9:23 p.m.
On Sun, May 25, 2014 at 4:31 PM, Gianluca Cecchi
<gianluca.cecchi(a)gmail.com>wrote:
[snip]
> But I'm not able to see in webadmin how to add a custom property
"extnet"
> to this vnic profile and set it to the "natted" value.
> [snip]
> Is it perhaps a command line only option?
> Based on this page I wouldn't expect so:
> http://www.ovirt.org/Features/Vnic_Profiles
> I see instead a "Please
select a key" dropdown menu where I can only
> select "Security Groups"...
> [snip]
OK.
so after reading this page
http://gerrit.ovirt.org/gitweb?p=vdsm.git;a=blob;f=vdsm_hooks/extnet/READ...
BTW: is it in any package?
[root@tekkaman ovirt-engine]# rpm -ql vdsm-hook-extnet
/usr/libexec/vdsm/hooks/before_device_create/50_extnet
/usr/libexec/vdsm/hooks/before_nic_hotplug/50_extnet
[root@tekkaman ovirt-engine]#
before
[root@tekkaman ovirt-engine]# engine-config -g CustomDeviceProperties
CustomDeviceProperties: version: 3.0
CustomDeviceProperties: version: 3.1
CustomDeviceProperties: version: 3.2
CustomDeviceProperties: version: 3.3
CustomDeviceProperties:
{type=interface;prop={SecurityGroups=^(?:(?:[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12},
*)*[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}|)$}} version: 3.4
then
[root@tekkaman ovirt-engine]# engine-config -s
CustomDeviceProperties='{type=interface;prop={extnet=^[a-zA-Z0-9_ ---]+$}}'
Please select a version:
1. 3.0
2. 3.1
3. 3.2
4. 3.3
5. 3.4
5
after:
[root@tekkaman ovirt-engine]# engine-config -g CustomDeviceProperties
CustomDeviceProperties: version: 3.0
CustomDeviceProperties: version: 3.1
CustomDeviceProperties: version: 3.2
CustomDeviceProperties: version: 3.3
CustomDeviceProperties: {type=interface;prop={extnet=^[a-zA-Z0-9_ ---]+$}}
version: 3.4
# systemctl restart ovirt-engine
BTW: is it correct that what before was security groups is now barely
overwritten by extnet? Or is there a syntax with which I can add extnet
without deleting security groups (even if I don't understand its usage,
possibly with openstack integration based on its name...)
Anyway now in oVirt webadmin I can edit the "natted" vnic profile and
inside the dropdown menu (there isn't any header marked like "custom
property" or similar, that could be useful....)
shutdown and poweroff vm
start vm
and now it correctly gets the ip 192.168.125.91 defined inside the dhcp
range for "natted" network
virsh dumpxml f19
...
<interface type='network'
<mac address='00:1a:4a:a8:01:55'/
<source network='natted'/
<target dev='vnet0'/ <model
type='virtio'/ <filterref
filter='vdsm-no-mac-spoofing'/
<link state='up'/ <alias
name='net0'/ <address type='pci'
domain='0x0000' bus='0x00' slot='0x03'
function='0x0'/ </interface ...
The web admin portal gives the corect new ip of the VM, as sent by vdagent.
The VM is able to navigate through Internet and
http://www.whatismyip.com/
gives for example consistent and equal information both using my all-in-one
server and my VM
Now I'm goint to test if I can solve the openvpn issue
Gianluca