Re: [ovirt-users] Network interface persistence
This discussion seems relevant:
https://access.redhat.com/discussions/916973
For my CentOS machines there are various alternatives described here
which should work, but what to do about my debian-based appliance where
I can't get access enough to edit such things? I then need to be able to
set up a consistent naming from the virtual bios.
If it matters the switch type used is OVS.
/Sverker
Den 2018-03-26 kl. 13:41, skrev Sverker Abrahamsson:
I have a number of vm's running under Ovirt 4.2, most are CentOS
7 and
one Debian. Issue is that when multiple network interfaces are
assigned they don't persist but it variates at boot which interface
will be which.
I've tried various methods, setting UUID and HWADDRESS in the ifcfg
file and a file /etc/udev/rules.d/70-persistent-net.rules file like
the below:
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="00:1a:4a:16:01:63", KERNEL=="eth*",
NAME="eth0"
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="00:1a:4a:16:01:6d", KERNEL=="eth*",
NAME="eth1"
I've also tried in the gui to change the network profile each virtual
card is attached, but even then the interfaces in vm will be oposide
of what I had intended.
How to accomplish with Ovirt to get network interface persistence? The
Debian vm is an appliance so I can't log in to it to change network
interfaces.
/Sverker
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users