10:13 a.m.
Any more info. on this issue?
On Thu, May 30, 2013 at 9:10 AM, Ryan Wilkinson <ryanwilk(a)gmail.com> wrote:
I didn't install double. The one package was the version on the
FC17 box
and the other was FC18 box.
On Thu, May 30, 2013 at 9:08 AM, Hans de Goede <hdegoede(a)redhat.com>wrote:
> Hi,
>
>
> On 05/30/2013 04:34 PM, Ryan Wilkinson wrote:
>
>> Yes, I can manually pass it through. Not necessarily looking to use
>> this specific device (usb wifi adaptor) but was just handy. Here is the
>> output:
>>
>
> Hmm, that should work.
>
> I just noticed that in your last mail you mentioned that you've
> virt-viewer installed
> "double".
>
> Can you try doing:
>
> rpm -e --allmatches virt-viewer
> yum install virt-viewer
>
> And see if that fixes things ?
>
> Regards,
>
> Hans
>
>
>
>
>> Bus 001 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU
>> 802.11n WLAN Adapter
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 2.00
>> bDeviceClass 0 (Defined at Interface level)
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 64
>> idVendor 0x0bda Realtek Semiconductor Corp.
>> idProduct 0x8172 RTL8191SU 802.11n WLAN Adapter
>> bcdDevice 2.00
>> iManufacturer 1 Manufacturer Realtek
>> iProduct 2 RTL8191S WLAN Adapter
>> iSerial 3 00e04c000001
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 46
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0x80
>> (Bus Powered)
>> MaxPower 500mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 4
>> bInterfaceClass 255 Vendor Specific Class
>> bInterfaceSubClass 255 Vendor Specific Subclass
>> bInterfaceProtocol 255 Vendor Specific Protocol
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x83 EP 3 IN
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x04 EP 4 OUT
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x06 EP 6 OUT
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x0d EP 13 OUT
>> bmAttributes 2
>> Transfer Type Bulk
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0200 1x 512 bytes
>> bInterval 0
>> Device Qualifier (for other device speed):
>> bLength 10
>> bDescriptorType 6
>> bcdUSB 2.00
>> bDeviceClass 0 (Defined at Interface level)
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 64
>> bNumConfigurations 1
>> Device Status: 0x0000
>> (Bus Powered)
>>
>> Bus 005 Device 002: ID 2101:020f ActionStar
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 1.00
>> bDeviceClass 0 (Defined at Interface level)
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 8
>> idVendor 0x2101 ActionStar
>> idProduct 0x020f
>> bcdDevice 0.01
>> iManufacturer 0
>> iProduct 0
>> iSerial 0
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 59
>> bNumInterfaces 2
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0xa0
>> (Bus Powered)
>> Remote Wakeup
>> MaxPower 500mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 1
>> bInterfaceClass 3 Human Interface Device
>> bInterfaceSubClass 1 Boot Interface Subclass
>> bInterfaceProtocol 1 Keyboard
>> iInterface 0
>> HID Device Descriptor:
>> bLength 9
>> bDescriptorType 33
>> bcdHID 1.01
>> bCountryCode 0 Not supported
>> bNumDescriptors 1
>> bDescriptorType 34 Report
>> wDescriptorLength 63
>> Report Descriptors:
>> ** UNAVAILABLE **
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x81 EP 1 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0008 1x 8 bytes
>> bInterval 10
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 1
>> bAlternateSetting 0
>> bNumEndpoints 1
>> bInterfaceClass 3 Human Interface Device
>> bInterfaceSubClass 1 Boot Interface Subclass
>> bInterfaceProtocol 2 Mouse
>> iInterface 0
>> HID Device Descriptor:
>> bLength 9
>> bDescriptorType 33
>> bcdHID 1.01
>> bCountryCode 0 Not supported
>> bNumDescriptors 1
>> bDescriptorType 34 Report
>> wDescriptorLength 72
>> Report Descriptors:
>> ** UNAVAILABLE **
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x82 EP 2 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0008 1x 8 bytes
>> bInterval 10
>> Device Status: 0x0002
>> (Bus Powered)
>> Remote Wakeup Enabled
>>
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 2.00
>> bDeviceClass 9 Hub
>> bDeviceSubClass 0 Unused
>> bDeviceProtocol 0 Full speed (or root) hub
>> bMaxPacketSize0 64
>> idVendor 0x1d6b Linux Foundation
>> idProduct 0x0002 2.0 root hub
>> bcdDevice 3.06
>> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 ehci_hcd
>> iProduct 2 EHCI Host Controller
>> iSerial 1 0000:00:1d.7
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 25
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0xe0
>> Self Powered
>> Remote Wakeup
>> MaxPower 0mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 1
>> bInterfaceClass 9 Hub
>> bInterfaceSubClass 0 Unused
>> bInterfaceProtocol 0 Full speed (or root) hub
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x81 EP 1 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0004 1x 4 bytes
>> bInterval 12
>> Hub Descriptor:
>> bLength 11
>> bDescriptorType 41
>> nNbrPorts 8
>> wHubCharacteristic 0x000a
>> No power switching (usb 1.0)
>> Per-port overcurrent protection
>> bPwrOn2PwrGood 10 * 2 milli seconds
>> bHubContrCurrent 0 milli Ampere
>> DeviceRemovable 0x00 0x00
>> PortPwrCtrlMask 0xff 0xff
>> Hub Port Status:
>> Port 1: 0000.0100 power
>> Port 2: 0000.0100 power
>> Port 3: 0000.0100 power
>> Port 4: 0000.0100 power
>> Port 5: 0000.0100 power
>> Port 6: 0000.0503 highspeed power enable connect
>> Port 7: 0000.0100 power
>> Port 8: 0000.0100 power
>> Device Status: 0x0001
>> Self Powered
>>
>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 1.10
>> bDeviceClass 9 Hub
>> bDeviceSubClass 0 Unused
>> bDeviceProtocol 0 Full speed (or root) hub
>> bMaxPacketSize0 64
>> idVendor 0x1d6b Linux Foundation
>> idProduct 0x0001 1.1 root hub
>> bcdDevice 3.06
>> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd
>> iProduct 2 UHCI Host Controller
>> iSerial 1 0000:00:1d.0
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 25
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0xe0
>> Self Powered
>> Remote Wakeup
>> MaxPower 0mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 1
>> bInterfaceClass 9 Hub
>> bInterfaceSubClass 0 Unused
>> bInterfaceProtocol 0 Full speed (or root) hub
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x81 EP 1 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0002 1x 2 bytes
>> bInterval 255
>> Hub Descriptor:
>> bLength 9
>> bDescriptorType 41
>> nNbrPorts 2
>> wHubCharacteristic 0x000a
>> No power switching (usb 1.0)
>> Per-port overcurrent protection
>> bPwrOn2PwrGood 1 * 2 milli seconds
>> bHubContrCurrent 0 milli Ampere
>> DeviceRemovable 0x00
>> PortPwrCtrlMask 0xff
>> Hub Port Status:
>> Port 1: 0000.0100 power
>> Port 2: 0000.0100 power
>> Device Status: 0x0001
>> Self Powered
>>
>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 1.10
>> bDeviceClass 9 Hub
>> bDeviceSubClass 0 Unused
>> bDeviceProtocol 0 Full speed (or root) hub
>> bMaxPacketSize0 64
>> idVendor 0x1d6b Linux Foundation
>> idProduct 0x0001 1.1 root hub
>> bcdDevice 3.06
>> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd
>> iProduct 2 UHCI Host Controller
>> iSerial 1 0000:00:1d.1
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 25
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0xe0
>> Self Powered
>> Remote Wakeup
>> MaxPower 0mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 1
>> bInterfaceClass 9 Hub
>> bInterfaceSubClass 0 Unused
>> bInterfaceProtocol 0 Full speed (or root) hub
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x81 EP 1 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0002 1x 2 bytes
>> bInterval 255
>> Hub Descriptor:
>> bLength 9
>> bDescriptorType 41
>> nNbrPorts 2
>> wHubCharacteristic 0x000a
>> No power switching (usb 1.0)
>> Per-port overcurrent protection
>> bPwrOn2PwrGood 1 * 2 milli seconds
>> bHubContrCurrent 0 milli Ampere
>> DeviceRemovable 0x00
>> PortPwrCtrlMask 0xff
>> Hub Port Status:
>> Port 1: 0000.0100 power
>> Port 2: 0000.0100 power
>> Device Status: 0x0001
>> Self Powered
>>
>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 1.10
>> bDeviceClass 9 Hub
>> bDeviceSubClass 0 Unused
>> bDeviceProtocol 0 Full speed (or root) hub
>> bMaxPacketSize0 64
>> idVendor 0x1d6b Linux Foundation
>> idProduct 0x0001 1.1 root hub
>> bcdDevice 3.06
>> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd
>> iProduct 2 UHCI Host Controller
>> iSerial 1 0000:00:1d.2
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 25
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0xe0
>> Self Powered
>> Remote Wakeup
>> MaxPower 0mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 1
>> bInterfaceClass 9 Hub
>> bInterfaceSubClass 0 Unused
>> bInterfaceProtocol 0 Full speed (or root) hub
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x81 EP 1 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0002 1x 2 bytes
>> bInterval 255
>> Hub Descriptor:
>> bLength 9
>> bDescriptorType 41
>> nNbrPorts 2
>> wHubCharacteristic 0x000a
>> No power switching (usb 1.0)
>> Per-port overcurrent protection
>> bPwrOn2PwrGood 1 * 2 milli seconds
>> bHubContrCurrent 0 milli Ampere
>> DeviceRemovable 0x00
>> PortPwrCtrlMask 0xff
>> Hub Port Status:
>> Port 1: 0000.0100 power
>> Port 2: 0000.0100 power
>> Device Status: 0x0001
>> Self Powered
>>
>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 1.10
>> bDeviceClass 9 Hub
>> bDeviceSubClass 0 Unused
>> bDeviceProtocol 0 Full speed (or root) hub
>> bMaxPacketSize0 64
>> idVendor 0x1d6b Linux Foundation
>> idProduct 0x0001 1.1 root hub
>> bcdDevice 3.06
>> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd
>> iProduct 2 UHCI Host Controller
>> iSerial 1 0000:00:1d.3
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 25
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0xe0
>> Self Powered
>> Remote Wakeup
>> MaxPower 0mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 1
>> bInterfaceClass 9 Hub
>> bInterfaceSubClass 0 Unused
>> bInterfaceProtocol 0 Full speed (or root) hub
>> iInterface 0
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x81 EP 1 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0002 1x 2 bytes
>> bInterval 255
>> Hub Descriptor:
>> bLength 9
>> bDescriptorType 41
>> nNbrPorts 2
>> wHubCharacteristic 0x000a
>> No power switching (usb 1.0)
>> Per-port overcurrent protection
>> bPwrOn2PwrGood 1 * 2 milli seconds
>> bHubContrCurrent 0 milli Ampere
>> DeviceRemovable 0x00
>> PortPwrCtrlMask 0xff
>> Hub Port Status:
>> Port 1: 0000.0100 power
>> Port 2: 0000.0303 lowspeed power enable connect
>> Device Status: 0x0001
>> Self Powered
>>
>>
>>
>> On Thu, May 30, 2013 at 8:27 AM, Hans de Goede
<hdegoede(a)redhat.com<mailto:
>> hdegoede(a)redhat.com>> wrote:
>>
>> Hi,
>>
>>
>> On 05/30/2013 04:17 PM, Ryan Wilkinson wrote:
>>
>> Hans,
>>
>> Thanks for the info. Remote viewer has keyboard focus when
>> attempting usb pass-through. Just tried again to confirm. These are the
>> two package versions I'm seeing that are installed:
>>
>> virt-viewer.x86_64 0.5.4-3.fc18
>> virt-viewer.i686 0.5.3-1.fc17
>>
>>
>> And you can pass the device through manually from the menu?
>>
>> Can you do lsusb -v with the device plugin and then copy and
>> paste the output for the device in question into your next mail ?
>>
>> Regards,
>>
>> Hans
>>
>>
>>