11:56 a.m.
Couple things...
1.). You created a drive correct? Just wanted to make sure you did add a
drive.
2.) Once you get to that window in the windows setup to choose your install
drive you need to go to your oVirt console and select "Change Disk" and
change it to the virtio iso that contains drivers.
Once you do this you need to "browse" and find the correct driver. The
drive won't show until you load the correct driver. After you do this the
drive shows. Select the drive and go back into the oVirt console and hit
"Change Disk" and choose the windows iso again and continue
https://youtu.be/Pasz-lv3gTY
Check out about 26:00 minutes.
On Sun, Nov 18, 2018, 11:35 AM <bardos.matyas(a)techcentral.hu wrote:
Dear Vincent,
Thank you for the quick support. Yes, i have connected the driver cd,
installed the drivers, but the disk is still not visible for windows.
Really strange is, that it doesn't matter, if I use scsi, or IDE (which
should work natively), nothing is visible in windows... :(
So i have no clue what is the problem. I have many virtual windows
guests in my other virtual platform (kvm) and there is everything
working fine.
> you have to mount the CD drive with the virtuio drivers during the
> setup process.
>
> get to the screen to select disks. do a "change cd" and mount the
> virtio ISO. then you have to go "have disk" in setup and add the
> drivers. Once the drivers are installed, you have to refresh the list
> before it will show the disks. once the disk is showing up then you do
> a change CD again back to the installation .iso.
>
> On Sat, Nov 17, 2018 at 3:28 PM <bardos.matyas(a)techcentral.hu> wrote:
>
>> Dear list,
>>
>> I am new in ovirt, and I have a problem, which I can’t solve with
>> google. I am not able to install windows guests, because they
>> can’t find they disk. I have already many linux guests running, so
>> generally everything is working fine. I try with virtio-scsi disks.
>> What I already tried:
>> - While the installation process I changed the disk to the virtio
>> driver disk (downloaded from fedora project), I try to load scsi
>> drivers, and windows still can’t find the disk
>> - I tried with virtio floppy (run once) but the floppy is not
>> visible in windows select menu
>> - I added the drivers to windows installer wim, but disks still not
>> visible
>> - I tried to add ide drive, but it is not visible either (I have
>> disabled virtio scsi under resource allocation too, without luck)
>> - tried windows 7 and 2016
>>
>> My nodes are: oVirt Node 4.2.1.1
>> I use local disks but via nfs, so i share the local disk via nfs.
>>
>> Do you have any idea what could I try. Any clue are welcome, because
>> I’m stuck…
>>
>> Thank you in advance!
>>
>> Regards!
>> _______________________________________________
>> Users mailing list -- users(a)ovirt.org
>> To unsubscribe send an email to users-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/727QXGFHKFA...
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6KQUX6TLEVN...