6:20 p.m.
Unfortunately I get the same result when using CHAP.
Darran.
On 2016-05-05 23:06, Darran Carey wrote:
Hi Simone,
The output from the vdsClient command is:
[root@virt-host01 ~]# vdsClient -s 0 getVdsCaps | grep
ISCSIInitiatorName
ISCSIInitiatorName = 'iqn.2016-04.au.org.pawsey:initiator01'
The ACL on the PS4000 is as follows:
ID Initiator Ipaddress AuthMethod UserName
Apply-To
--- ----------------------------- --------------- ---------- ----------
--------
1 10.43.0.* none
both
which should allow access from any host in the 10.43.0 subnet. I
currently don't have CHAP configured. I will configure it and see if
that helps.
Regards,
Darran.
On 2016-05-05 21:14, Simone Tiraboschi wrote:
> On Thu, May 5, 2016 at 2:35 PM, Darran Carey
> <darran.carey(a)pawsey.org.au> wrote:
>> Hi Simone,
>>
>> Please find the log files attached. Thank you very much for taking
>> the time
>> to look at this problem.
>>
>> Regards,
>> Darran.
>
> Indeed VDSM is returning an empty device list:
>
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,409::task::595::Storage.TaskManager.Task::(_updateState)
> Task=`6e96b9df-b656-45bd-899b-c94ec9be5c52`::moving from state init ->
> state preparing
> Thread-17518::INFO::2016-05-05
> 16:05:05,410::logUtils::48::dispatcher::(wrapper) Run and protect:
> getDeviceList(storageType=3, guids=(), checkStatus=True, options={})
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,410::misc::750::Storage.SamplingMethod::(__call__) Trying to
> enter sampling method (storage.sdc.refreshStorage)
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,411::misc::753::Storage.SamplingMethod::(__call__) Got in to
> sampling method
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,411::misc::750::Storage.SamplingMethod::(__call__) Trying to
> enter sampling method (storage.iscsi.rescan)
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,411::misc::753::Storage.SamplingMethod::(__call__) Got in to
> sampling method
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,412::iscsi::434::Storage.ISCSI::(rescan) Performing SCSI
> scan, this will take up to 30 seconds
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,413::iscsiadm::97::Storage.Misc.excCmd::(_runCmd)
> /usr/bin/taskset --cpu-list 0-7 /usr/bin/sudo -n /sbin/iscsiadm -m
> session -R (cwd None)
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,463::misc::760::Storage.SamplingMethod::(__call__) Returning
> last result
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,464::misc::750::Storage.SamplingMethod::(__call__) Trying to
> enter sampling method (storage.hba.rescan)
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,464::misc::753::Storage.SamplingMethod::(__call__) Got in to
> sampling method
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,464::hba::56::Storage.HBA::(rescan) Starting scan
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,661::hba::62::Storage.HBA::(rescan) Scan finished
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,662::misc::760::Storage.SamplingMethod::(__call__) Returning
> last result
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,662::multipath::77::Storage.Misc.excCmd::(rescan)
> /usr/bin/taskset --cpu-list 0-7 /usr/bin/sudo -n /usr/sbin/multipath
> (cwd None)
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,747::multipath::77::Storage.Misc.excCmd::(rescan) SUCCESS:
> <err> = ''; <rc> = 0
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,748::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list
> 0-7 /sbin/udevadm settle --timeout=5 (cwd None)
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,768::utils::689::root::(execCmd) SUCCESS: <err> = '';
<rc> =
> 0
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,771::lvm::497::Storage.OperationMutex::(_invalidateAllPvs)
> Operation 'lvm invalidate operation' got the operation mutex
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,772::lvm::499::Storage.OperationMutex::(_invalidateAllPvs)
> Operation 'lvm invalidate operation' released the operation mutex
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,772::lvm::508::Storage.OperationMutex::(_invalidateAllVgs)
> Operation 'lvm invalidate operation' got the operation mutex
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,773::lvm::510::Storage.OperationMutex::(_invalidateAllVgs)
> Operation 'lvm invalidate operation' released the operation mutex
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,773::lvm::528::Storage.OperationMutex::(_invalidateAllLvs)
> Operation 'lvm invalidate operation' got the operation mutex
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,774::lvm::530::Storage.OperationMutex::(_invalidateAllLvs)
> Operation 'lvm invalidate operation' released the operation mutex
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,774::misc::760::Storage.SamplingMethod::(__call__) Returning
> last result
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,775::lvm::319::Storage.OperationMutex::(_reloadpvs) Operation
> 'lvm reload operation' got the operation mutex
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,777::lvm::290::Storage.Misc.excCmd::(cmd) /usr/bin/taskset
> --cpu-list 0-7 /usr/bin/sudo -n /usr/sbin/lvm pvs --config ' devices {
> preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1
> write_cache_state=0 disable_after_error_count=3 filter = [
> '\''r|.*|'\'' ] } global { locking_type=1
prioritise_write_locks=1
> wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50
> retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|'
> --ignoreskippedcluster -o
> uuid,name,size,vg_name,vg_uuid,pe_start,pe_count,pe_alloc_count,mda_count,dev_size
> (cwd None)
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,987::lvm::290::Storage.Misc.excCmd::(cmd) SUCCESS: <err> = '
> WARNING: lvmetad is running but disabled. Restart lvmetad before
> enabling it!\n'; <rc> = 0
> Thread-17518::DEBUG::2016-05-05
> 16:05:05,987::lvm::347::Storage.OperationMutex::(_reloadpvs) Operation
> 'lvm reload operation' released the operation mutex
> Thread-17518::DEBUG::2016-05-05
> 16:05:06,003::lvm::290::Storage.Misc.excCmd::(cmd) /usr/bin/taskset
> --cpu-list 0-7 /usr/bin/sudo -n /usr/sbin/lvm pvcreate --config '
> devices { preferred_names = ["^/dev/mapper/"]
> ignore_suspended_devices=1 write_cache_state=0
> disable_after_error_count=3 filter = [ '\''r|.*|'\'' ] }
global {
> locking_type=1 prioritise_write_locks=1 wait_for_locks=1
> use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --test
> --metadatasize 128m --metadatacopies 2 --metadataignore y (cwd None)
> Thread-17518::DEBUG::2016-05-05
> 16:05:06,054::lvm::290::Storage.Misc.excCmd::(cmd) FAILED: <err> = "
> WARNING: lvmetad is running but disabled. Restart lvmetad before
> enabling it!\n TEST MODE: Metadata will NOT be updated and volumes
> will not be (de)activated.\n Please enter a physical volume path.\n
> Run `pvcreate --help' for more information.\n"; <rc> = 3
> Thread-17518::DEBUG::2016-05-05
> 16:05:06,056::lvm::864::Storage.LVM::(testPVCreate) rc: 3, out: [],
> err: [' WARNING: lvmetad is running but disabled. Restart lvmetad
> before enabling it!', ' TEST MODE: Metadata will NOT be updated and
> volumes will not be (de)activated.', ' Please enter a physical volume
> path.', " Run `pvcreate --help' for more information."],
unusedDevs:
> set([]), usedDevs: set([])
> Thread-17518::INFO::2016-05-05
> 16:05:06,056::logUtils::51::dispatcher::(wrapper) Run and protect:
> getDeviceList, Return response: {'devList': []}
> Thread-17518::DEBUG::2016-05-05
> 16:05:06,057::task::1191::Storage.TaskManager.Task::(prepare)
> Task=`6e96b9df-b656-45bd-899b-c94ec9be5c52`::finished: {'devList': []}
> Thread-17518::DEBUG::2016-05-05
> 16:05:06,057::task::595::Storage.TaskManager.Task::(_updateState)
> Task=`6e96b9df-b656-45bd-899b-c94ec9be5c52`::moving from state
> preparing -> state finished
>
>
> You can check the initiator name used by VDSM with
> vdsClient -s 0 getVdsCaps | grep ISCSIInitiatorName
>
> Can you please check if you correctly configured ACLs for that
> initiator?
>
>
>> On 2016-05-05 17:06, Simone Tiraboschi wrote:
>>>
>>> On Thu, May 5, 2016 at 10:22 AM, Darran Carey
>>> <darran.carey(a)pawsey.org.au> wrote:
>>>>
>>>> Hi All,
>>>>
>>>> I am trying to install the hosted engine on an iscsi target but get
>>>> the
>>>> following error:
>>>>
>>>> [root@virt-host01 ~]# hosted-engine --deploy
>>>> ...
>>>> --== STORAGE CONFIGURATION ==--
>>>>
>>>> During customization use CTRL-D to abort.
>>>> Please specify the storage you would like to use
>>>> (glusterfs,
>>>> iscsi, fc, nfs3, nfs4)[nfs3]: iscsi
>>>> Please specify the iSCSI portal IP address: 10.43.0.100
>>>> Please specify the iSCSI portal port [3260]:
>>>> Please specify the iSCSI portal user:
>>>> Please specify the target name
>>>>
>>>>
(iqn.2001-05.com.equallogic:0-8a0906-8bb896109-6060000000b57145-iscsi-vol-01)
>>>>
>>>>
[iqn.2001-05.com.equallogic:0-8a0906-8bb896109-6060000000b57145-iscsi-vol-01]:
>>>> [ INFO ] Discovering iSCSI node
>>>> [ INFO ] Connecting to the storage server
>>>> [ INFO ] Discovering iSCSI node
>>>> [ INFO ] Connecting to the storage server
>>>> [ ERROR ] Failed to execute stage 'Environment customization':
>>>> Unable to
>>>> retrieve the list of LUN(s) please check the SELinux log and
>>>> settings on
>>>> your iscsi target
>>>>
>>>>
>>>> The relevant excerpt from the log file is:
>>>>
>>>> 2016-05-05 16:05:09 DEBUG otopi.context context._executeMethod:156
>>>> method
>>>> exception
>>>> Traceback (most recent call last):
>>>> File "/usr/lib/python2.7/site-packages/otopi/context.py",
line
>>>> 146, in
>>>> _executeMethod
>>>> method['method']()
>>>> File
>>>>
>>>>
"/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/blockd.py",
>>>> line 591, in _customization
>>>> lunGUID = self._customize_lun(self.domainType, target)
>>>> File
>>>>
>>>>
"/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/blockd.py",
>>>> line 209, in _customize_lun
>>>> iqn=target,
>>>> File
>>>>
>>>>
"/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/blockd.py",
>>>> line 374, in _iscsi_get_lun_list
>>>> raise RuntimeError("Unable to retrieve the list of LUN(s)
>>>> please "
>>>> RuntimeError: Unable to retrieve the list of LUN(s) please check
>>>> the
>>>> SELinux
>>>> log and settings on your iscsi target
>>>> 2016-05-05 16:05:09 ERROR otopi.context context._executeMethod:165
>>>> Failed
>>>> to
>>>> execute stage 'Environment customization': Unable to retrieve the
>>>> list of
>>>> LUN(s) please check the SELinux log and settings on your iscsi
>>>> target
>>>
>>>
>>> Can you please attach the whole hosted-engine-setup log file and
>>> vdsm
>>> logs?
>>>
>>>> This is on CentOS 7 with ovirt 3.6.
>>>> selinux is disabled.
>>>>
>>>> I can mount the iscsi target fine using iscsiadm or the Dell
>>>> Equallogic
>>>> Host
>>>> Integration Toolkit commands.
>>>>
>>>> I think the first problem is the call to self.cli.getDeviceList in
>>>> blockd.py
>>>> is returning an empty list, but I don't know what that function is
>>>> actually
>>>> doing.
>>>>
>>>> Has anyone experienced similar behaviour or has any suggestions as
>>>> to
>>>> what I
>>>> should check next?
>>>>
>>>> Thanks,
>>>> Darran.
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users