3:37 a.m.
Hi all.
I acrtually did something like that myself.
I started out with a single node HC cluster. I then added another node (and plan to add a
third). This is what I did:
1) Set up the new node. Make sure that you have all dependencies. (In my case I started
with a Centos 8 machine, and installed vdms-gluster and gluster-ansible)
2) Configure the bricks. For this I just copied over hc_wizard_inventory.yml over from the
first node, edited it to fit the second node, and just ran the gluster.infra role.
3) Expand the volume. In this case with the following command:
gluster volume add-brick engine replica 2 <host>:/gluster_bricks/engine/engine
4) now just add the host as a hypervisor using the management console.
I plan on adding a third node. Then I want to have full replica on the engine, and replica
2 + arbiter on the vmstore volume.
Expanding gluster volumes, migrating from distributed to replicated and even replacing
bricks etc. is rather easy in Gluster once you know how it works. I have even replaced all
the servers on a live gluster cluster, without service interruption…
Krist
On Jul 18, 2019, 09:58 +0200, Leo David <leoalex(a)gmail.com>, wrote:
Hi,
Looks like the only way arround would be to create a brand-new volume as replicated on
other disks, and start moving the vms all around the place between volumes ?
Cheers,
Leo
> On Mon, May 27, 2019 at 1:53 PM Leo David <leoalex(a)gmail.com> wrote:
> > Hi,
> > Any suggestions ?
> > Thank you very much !
> >
> > Leo
> >
> > > On Sun, May 26, 2019 at 4:38 PM Strahil Nikolov
<hunter86_bg(a)yahoo.com> wrote:
> > > > Yeah,
> > > > it seems different from the docs.
> > > > I'm adding the gluster users list ,as they are more experienced
into that.
> > > >
> > > > @Gluster-users,
> > > >
> > > > can you provide some hint how to add aditional replicas to the below
volumes , so they become 'replica 2 arbiter 1' or 'replica 3' type volumes
?
> > > >
> > > >
> > > > Best Regards,
> > > > Strahil Nikolov
> > > >
> > > > В неделя, 26 май 2019 г., 15:16:18 ч. Гринуич+3, Leo David
<leoalex(a)gmail.com> написа:
> > > >
> > > >
> > > > Thank you Strahil,
> > > > The engine and ssd-samsung are distributed...
> > > > So these are the ones that I need to have replicated accross new
nodes.
> > > > I am not very sure about the procedure to accomplish this.
> > > > Thanks,
> > > >
> > > > Leo
> > > >
> > > > On Sun, May 26, 2019, 13:04 Strahil <hunter86_bg(a)yahoo.com>
wrote:
> > > > > Hi Leo,
> > > > > As you do not have a distributed volume , you can easily switch
to replica 2 arbiter 1 or replica 3 volumes.
> > > > > You can use the following for adding the bricks:
> > > > >
https://access.redhat.com/documentation/en-US/Red_Hat_Storage/2.1/html/Ad...
> > > > > Best Regards,
> > > > > Strahil Nikoliv
> > > > > On May 26, 2019 10:54, Leo David <leoalex(a)gmail.com>
wrote:
> > > > > > Hi Stahil,
> > > > > > Thank you so much for yout input !
> > > > > >
> > > > > > gluster volume info
> > > > > >
> > > > > >
> > > > > > Volume Name: engine
> > > > > > Type: Distribute
> > > > > > Volume ID: d7449fc2-cc35-4f80-a776-68e4a3dbd7e1
> > > > > > Status: Started
> > > > > > Snapshot Count: 0
> > > > > > Number of Bricks: 1
> > > > > > Transport-type: tcp
> > > > > > Bricks:
> > > > > > Brick1: 192.168.80.191:/gluster_bricks/engine/engine
> > > > > > Options Reconfigured:
> > > > > > nfs.disable: on
> > > > > > transport.address-family: inet
> > > > > > storage.owner-uid: 36
> > > > > > storage.owner-gid: 36
> > > > > > features.shard: on
> > > > > > performance.low-prio-threads: 32
> > > > > > performance.strict-o-direct: off
> > > > > > network.remote-dio: off
> > > > > > network.ping-timeout: 30
> > > > > > user.cifs: off
> > > > > > performance.quick-read: off
> > > > > > performance.read-ahead: off
> > > > > > performance.io-cache: off
> > > > > > cluster.eager-lock: enable
> > > > > > Volume Name: ssd-samsung
> > > > > > Type: Distribute
> > > > > > Volume ID: 76576cc6-220b-4651-952d-99846178a19e
> > > > > > Status: Started
> > > > > > Snapshot Count: 0
> > > > > > Number of Bricks: 1
> > > > > > Transport-type: tcp
> > > > > > Bricks:
> > > > > > Brick1: 192.168.80.191:/gluster_bricks/sdc/data
> > > > > > Options Reconfigured:
> > > > > > cluster.eager-lock: enable
> > > > > > performance.io-cache: off
> > > > > > performance.read-ahead: off
> > > > > > performance.quick-read: off
> > > > > > user.cifs: off
> > > > > > network.ping-timeout: 30
> > > > > > network.remote-dio: off
> > > > > > performance.strict-o-direct: on
> > > > > > performance.low-prio-threads: 32
> > > > > > features.shard: on
> > > > > > storage.owner-gid: 36
> > > > > > storage.owner-uid: 36
> > > > > > transport.address-family: inet
> > > > > > nfs.disable: on
> > > > > >
> > > > > > The other two hosts will be 192.168.80.192/193 - this is
gluster dedicated network over 10GB sfp+ switch.
> > > > > > - host 2 wil have identical harware configuration with host
1 ( each disk is actually a raid0 array )
> > > > > > - host 3 has:
> > > > > > - 1 ssd for OS
> > > > > > - 1 ssd - for adding to engine volume in a full replica
3
> > > > > > - 2 ssd's in a raid 1 array to be added as arbiter
for the data volume ( ssd-samsung )
> > > > > > So the plan is to have "engine" scaled in a full
replica 3, and "ssd-samsung" scalled in a replica 3 arbitrated.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Sun, May 26, 2019 at 10:34 AM Strahil
<hunter86_bg(a)yahoo.com> wrote:
> > > > > > > Hi Leo,
> > > > > > > Gluster is quite smart, but in order to provide any
hints , can you provide output of 'gluster volume info <glustervol>'.
> > > > > > > If you have 2 more systems , keep in mind that it is
best to mirror the storage on the second replica (2 disks on 1 machine -> 2 disks on
the new machine), while for the arbiter this is not neccessary.
> > > > > > > What is your network and NICs ? Based on my experience
, I can recommend at least 10 gbit/s interfase(s).
> > > > > > > Best Regards,
> > > > > > > Strahil Nikolov
> > > > > > > On May 26, 2019 07:52, Leo David
<leoalex(a)gmail.com> wrote:
> > > > > > > > Hello Everyone,
> > > > > > > > Can someone help me to clarify this ?
> > > > > > > > I have a single-node 4.2.8 installation ( only
two gluster storage domains - distributed single drive volumes ). Now I just got two
identintical servers and I would like to go for a 3 nodes bundle.
> > > > > > > > Is it possible ( after joining the new nodes to
the cluster ) to expand the existing volumes across the new nodes and change them to
replica 3 arbitrated ?
> > > > > > > > If so, could you share with me what would it be
the procedure ?
> > > > > > > > Thank you very much !
> > > > > > > >
> > > > > > > > Leo
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Best regards, Leo David
> >
> >
> > --
> > Best regards, Leo David
--
Best regards, Leo David
_______________________________________________
Gluster-users mailing list
Gluster-users(a)gluster.org
https://lists.gluster.org/mailman/listinfo/gluster-users