Re: [Users] ovirt 3.2 networking setup problems

From: "Yuriy Demchenko" <demchenko.ya(a)gmail.com&gt; To: "Antoni Segura Puimedon" <asegurap(a)redhat.com&gt; Cc: "oVirt Mailing List" <users(a)ovirt.org&gt; Sent: Thursday, March 7, 2013 7:54:52 AM Subject: Re: [Users] ovirt 3.2 networking setup problems Thanks! that helped

i've managed to add another bond via 'echo "+bondN" > /sys/class/net/bonding_masters' output from commands you asked: > # vdsClient -s 0 getVdsCaps > HBAInventory = {'iSCSI': [{'InitiatorName': > 'iqn.1994-05.com.redhat:7681c664f86a'}], 'FC': [{'wwpn': > '200190b11cac1b09', 'wwnn': '200090b11cac1b09', 'model': 'LPe1205-M > - > Emulex LPe1205-M 8Gb 2-port PCIe Fibre Channel Adapter'}, {'wwpn': > '200290b11cac1b09', 'wwnn': '200090b11cac1b09', 'model': 'LPe1205-M > - > Emulex LPe1205-M 8Gb 2-port PCIe Fibre Channel Adapter'}]} > ISCSIInitiatorName = iqn.1994-05.com.redhat:7681c664f86a > bondings = {'bond4': {'addr': '', 'cfg': {'DEVICE': 'bond4', > 'NM_CONTROLLED': 'no', 'ONBOOT': 'yes', 'BONDING_OPTS': 'mode=6'}, > 'mtu': '1500', 'netmask': '', 'slaves': ['p3p1', 'p3p3'], 'hwaddr': > '90:b1:1c:ac:1b:05'}, 'bond0': {'addr': '', 'cfg': {'BRIDGE': > 'ovirtmgmt', 'NM_CONTROLLED': 'no', 'STP': 'no', 'BONDING_OPTS': > 'mode=6', 'DEVICE': 'bond0', 'ONBOOT': 'yes'}, 'mtu': '1500', > 'netmask': '', 'slaves': ['em1', 'em2'], 'hwaddr': > '90:b1:1c:ac:1b:01'}} > bridges = {'ovirtmgmt': {'addr': '192.168.10.130', 'cfg': > {'IPADDR': '192.168.10.130', 'ONBOOT': 'yes', 'DELAY': '0', > 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0', 'BOOTPROTO': > 'none', 'STP': 'no', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge', > 'GATEWAY': '192.168.10.1'}, 'mtu': '1500', 'netmask': > '255.255.255.0', > 'stp': 'off', 'ports': ['bond0']}} > clusterLevels = ['3.0', '3.1', '3.2'] > cpuCores = 16 > cpuFlags = > fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4_1,sse4_2,x2apic,popcnt,aes,xsave,avx,lahf_lm,ida,arat,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_Penryn,model_Westmere,model_SandyBridge > cpuModel = Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz > cpuSockets = 2 > cpuSpeed = 2599.849 > cpuThreads = 32 > emulatedMachines = ['rhel6.3.0', 'pc', 'rhel6.2.0', > 'rhel6.1.0', > 'rhel6.0.0', 'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0'] > guestOverhead = 65 > hooks = {} > kvmEnabled = true > lastClient = 192.168.10.147 > lastClientIface = ovirtmgmt > management_ip = > memSize = 32062 > netConfigDirty = False > networks = {'ovirtmgmt': {'iface': 'ovirtmgmt', 'addr': > '192.168.10.130', 'cfg': {'IPADDR': '192.168.10.130', 'ONBOOT': > 'yes', > 'DELAY': '0', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0', > 'BOOTPROTO': 'none', 'STP': 'no', 'DEVICE': 'ovirtmgmt', 'TYPE': > 'Bridge', 'GATEWAY': '192.168.10.1'}, 'mtu': '1500', 'netmask': > '255.255.255.0', 'stp': 'off', 'bridged': True, 'gateway': > '192.168.10.1', 'ports': ['bond0']}} > nics = {'em1': {'permhwaddr': '90:B1:1C:AC:1B:01', 'addr': '', > 'cfg': {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MASTER': 'bond0', > 'DEVICE': 'em1', 'STP': 'no', 'ONBOOT': 'yes'}, 'mtu': '1500', > 'netmask': '', 'hwaddr': '90:b1:1c:ac:1b:01', 'speed': 10000}, > 'em2': > {'permhwaddr': '90:B1:1C:AC:1B:04', 'addr': '', 'cfg': {'SLAVE': > 'yes', 'NM_CONTROLLED': 'no', 'MASTER': 'bond0', 'DEVICE': 'em2', > 'STP': 'no', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '', > 'hwaddr': > '90:b1:1c:ac:1b:04', 'speed': 10000}, 'p3p4': {'addr': '', 'cfg': > {'DEVICE': 'p3p4', 'HWADDR': '90:B1:1C:AC:1B:08', 'ONBOOT': 'no', > 'NM_CONTROLLED': 'yes'}, 'mtu': '1500', 'netmask': '', 'hwaddr': > '90:b1:1c:ac:1b:08', 'speed': 0}, 'p3p3': {'permhwaddr': > '90:B1:1C:AC:1B:07', 'addr': '', 'cfg': {'SLAVE': 'yes', 'ONBOOT': > 'yes', 'NM_CONTROLLED': 'no', 'MASTER': 'bond4', 'HWADDR': > '90:b1:1c:ac:1b:07', 'DEVICE': 'p3p3'}, 'mtu': '1500', 'netmask': > '', > 'hwaddr': '90:b1:1c:ac:1b:07', 'speed': 1000}, 'p3p2': {'addr': '', > 'cfg': {'DEVICE': 'p3p2', 'HWADDR': '90:B1:1C:AC:1B:06', 'ONBOOT': > 'no', 'NM_CONTROLLED': 'yes'}, 'mtu': '1500', 'netmask': '', > 'hwaddr': > '90:b1:1c:ac:1b:06', 'speed': 0}, 'p3p1': {'permhwaddr': > '90:B1:1C:AC:1B:05', 'addr': '', 'cfg': {'SLAVE': 'yes', 'ONBOOT': > 'yes', 'NM_CONTROLLED': 'no', 'MASTER': 'bond4', 'HWADDR': > '90:b1:1c:ac:1b:05', 'DEVICE': 'p3p1'}, 'mtu': '1500', 'netmask': > '', > 'hwaddr': '90:b1:1c:ac:1b:05', 'speed': 1000}} > operatingSystem = {'release': '3.el6.centos.9', 'version': '6', > 'name': 'RHEL'} > packages2 = {'kernel': {'release': '279.22.1.el6.x86_64', > 'buildtime': 1360105846.0, 'version': '2.6.32'}, 'spice-server': > {'release': '10.el6', 'buildtime': 1340375889, 'version': > '0.10.1'}, > 'vdsm': {'release': '0.31.20.el6', 'buildtime': 1361952052, > 'version': > '4.10.3'}, 'qemu-kvm': {'release': '2.295.el6.10', 'buildtime': > 1357897281, 'version': '0.12.1.2'}, 'libvirt': {'release': > '21.el6_3.8', 'buildtime': 1359401311, 'version': '0.9.10'}, > 'qemu-img': {'release': '2.295.el6.10', 'buildtime': 1357897281, > 'version': '0.12.1.2'}, 'mom': {'release': '1.el6', 'buildtime': > 1349470062, 'version': '0.3.0'}} > reservedMem = 321 > software_revision = 0.31 > software_version = 4.10 > supportedENGINEs = ['3.0', '3.1'] > supportedProtocols = ['2.2', '2.3'] > uuid = 4C4C4544-004E-5910-804D-C6C04F47354A > version_name = Snow Man > vlans = {} > vmTypes = ['kvm'] before echo: > # cat /sys/class/net/bonding_masters > bond0 bond4 after: > # cat /sys/class/net/bonding_masters > bond0 bond4 bond1 Yuriy Demchenko On 03/06/2013 04:28 PM, Antoni Segura Puimedon wrote: > Could you ssh to the host and do: > > cat /sys/class/net/bonding_masters > > There is a limitation on ovirt-3.2 that only the default bridges > can be used. If you don't have enough of them, you can always > create the needed bridge doing > > echo "+bondN" > /sys/class/net/bonding_masters > where N is the bridge you want to create. > > It would also be helpful to see the contents of doing > > vdsClient -s 0 getVdsCaps