Hello, I'm still strugling with adding a nfs share from my synology share. When I log on to my node and do a pint to the synology server [root@ovirtnode005 ~]# ping -c 4 ovirtstorcl001.get.be PING ovirtstorcl001.get.be (192.168.203.199) 56(84) bytes of data. 64 bytes from ovirtstorcl001.get.be (192.168.203.199): icmp_seq=1 ttl=64 time=0.191 ms 64 bytes from ovirtstorcl001.get.be (192.168.203.199): icmp_seq=2 ttl=64 time=0.142 ms 64 bytes from ovirtstorcl001.get.be (192.168.203.199): icmp_seq=3 ttl=64 time=0.168 ms 64 bytes from ovirtstorcl001.get.be (192.168.203.199): icmp_seq=4 ttl=64 time=0.176 ms --- ovirtstorcl001.get.be ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3000ms rtt min/avg/max/mdev = 0.142/0.169/0.191/0.020 ms If I list the shares available on my synology server [root@ovirtnode005 ~]# showmount -e ovirtstorcl001.get.be Export list for ovirtstorcl001.get.be: /volume1/GETQUADATA001 * If I mount the nfs share [root@ovirtnode005 ~]# mkdir /mnt/nfs [root@ovirtnode005 ~]# mount -t nfs ovirtstorcl001.get.be:/volume1/GETQUADATA001 /mnt/nfs [root@ovirtnode005 ~]# ls -l /mnt/nfs total 0 drwxrwxrwx 1 vdsm kvm 22 Jun 27 15:26 #recycle [root@ovirtnode005 ~]# umount /mnt/nfs [root@ovirtnode005 ~]# ls -l /mnt/nfs total 0 [root@ovirtnode005 ~]# But when I Want to create a new nfs datadomain it tell's me I have issues with permissions Op vr 28 jun. 2019 om 19:29 schreef Andy Michielsen < andy.michielsen@gmail.com>:
Hello All,
Thank you for the replies.
I read the url and I think I did it all as discribed. I did a ssh into the synology and changed the owner and group for the volume I created and the folder I'm sharing with NFS. I did the the mounting test on the engine and also on the node. And I unmounted it afterwards.
But I will try and log on with the vdsm user. Have to look for the password and then I will try and mount again.
Kind regards.
Op vr 28 jun. 2019 om 16:35 schreef Staniforth, Paul < P.Staniforth@leedsbeckett.ac.uk>:
Are the user group and permissions set correctly vdsm:kvm?
The storage is mounted on the nodes not the engine.
have you unmounted the storage after your test?
Good Luck,
Paul S. ------------------------------ *From:* Andy Michielsen <andy.michielsen@gmail.com> *Sent:* 28 June 2019 14:12 *To:* users *Subject:* [ovirt-users] Using a synology as an nfs storage
Hello,
I'm setting up a 3 node cluster with the ovirtnode iso and a seperate server with the engine on and a synology for nfs storage.
I have done my configuration and I'm able to mount the share manually on the node with a command. Also on the server with the engine on I can mount it manually. But when I want to do it through the webinterface to add a data domain it say the permissions are wrong.
Any idea's on how to figure this out ?
Kind regards. To view the terms under which this email is distributed, please go to:- http://leedsbeckett.ac.uk/disclaimer/email/