2:57 a.m.
And network configurations on node:
[root at ovirt-node] # brctl show
bridge name bridge id STP enabled interfaces
docker0 8000.0242ae1de711 no
ovirtmgmt 8000.001320ff73aa no eth0
[root at ovirt-node] # ifconfig -a
docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11
inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6331 errors:0 dropped:0 overruns:0 frame:0
TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB)
Interrupt:20 Memory:d1100000-d1120000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:36 errors:0 dropped:0 overruns:0 frame:0
TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)
ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
inet addr:128.224.165.170 Bcast:128.224.165.255
Mask:255.255.255.0
inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link
inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6295 errors:0 dropped:6 overruns:0 frame:0
TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)
sit0 Link encap:UNSPEC HWaddr
00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Thanks,
Kai
On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang(a)gmail.com> wrote:
Hi,
When I install a host, it fails with:
2016-05-24 07:00:01,749 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to
Non-Operational, it is missing the following networks: 'ovirtmgmt'
2016-05-24 07:00:01,781 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job
ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event
ID: -1, Message: Host node3 does not comply with the cluster Default
networks, the following networks are missing on host: 'ovirtmgmt'
After I click the "Hosts" -> subtab "Network Interfaces" ->
"Setup Host
Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link
with eth0, then activate host "node3" successfully.
My question is how to make such manual operation automatically? Then I
can run some automatic tests.
Thanks a lot.
--Kai