[ovirt-users] Intel Xeon Platinum 8276M vs oVirt 4.4.10.2-1

Hi all! Does anyone use or used Intel Xeon Platinum 8276M with oVirt 4.4.10? *I have the following situation:* I have these 2 sockets on a host, and on bash (lscpu) I identify the 2 sockets, however the oVirt interface only identifies 1 socket: *lscpu:* [root@ovirt03 ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 112 On-line CPU(s) list: 0-111 Thread(s) per core: 2 Core(s) per socket: 28 *Socket(s): 2* NUMA node(s): 2 Vendor ID: GenuineIntel BIOS Vendor ID: Intel(R) Corporation CPU family: 6 Model: 85 Model name: Intel(R) Xeon(R) Platinum 8276M CPU @ 2.20GHz BIOS Model name: Intel(R) Xeon(R) Platinum 8276M CPU @ 2.20GHz Stepping: 7 CPU MHz: 2990.453 CPU max MHz: 4000.0000 CPU min MHz: 1000.0000 BogoMIPS: 4400.00 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K L3 cache: 39424K NUMA node0 CPU(s): 0-27,56-83 NUMA node1 CPU(s): 28-55,84-111 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cdp_l3 invpcid_single intel_ppin ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid cqm mpx rdt_a avx512f avx512dq rdseed adx smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts pku ospke avx512_vnni md_clear flush_l1d arch_capabilities [root@ovirt03 ~]# *oVirt Host Interface:* CPU Model Name: Intel(R) Xeon(R) Platinum 8276M CPU @ 2.20GHz CPU Type: Secure Intel Cascadelake Server Family *CPU Sockets: 1* CPU Cores per Socket: 56 CPU Threads per Core: 2 (SMT Enabled) TSC Frequency: 2199999000 (scaling enabled) I need it to show the 2 sockets because I need to configure the NUMA. If anyone has any tips or fixes, I'd appreciate it. -- Att, Jorge Visentini +55 55 98432-9868