OK, it seems that a snapshot was having the files but linux didn't saw
a change between the images as the size was still the same.
I'm going to dd back :)
2016-07-21 20:04 GMT+02:00 Matt . <yamakasi.014(a)gmail.com>:
OK, it seems that my config volume for the hosted engine is empty, I
cannot tar anything out of it and I'm quite sure it has been empty for
ever as I got some strange warning every time.
Is there a way to recover that from files ? Backups/snapshots are empty so...
2016-07-21 13:43 GMT+02:00 Simone Tiraboschi <stirabos(a)redhat.com>:
> On Thu, Jul 21, 2016 at 12:38 PM, Matt . <yamakasi.014(a)gmail.com> wrote:
>> The deploy went OK from the GUI but it's still not "active" as
Hosted
>> engine Host. The install also wen very fast so it looked like it
>> didn't do anything witl the deploy setting in the GUI @ the hosted
>> engine tab.
>
> The difference with a standard host is just that it should create
> /etc/ovirt-hosted-engine/hosted-engine.conf and start ovirt-ha-agent
> and ovirt-ha-broker so it shouldn't be that longer.
>
> At the end, due to the issue with syncing the local maintenance mode
> from the engine, you have to connect to the host and run
> 'hosted-engine -set-maintenance --mode=none' from there.
>
> Can you please post the result of
> hosted-engine --vm-status and the status of ovirt-ha-agent?
>
>> Or should I re-deploy again on the commandline after adding the host
>> through the GUI ?
>>
>> About the initial GW, I didn't see that in the GUI.
>>
>> 2016-07-21 12:31 GMT+02:00 Simone Tiraboschi <stirabos(a)redhat.com>:
>>> On Thu, Jul 21, 2016 at 12:28 PM, Matt . <yamakasi.014(a)gmail.com>
wrote:
>>>> No problem I checked it out and applied it, no solution it seems.
>>>
>>> Do you mean that it's still referring to your initial gateway or that
>>> the deploy failed?
>>>
>>>> 2016-07-21 12:14 GMT+02:00 Simone Tiraboschi
<stirabos(a)redhat.com>:
>>>>> On Thu, Jul 21, 2016 at 12:09 PM, Matt .
<yamakasi.014(a)gmail.com> wrote:
>>>>>> OK, I did a deploy from the engine and the Hosted is "Not
Active" and
>>>>>
>>>>> Yes, sorry, I forgot to mention that.
>>>>> We have an open bug about re-activating an hosted-engine host from
the
>>>>> engine:
https://bugzilla.redhat.com/show_bug.cgi?id=1353600
>>>>> Connecting to the host and exiting the maintenance mode from there
is
>>>>> the temporary solution.
>>>>>
>>>>>> Engine HA is empty on 4.0.1
>>>>>>
>>>>>> 2016-07-21 11:58 GMT+02:00 Matt .
<yamakasi.014(a)gmail.com>:
>>>>>>> True, but you can up an IP on any device in that case because
you know
>>>>>>> what you are doing.
>>>>>>>
>>>>>>> I think that this can be finetuned, or at least multiple IPs
would be
>>>>>>> nice as I now need to add one IP from my vrrp setup, so if
there is a
>>>>>>> failover.... or I need to take down the second switch I'm
also done.
>>>>>>>
>>>>>>> 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi
<stirabos(a)redhat.com>:
>>>>>>>> On Thu, Jul 21, 2016 at 10:03 AM, Matt .
<yamakasi.014(a)gmail.com> wrote:
>>>>>>>>> OK, I will check this laster on, as I was having
issues with the
>>>>>>>>> deploy from the GUI before as nothing really
happened, I thought it
>>>>>>>>> was a bug on the first 4.0 release ?
>>>>>>>>>
>>>>>>>>> I think this should be investigated, the whole
deployment as it would
>>>>>>>>> be good to have the possibility to list some GW's
in case you use
>>>>>>>>> failover.
>>>>>>>>>
>>>>>>>>> I was even thinking of setting the engine IP there,
should be working
>>>>>>>>> as good as also.
>>>>>>>>
>>>>>>>> Not really since the agent is pinging also when the
engine VM is down
>>>>>>>> due to maintenance.
>>>>>>>>
>>>>>>>>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi
<stirabos(a)redhat.com>:
>>>>>>>>>> On Thu, Jul 21, 2016 at 9:47 AM, Matt .
<yamakasi.014(a)gmail.com> wrote:
>>>>>>>>>>> OK, I already thought that but where is this
saved as I don't have any
>>>>>>>>>>> rights as root to the ha_agent folder on the
HE storage ?
>>>>>>>>>>
>>>>>>>>>> It's not a folder: it's a tar file
directly saved over a VDSM volume.
>>>>>>>>>> Editing it's a bit tricky.
>>>>>>>>>>
>>>>>>>>>>> In worst case scenario, how would i be able
to deploy a new hosted
>>>>>>>>>>> engine from a hosted engine ? This sounds
undoable to me and also
>>>>>>>>>>> unwanted as the HE is OK so far.
>>>>>>>>>>
>>>>>>>>>> With a 4.0 engine, when you choose to deploy a
new host from the
>>>>>>>>>> webadmin or from the rest API you can also choose
to deploy it as an
>>>>>>>>>> hosted-engine host if the engine has been
deployed with hosted-engine.
>>>>>>>>>> In this case, if I'm not wrong, you can also
specify a different gateway value.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi
<stirabos(a)redhat.com>:
>>>>>>>>>>>> On Thu, Jul 21, 2016 at 9:27 AM, Matt .
<yamakasi.014(a)gmail.com> wrote:
>>>>>>>>>>>>> Even when I change that on each host
before I do a new deploy it still
>>>>>>>>>>>>> uses the old GW address.
>>>>>>>>>>>>
>>>>>>>>>>>> If you deploy additional hosts with the
CLI utility, each new host
>>>>>>>>>>>> will be deployed consuming the answerfile
generated by the first host
>>>>>>>>>>>> and saved on the shared storage.
>>>>>>>>>>>> You have to manually tweak there if you
to avoid.
>>>>>>>>>>>>
>>>>>>>>>>>> Another smarted option is to deploy
additional HE host from the
>>>>>>>>>>>> webadmin interface.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> 2016-07-21 9:24 GMT+02:00 Simone
Tiraboschi <stirabos(a)redhat.com>:
>>>>>>>>>>>>>> On Wed, Jul 20, 2016 at 11:57 PM,
Matt . <yamakasi.014(a)gmail.com> wrote:
>>>>>>>>>>>>>>> OK, I tried to edit the
answerfiles on the other hosts to use another
>>>>>>>>>>>>>>> IP but it doesn't ping
and still uses the old GW address.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The gateway address is saved
under
>>>>>>>>>>>>>>
/etc/ovirt-hosted-engine/hosted-engine.conf
>>>>>>>>>>>>>> on each host.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2016-07-20 22:27 GMT+02:00
Matt . <yamakasi.014(a)gmail.com>:
>>>>>>>>>>>>>>>> Maybe it's a good
idea to be able to add multiple addresses it should
>>>>>>>>>>>>>>>> ping in order of
response.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 2016-07-20 22:13
GMT+02:00 Sandro Bonazzola <sbonazzo(a)redhat.com>:
>>>>>>>>>>>>>>>>> Il 20/Lug/2016 10:06
PM, "Matt ." <yamakasi.014(a)gmail.com> ha scritto:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I'm trying to
add a host to a HE installation but my gateway is not
>>>>>>>>>>>>>>>>>> pingable.
It's a floating IP which is usable but not pingable in this
>>>>>>>>>>>>>>>>>> case.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> During the first
install of the HE I could give any IP to ping and I
>>>>>>>>>>>>>>>>>> used a source IP
for the floating GW address.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> What can I do to
get around this as the network is OK, even when the
>>>>>>>>>>>>>>>>>> GW is not
pingable.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I think that gw not
pingable will be interpreted as network failure by the
>>>>>>>>>>>>>>>>> agent and will lower
the score of the hosts.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Any idea is
welcome!
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks!
>>>>>>>>>>>>>>>>>>
_______________________________________________
>>>>>>>>>>>>>>>>>> Users mailing
list
>>>>>>>>>>>>>>>>>> Users(a)ovirt.org
>>>>>>>>>>>>>>>>>>
http://lists.ovirt.org/mailman/listinfo/users