11:32 a.m.
I'm trying to setup the hosted engine on top of iSCSI storage. It successfully logs in
and gets the target, however the process errors out claiming there are no LUNs. But if you
look on the host, the disks were added to the system.
[ INFO ] TASK [ovirt.hosted_engine_setup : iSCSI discover with REST API]
[ INFO ] ok: [localhost]
The following targets have been found:
[1] iqn.2001-04.com.billdurr.durrnet.vm-int:vmdata
TPGT: 1, portals:
192.168.47.10:3260
Please select a target (1) [1]: 1
[ INFO ] Getting iSCSI LUNs list
...
[ INFO ] TASK [ovirt.hosted_engine_setup : Get iSCSI LUNs]
[ INFO ] ok: [localhost]
[ ERROR ] Cannot find any LUN on the selected target
[ ERROR ] Unable to get target list
Here's what the config in targetcli looks like
[root@vm1 ~]# targetcli ls
o- / ..................................................................... [...]
o- backstores .......................................................... [...]
| o- block .............................................. [Storage Objects: 2]
| | o- p_iscsi_lun1 .............. [/dev/drbd0 (62.0GiB) write-thru activated]
| | | o- alua ............................................... [ALUA Groups: 1]
| | | o- default_tg_pt_gp ................... [ALUA state: Active/optimized]
| | o- p_iscsi_lun2 ............. [/dev/drbd1 (310.6GiB) write-thru activated]
| | o- alua ............................................... [ALUA Groups: 1]
| | o- default_tg_pt_gp ................... [ALUA state: Active/optimized]
| o- fileio ............................................. [Storage Objects: 0]
| o- pscsi .............................................. [Storage Objects: 0]
| o- ramdisk ............................................ [Storage Objects: 0]
o- iscsi ........................................................ [Targets: 1]
| o- iqn.2001-04.com.billdurr.durrnet.vm-int:vmdata ................ [TPGs: 1]
| o- tpg1 .............................................. [gen-acls, no-auth]
| o- acls ...................................................... [ACLs: 0]
| o- luns ...................................................... [LUNs: 2]
| | o- lun0 ......... [block/p_iscsi_lun1 (/dev/drbd0) (default_tg_pt_gp)]
| | o- lun1 ......... [block/p_iscsi_lun2 (/dev/drbd1) (default_tg_pt_gp)]
| o- portals ................................................ [Portals: 1]
| o- 192.168.47.10:3260 ........................................... [OK]
o- loopback ..................................................... [Targets: 0]
o- srpt ......................................................... [Targets: 0]
The two LUNs show up on the host after the hosted engine setup tries to enumerate the LUNs
for the target
[root@vm1 ~]# lsscsi
[0:0:0:0] storage HP P420i 8.32 -
[0:1:0:0] disk HP LOGICAL VOLUME 8.32 /dev/sda
[0:1:0:1] disk HP LOGICAL VOLUME 8.32 /dev/sdb
[0:1:0:2] disk HP LOGICAL VOLUME 8.32 /dev/sdc
[11:0:0:0] disk LIO-ORG p_iscsi_lun1 4.0 /dev/sdd
[11:0:0:1] disk LIO-ORG p_iscsi_lun2 4.0 /dev/sde