org
>> > > >> >> >> >> > > > Subject: RE:
[Users] Pxeboot
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > > On Thu, 2012-02-09
at 10:57 -0800, Li, David wrote:
>> > > >> >> >> >> > > > > ok, that's
my bad:)
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > > > Ran into error
at the last iso build step:
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > > > Start building
ISO image....
>> > > >> >> >> >> > > > > ( \
>> > > >> >> >> >> > > > > echo
"PRODUCT='"oVirt Node Hypervisor"'" ;\
>> > > >> >> >> >> > > > > echo
"PRODUCT_SHORT='"oVirt Node
>Hypervisor"'" ;\
>> > > >> >> >> >> > > > > echo
"PACKAGE=ovirt-node-image" ;\
>> > > >> >> >> >> > > > > echo
"VERSION=2.2.3" ;\
>> > > >> >> >> >> > > > > echo
"RELEASE=0.1.fc16.git16688ea" ;\
>> > > >> >> >> >> > > > > ) >
version.ks ./node-creator
>> > > >> >> >> >> > > > >
ovirt-node-image.ks Error creating Live CD :
>> > > >> >> >> >> > > > > Unable to
download from repo : Cannot retrieve
>> > > >> >> >> >> > > > > repository
metadata (repomd.xml) for repository:
>local.
>> > > >> >> >> >> > > > > Please verify
its path and try again mv
>> > > >> >> >> >> > > > >
ovirt-node-image.iso
>> > > >> >> >> >> > > > >
ovirt-node-image-2.2.3-0.1.fc16.git16688ea.iso
>> > > >> >> >> >> > > > > mv: cannot
stat `ovirt-node-image.iso': No
>> > > >> >> >> >> > > > > such file or
directory
>> > > >> >> >> >> > > > > make: ***
[ovirt-node-image.iso] Error 1
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > > IIRC, this is
usually because you have
>> > > >> >> >> >> > > > OVIRT_LOCAL_REPO
defined, but not correctly. It
>needs to be like this:
>> > > >> >> >> >> > > >
file:///home/mburns/rpmbuild/RPMS
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > > Ok, I just looked
at the Node Building page, and
>> > > >> >> >> >> > > > it needs some
>> > > >> >> >updates.
>> > > >> >> >> >> > > > Try this from the
base directory of the git repo
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > > $ export
OVIRT_CACHE_DIR=${HOME}/ovirt-cache
>> > > >> >> >> >> > > > $ export
>> > > >> >> >> >> > > >
>OVIRT_LOCAL_REPO=file://${OVIRT_CACHE_DIR}/ovirt
>> > > >> >> >> >> > > > $ ./autogen.sh
--with-image-minimizer $ make
>> > > >> >> >> >> > > > publish #this
builds the rpms and puts them in
>> > > >> >> >> >> > > > ${OVIRT_CACHE_DIR}
$ cd recipe $ make
>> > > >> >> >> >> > > >
ovirt-node-image.iso
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > > Mike
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > > > I wonder which
repo my machine is lacking?
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > > > - David
>> > > >> >> >> >> > > > >
________________________________________
>> > > >> >> >> >> > > > > From: Mike
Burns [mburns(a)redhat.com]
>> > > >> >> >> >> > > > > Sent:
Thursday, February 09, 2012 10:02 AM
>> > > >> >> >> >> > > > > To: Li, David
>> > > >> >> >> >> > > > > Cc: Perry
Myers; users(a)ovirt.org
>> > > >> >> >> >> > > > > Subject: Re:
[Users] Pxeboot
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > > > On Thu,
2012-02-09 at 09:47 -0800, Li, David wrote:
>> > > >> >> >> >> > > > > > Got an
error:
>> > > >> >> >> >> > > > > >
[lid@FC16-1 ovirt-node]$ git fetch
>> > > >> >> >> >> > > > > >
http://gerrit.ovirt.org/
>> > > >> >> >> >> > > > > >
refs/changes/38/1738/1&&git cherry-pick
>> > > >> >> >> >> > > > > >
FETCH_HEAD
>> > > >> >> >> >> > > > > > fatal:
http://gerrit.ovirt.org/info/refs not found:
>> > > >> >> >> >> > > > > > did you
run git
>> > > >> >> >> >update-server-info on the server?
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > > > Bad
copy/paste:
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > > > git fetch
http://gerrit.ovirt.org/p/ovirt-node
>> > > >> >> >> >> > > > >
refs/changes/38/1738/1 && git cherry-pick
>> > > >> >> >> >> > > > > FETCH_HEAD
>> > > >> >> >> >> > > > > >
>> > > >> >> >> >> > > > > > any
ideas?
>> > > >> >> >> >> > > > > >
>> > > >> >> >> >> > > > > > - David
>> > > >> >> >> >> > > > > >
>________________________________________
>> > > >> >> >> >> > > > > > From:
Mike Burns [mburns(a)redhat.com]
>> > > >> >> >> >> > > > > > Sent:
Thursday, February 09, 2012 8:37 AM
>> > > >> >> >> >> > > > > > To: Li,
David
>> > > >> >> >> >> > > > > > Cc: Perry
Myers; users(a)ovirt.org
>> > > >> >> >> >> > > > > > Subject:
Re: [Users] Pxeboot
>> > > >> >> >> >> > > > > >
>> > > >> >> >> >> > > > > > On Thu,
2012-02-09 at 08:30 -0800, Li, David wrote:
>> > > >> >> >> >> > > > > > >
Mike,
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > > Two
quick questions before I kick off a build:
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > > 1.
Git errors. Do they matter?
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > >
[lid@FC16-1 node-archipel-2.2.2]$ git
>> > > >> >> >> >> > > > > > >
clone
>> > > >> >> >> >> > > > > > >
http://gerrit.ovirt.org/p/ovirt-node.git
>> > > >> >> >> >refs/changes/38/1738/1&&git
checkout FETCH_HEAD Cloning
>> > > >> >> >> >into refs/changes/38/1738/1...
>> > > >> >> >> >> > > > > > >
remote: Counting objects: 14791, done
>> > > >> >> >> >> > > > > > >
remote: Finding sources: 100%
>> > > >> >> >> >> > > > > > >
(14791/14791)
>> > > >> >> >> >> > > > > > >
remote: Total 14791 (delta 10855), reused
>> > > >> >> >> >> > > > > > >
14778 (delta
>> > > >> >> >> >> > > > > > >
10855) Receiving objects: 100%
>> > > >> >> >> >> > > > > > >
(14791/14791),
>> > > >> >> >> >> > > > > > >
16.92 MiB
>> > > >> >> >> >> > > > > > > |
154
>> > > >> >> >> >KiB/s, done.
>> > > >> >> >> >> > > > > > >
Resolving deltas: 100% (10855/10855), done.
>> > > >> >> >> >> > > > > > >
fatal: Not a git repository (or any of the
>> > > >> >> >> >> > > > > > >
parent
>> > > >> >> >> >> > > > > > >
directories): .git
>> > > >> >> >> >> > > > > >
>> > > >> >> >> >> > > > > > try this
instead:
>> > > >> >> >> >> > > > > >
>> > > >> >> >> >> > > > > > git
clone
>> > > >> >> >> >> > > > > >
http://gerrit.ovirt.org/p/ovirt-node.git
>> > > >> >> >> >> > > > > > cd
ovirt-node git fetch
>> > > >> >> >> >> > > > > >
http://gerrit.ovirt.org/p/ovirt-node
>> > > >> >> >> >> > > > > >
refs/changes/38/1738/1 && git cherry-pick
>> > > >> >> >> >> > > > > >
FETCH_HEAD
>> > > >> >> >> >> > > > > >
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > > 2.
Build machine.
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > > I am
using a x86_64 FC16 VM as the build
>machine.
>> > > >> >> >> >> > > > > > > My
target is
>> > > >> >> >> >x86_64 Intel board. Is this ok?
>> > > >> >> >> >> > > > > >
>> > > >> >> >> >> > > > > > Should be
fine.
>> > > >> >> >> >> > > > > >
>> > > >> >> >> >> > > > > > Mike
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > > -
David
>> > > >> >> >> >> > > > > > >
>________________________________________
>> > > >> >> >> >> > > > > > >
From: Mike Burns [mburns(a)redhat.com]
>> > > >> >> >> >> > > > > > >
Sent: Thursday, February 09, 2012 8:16 AM
>> > > >> >> >> >> > > > > > > To:
Li, David
>> > > >> >> >> >> > > > > > > Cc:
Perry Myers; users(a)ovirt.org
>> > > >> >> >> >> > > > > > >
Subject: RE: [Users] Pxeboot
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > > On
Thu, 2012-02-09 at 08:10 -0800, Li, David wrote:
>> > > >> >> >> >> > > > > > > >
Not sure where the boot log is since I can't login.
>> > > >> >> >> >> > > > > > >
>
>> > > >> >> >> >> > > > > > > >
I got the source from
>> > > >> >> >> >> > > > > > > >
https://github.com/primalmotion/archipel
>> > > >> >> >> >> > > > > > > >
-node and followed the build
>> > > >> >> >> >> > > > > > > >
instructions in
>> > > >> >> >> >> > > > > > > >
http://ovirt.org/wiki/Node_Building
>> > > >> >> >> >> > > > > > >
>
>> > > >> >> >> >> > > > > > > >
maybe I should rebuild the iso from the
>> > > >> >> >> >> > > > > > > >
ovirt node source tree
>> > > >> >> >> >as you have pulled in archipel changes
yesterday. How do I do
>that?
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > > git
fetch
>> > > >> >> >> >> > > > > > >
http://gerrit.ovirt.org/p/ovirt-node
>> > > >> >> >> >> > > > > > >
refs/changes/38/1738/1 && git checkout
>> > > >> >> >> >> > > > > > >
FETCH_HEAD
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > > That
command will checkout the current
>> > > >> >> >> >> > > > > > >
version of the archipel-node changes.
>> > > >> >> >> >> > > > > > > Then
you can just follow the Node_Building
>> > > >> >> >> >> > > > > > >
process. Note that the changes aren't
>> > > >> >> >> >> > > > > > >
merged into master yet. I'm still in the
>> > > >> >> >> >> > > > > > >
process of reviewing
>> > > >> >> >them.
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > >
Mike
>> > > >> >> >> >> > > > > > >
>
>> > > >> >> >> >> > > > > > > >
- David
>> > > >> >> >> >> > > > > > >
>
>> > > >> >> >> >> > > > > > >
>
>> > > >> >> >> >> > > > > > > >
>-----Original Message-----
>> > > >> >> >> >> > > > > > > >
>From: Mike Burns
>> > > >> >> >> >> > > > > > > >
>[mailto:mburns@redhat.com]
>> > > >> >> >> >> > > > > > > >
>Sent: Thursday, February 09, 2012 7:22
>> > > >> >> >> >> > > > > > > >
>AM
>> > > >> >> >> >> > > > > > > >
>To: Li, David
>> > > >> >> >> >> > > > > > > >
>Cc: Perry Myers; users(a)ovirt.org
>> > > >> >> >> >> > > > > > > >
>Subject: Re: [Users] Pxeboot
>> > > >> >> >> >> > > > > > > >
>
>> > > >> >> >> >> > > > > > > >
>On Thu, 2012-02-09 at 07:06 -0800, Li, David
>wrote:
>> > > >> >> >> >> > > > > > > >
>> Mike,
>> > > >> >> >> >> > > > > > > >
>>
>> > > >> >> >> >> > > > > > > >
>> I added adminpw as a kernel option.
>> > > >> >> >> >> > > > > > > >
>> After boot, I tried
>> > > >> >> >> >"admin/abc123"
>> > > >> >> >> >> > > > > > > >
>> and "root/abc123" but not able to login.
>> > > >> >> >> >> > > > > > > >
>> Any idea?
>> > > >> >> >> >> > > > > > > >
>>
>> > > >> >> >> >> > > > > > > >
>
>> > > >> >> >> >> > > > > > > >
>Are there any errors in your build or boot logs?
>> > > >> >> >> >> > > > > > > >
>
>> > > >> >> >> >> > > > > > > >
>Mike
>> > > >> >> >> >> > > > > > > >
>
>> > > >> >> >> >> > > > > > > >
>> David
>> > > >> >> >> >> > > > > > > >
>>
>> > > >> >> >> >> > > > > > > >
>>
>> > > >> >> >> >> > > > > > > >
>> >-----Original Message-----
>> > > >> >> >> >> > > > > > > >
>> >From: Mike Burns
>> > > >> >> >> >> > > > > > > >
>> >[mailto:mburns@redhat.com]
>> > > >> >> >> >> > > > > > > >
>> >Sent: Wednesday, February 08, 2012
>> > > >> >> >> >> > > > > > > >
>> >6:53 PM
>> > > >> >> >> >> > > > > > > >
>> >To: Li, David
>> > > >> >> >> >> > > > > > > >
>> >Cc: Perry Myers; users(a)ovirt.org
>> > > >> >> >> >> > > > > > > >
>> >Subject: Re: [Users] Pxeboot
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>> >On Wed, 2012-02-08 at 17:11 -0800,
>> > > >> >> >> >> > > > > > > >
>> >Li, David
>> > > >wrote:
>> > > >> >> >> >> > > > > > > >
>> >> Ok, I built an iso out of archipel
>> > > >> >> >> >> > > > > > > >
>> >> and pxebooted it with stateless
>> > > >> >> >> >> > > > > > > >
>> >> option. Now
>> > > >> >> >> >> > > > > > > >
>> >I got a "localhost" login prompt.
>> > > >> >> >> >> > > > > > > >
>> >Any idea what should I put
>> > > >> >> >> >in as user/pwd?
>> > > >> >> >> >> > > > > > > >
>> >> David
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>> >You will need to pass a password in
>> > > >> >> >> >> > > > > > > >
>> >on the command line as well
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>> >adminpw=<hashed_password>
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>> >You can generate the hashed password
>using:
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>> >$ openssl passwd
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>> >Assuming the password was abc123
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>> >$ openssl passwd abc123
>> > > >> >> >> >> > > > > > > >
>> >tKrQfufCbosr6
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>> >adminpw=tKrQfufCbosr6
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>> >Mike
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>> >>
>> > > >> >> >> >> > > > > > > >
>> >> >-----Original Message-----
>> > > >> >> >> >> > > > > > > >
>> >> >From: Mike Burns
>> > > >> >> >> >> > > > > > > >
>> >> >[mailto:mburns@redhat.com]
>> > > >> >> >> >> > > > > > > >
>> >> >Sent: Wednesday, February 08,
>> > > >> >> >> >> > > > > > > >
>> >> >2012 4:31 PM
>> > > >> >> >> >> > > > > > > >
>> >> >To: Li, David
>> > > >> >> >> >> > > > > > > >
>> >> >Cc: Perry Myers; users(a)ovirt.org
>> > > >> >> >> >> > > > > > > >
>> >> >Subject: RE: [Users] Pxeboot
>> > > >> >> >> >> > > > > > > >
>> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >On Wed, 2012-02-08 at 15:43
>> > > >> >> >> >> > > > > > > >
>> >> >-0800, Li, David
>> > > >> >wrote:
>> > > >> >> >> >> > > > > > > >
>> >> >> Ok, I think we are on the same
>> > > >> >> >> >> > > > > > > >
>> >> >> page now regarding
>> > > >> >> >> >stateless node.
>> > > >> >> >> >> > > > > > > >
>> >> >> It looks like the achipel diff
>> > > >> >> >> >> > > > > > > >
>> >> >> you just pulled in might be
>> > > >> >> >> >> > > > > > > >
>> >> >> able to do this. But I can't
>> > > >> >> >> >> > > > > > > >
>> >> >> quite make it out what the
>> > > >> >> >> >> > > > > > > >
>> >> >> kernel option should
>> > > >> >> >> >> > > > > > > >
>be.
>> > > >> >> >> >> > > > > > > >
>> >> >> Is it "stateless=1"?
>> > > >> >> >> >> > > > > > > >
>> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >stateless=1 or just stateless, both will
>work.
>> > > >> >> >> >> > > > > > > >
>> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >> David
>> > > >> >> >> >> > > > > > > >
>> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >-----Original Message-----
>> > > >> >> >> >> > > > > > > >
>> >> >> >From: Mike Burns
>> > > >> >> >> >> > > > > > > >
>> >> >> >[mailto:mburns@redhat.com]
>> > > >> >> >> >> > > > > > > >
>> >> >> >Sent: Wednesday, February 08,
>> > > >> >> >> >> > > > > > > >
>> >> >> >2012
>> > > >> >> >> >> > > > > > > >
>> >> >> >3:27 PM
>> > > >> >> >> >> > > > > > > >
>> >> >> >To: Li, David
>> > > >> >> >> >> > > > > > > >
>> >> >> >Cc: Perry Myers;
>> > > >> >> >> >> > > > > > > >
>> >> >> >users(a)ovirt.org
>> > > >> >> >> >> > > > > > > >
>> >> >> >Subject: Re: [Users] Pxeboot
>> > > >> >> >> >> > > > > > > >
>> >> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >> >On Wed, 2012-02-08 at 15:19
>> > > >> >> >> >> > > > > > > >
>> >> >> >-0800, Li, David
>> > > >> >> >wrote:
>> > > >> >> >> >> > > > > > > >
>> >> >> >> Perry,
>> > > >> >> >> >> > > > > > > >
>> >> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >> I am glad you brought this up.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> I 'd be perfectly happy to
>> > > >> >> >> >> > > > > > > >
>> >> >> >> run the root fs entirely in
>> > > >> >> >> >RAM.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> In fact that would
>> > > >> >> >> >> > > > > > > >
>> >> >> >be ideal for me. It's just I
>> > > >> >> >> >> > > > > > > >
>> >> >> >am not quite sure how to use
>> > > >> >> >> >> > > > > > > >
>> >> >> >pxeboot to achieve
>> > > >this.
>> > > >> >> >> >> > > > > > > >
>> >> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >> I am doing a test now using
>> > > >> >> >> >> > > > > > > >
>> >> >> >> the tftpboot files
>> > > >> >> >> >created from the iso.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> As far as I see, the kernel
>> > > >> >> >> >> > > > > > > >
>> >> >> >> boot options
>> > > >> >> >> >(pxelinux.cfg/default) has:
>> > > >> >> >> >> > > > > > > >
>> >> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >> root=live:/ovirt-node-image-2.2.2-
>1.1.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> fc1 6.i so
>> > > >> >> >> >> > > > > > > >
>> >> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >> With this I can only pxeboot
>> > > >> >> >> >> > > > > > > >
>> >> >> >> to the intall screen. What
>> > > >> >> >> >> > > > > > > >
>> >> >> >> should I use to let the
>> > > >> >> >> >> > > > > > > >
>> >> >> >kernel mount the root fs in memory?
>> > > >> >> >> >> > > > > > > >
>> >> >> >Something like
>> > > >> >> >> >> > > > > > > >
>root=/dev/ram0?
>> > > >> >> >> >> > > > > > > >
>> >> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >> David
>> > > >> >> >> >> > > > > > > >
>> >> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >> >It's not currently possible with ovirt-
>node.
>> > > >> >> >> >> > > > > > > >
>> >> >> >That's the whole stateless
>> > > >> >> >> >> > > > > > > >
>> >> >> >feature that we outlined.
>> > > >> >> >> >> > > > > > > >
>> >> >> >Once we actually have it
>> > > >> >> >> >> > > > > > > >
>> >> >> >implemented, it will be
>> > > >> >> >> >> > > > > > > >
>> >> >> >something along the lines of
>> > > >> >> >> >> > > > > > > >
>> >> >> >adding "stateless" to
>> > > >> >> >> >> > > > > > > >
>> >> >the kernel commandline.
>> > > >> >> >> >> > > > > > > >
>> >> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >> >Mike
>> > > >> >> >> >> > > > > > > >
>> >> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >-----Original Message-----
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >From: Perry Myers
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >[mailto:pmyers@redhat.com]
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >Sent: Wednesday, February
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >08, 2012
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >2:54 PM
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >To: Mike Burns
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >Cc: Li, David;
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >users(a)ovirt.org
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >Subject: Re: [Users]
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >Pxeboot
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >On 02/08/2012 05:03 PM,
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >Mike Burns
>> > > >wrote:
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> On Wed, 2012-02-08 at
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> 13:46 -0800, Li, David
>> > > >> >> >> >wrote:
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> Mike,
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>>
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> If I understand this
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> correctly, today I
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> should be able to
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> pxeboot and nfs mount
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> the
>> > > >> >> >> >root fs from a remote server.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> Apart from setting up
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> the pxe stuff, I 'd have
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> to populate the ovirt
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> node root fs on the
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> server
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> - perhaps steal it from a disk
>install.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> In other words I am
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> concerned about the
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> point from which the
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> kernel starts to execute
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> /init script (in the
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> initramfs) to the
>> > > >> >> >> >point /init is able to mount the final
root fs from a remote
>server.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> No, there is no way to
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> set this up currently in
>> > > >> >> >> >ovirt-node.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> You could install using a
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> remote iscsi lun if you
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> have a hardware iscsi
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> HBA, but there isn't a
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> way to mount a remote nfs
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> share as the
>> > > >> >> >> >> > > > > > > >
>> >> >root fs.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> Supporting a remote NFS
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> share as the root fs
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> isn't even something that
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> requested as an RFE at
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> this point or on the
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> roadmap as far as
>> > > >> >> >> >I'm aware.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> It sounds like what
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> you're really looking for
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> is a shared root fs that multiple
>hosts could use.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> This is something that we
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> will probably look into
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> eventually, but it's not
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >> on the immediate
>> > > >> >> >> >> > > > > > > >
>> >> >roadmap.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >Given that the rootfs of
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >oVirt Node is fairly small
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >and in a truly stateless
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >environment would just run
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >out of system RAM, there's
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >no real reason to try to do
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >a shared NFS based
>> > > >> >> >> >> > > > > > > >
>rootfs.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >It's an unnecessary
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >complication I think, if
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >the end goal is to move to
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >truly
>> > > >> >> >> >> > > > > > > >
>> >> >> >stateless.
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >For larger systems where
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >the rootfs is on the order
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >of GB's, shared root may
>> > > >> >> >> >> > > > > > > >
>> >> >> >> >make more
>> > > >> >> >> >sense.
>> > > >> >> >> >> > > > > > > >
>> >> >> >>
>> > > >> >> >>
>____________________________________________
>> > > >> >> >> >> > > > > > > >
>> >> >> >> ___ Users mailing list
>> > > >> >> >> >> > > > > > > >
>> >> >> >> Users(a)ovirt.org
>> > > >> >> >> >> > > > > > > >
>> >> >> >>
http://lists.ovirt.org/mailm
>> > > >> >> >> >> > > > > > > >
>> >> >> >> an/list inf o/u ser s
>> > > >> >> >> >> > > > > > > >
>> >> >> >
>> > > >> >> >> >> > > > > > > >
>> >> >>
>> > > >> >> >> >> > > > > > > >
>> >> >
>> > > >> >> >> >> > > > > > > >
>> >>
>> > > >> >> >> >> > > > > > > >
>> >>
>> > > >> >> >>
>_______________________________________________
>> > > >> >> >> >> > > > > > > >
>> >> Users mailing list Users(a)ovirt.org
>> > > >> >> >> >> > > > > > > >
>> >>
http://lists.ovirt.org/mailman/lis
>> > > >> >> >> >> > > > > > > >
>> >> tinfo/user
>> > > >> >> >> >> > > > > > > >
>> >> s
>> > > >> >> >> >> > > > > > > >
>> >
>> > > >> >> >> >> > > > > > > >
>>
>> > > >> >> >> >> > > > > > > >
>>
>> > > >> >> >>
>_______________________________________________
>> > > >> >> >> >> > > > > > > >
>> Users mailing list Users(a)ovirt.org
>> > > >> >> >> >> > > > > > > >
>>
http://lists.ovirt.org/mailman/listin
>> > > >> >> >> >> > > > > > > >
>> fo/users
>> > > >> >> >> >> > > > > > > >
>
>> > > >> >> >> >> > > > > > >
>
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > >
>> > > >> >> >> >> > > > > > >
>> > > >> >_______________________________________________
>> > > >> >> >> >> > > > > > >
Users mailing list Users(a)ovirt.org
>> > > >> >> >> >> > > > > > >
http://lists.ovirt.org/mailman/listinfo/us
>> > > >> >> >> >> > > > > > > ers
>> > > >> >> >> >> > > > > >
>> > > >> >> >> >> > > > > >
>> > > >> >> >> >> > > > > >
>> > > >> >_______________________________________________
>> > > >> >> >> >> > > > > > Users
mailing list Users(a)ovirt.org
>> > > >> >> >> >> > > > > >
http://lists.ovirt.org/mailman/listinfo/user
>> > > >> >> >> >> > > > > > s
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > > >
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > > >
>> > > >> >> >> >> > >
>> > > >> >> >> >> > >
>> > > >> >> >> >> > >
>_______________________________________________
>> > > >> >> >> >> > > Users mailing list
Users(a)ovirt.org
>> > > >> >> >> >> > >
http://lists.ovirt.org/mailman/listinfo/users
>> > > >> >> >> >> >
>> > > >> >> >> >> >
>> > > >> >> >> >> >
>_______________________________________________
>> > > >> >> >> >> > Users mailing list
>> > > >> >> >> >> > Users(a)ovirt.org
>> > > >> >> >> >> >
http://lists.ovirt.org/mailman/listinfo/users
>> > > >> >> >> >>
>> > > >> >> >> >>
>> > > >> >> >> >>
>_______________________________________________
>> > > >> >> >> >> Users mailing list
>> > > >> >> >> >> Users(a)ovirt.org
>> > > >> >> >> >>
http://lists.ovirt.org/mailman/listinfo/users
>> > > >> >> >> >
>> > > >> >> >>
>> > > >> >> >>
_______________________________________________
>> > > >> >> >> Users mailing list
>> > > >> >> >> Users(a)ovirt.org
>> > > >> >> >>
http://lists.ovirt.org/mailman/listinfo/users
>> > > >> >> >
>> > > >> >>
>> > > >> >
>> > > >>
>> > > >> _______________________________________________
>> > > >> Users mailing list
>> > > >> Users(a)ovirt.org
>> > > >>
http://lists.ovirt.org/mailman/listinfo/users
>> > > >
>> > >
>> > > _______________________________________________
>> > > Users mailing list
>> > > Users(a)ovirt.org
>> > >
http://lists.ovirt.org/mailman/listinfo/users
>> >
>> >
>>
>>
>