Sorry, I mistakenly send the email: Below is the output of: [root@glustermount ~]# systemctl status ovirt-imageio-daemon.service -l ● ovirt-imageio-daemon.service - oVirt ImageIO Daemon Loaded: loaded (/usr/lib/systemd/system/ovirt-imageio-daemon.service; disabled; vendor preset: disabled) Active: failed (Result: start-limit) since Tue 2018-09-04 16:55:16 SAST; 19h ago Condition: start condition failed at Wed 2018-09-05 11:56:46 SAST; 2min 9s ago ConditionPathExists=/etc/pki/vdsm/certs/vdsmcert.pem was not met Process: 11345 ExecStart=/usr/bin/ovirt-imageio-daemon (code=exited, status=1/FAILURE) Main PID: 11345 (code=exited, status=1/FAILURE) Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon. Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service holdoff time over, scheduling restart. Sep 04 16:55:16 glustermount.goku systemd[1]: start request repeated too quickly for ovirt-imageio-daemon.service Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon. Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed. [root@glustermount ~]# journalctl -xe -u ovirt-imageio-daemon.service Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: File "/usr/lib64/python2.7/logging/handlers.py", Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: BaseRotatingHandler.__init__(self, filename, mode Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: File "/usr/lib64/python2.7/logging/handlers.py", Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: logging.FileHandler.__init__(self, filename, mode Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: File "/usr/lib64/python2.7/logging/__init__.py", Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: StreamHandler.__init__(self, self._open()) Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: File "/usr/lib64/python2.7/logging/__init__.py", Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: stream = open(self.baseFilename, self.mode) Sep 04 16:55:16 glustermount.goku ovirt-imageio-daemon[11345]: IOError: [Errno 2] No such file or directory: '/v Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service: main process exited, code=exited, st Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon. -- Subject: Unit ovirt-imageio-daemon.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit ovirt-imageio-daemon.service has failed. -- -- The result is failed. Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service holdoff time over, scheduling restart Sep 04 16:55:16 glustermount.goku systemd[1]: start request repeated too quickly for ovirt-imageio-daemon.servic Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon. -- Subject: Unit ovirt-imageio-daemon.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit ovirt-imageio-daemon.service has failed. -- -- The result is failed. Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed. On Wed, Sep 5, 2018 at 12:01 PM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
# systemctl status ovirt-imageio-daemon.service ● ovirt-imageio-daemon.service - oVirt ImageIO Daemon Loaded: loaded (/usr/lib/systemd/system/ovirt-imageio-daemon.service; disabled; vendor preset: disabled) Active: failed (Result: start-limit) since Tue 2018-09-04 16:55:16 SAST; 19h ago Condition: start condition failed at Wed 2018-09-05 11:56:46 SAST; 1min 58s ago ConditionPathExists=/etc/pki/vdsm/certs/vdsmcert.pem was not met Process: 11345 ExecStart=/usr/bin/ovirt-imageio-daemon (code=exited, status=1/FAILURE) Main PID: 11345 (code=exited, status=1/FAILURE)
Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon. Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service holdoff time over, scheduling ...art. Sep 04 16:55:16 glustermount.goku systemd[1]: start request repeated too quickly for ovirt-imageio-daemon...vice Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon. Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed. Hint: Some lines were ellipsized, use -l to show in full. [root@glustermount ~]# systemctl status ovirt-imageio-daemon.service -l ● ovirt-imageio-daemon.service - oVirt ImageIO Daemon Loaded: loaded (/usr/lib/systemd/system/ovirt-imageio-daemon.service; disabled; vendor preset: disabled) Active: failed (Result: start-limit) since Tue 2018-09-04 16:55:16 SAST; 19h ago Condition: start condition failed at Wed 2018-09-05 11:56:46 SAST; 2min 9s ago ConditionPathExists=/etc/pki/vdsm/certs/vdsmcert.pem was not met Process: 11345 ExecStart=/usr/bin/ovirt-imageio-daemon (code=exited, status=1/FAILURE) Main PID: 11345 (code=exited, status=1/FAILURE)
Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon. Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service holdoff time over, scheduling restart. Sep 04 16:55:16 glustermount.goku systemd[1]: start request repeated too quickly for ovirt-imageio-daemon.service Sep 04 16:55:16 glustermount.goku systemd[1]: Failed to start oVirt ImageIO Daemon. Sep 04 16:55:16 glustermount.goku systemd[1]: Unit ovirt-imageio-daemon.service entered failed state. Sep 04 16:55:16 glustermount.goku systemd[1]: ovirt-imageio-daemon.service failed.
Output of:
On Wed, Sep 5, 2018 at 11:35 AM, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Wed, Sep 5, 2018 at 11:10 AM Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi All,
The host deploy logs are showing the below errors:
[root@garlic engine-logs-2018-09-05T08:48:22Z]# cat /var/log/ovirt-hosted-engine-setup/engine-logs-2018-09-05T08 \:34\:55Z/ovirt-engine/host-deploy/ovirt-host-deploy-20180 905103605-garlic.sanren.ac.za-543b536b.log | grep -i error 2018-09-05 10:35:46,909+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/error=bool:'False' 2018-09-05 10:35:47,116 [ERROR] __main__.py:8011:MainThread @identity.py:145 - Reload of consumer identity cert /etc/pki/consumer/cert.pem raised an exception with msg: [Errno 2] No such file or directory: '/etc/pki/consumer/key.pem' 2018-09-05 10:35:47,383+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/error=bool:'False' 2018-09-05 10:35:47,593 [ERROR] __main__.py:8011:MainThread @identity.py:145 - Reload of consumer identity cert /etc/pki/consumer/cert.pem raised an exception with msg: [Errno 2] No such file or directory: '/etc/pki/consumer/key.pem' 2018-09-05 10:35:48,245+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/error=bool:'False' Job for ovirt-imageio-daemon.service failed because the control process exited with error code. See "systemctl status ovirt-imageio-daemon.service" and "journalctl -xe" for details. RuntimeError: Failed to start service 'ovirt-imageio-daemon' 2018-09-05 10:36:05,098+0200 ERROR otopi.context context._executeMethod:152 Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio-daemon' 2018-09-05 10:36:05,099+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/error=bool:'True' 2018-09-05 10:36:05,099+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/exceptionInfo=list:'[(<type 'exceptions.RuntimeError'>, RuntimeError("Failed to start service 'ovirt-imageio-daemon'",), <traceback object at 0x7f4de25ff320>)]' 2018-09-05 10:36:05,106+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/error=bool:'True' 2018-09-05 10:36:05,106+0200 DEBUG otopi.context context.dumpEnvironment:869 ENV BASE/exceptionInfo=list:'[(<type 'exceptions.RuntimeError'>, RuntimeError("Failed to start service 'ovirt-imageio-daemon'",), <traceback object at 0x7f4de25ff320>)]'
I coudn't find anything helpful from the internet.
something relevant int he output of systemctl status ovirt-imageio-daemon.service and journalctl -xe -u ovirt-imageio-daemon.service ?
On Tue, Sep 4, 2018 at 6:46 PM, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Tue, Sep 4, 2018 at 6:07 PM Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
Hi Sahina,
I am sorry I can't reproduce the error nor access the logs since I did a fresh installed pn nodes. However now I can't even react that far because the engine deployment fails to start the host up:
[ INFO ] TASK [Wait for the host to be up] [ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_hosts": [{"address": "goku.sanren.ac.za", "affinity_labels": [], "auto_numa_status": "unknown", "certificate": {"organization": " sanren.ac.za", "subject": "O=sanren.ac.za,CN=goku.sanren.ac.za"}, "cluster": {"href": "/ovirt-engine/api/clusters/1c a368cc-b052-11e8-b7de-00163e008187", "id": "1ca368cc-b052-11e8-b7de- 00163e008187"}, "comment": "", "cpu": {"speed": 0.0, "topology": {}}, "device_passthrough": {"enabled": false}, "devices": [], "external_network_provider_configurations": [], "external_status": "ok", "hardware_information": {"supported_rng_sources": []}, "hooks": [], "href": "/ovirt-engine/api/hosts/1c575995-70b1-43f7-b348-4a9788e070cd", "id": "1c575995-70b1-43f7-b348-4a9788e070cd", "katello_errata": [], "kdump_status": "unknown", "ksm": {"enabled": false}, "max_scheduling_memory": 0, "memory": 0, "name": "goku.sanren.ac.za", "network_attachments": [], "nics": [], "numa_nodes": [], "numa_supported": false, "os": {"custom_kernel_cmdline": ""}, "permissions": [], "port": 54321, "power_management": {"automatic_pm_enabled": true, "enabled": false, "kdump_detection": true, "pm_proxies": []}, "protocol": "stomp", "se_linux": {}, "spm": {"priority": 5, "status": "none"}, "ssh": {"fingerprint": "SHA256:B3/PDH551EFid93fm6PoRryi6/cXuVE8yNgiiiROh84", "port": 22}, "statistics": [], "status": "install_failed", "storage_connection_extensions": [], "summary": {"total": 0}, "tags": [], "transparent_huge_pages": {"enabled": false}, "type": "ovirt_node", "unmanaged_networks": [], "update_available": false}]}, "attempts": 120, "changed": false}
"status": "install_failed"
You have to check host-deploy logs to get a details error message.
Please help.
On Mon, Sep 3, 2018 at 1:34 PM, Sahina Bose <sabose@redhat.com> wrote:
On Wed, Aug 29, 2018 at 8:39 PM, Sakhi Hadebe <sakhi@sanren.ac.za> wrote:
> Hi, > > I am sorry to bother you again. > > I am trying to deploy an oVirt engine for oVirtNode-4.2.5.1. I get > the same error I encountered before: > > [ INFO ] TASK [Add glusterfs storage domain] > [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is > "[Problem while trying to mount target]". HTTP response code is 400. > [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": > "Fault reason is \"Operation Failed\". Fault detail is \"[Problem > while trying to mount target]\". HTTP response code is 400."} > Please specify the storage you would like to use > (glusterfs, iscsi, fc, nfs)[nfs]: > > The glusterd daemon is running. >
mounting 172.16.4.18:/engine at /rhev/data-center/mnt/glusterS D/172.16.4.18:_engine (mount:204) 2018-08-29 16:47:28,846+0200 ERROR (jsonrpc/3) [storage.HSM] Could not connect to storageServer (hsm:2398)
Can you try to see if you are able to mount 172.16.4.18:/engine on the server you're deploying Hosted Engine using "mount -t glusterfs 172.16.4.18:/engine /mnt/test"
> During the deployment of the engine it sets the engine entry in the > /etc/hosts file with the IP Address of 192.168.124.* which it gets form the > virbr0 bridge interface. I stopped the bridge and deleted it, but still > giving the same error. Not sure what causes it to use that interface. > Please help! > > But I give the engine an IP of 192.168.1.10 same subnet as my > gateway and my ovirtmgmt bridge. Attached is the ifconfig output of my > Node, engine.log and vdsm.log. > > Your assistance is always appreciated > > > > > > On Wed, Jul 11, 2018 at 11:47 AM, Sahina Bose <sabose@redhat.com> > wrote: > >> Is glusterd running on the server: goku.sanren.** >> There's an error >> Failed to get volume info: Command execution failed >> error: Connection failed. Please check if gluster daemon is >> operational >> >> Please check the volume status using "gluster volume status engine" >> >> and if all looks ok, attach the mount logs from /var/log/glusterfs >> >> On Wed, Jul 11, 2018 at 1:57 PM, Sakhi Hadebe <sakhi@sanren.ac.za> >> wrote: >> >>> Hi, >>> >>> I have managed to fix the error by enabling the DMA Virtualisation >>> in BIOS. I am now hit with a new error: It's failing to add a glusterfs >>> storage domain: >>> >>> [ INFO ] TASK [Add glusterfs storage domain] >>> [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail >>> is "[Problem while trying to mount target]". HTTP response code is 400. >>> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": >>> "Fault reason is \"Operation Failed\". Fault detail is \"[Problem while >>> trying to mount target]\". HTTP response code is 400."} >>> Please specify the storage you would like to use >>> (glusterfs, iscsi, fc, nfs)[nfs]: >>> >>> Attached are vdsm and engine log files. >>> >>> >>> >>> >>> >>> On Wed, Jul 11, 2018 at 9:57 AM, Sakhi Hadebe <sakhi@sanren.ac.za> >>> wrote: >>> >>>> >>>> >>>> On Wed, Jul 11, 2018 at 9:33 AM, Sakhi Hadebe <sakhi@sanren.ac.za >>>> > wrote: >>>> >>>>> Hi, >>>>> >>>>> Below are the versions of packages installed. Please find the >>>>> logs attached. >>>>> Qemu: >>>>> ipxe-roms-qemu-20170123-1.git4e85b27.el7_4.1.noarch >>>>> libvirt-daemon-driver-qemu-3.9.0-14.el7_5.6.x86_64 >>>>> qemu-img-ev-2.10.0-21.el7_5.4.1.x86_64 >>>>> qemu-kvm-ev-2.10.0-21.el7_5.4.1.x86_64 >>>>> qemu-kvm-common-ev-2.10.0-21.el7_5.4.1.x86_64 >>>>> >>>>> Libvirt installed packages: >>>>> libvirt-daemon-driver-storage-disk-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-config-nwfilter-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-storage-iscsi-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-network-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-libs-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-secret-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-storage-core-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-storage-gluster-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-storage-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-qemu-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-python-3.9.0-1.el7.x86_64 >>>>> libvirt-daemon-driver-nodedev-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-storage-rbd-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-storage-scsi-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-config-network-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-client-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-kvm-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-storage-logical-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-interface-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-lock-sanlock-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-storage-mpath-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-lxc-3.9.0-14.el7_5.6.x86_64 >>>>> libvirt-daemon-driver-nwfilter-3.9.0-14.el7_5.6.x86_64 >>>>> >>>>> Virt-manager: >>>>> virt-manager-common-1.4.3-3.el7.noarch >>>>> >>>>> oVirt: >>>>> [root@localhost network-scripts]# rpm -qa | grep ovirt >>>>> ovirt-setup-lib-1.1.4-1.el7.centos.noarch >>>>> cockpit-ovirt-dashboard-0.11.28-1.el7.noarch >>>>> ovirt-imageio-common-1.3.1.2-0.el7.centos.noarch >>>>> ovirt-vmconsole-host-1.0.5-4.el7.centos.noarch >>>>> ovirt-host-dependencies-4.2.3-1.el7.x86_64 >>>>> ovirt-engine-sdk-python-3.6.9.1-1.el7.noarch >>>>> ovirt-imageio-daemon-1.3.1.2-0.el7.centos.noarch >>>>> ovirt-host-4.2.3-1.el7.x86_64 >>>>> python-ovirt-engine-sdk4-4.2.7-2.el7.x86_64 >>>>> ovirt-host-deploy-1.7.4-1.el7.noarch >>>>> cockpit-machines-ovirt-169-1.el7.noarch >>>>> ovirt-hosted-engine-ha-2.2.14-1.el7.noarch >>>>> ovirt-vmconsole-1.0.5-4.el7.centos.noarch >>>>> ovirt-provider-ovn-driver-1.2.11-1.el7.noarch >>>>> ovirt-engine-appliance-4.2-20180626.1.el7.noarch >>>>> ovirt-release42-4.2.4-1.el7.noarch >>>>> ovirt-hosted-engine-setup-2.2.22.1-1.el7.noarch >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Wed, Jul 11, 2018 at 6:48 AM, Yedidyah Bar David < >>>>> didi@redhat.com> wrote: >>>>> >>>>>> On Tue, Jul 10, 2018 at 11:32 PM, Sakhi Hadebe < >>>>>> sakhi@sanren.ac.za> wrote: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I did not select any CPU architecture. It doenst gove me the >>>>>>> option to select one. It only states the number of virtual CPUs and the >>>>>>> memory for the engine VM. >>>>>>> >>>>>>> Looking at the documentation of installing >>>>>>> ovirt-release36.rpm....it does allow you to select te CPU, but not when >>>>>>> installing ovirt-release42.rpm >>>>>>> >>>>>>> On Tuesday, July 10, 2018, Alastair Neil < >>>>>>> ajneil.tech@gmail.com> wrote: >>>>>>> >>>>>>>> what did you select as your CPU architecture when you created >>>>>>>> the cluster? It looks like the VM is trying to use a CPU type of "Custom", >>>>>>>> how many nodes in your cluster? I suggest you specify the lowest common >>>>>>>> denominator of CPU architecture (e.g. Sandybridge) of the nodes as the CPU >>>>>>>> architecture of the cluster.. >>>>>>>> >>>>>>>> On Tue, 10 Jul 2018 at 12:01, Sakhi Hadebe < >>>>>>>> sakhi@sanren.ac.za> wrote: >>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> I have just re-installed centOS 7 in 3 servers and have >>>>>>>>> configured gluster volumes following this documentation: >>>>>>>>> https://www.ovirt.org/blog/2016/03/up-and-running-with-ovirt >>>>>>>>> -3-6/, But I have installed >>>>>>>>> >>>>>>>>> http://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm >>>>>>>>> >>>>>>>>> package. >>>>>>>>> Hosted-engine --deploy is failing with this error: >>>>>>>>> >>>>>>>>> "rhel7", "--virt-type", "kvm", "--memory", "16384", >>>>>>>>> "--vcpus", "4", "--network", "network=default,mac=00:16:3e:09:5e:5d,model=virtio", >>>>>>>>> "--disk", "/var/tmp/localvm0nnJH9/images >>>>>>>>> /eacac30d-0304-4c77-8753-6965e4b8c2e7/d494577e-027a-4209-895b-6132e6fc6b9a", >>>>>>>>> "--import", "--disk", "path=/var/tmp/localvm0nnJH9/seed.iso,device=cdrom", >>>>>>>>> "--noautoconsole", "--rng", "/dev/random", "--graphics", "vnc", "--video", >>>>>>>>> "vga", "--sound", "none", "--controller", "usb,model=none", "--memballoon", >>>>>>>>> "none", "--boot", "hd,menu=off", "--clock", "kvmclock_present=yes"], >>>>>>>>> "delta": "0:00:00.979003", "end": "2018-07-10 17:55:11.308555", "msg": >>>>>>>>> "non-zero return code", "rc": 1, "start": "2018-07-10 17:55:10.329552", >>>>>>>>> "stderr": "ERROR unsupported configuration: CPU mode 'custom' for x86_64 >>>>>>>>> kvm domain on x86_64 host is not supported by hypervisor\nDomain >>>>>>>>> installation does not appear to have been successful.\nIf it was, you can >>>>>>>>> restart your domain by running:\n virsh --connect qemu:///system start >>>>>>>>> HostedEngineLocal\notherwise, please restart your installation.", >>>>>>>>> "stderr_lines": ["ERROR unsupported configuration: CPU mode 'custom' for >>>>>>>>> x86_64 kvm domain on x86_64 host is not supported by hypervisor", "Domain >>>>>>>>> installation does not appear to have been successful.", "If it was, you can >>>>>>>>> restart your domain by running:", " virsh --connect qemu:///system start >>>>>>>>> HostedEngineLocal", "otherwise, please restart your installation."], >>>>>>>>> "stdout": "\nStarting install...", "stdout_lines": ["", "Starting >>>>>>>>> install..."]} >>>>>>>>> >>>>>>>> >>>>>> This seems to be in the phase where we create a local vm for >>>>>> the engine. We do this with plain virt-install, nothing fancy. Searching >>>>>> the net for "unsupported configuration: CPU mode 'custom'" finds other >>>>>> relevant reports, you might want to check them. You can see the command in >>>>>> bootstrap_local_vm.yml . >>>>>> >>>>>> Please check/share versions of relevant packages (libvirt*, >>>>>> qemu*, etc) and relevant logs (libvirt). >>>>>> >>>>>> Also updating the subject line and adding Simone. >>>>>> >>>>>> Best regards, >>>>>> -- >>>>>> Didi >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Regards, >>>>> Sakhi Hadebe >>>>> >>>>> Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR >>>>> >>>>> Tel: +27 12 841 2308 <+27128414213> >>>>> Fax: +27 12 841 4223 <+27128414223> >>>>> Cell: +27 71 331 9622 <+27823034657> >>>>> Email: sakhi@sanren.ac.za <shadebe@csir.co.za> >>>>> >>>>> >>>> >>>> >>>> -- >>>> Regards, >>>> Sakhi Hadebe >>>> >>>> Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR >>>> >>>> Tel: +27 12 841 2308 <+27128414213> >>>> Fax: +27 12 841 4223 <+27128414223> >>>> Cell: +27 71 331 9622 <+27823034657> >>>> Email: sakhi@sanren.ac.za <shadebe@csir.co.za> >>>> >>>> >>> >>> >>> -- >>> Regards, >>> Sakhi Hadebe >>> >>> Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR >>> >>> Tel: +27 12 841 2308 <+27128414213> >>> Fax: +27 12 841 4223 <+27128414223> >>> Cell: +27 71 331 9622 <+27823034657> >>> Email: sakhi@sanren.ac.za <shadebe@csir.co.za> >>> >>> >>> _______________________________________________ >>> Users mailing list -- users@ovirt.org >>> To unsubscribe send an email to users-leave@ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: https://www.ovirt.org/communit >>> y/about/community-guidelines/ >>> List Archives: https://lists.ovirt.org/archiv >>> es/list/users@ovirt.org/message/YHKUKW22QLRVS56XZBXEWOGORFWFEGIA/ >>> >>> >> > > > -- > Regards, > Sakhi Hadebe > > Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR > > Tel: +27 12 841 2308 <+27128414213> > Fax: +27 12 841 4223 <+27128414223> > Cell: +27 71 331 9622 <+27823034657> > Email: sakhi@sanren.ac.za <shadebe@csir.co.za> > >
-- Regards, Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
Tel: +27 12 841 2308 <+27128414213> Fax: +27 12 841 4223 <+27128414223> Cell: +27 71 331 9622 <+27823034657> Email: sakhi@sanren.ac.za <shadebe@csir.co.za>
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/communit y/about/community-guidelines/ List Archives: https://lists.ovirt.org/archiv es/list/users@ovirt.org/message/DS7O33ZSGV5ZAHXKA3KT2ABYW3VJJWXQ/
-- Regards, Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
Tel: +27 12 841 2308 <+27128414213> Fax: +27 12 841 4223 <+27128414223> Cell: +27 71 331 9622 <+27823034657> Email: sakhi@sanren.ac.za <shadebe@csir.co.za>
-- Regards, Sakhi Hadebe
Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR
Tel: +27 12 841 2308 <+27128414213> Fax: +27 12 841 4223 <+27128414223> Cell: +27 71 331 9622 <+27823034657> Email: sakhi@sanren.ac.za <shadebe@csir.co.za>
-- Regards, Sakhi Hadebe Engineer: South African National Research Network (SANReN)Competency Area, Meraka, CSIR Tel: +27 12 841 2308 <+27128414213> Fax: +27 12 841 4223 <+27128414223> Cell: +27 71 331 9622 <+27823034657> Email: sakhi@sanren.ac.za <shadebe@csir.co.za>