Re: [Users] [rhev 3] add new domain fails: Could not retrieve LUNs

I was going to reply.. :) It looks like it halts after an error due to cciss!c0d1, which btw is displayed by multipath -ll. That's just a local disk, isn't it? So it shouldn't even be listed. I may have attached it by mistake, playing with /sys/class/fc_* tools. So, if I remove that path, everything should go ok. Do you think so too?

> it appears that vdsm fails to handle a device with '!' in it > (cciss!c0d1), but let's make sure its indeed the case More than that the fact is that the path scsi_disk/ doesn't exist in /sys/block/cciss!c0d1/device And this must be due to the fact that c0d1 is NOT a damn scsi disk Anyway, here is your output [root@pittor06vhxd020 ~]# ls -l /sys/block/ total 0 lrwxrwxrwx. 1 root root 0 2007-06-30 00:37 cciss!c0d0 -> ../devices/pci0000:00/0000:00:03.0/0000:06:00.0/cciss0/c0d0/block/ccis s!c0d0 lrwxrwxrwx. 1 root root 0 2007-06-30 00:32 cciss!c0d1 -> ../devices/pci0000:00/0000:00:03.0/0000:06:00.0/cciss0/c0d1/block/ccis s!c0d1 lrwxrwxrwx. 1 root root 0 2007-06-30 01:17 dm-0 -> ../devices/virtual/block/dm-0 lrwxrwxrwx. 1 root root 0 2007-06-30 00:40 dm-1 -> ../devices/virtual/block/dm-1 lrwxrwxrwx. 1 root root 0 2007-06-30 01:17 dm-2 -> ../devices/virtual/block/dm-2 lrwxrwxrwx. 1 root root 0 2007-06-30 00:49 dm-3 -> ../devices/virtual/block/dm-3 lrwxrwxrwx. 1 root root 0 2007-06-30 00:49 dm-4 -> ../devices/virtual/block/dm-4 lrwxrwxrwx. 1 root root 0 2007-06-30 01:00 dm-5 -> ../devices/virtual/block/dm-5 lrwxrwxrwx. 1 root root 0 2007-06-30 00:49 dm-6 -> ../devices/virtual/block/dm-6 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 loop0 -> ../devices/virtual/block/loop0 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 loop1 -> ../devices/virtual/block/loop1 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 loop2 -> ../devices/virtual/block/loop2 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 loop3 -> ../devices/virtual/block/loop3 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 loop4 -> ../devices/virtual/block/loop4 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 loop5 -> ../devices/virtual/block/loop5 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 loop6 -> ../devices/virtual/block/loop6 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 loop7 -> ../devices/virtual/block/loop7 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram0 -> ../devices/virtual/block/ram0 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram1 -> ../devices/virtual/block/ram1 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram10 -> ../devices/virtual/block/ram10 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram11 -> ../devices/virtual/block/ram11 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram12 -> ../devices/virtual/block/ram12 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram13 -> ../devices/virtual/block/ram13 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram14 -> ../devices/virtual/block/ram14 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram15 -> ../devices/virtual/block/ram15 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram2 -> ../devices/virtual/block/ram2 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram3 -> ../devices/virtual/block/ram3 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram4 -> ../devices/virtual/block/ram4 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram5 -> ../devices/virtual/block/ram5 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram6 -> ../devices/virtual/block/ram6 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram7 -> ../devices/virtual/block/ram7 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram8 -> ../devices/virtual/block/ram8 lrwxrwxrwx. 1 root root 0 2007-06-30 00:10 ram9 -> ../devices/virtual/block/ram9 lrwxrwxrwx. 1 root root 0 2007-06-30 00:36 sda -> ../devices/pci0000:00/0000:00:02.0/0000:09:00.0/0000:0a:00.0/0000:0b:0 0.0/host2/rport-2:0-0/target2:0:0/2:0:0:0/block/sda lrwxrwxrwx. 1 root root 0 2007-06-29 18:59 sdb -> ../devices/pci0000:00/0000:00:02.0/0000:09:00.0/0000:0a:00.0/0000:0b:0 0.0/host2/rport-2:0-2/target2:0:2/2:0:2:0/block/sdb lrwxrwxrwx. 1 root root 0 2007-06-29 18:59 sdc -> ../devices/pci0000:00/0000:00:02.0/0000:09:00.0/0000:0a:00.0/0000:0b:0 0.0/host2/rport-2:0-3/target2:0:3/2:0:3:0/block/sdc lrwxrwxrwx. 1 root root 0 2007-06-29 18:59 sdd -> ../devices/pci0000:00/0000:00:02.0/0000:09:00.0/0000:0a:00.0/0000:0b:0 0.0/host2/rport-2:0-1/target2:0:1/2:0:1:0/block/sdd lrwxrwxrwx. 1 root root 0 2007-06-29 18:59 sde -> ../devices/pci0000:00/0000:00:02.0/0000:09:00.0/0000:0a:00.0/0000:0b:0 0.1/host3/rport-3:0-0/target3:0:0/3:0:0:0/block/sde lrwxrwxrwx. 1 root root 0 2007-06-29 18:59 sdf -> ../devices/pci0000:00/0000:00:02.0/0000:09:00.0/0000:0a:00.0/0000:0b:0 0.1/host3/rport-3:0-1/target3:0:1/3:0:1:0/block/sdf lrwxrwxrwx. 1 root root 0 2007-06-29 18:59 sdg -> ../devices/pci0000:00/0000:00:02.0/0000:09:00.0/0000:0a:00.0/0000:0b:0 0.1/host3/rport-3:0-2/target3:0:2/3:0:2:0/block/sdg lrwxrwxrwx. 1 root root 0 2007-06-29 18:59 sdh -> ../devices/pci0000:00/0000:00:02.0/0000:09:00.0/0000:0a:00.0/0000:0b:0 0.1/host3/rport-3:0-3/target3:0:3/3:0:3:0/block/sdh lrwxrwxrwx. 1 root root 0 2007-06-30 00:49 sr0 -> ../devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0 [root@pittor06vhxd020 ~]# dmsetup table 3600601601cde1d0066b2fb054dece111: 0 1363148800 multipath 1 queue_if_no_path 1 emc 2 1 round-robin 0 4 1 8:0 1 8:48 1 8:64 1 8:80 1 round-robin 0 4 1 8:16 1 8:32 1 8:96 1 8:112 1 HostVG-Logging: 0 4194304 linear 104:4 24741888 HostVG-Swap: 0 24723456 linear 104:4 2048 3600508b1001035333920202020200005: 0 429925920 multipath 1 queue_if_no_path 0 1 1 round-robin 0 1 1 104:16 1 HostVG-Data: 0 40624128 linear 104:4 28936192 HostVG-Config: 0 16384 linear 104:4 24725504 live-rw: 0 2097152 snapshot 7:1 7:2 P 8 [root@pittor06vhxd020 ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop0 7:0 0 99.3M 1 loop loop1 7:1 0 1G 1 loop ââlive-rw (dm-1) 253:1 0 1G 0 dm / loop2 7:2 0 512M 0 loop ââlive-rw (dm-1) 253:1 0 1G 0 dm / cciss!c0d0 104:0 0 33.9G 0 disk ââcciss!c0d0p1 104:1 0 243M 0 part ââcciss!c0d0p2 104:2 0 244M 0 part ââcciss!c0d0p3 104:3 0 244M 0 part ââcciss!c0d0p4 104:4 0 33.2G 0 part ââHostVG-Swap (dm-3) 253:3 0 11.8G 0 lvm [SWAP] ââHostVG-Config (dm-4) 253:4 0 8M 0 lvm /config ââHostVG-Logging (dm-5) 253:5 0 2G 0 lvm /var/log ââHostVG-Data (dm-6) 253:6 0 19.4G 0 lvm /data cciss!c0d1 104:16 0 205G 0 disk ââ3600508b1001035333920202020200005 (dm-0) 253:0 0 205G 0 mpath sr0 11:0 1 1024M 0 rom sdb 8:16 0 650G 0 disk ââ3600601601cde1d0066b2fb054dece111 (dm-2) 253:2 0 650G 0 mpath sda 8:0 0 650G 0 disk ââ3600601601cde1d0066b2fb054dece111 (dm-2) 253:2 0 650G 0 mpath sdc 8:32 0 650G 0 disk ââ3600601601cde1d0066b2fb054dece111 (dm-2) 253:2 0 650G 0 mpath sdd 8:48 0 650G 0 disk ââ3600601601cde1d0066b2fb054dece111 (dm-2) 253:2 0 650G 0 mpath sde 8:64 0 650G 0 disk ââ3600601601cde1d0066b2fb054dece111 (dm-2) 253:2 0 650G 0 mpath sdf 8:80 0 650G 0 disk ââ3600601601cde1d0066b2fb054dece111 (dm-2) 253:2 0 650G 0 mpath sdg 8:96 0 650G 0 disk ââ3600601601cde1d0066b2fb054dece111 (dm-2) 253:2 0 650G 0 mpath sdh 8:112 0 650G 0 disk ââ3600601601cde1d0066b2fb054dece111 (dm-2) 253:2 0 650G 0 mpath Alberto Scotto Blue Reply Via Cardinal Massaia, 83 10147 - Torino - ITALY phone: +39 011 29100 al.scotto(a)reply.it www.reply.it -----Original Message----- From: Haim [mailto:hateya@redhat.com] Sent: giovedì 23 agosto 2012 18:01 To: Scotto Alberto Cc: users(a)ovirt.org Subject: Re: [Users] [rhev 3] add new domain fails: Could not retrieve LUNs On 08/23/2012 06:20 PM, Scotto Alberto wrote: > Here you are thanks, can you run the following? - ls -l /sys/block/ - dmsetup table - lsblk (if exists) it appears that vdsm fails to handle a device with '!' in it (cciss!c0d1), but let's make sure its indeed the case. > > Thread-47346::DEBUG::2007-06-30 > 00:37:10,268::clientIF::239::Storage.Dispatcher.Protect::(wrapper) > [10.16.250.216] > Thread-47346::INFO::2007-06-30 > 00:37:10,269::dispatcher::94::Storage.Dispatcher.Protect::(run) Run > and protect: getDeviceList, args: () > Thread-47346::DEBUG::2007-06-30 > 00:37:10,269::task::495::TaskManager.Task::(_debug) Task > 0be1d461-f8fa-4c20-861d-27fde8124408: moving from state init -> state > preparing > Thread-47346::DEBUG::2007-06-30 > 00:37:10,269::misc::1010::SamplingMethod::(__call__) Trying to enter > sampling method (storage.sdc.refreshStorage) > Thread-47346::DEBUG::2007-06-30 > 00:37:10,270::misc::1012::SamplingMethod::(__call__) Got in to > sampling method > Thread-47346::DEBUG::2007-06-30 > 00:37:10,270::misc::1010::SamplingMethod::(__call__) Trying to enter > sampling method (storage.iscsi.rescan) > Thread-47346::DEBUG::2007-06-30 > 00:37:10,270::misc::1012::SamplingMethod::(__call__) Got in to > sampling method > Thread-47346::DEBUG::2007-06-30 > 00:37:10,271::iscsi::699::Storage.Misc.excCmd::(rescan) > '/usr/bin/sudo -n /sbin/iscsiadm -m session -R' (cwd None) > Thread-47346::DEBUG::2007-06-30 > 00:37:10,300::iscsi::699::Storage.Misc.excCmd::(rescan) FAILED: <err> > = 'iscsiadm: No session found.\n'; <rc> = 21 > Thread-47346::DEBUG::2007-06-30 > 00:37:10,301::misc::1020::SamplingMethod::(__call__) Returning last > result > Thread-47346::DEBUG::2007-06-30 > 00:37:10,661::multipath::61::Storage.Misc.excCmd::(rescan) > '/usr/bin/sudo -n /sbin/multipath' (cwd None) > Thread-47346::DEBUG::2007-06-30 > 00:37:10,785::multipath::61::Storage.Misc.excCmd::(rescan) SUCCESS: > <err> = ''; <rc> = 0 > Thread-47346::DEBUG::2007-06-30 > 00:37:10,786::lvm::547::OperationMutex::(_invalidateAllPvs) Operation > 'lvm invalidate operation' got the operation mutex > Thread-47346::DEBUG::2007-06-30 > 00:37:10,786::lvm::549::OperationMutex::(_invalidateAllPvs) Operation > 'lvm invalidate operation' released the operation mutex > Thread-47346::DEBUG::2007-06-30 > 00:37:10,786::lvm::559::OperationMutex::(_invalidateAllVgs) Operation > 'lvm invalidate operation' got the operation mutex > Thread-47346::DEBUG::2007-06-30 > 00:37:10,787::lvm::561::OperationMutex::(_invalidateAllVgs) Operation > 'lvm invalidate operation' released the operation mutex > Thread-47346::DEBUG::2007-06-30 > 00:37:10,787::lvm::580::OperationMutex::(_invalidateAllLvs) Operation > 'lvm invalidate operation' got the operation mutex > Thread-47346::DEBUG::2007-06-30 > 00:37:10,788::lvm::582::OperationMutex::(_invalidateAllLvs) Operation > 'lvm invalidate operation' released the operation mutex > Thread-47346::DEBUG::2007-06-30 > 00:37:10,788::misc::1020::SamplingMethod::(__call__) Returning last > result > Thread-47346::DEBUG::2007-06-30 > 00:37:10,788::lvm::406::OperationMutex::(_reloadpvs) Operation 'lvm > reload operation' got the operation mutex > Thread-47346::DEBUG::2007-06-30 > 00:37:10,791::lvm::374::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo -n > /sbin/lvm pvs --config " devices { preferred_names = > [\\"^/dev/mapper/\\"] ignore_suspended_devices=1 write_cache_state=0 > disable_after_error_count=3 filter = [ > \\"a%3600508b1001035333920202020200005|3600601601cde1d0066b2fb054dece > 1 11%\\", \\"r%.*%\\" ] } global { locking_type=1 > prioritise_write_locks=1 wait_for_locks=1 } backup { retain_min = > 50 retain_days = 0 } " --noheadings --units b --nosuffix --separator > | -o > uuid,name,size,vg_name,vg_uuid,pe_start,pe_count,pe_alloc_count,mda_c > o > unt,dev_size' (cwd None) > Thread-47346::DEBUG::2007-06-30 > 00:37:10,997::lvm::374::Storage.Misc.excCmd::(cmd) SUCCESS: <err> = ' > /dev/sdh: read failed after 0 of 4096 at 0: Input/output error\n > /dev/sdh: read failed after 0 of 4096 at 697932120064: Input/output > error\n /dev/sdh: read failed after 0 of 4096 at 697932177408: > Input/output error\n WARNING: Error counts reached a limit of 3. > Device /dev/sdh was disabled\n'; <rc> = 0 > Thread-47346::DEBUG::2007-06-30 > 00:37:10,998::lvm::429::OperationMutex::(_reloadpvs) Operation 'lvm > reload operation' released the operation mutex > MainProcess|Thread-47346::DEBUG::2007-06-30 > MainProcess|00:37:11,005::devicemapper::144::Storage.Misc.excCmd::(_g > MainProcess|e > MainProcess|tPathsStatus) '/sbin/dmsetup status' (cwd None) > MainProcess|Thread-47346::DEBUG::2007-06-30 > MainProcess|00:37:11,014::devicemapper::144::Storage.Misc.excCmd::(_g > MainProcess|e > MainProcess|tPathsStatus) SUCCESS: <err> = ''; <rc> = 0 > MainProcess|Thread-47346::DEBUG::2007-06-30 > MainProcess|00:37:11,019::multipath::159::Storage.Misc.excCmd::(getSc > MainProcess|s > MainProcess|iSerial) '/sbin/scsi_id --page=0x80 --whitelisted > MainProcess|--export --replace-whitespace --device=/dev/dm-0' (cwd > MainProcess|None) > MainProcess|Thread-47346::DEBUG::2007-06-30 > MainProcess|00:37:11,026::multipath::159::Storage.Misc.excCmd::(getSc > MainProcess|s > MainProcess|iSerial) SUCCESS: <err> = ''; <rc> = 0 > Thread-47346::WARNING::2007-06-30 > 00:37:11,027::multipath::261::Storage.Multipath::(pathListIter) Problem getting hbtl from device `cciss!c0d1` Traceback (most recent call last): > File "/usr/share/vdsm/storage/multipath.py", line 259, in pathListIter > File "/usr/share/vdsm/storage/multipath.py", line 182, in getHBTL > OSError: [Errno 2] No such file or directory: '/sys/block/cciss!c0d1/device/scsi_disk/' > Thread-47346::ERROR::2007-06-30 > 00:37:11,029::task::868::TaskManager.Task::(_setError) Unexpected error Traceback (most recent call last): > File "/usr/share/vdsm/storage/task.py", line 876, in _run > File "/usr/share/vdsm/storage/hsm.py", line 696, in public_getDeviceList > File "/usr/share/vdsm/storage/hsm.py", line 759, in > _getDeviceList > KeyError: 'hbtl' > Thread-47346::DEBUG::2007-06-30 > 00:37:11,030::task::495::TaskManager.Task::(_debug) Task > 0be1d461-f8fa-4c20-861d-27fde8124408: Task._run: > 0be1d461-f8fa-4c20-861d-27fde8124408 () {} failed - stopping task > Thread-47346::DEBUG::2007-06-30 > 00:37:11,030::task::495::TaskManager.Task::(_debug) Task > 0be1d461-f8fa-4c20-861d-27fde8124408: stopping in state preparing > (force False) > Thread-47346::DEBUG::2007-06-30 > 00:37:11,030::task::495::TaskManager.Task::(_debug) Task > 0be1d461-f8fa-4c20-861d-27fde8124408: ref 1 aborting True > Thread-47346::INFO::2007-06-30 > 00:37:11,031::task::1171::TaskManager.Task::(prepare) aborting: Task > is aborted: "'hbtl'" - code 100 > Thread-47346::DEBUG::2007-06-30 00:37:11,031::task::495::TaskManager.Task::(_debug) Task 0be1d461-f8fa-4c20-861d-27fde8124408: Prepare: aborted: 'hbtl' > Thread-47346::DEBUG::2007-06-30 > 00:37:11,031::task::495::TaskManager.Task::(_debug) Task > 0be1d461-f8fa-4c20-861d-27fde8124408: ref 0 aborting True > Thread-47346::DEBUG::2007-06-30 > 00:37:11,032::task::495::TaskManager.Task::(_debug) Task > 0be1d461-f8fa-4c20-861d-27fde8124408: Task._doAbort: force False > Thread-47346::DEBUG::2007-06-30 > 00:37:11,032::resourceManager::821::ResourceManager.Owner::(cancelAll > ) > Owner.cancelAll requests {} > Thread-47346::DEBUG::2007-06-30 > 00:37:11,032::task::495::TaskManager.Task::(_debug) Task > 0be1d461-f8fa-4c20-861d-27fde8124408: moving from state preparing -> > state aborting > Thread-47346::DEBUG::2007-06-30 > 00:37:11,033::task::495::TaskManager.Task::(_debug) Task > 0be1d461-f8fa-4c20-861d-27fde8124408: _aborting: recover policy none > Thread-47346::DEBUG::2007-06-30 > 00:37:11,033::task::495::TaskManager.Task::(_debug) Task > 0be1d461-f8fa-4c20-861d-27fde8124408: moving from state aborting -> > state failed > Thread-47346::DEBUG::2007-06-30 > 00:37:11,033::resourceManager::786::ResourceManager.Owner::(releaseAl > l > ) Owner.releaseAll requests {} resources {} > Thread-47346::DEBUG::2007-06-30 > 00:37:11,034::resourceManager::821::ResourceManager.Owner::(cancelAll > ) > Owner.cancelAll requests {} > Thread-47346::ERROR::2007-06-30 00:37:11,034::dispatcher::106::Storage.Dispatcher.Protect::(run) 'hbtl' > Thread-47346::ERROR::2007-06-30 00:37:11,034::dispatcher::107::Storage.Dispatcher.Protect::(run) Traceback (most recent call last): > File "/usr/share/vdsm/storage/dispatcher.py", line 96, in run > File "/usr/share/vdsm/storage/task.py", line 1178, in prepare > KeyError: 'hbtl' > > > > > > > > Alberto Scotto > > Blue Reply > Via Cardinal Massaia, 83 > 10147 - Torino - ITALY > phone: +39 011 29100 > al.scotto(a)reply.it > www.reply.it > > -----Original Message----- > From: Haim [mailto:hateya@redhat.com] > Sent: giovedì 23 agosto 2012 17:00 > To: Scotto Alberto > Cc: users(a)ovirt.org > Subject: Re: [Users] [rhev 3] add new domain fails: Could not > retrieve LUNs > > On 08/23/2012 05:54 PM, Scotto Alberto wrote: > > hi, > > can you attach full vdsm log during the execution of getDeviceList command? >> Hi all, >> >> I'm trying to configure a FCP storage domain on RHEV 3. >> >> I try to add a new domain from the console, but it can't find any >> LUNs: "Could not retrieve LUNs, please check your storage" >> >> Here is the output from /var/log/rhevm/rhevm.log: >> >> ------------------------------------ >> >> 2007-06-29 21:50:07,811 WARN >> [org.ovirt.engine.core.bll.GetConfigurationValueQuery] >> (http-0.0.0.0-8443-1) calling GetConfigurationValueQuery with null >> version, using default general for version >> 2007-06-29 21:50:07,911 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand] >> (http-0.0.0.0-8443-1) START, GetDeviceListVDSCommand(vdsId = >> 7e077f4c-25d8-11dc-bbcb-001cc4c2469a, storageType=FCP), log id: >> 60bdafe6 >> 2007-06-29 21:50:08,726 ERROR >> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] >> (http-0.0.0.0-8443-1) Failed in GetDeviceListVDS method >> 2007-06-29 21:50:08,727 ERROR >> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] >> (http-0.0.0.0-8443-1) Error code BlockDeviceActionError and error >> message VDSGenericException: VDSErrorException: Failed to >> GetDeviceListVDS, error = Error block device action: () >> 2007-06-29 21:50:08,727 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] >> (http-0.0.0.0-8443-1) Command >> org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand >> return value >> >> Class Name: >> org.ovirt.engine.core.vdsbroker.vdsbroker.LUNListReturnForXmlRpc >> lunList Null >> mStatus Class Name: >> org.ovirt.engine.core.vdsbroker.vdsbroker.StatusForXmlRpc >> mCode 600 >> mMessage Error block device action: () >> >> 2007-06-29 21:50:08,727 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] >> (http-0.0.0.0-8443-1) Vds: pittor06vhxd020 >> 2007-06-29 21:50:08,727 ERROR >> [org.ovirt.engine.core.vdsbroker.VDSCommandBase] >> (http-0.0.0.0-8443-1) Command GetDeviceListVDS execution failed. Exception: >> VDSErrorException: VDSGenericException: VDSErrorException: Failed to >> GetDeviceListVDS, error = Error block device action: () >> 2007-06-29 21:50:08,727 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand] >> (http-0.0.0.0-8443-1) FINISH, GetDeviceListVDSCommand, log id: >> 60bdafe6 >> 2007-06-29 21:50:08,727 ERROR >> [org.ovirt.engine.core.bll.storage.GetDeviceListQuery] >> (http-0.0.0.0-8443-1) Query GetDeviceListQuery failed. Exception >> message is VdcBLLException: >> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: >> VDSGenericException: VDSErrorException: Failed to GetDeviceListVDS, >> error = Error block device action: () >> >> ---------------------------------------------- >> >> First question: do LUNs have to be visible from RHEV-H or RHEV-M? >> >> Currently they are visible only from the hypervisor. >> >> ---------------------------------------- >> >> [root@pittor06vhxd020 log]# multipath -ll >> 3600601601cde1d0066b2fb054dece111 dm-2 DGC,RAID 5 size=650G >> features='1 queue_if_no_path' hwhandler='1 emc' wp=rw >> |-+- policy='round-robin 0' prio=1 status=active >> | |- 2:0:0:0 sda 8:0 active ready running >> | |- 2:0:1:0 sdd 8:48 active ready running >> | |- 3:0:0:0 sde 8:64 active ready running >> | `- 3:0:1:0 sdf 8:80 active ready running >> `-+- policy='round-robin 0' prio=0 status=enabled >> |- 2:0:2:0 sdb 8:16 active ready running >> |- 2:0:3:0 sdc 8:32 active ready running >> |- 3:0:2:0 sdg 8:96 active ready running >> `- 3:0:3:0 sdh 8:112 active ready running >> 3600508b1001035333920202020200005 dm-0 HP,LOGICAL VOLUME size=205G >> features='1 queue_if_no_path' hwhandler='0' wp=rw >> `-+- policy='round-robin 0' prio=1 status=active >> `- 0:0:1:0 cciss!c0d1 104:16 active ready running >> ------------------------------------------------------ >> >> Our SAN device is Clariion AX150. Is it compatible with ovirt? >> >> vdsClient -s 0 getDeviceListgives me: >> >> Error block device action: () >> >> Could it be due to SPM turned off? (I have only one host) >> >> [root@pittor06vhxd020 log]# ps axu | grep -i spm >> >> root 16068 0.0 0.0 7888 868 pts/1 R+ 00:04 0:00 grep -i spm >> >> How can I turn it on? I know the command but I don't know what >> paramaters append >> >> spmStart >> >> <spUUID> <prevID> <prevLVER> <recoveryMode> <scsiFencing> >> <maxHostID> <version> >> >> Thank you very much for any hints. >> >> AS >> >> >> >> Alberto Scotto >> >> Blue >> Via Cardinal Massaia, 83 >> 10147 - Torino - ITALY >> phone: +39 011 29100 >> al.scotto(a)reply.it >> www.reply.it >> >> >> -------------------------------------------------------------------- >> - >> - >> -- >> >> -- >> The information transmitted is intended for the person or entity to >> which it is addressed and may contain confidential and/or privileged >> material. Any review, retransmission, dissemination or other use of, >> or taking of any action in reliance upon, this information by >> persons or entities other than the intended recipient is prohibited. >> If you received this in error, please contact the sender and delete >> the material from any computer. >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > > ________________________________ > > -- > The information transmitted is intended for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. ________________________________ -- The information transmitted is intended for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.