[ovirt-users] hostdev block entry for a sr-iov setup

I apologize if I'm not in the right section here. Please fee free to move this thread to the appropriate section as needed. I am trying to pass an Intel GPU to a KVM virtual machine by following this link @ https://blog.tmm.cx/2020/05/15/passing-an-intel-gpu-to-a-linux-kvm-virtua.... The "only" difference with the proposed setup is that my setup is using a Tiger Lake i7-11800H with Intel Xe iGPU, which does not support GVT-d/g, but SR-IOV, wihch has been set up correctly as I can create and see the VFs just fine -- iGPU @ 00:02.0 and the first VF @ 00:02.1, etc. I am running PopOS 22.04 LTS, kernel 6.0.6. Here is where I need your help. In this guide, in the section "Add the vGPU mediated PCI device", here's the hostdev entry for a GVT-d setup in the libvirt XML file: ... <hostdev mode='subsystem' type='mdev' managed='no' model='vfio-pci' display='on'> <source> <address uuid='cb33ec6d-ad44-4702-b80f-c176f56afea1'/> </source> <address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/> </hostdev> ... How does this translate to a SR-IOV setup since there's no type=mdev and uuid address? I've read quite a bit on https://ovirt.org/documentation/administration_guide/index.html#Configuri..., which offers a NIC sample section, but nothing related to a vGPU setup. Thanks for all the help.