[ovirt-users] oVirt SHE smart-automated backup

Dear oVirt, For a while now I have been running backup of oVirt engine via ansible. And that works just fine. However, its still recommended, in SHE HA environment, especially for Restore purpose to have one of HA nodes in Maintenance mode, clean from Virtual load. Has anyone so far been able to automate oVirt engine backup in following or similar way: 1. Register on which HA node is SHE atm 2. Pick the other HA node to go into maintenance mode – in order to have one of HA nodes without virtual load 3. Verify it’s in maintenance mode 4. Execute engine-backup 5. Remove the maintenance mode of the node from step 2 Even if you are half way through, I would be happy to get involved and contribute. Kindly awaiting your reply. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo e: m.vrgotic@activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message.