Hi Mike,
I will also double check my side starting from a new clone. To get all the patches you
've put in for stateless, are these the steps I need to take?
git clone
-----Original Message-----
From: Mike Burns [mailto:mburns@redhat.com]
Sent: Monday, February 13, 2012 5:56 AM
To: Li, David
Cc: users(a)ovirt.org
Subject: RE: [Users] Pxeboot - pwd/login issue
On Sat, 2012-02-11 at 07:39 -0800, Li, David wrote:
> Mike,
>
> Tried the new ssh patch and the problem still there. Both options were
> used BOOTIF and ssh_pwauth
>
> When I logged in first time and changed pwd, any subsequent logins were
rejected. Again I couldn't capture the error message.
>
> Tried to ssh into the node, but was rejected too:
>
> [xxx oVirtNode]# ssh admin(a)192.168.36.114 The authenticity of host
> '192.168.36.114 (192.168.36.114)' can't be established.
> RSA key fingerprint is 23:6f:98:80:80:ec:d7:bb:e5:2a:02:59:93:85:38:39.
> Are you sure you want to continue connecting (yes/no)? yes
> Warning: Permanently added '192.168.36.114' (RSA) to the list of known
hosts.
> Permission denied (publickey,gssapi-keyex,gssapi-with-mic).
Hmm, looks like something isn't right with ssh_pwauth then. I'll look into
that,
but for now, try using rootpw instead of adminpw. Then login as root. Once
you're in as root, you can su - admin to go the the TUI (or in this case, get the
stack trace for why the TUI is failing).
Mike
>
>
> - David
> ________________________________________
> From: Mike Burns [mburns(a)redhat.com]
> Sent: Friday, February 10, 2012 11:34 AM
> To: Li, David
> Cc: users(a)ovirt.org
> Subject: RE: [Users] Pxeboot - pwd/login issue
>
> On Fri, 2012-02-10 at 11:22 -0800, Li, David wrote:
> > ok, I have already patched like this. Hope this is ok:
> >
> > [lid@FC16-1 ovirt-node]$ git fetch
> >
http://gerrit.ovirt.org/p/ovirt-node refs/changes/07/1807/1 && git
> > checkout FETCH_HEAD
> > remote: Counting objects: 57, done
> > remote: Finding sources: 100% (39/39)
> > remote: Total 39 (delta 28), reused 39 (delta 28) Unpacking objects:
> > 100% (39/39), done.
> > From
http://gerrit.ovirt.org/p/ovirt-node
> > * branch refs/changes/07/1807/1 -> FETCH_HEAD
> > Warning: you are leaving 1 commit behind, not connected to any of
> > your branches:
> >
> > 07d8a0f Add archipel option with stateless boot
> >
> > If you want to keep them by creating a new branch, this may be a
> > good time to do so with:
> >
> > git branch new_branch_name
07d8a0fc5007c5f74f9421b7a565cd2db2d9e772
> >
> > HEAD is now at a94c33c... fix ssh_pwauth handling in autoinstall
> > [lid@FC16-1 ovirt-node]$ git fetch
> >
http://gerrit.ovirt.org/p/ovirt-node refs/changes/08/1808/1 && git
> > checkout FETCH_HEAD
> > remote: Counting objects: 62, done
> > remote: Finding sources: 100% (44/44)
> > remote: Total 44 (delta 32), reused 44 (delta 32) Unpacking objects:
> > 100% (44/44), done.
> > From
http://gerrit.ovirt.org/p/ovirt-node
> > * branch refs/changes/08/1808/1 -> FETCH_HEAD
> > Warning: you are leaving 5 commits behind, not connected to any of
> > your branches:
> >
> > a94c33c fix ssh_pwauth handling in autoinstall
> > 893a095 Add archipel option with stateless boot
> > a1053cb regenerate repos.ks when building iso
> > 237870c Add network configure before dropping into emergency shell
> > 5bb3613 add error handling to recent rhn.py commit
> >
> > If you want to keep them by creating a new branch, this may be a
> > good time to do so with:
> >
> > git branch new_branch_name
a94c33c6d0957391a48ab0cd2e78e4a15e5ad80e
> >
> > HEAD is now at 3daa6d3... when stateless, don't execute store_config
> > and remove_config
> > [lid@FC16-1 ovirt-node]$
>
> I *think* you're ok, because I pushed the commits such that this last
> command should get both. The way to check is to run
>
> $ git log
>
> and look at the commits in the log. You should see both the commits
> "fix ssh_pwauth handling..." and "when stateless..." commits at
the
> top of the log.
>
> >
> >
> > ONE MORE QUESTION: do I need to run 'make publish' before make iso?
>
> Yes, always rerun make publish. In general, I'd say rerun the
> autogen.sh too, but in this case you're fine.
>
> Mike
> >
> > - David
> > ________________________________________
> > From: Mike Burns [mburns(a)redhat.com]
> > Sent: Friday, February 10, 2012 11:19 AM
> > To: Li, David
> > Cc: users(a)ovirt.org
> > Subject: Re: [Users] Pxeboot - pwd/login issue
> >
> > On Fri, 2012-02-10 at 11:09 -0800, Li, David wrote:
> > > Ok, what's the right cmd to get both? Do I have to start from
scratch?
> >
> > No need to start from scratch.
> >
> > First, figure out the name of the remote.
> > $ git remote show
> > It will most likely return just one entry, and it's probably named
> > origin. If it's something other than origin, then just substitute
> > in the following commands:
> >
> > $ git fetch origin
> > $ git reset --hard origin/master
> > $ git fetch
http://gerrit.ovirt.org/p/ovirt-node
> > refs/changes/07/1807/1 && git cherry-pick FETCH_HEAD $ git fetch
> >
http://gerrit.ovirt.org/p/ovirt-node refs/changes/08/1808/1 && git
> > cherry-pick FETCH_HEAD
> >
> > $ git status # should show something like:
> > # On branch master
> > # Your branch is ahead of 'origin/master' by 2 commits.
> >
> > Now you should be good to build.
> >
> > Mike
> > >
> > > >-----Original Message-----
> > > >From: Mike Burns [mailto:mburns@redhat.com]
> > > >Sent: Friday, February 10, 2012 11:01 AM
> > > >To: Li, David
> > > >Cc: users(a)ovirt.org
> > > >Subject: Re: [Users] Pxeboot - pwd/login issue
> > > >
> > > >On Fri, 2012-02-10 at 10:49 -0800, Li, David wrote:
> > > >> Mike,
> > > >> I think I got a glimpse of the error message - something like
> > > >> "persistent
> > > >storage not available" after I tried to login with the new
passwd.
> > > >> Does this make sense?
> > > >
> > > >Try this patch with the other one I just sent:
> > > >
> > > >http://gerrit.ovirt.org/1808
> > > >
> > > >Mike
> > > >>
> > > >> David
> > > >>
> > > >>
> > > >> >-----Original Message-----
> > > >> >From: Mike Burns [mailto:mburns@redhat.com]
> > > >> >Sent: Friday, February 10, 2012 7:37 AM
> > > >> >To: Li, David
> > > >> >Cc: users(a)ovirt.org
> > > >> >Subject: RE: [Users] Pxeboot - pwd/login issue
> > > >> >
> > > >> >On Fri, 2012-02-10 at 07:17 -0800, Li, David wrote:
> > > >> >> Hi Mike,
> > > >> >>
> > > >> >> I ran into the login/pwd problem again with this new
build.
> > > >> >> Kernel option adminpw worked but only for a short time.
I
> > > >> >> was asked to change pwd immediately after login but
then
> > > >> >> rejected again after I did
> > > >that.
> > > >> >> There was an short-lived error message on the screen but
I
> > > >> >> wasn't able to capture it.
> > > >> >
> > > >> >You can try booting with "BOOTIF=eth0 ssh_pwauth=1"
in the
> > > >> >command
> > > >line.
> > > >> >This will configure networking and enable SSH password
authentication.
> > > >> >Then you can ssh admin@<your host> and it will show you
the error.
> > > >> >
> > > >> >>
> > > >> >> I tried the latest from archipel source and it worked
> > > >> >> without password issue. I pulled it from:
> > > >> >>
> > > >> >> git clone
https://github.com/primalmotion/Archipel.git
> > > >> >
> > > >> >I'm using
git://github.com/primalmotion/Node.git
> > > >> >
> > > >> >The only differences I see between the 2 are some minor
> > > >> >formatting and conditional changes in recipe/Makefile.am and
a
> > > >> >couple patches that were pushed since the github repo was
> > > >> >updated. These patches are all on the
gerrit.ovirt.org
side.
> > > >> >
> > > >> >Note: there is an incompatible change that was merged into
> > > >> >master this morning. I'm working on a rebase of the
archipel
> > > >> >stuff now to include
> > > >it.
> > > >> >
> > > >> >Mike
> > > >> >
> > > >> >>
> > > >> >> There might be a few updates right after you pulled it
last time.
> > > >> >>
> > > >> >> Would you mind merge the new updates into ovirt node
again?
> > > >> >>
> > > >> >> Thanks.
> > > >> >>
> > > >> >> David
> > > >> >>
> > > >> >>
> > > >> >> >-----Original Message-----
> > > >> >> >From: Mike Burns [mailto:mburns@redhat.com]
> > > >> >> >Sent: Thursday, February 09, 2012 5:10 PM
> > > >> >> >To: Li, David
> > > >> >> >Cc: Perry Myers; users(a)ovirt.org
> > > >> >> >Subject: Re: [Users] Pxeboot
> > > >> >> >
> > > >> >> >On Thu, 2012-02-09 at 17:05 -0800, Li, David wrote:
> > > >> >> >> Mike,
> > > >> >> >> Built it finally!
> > > >> >> >> Thanks a lot!
> > > >> >> >
> > > >> >> >Woot!
> > > >> >> >
> > > >> >> >>
> > > >> >> >> >-----Original Message-----
> > > >> >> >> >From: Mike Burns
[mailto:mburns@redhat.com]
> > > >> >> >> >Sent: Thursday, February 09, 2012 4:18 PM
> > > >> >> >> >To: Li, David
> > > >> >> >> >Cc: Perry Myers; users(a)ovirt.org
> > > >> >> >> >Subject: Re: [Users] Pxeboot
> > > >> >> >> >
> > > >> >> >> >On Thu, 2012-02-09 at 15:50 -0800, Li, David
wrote:
> > > >> >> >> >> MIke,
> > > >> >> >> >>
> > > >> >> >> >> Got something new this time in make
publish:
> > > >> >> >> >>
> > > >> >> >> >> /bin/sh: -c: line 36: syntax error near
unexpected token `)'
> > > >> >> >> >> /bin/sh: -c: line 36: `)'
> > > >> >> >> >> make[1]: *** [repos.ks] Error 1
> > > >> >> >> >> make[1]: Leaving directory
> > > >> >> >> >>
`/home/lid/workspace/ovirt/node-archipel-
> > > >> >> >> >2.2.2/ovirt-node/recipe'
> > > >> >> >> >> make: *** [distdir] Error 1
> > > >> >> >> >>
> > > >> >> >> >> [lid@FC16-1 ovirt-node]$ echo
$OVIRT_CACHE_DIR
> > > >> >> >$OVIRT_LOCAL_REPO
> > > >> >> >> >> /home/lid/ovirt-cache
> > > >> >> >> >> file:///home/lid/ovirt-cache/ovirt
> > > >> >> >> >> [lid@FC16-1 ovirt-node]$
> > > >> >> >> >
> > > >> >> >> >Oops, bad merge on my part.
> > > >> >> >> >
> > > >> >> >> >$ git reset --hard origin/master #sets you
back to head
> > > >> >> >> >of the master branch $ git fetch
> > > >> >> >> >http://gerrit.ovirt.org/p/ovirt-node
> > > >> >> >> >refs/changes/38/1738/3 && git
cherry-pick FETCH_HEAD #
> > > >> >> >> >checks out the
> > > >> >> >new version of the patch set.
> > > >> >> >> >
> > > >> >> >> >Mike
> > > >> >> >> >
> > > >> >> >> >>
> > > >> >> >> >>
> > > >> >> >> >> - David
> > > >> >> >> >>
________________________________________
> > > >> >> >> >> From: Mike Burns [mburns(a)redhat.com]
> > > >> >> >> >> Sent: Thursday, February 09, 2012 2:12
PM
> > > >> >> >> >> To: Li, David
> > > >> >> >> >> Cc: Perry Myers; users(a)ovirt.org
> > > >> >> >> >> Subject: Re: [Users] Pxeboot
> > > >> >> >> >>
> > > >> >> >> >> On Thu, 2012-02-09 at 13:34 -0800, Li,
David wrote:
> > > >> >> >> >> > Mike,
> > > >> >> >> >> >
> > > >> >> >> >> > It seems it needs couple vdsm
pkgs:
> > > >> >> >> >> >
> > > >> >> >> >> > ./node-creator ovirt-node-image.ks
Error creating Live CD :
> > > >> >> >> >> > Failed to find package
'vdsm-cli' : No
> > > >> >> >> >> > package(s) available to install
mv
> > > >> >> >> >> > ovirt-node-image.iso
> > > >> >> >> >> >
ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
> > > >> >> >> >> > mv: cannot stat
`ovirt-node-image.iso': No such file
> > > >> >> >> >> > or directory
> > > >> >> >> >> > make: *** [ovirt-node-image.iso]
Error 1
> > > >> >> >> >> >
> > > >> >> >> >> >
> > > >> >> >> >> > can I remove them from ks files?
> > > >> >> >> >>
> > > >> >> >> >> Not if you want to use ovirt-node with
ovirt-engine.
> > > >> >> >> >> There was a bug in that patch set that
is fixed in
> > > >> >> >> >> patch set 2 (along with the bad =====
package). I
> > > >> >> >> >> hadn't pulled the patch set
together and uploaded to gerrit
yet, but it's there now.
> > > >> >> >> >>
> > > >> >> >> >> git fetch
http://gerrit.ovirt.org/p/ovirt-node
> > > >> >> >> >> refs/changes/38/1738/2 && git
checkout FETCH_HEAD
> > > >> >> >> >>
> > > >> >> >> >> This should fix the problem.
> > > >> >> >> >>
> > > >> >> >> >> Mike
> > > >> >> >> >>
> > > >> >> >> >> >
> > > >> >> >> >> > - David
> > > >> >> >> >> >
________________________________________
> > > >> >> >> >> > From: Mike Burns
[mburns(a)redhat.com]
> > > >> >> >> >> > Sent: Thursday, February 09, 2012
12:07 PM
> > > >> >> >> >> > To: Li, David
> > > >> >> >> >> > Cc: Perry Myers; users(a)ovirt.org
> > > >> >> >> >> > Subject: Re: [Users] Pxeboot
> > > >> >> >> >> >
> > > >> >> >> >> > On Thu, 2012-02-09 at 11:52 -0800,
Li, David wrote:
> > > >> >> >> >> > > It's still the same
error:
> > > >> >> >> >> > >
> > > >> >> >> >> > > [lid@FC16-1 ovirt-node]$ cd
recipe/
> > > >> >> >> >> > > [lid@FC16-1 recipe]$ make
ovirt-node-image.iso ( \
> > > >> >> >> >> > > echo
"PRODUCT='"oVirt Node Hypervisor"'" ;\
> > > >> >> >> >> > > echo
"PRODUCT_SHORT='"oVirt Node Hypervisor"'" ;\
> > > >> >> >> >> > > echo
"PACKAGE=ovirt-node-image" ;\
> > > >> >> >> >> > > echo
"VERSION=2.2.3" ;\
> > > >> >> >> >> > > echo
"RELEASE=0.1fc16.git16688ea" ;\
> > > >> >> >> >> > > ) > version.ks
> > > >> >> >> >> > > ./node-creator
ovirt-node-image.ks Error creating Live
CD :
> > > >> >> >> >> > > Failed to find package
'=======' : No package(s)
> > > >> >> >> >> > > available to install mv
ovirt-node-image.iso
> > > >> >> >> >> > >
ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
> > > >> >> >> >> > > mv: cannot stat
`ovirt-node-image.iso': No such
> > > >> >> >> >> > > file or directory
> > > >> >> >> >> > > make: ***
[ovirt-node-image.iso] Error 1
> > > >> >> >> >> > > [lid@FC16-1 recipe]$ echo
$OVIRT_LOCAL_REPO
> > > >> >> >> >> > >
file:///home/lid/ovirt-cache/ovirt
> > > >> >> >> >> > > [lid@FC16-1 recipe]$ ll
> > > >> >> >> >> > > /home/lid/ovirt-cache/ovirt/
total
> > > >> >> >> >> > > 12 drwxr-xr-x. 2 lid lid 4096
Feb 9 11:10 noarch
> > > >> >> >> >> > > drwxrwxr-x. 2 lid lid 4096
Feb 9 11:10 repodata
drwxrwxr-x.
> > > >> >> >> >> > > 2 lid lid 4096 Feb 9
> > > >> >> >> >> > > 11:10 src
> > > >> >> >> >> >
> > > >> >> >> >> > That's a bug in the patch.
edit
> > > >> >> >> >> > recipe/common-pkgs.ks and remove
the last line which is
"======="
> > > >> >> >> >> >
> > > >> >> >> >> > Mike
> > > >> >> >> >> > >
> > > >> >> >> >> > >
> > > >> >> >> >> > > Did make publish store the
rpms in
$OVIRT_LOCAL_REPO?
> > > >> >> >> >> > >
> > > >> >> >> >> > > - David
> > > >> >> >> >> > >
________________________________________
> > > >> >> >> >> > > From: Mike Burns
[mburns(a)redhat.com]
> > > >> >> >> >> > > Sent: Thursday, February 09,
2012 11:44 AM
> > > >> >> >> >> > > To: Li, David
> > > >> >> >> >> > > Cc: Perry Myers;
users(a)ovirt.org
> > > >> >> >> >> > > Subject: RE: [Users]
Pxeboot
> > > >> >> >> >> > >
> > > >> >> >> >> > > On Thu, 2012-02-09 at 11:40
-0800, Li, David wrote:
> > > >> >> >> >> > > > The error seems a little
stubborn.
> > > >> >> >> >> > > >
> > > >> >> >> >> > > > [lid@FC16-1 recipe]$
echo $OVIRT_LOCAL_REPO
> > > >> >> >> >> > > >
file://home/lid/ovirt-cache/ovirt
> > > >> >> >> >> > >
> > > >> >> >> >> > > You need 3 slashes.
> > > >> >> >> >> > >
file:///home/lid/ovirt-cache/ovirt
> > > >> >> >> >> > >
> > > >> >> >> >> > > > [lid@FC16-1 recipe]$
make ovirt-node-image.iso ( \
> > > >> >> >> >> > > > echo
"PRODUCT='"oVirt Node Hypervisor"'" ;\
> > > >> >> >> >> > > > echo
"PRODUCT_SHORT='"oVirt Node
Hypervisor"'" ;\
> > > >> >> >> >> > > > echo
"PACKAGE=ovirt-node-image" ;\
> > > >> >> >> >> > > > echo
"VERSION=2.2.3" ;\
> > > >> >> >> >> > > > echo
"RELEASE=0.1fc16.git16688ea" ;\
> > > >> >> >> >> > > > ) > version.ks
> > > >> >> >> >> > > > ./node-creator
ovirt-node-image.ks Error creating Live
CD :
> > > >> >> >> >> > > > Unable to download from
repo : Cannot retrieve
> > > >> >> >> >> > > > repository metadata
(repomd.xml) for repository: local.
> > > >> >> >> >> > > > Please verify its path
and try again mv
> > > >> >> >> >> > > > ovirt-node-image.iso
> > > >> >> >> >> > > >
ovirt-node-image-2.2.3-0.1fc16.git16688ea.iso
> > > >> >> >> >> > > > mv: cannot stat
`ovirt-node-image.iso': No such
> > > >> >> >> >> > > > file or directory
> > > >> >> >> >> > > > make: ***
[ovirt-node-image.iso] Error 1
> > > >> >> >> >> > > >
> > > >> >> >> >> > > > There is also a pop-up
window: Unable to open a
> > > >> >> >> >> > > > folder for
_ovirt-node-imag
> > > >> >> >> >> > > >
> > > >> >> >> >> > > > maybe it's looking
at the wrong place?
> > > >> >> >> >> > > >
> > > >> >> >> >> > > >
> > > >> >> >> >> > > > - David
> > > >> >> >> >> > > >
________________________________________
> > > >> >> >> >> > > > From: Mike Burns
[mburns(a)redhat.com]
> > > >> >> >> >> > > > Sent: Thursday, February
09, 2012 11:15 AM
> > > >> >> >> >> > > > To: Li, David
> > > >> >> >> >> > > > Cc: Perry Myers;
users(a)ovirt.org
> > > >> >> >> >> > > > Subject: RE: [Users]
Pxeboot
> > > >> >> >> >> > > >
> > > >> >> >> >> > > > On Thu, 2012-02-09 at
10:57 -0800, Li, David wrote:
> > > >> >> >> >> > > > > ok, that's my
bad:)
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > > > Ran into error at
the last iso build step:
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > > > Start building ISO
image....
> > > >> >> >> >> > > > > ( \
> > > >> >> >> >> > > > > echo
"PRODUCT='"oVirt Node Hypervisor"'" ;\
> > > >> >> >> >> > > > > echo
"PRODUCT_SHORT='"oVirt Node
Hypervisor"'" ;\
> > > >> >> >> >> > > > > echo
"PACKAGE=ovirt-node-image" ;\
> > > >> >> >> >> > > > > echo
"VERSION=2.2.3" ;\
> > > >> >> >> >> > > > > echo
"RELEASE=0.1.fc16.git16688ea" ;\
> > > >> >> >> >> > > > > ) > version.ks
./node-creator
> > > >> >> >> >> > > > > ovirt-node-image.ks
Error creating Live CD :
> > > >> >> >> >> > > > > Unable to download
from repo : Cannot retrieve
> > > >> >> >> >> > > > > repository metadata
(repomd.xml) for repository:
local.
> > > >> >> >> >> > > > > Please verify its
path and try again mv
> > > >> >> >> >> > > > >
ovirt-node-image.iso
> > > >> >> >> >> > > > >
ovirt-node-image-2.2.3-0.1.fc16.git16688ea.iso
> > > >> >> >> >> > > > > mv: cannot stat
`ovirt-node-image.iso': No
> > > >> >> >> >> > > > > such file or
directory
> > > >> >> >> >> > > > > make: ***
[ovirt-node-image.iso] Error 1
> > > >> >> >> >> > > >
> > > >> >> >> >> > > > IIRC, this is usually
because you have
> > > >> >> >> >> > > > OVIRT_LOCAL_REPO
defined, but not correctly. It
needs to be like this:
> > > >> >> >> >> > > >
file:///home/mburns/rpmbuild/RPMS
> > > >> >> >> >> > > >
> > > >> >> >> >> > > > Ok, I just looked at the
Node Building page, and
> > > >> >> >> >> > > > it needs some
> > > >> >> >updates.
> > > >> >> >> >> > > > Try this from the base
directory of the git repo
> > > >> >> >> >> > > >
> > > >> >> >> >> > > > $ export
OVIRT_CACHE_DIR=${HOME}/ovirt-cache
> > > >> >> >> >> > > > $ export
> > > >> >> >> >> > > >
OVIRT_LOCAL_REPO=file://${OVIRT_CACHE_DIR}/ovirt
> > > >> >> >> >> > > > $ ./autogen.sh
--with-image-minimizer $ make
> > > >> >> >> >> > > > publish #this builds the
rpms and puts them in
> > > >> >> >> >> > > > ${OVIRT_CACHE_DIR} $ cd
recipe $ make
> > > >> >> >> >> > > > ovirt-node-image.iso
> > > >> >> >> >> > > >
> > > >> >> >> >> > > > Mike
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > > > I wonder which repo
my machine is lacking?
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > > > - David
> > > >> >> >> >> > > > >
________________________________________
> > > >> >> >> >> > > > > From: Mike Burns
[mburns(a)redhat.com]
> > > >> >> >> >> > > > > Sent: Thursday,
February 09, 2012 10:02 AM
> > > >> >> >> >> > > > > To: Li, David
> > > >> >> >> >> > > > > Cc: Perry Myers;
users(a)ovirt.org
> > > >> >> >> >> > > > > Subject: Re:
[Users] Pxeboot
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > > > On Thu, 2012-02-09
at 09:47 -0800, Li, David wrote:
> > > >> >> >> >> > > > > > Got an
error:
> > > >> >> >> >> > > > > > [lid@FC16-1
ovirt-node]$ git fetch
> > > >> >> >> >> > > > > >
http://gerrit.ovirt.org/
> > > >> >> >> >> > > > > >
refs/changes/38/1738/1&&git cherry-pick
> > > >> >> >> >> > > > > > FETCH_HEAD
> > > >> >> >> >> > > > > > fatal:
http://gerrit.ovirt.org/info/refs not found:
> > > >> >> >> >> > > > > > did you run
git
> > > >> >> >> >update-server-info on the server?
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > > > Bad copy/paste:
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > > > git fetch
http://gerrit.ovirt.org/p/ovirt-node
> > > >> >> >> >> > > > >
refs/changes/38/1738/1 && git cherry-pick
> > > >> >> >> >> > > > > FETCH_HEAD
> > > >> >> >> >> > > > > >
> > > >> >> >> >> > > > > > any ideas?
> > > >> >> >> >> > > > > >
> > > >> >> >> >> > > > > > - David
> > > >> >> >> >> > > > > >
________________________________________
> > > >> >> >> >> > > > > > From: Mike
Burns [mburns(a)redhat.com]
> > > >> >> >> >> > > > > > Sent:
Thursday, February 09, 2012 8:37 AM
> > > >> >> >> >> > > > > > To: Li,
David
> > > >> >> >> >> > > > > > Cc: Perry
Myers; users(a)ovirt.org
> > > >> >> >> >> > > > > > Subject: Re:
[Users] Pxeboot
> > > >> >> >> >> > > > > >
> > > >> >> >> >> > > > > > On Thu,
2012-02-09 at 08:30 -0800, Li, David wrote:
> > > >> >> >> >> > > > > > > Mike,
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > > Two quick
questions before I kick off a build:
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > > 1. Git
errors. Do they matter?
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > >
[lid@FC16-1 node-archipel-2.2.2]$ git
> > > >> >> >> >> > > > > > > clone
> > > >> >> >> >> > > > > > >
http://gerrit.ovirt.org/p/ovirt-node.git
> > > >> >> >> >refs/changes/38/1738/1&&git checkout
FETCH_HEAD Cloning
> > > >> >> >> >into refs/changes/38/1738/1...
> > > >> >> >> >> > > > > > > remote:
Counting objects: 14791, done
> > > >> >> >> >> > > > > > > remote:
Finding sources: 100%
> > > >> >> >> >> > > > > > >
(14791/14791)
> > > >> >> >> >> > > > > > > remote:
Total 14791 (delta 10855), reused
> > > >> >> >> >> > > > > > > 14778
(delta
> > > >> >> >> >> > > > > > > 10855)
Receiving objects: 100%
> > > >> >> >> >> > > > > > >
(14791/14791),
> > > >> >> >> >> > > > > > > 16.92
MiB
> > > >> >> >> >> > > > > > > | 154
> > > >> >> >> >KiB/s, done.
> > > >> >> >> >> > > > > > > Resolving
deltas: 100% (10855/10855), done.
> > > >> >> >> >> > > > > > > fatal:
Not a git repository (or any of the
> > > >> >> >> >> > > > > > > parent
> > > >> >> >> >> > > > > > >
directories): .git
> > > >> >> >> >> > > > > >
> > > >> >> >> >> > > > > > try this
instead:
> > > >> >> >> >> > > > > >
> > > >> >> >> >> > > > > > git clone
> > > >> >> >> >> > > > > >
http://gerrit.ovirt.org/p/ovirt-node.git
> > > >> >> >> >> > > > > > cd ovirt-node
git fetch
> > > >> >> >> >> > > > > >
http://gerrit.ovirt.org/p/ovirt-node
> > > >> >> >> >> > > > > >
refs/changes/38/1738/1 && git cherry-pick
> > > >> >> >> >> > > > > > FETCH_HEAD
> > > >> >> >> >> > > > > >
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > > 2. Build
machine.
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > > I am
using a x86_64 FC16 VM as the build
machine.
> > > >> >> >> >> > > > > > > My target
is
> > > >> >> >> >x86_64 Intel board. Is this ok?
> > > >> >> >> >> > > > > >
> > > >> >> >> >> > > > > > Should be
fine.
> > > >> >> >> >> > > > > >
> > > >> >> >> >> > > > > > Mike
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > > - David
> > > >> >> >> >> > > > > > >
________________________________________
> > > >> >> >> >> > > > > > > From:
Mike Burns [mburns(a)redhat.com]
> > > >> >> >> >> > > > > > > Sent:
Thursday, February 09, 2012 8:16 AM
> > > >> >> >> >> > > > > > > To: Li,
David
> > > >> >> >> >> > > > > > > Cc: Perry
Myers; users(a)ovirt.org
> > > >> >> >> >> > > > > > > Subject:
RE: [Users] Pxeboot
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > > On Thu,
2012-02-09 at 08:10 -0800, Li, David wrote:
> > > >> >> >> >> > > > > > > > Not
sure where the boot log is since I can't login.
> > > >> >> >> >> > > > > > > >
> > > >> >> >> >> > > > > > > > I
got the source from
> > > >> >> >> >> > > > > > > >
https://github.com/primalmotion/archipel
> > > >> >> >> >> > > > > > > >
-node and followed the build
> > > >> >> >> >> > > > > > > >
instructions in
> > > >> >> >> >> > > > > > > >
http://ovirt.org/wiki/Node_Building
> > > >> >> >> >> > > > > > > >
> > > >> >> >> >> > > > > > > >
maybe I should rebuild the iso from the
> > > >> >> >> >> > > > > > > >
ovirt node source tree
> > > >> >> >> >as you have pulled in archipel changes
yesterday. How do I do
that?
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > > git
fetch
> > > >> >> >> >> > > > > > >
http://gerrit.ovirt.org/p/ovirt-node
> > > >> >> >> >> > > > > > >
refs/changes/38/1738/1 && git checkout
> > > >> >> >> >> > > > > > >
FETCH_HEAD
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > > That
command will checkout the current
> > > >> >> >> >> > > > > > > version
of the archipel-node changes.
> > > >> >> >> >> > > > > > > Then you
can just follow the Node_Building
> > > >> >> >> >> > > > > > > process.
Note that the changes aren't
> > > >> >> >> >> > > > > > > merged
into master yet. I'm still in the
> > > >> >> >> >> > > > > > > process
of reviewing
> > > >> >> >them.
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > > Mike
> > > >> >> >> >> > > > > > > >
> > > >> >> >> >> > > > > > > > -
David
> > > >> >> >> >> > > > > > > >
> > > >> >> >> >> > > > > > > >
> > > >> >> >> >> > > > > > > >
>-----Original Message-----
> > > >> >> >> >> > > > > > > >
>From: Mike Burns
> > > >> >> >> >> > > > > > > >
>[mailto:mburns@redhat.com]
> > > >> >> >> >> > > > > > > >
>Sent: Thursday, February 09, 2012 7:22
> > > >> >> >> >> > > > > > > >
>AM
> > > >> >> >> >> > > > > > > >
>To: Li, David
> > > >> >> >> >> > > > > > > >
>Cc: Perry Myers; users(a)ovirt.org
> > > >> >> >> >> > > > > > > >
>Subject: Re: [Users] Pxeboot
> > > >> >> >> >> > > > > > > >
>
> > > >> >> >> >> > > > > > > >
>On Thu, 2012-02-09 at 07:06 -0800, Li, David
wrote:
> > > >> >> >> >> > > > > > > >
>> Mike,
> > > >> >> >> >> > > > > > > >
>>
> > > >> >> >> >> > > > > > > >
>> I added adminpw as a kernel option.
> > > >> >> >> >> > > > > > > >
>> After boot, I tried
> > > >> >> >> >"admin/abc123"
> > > >> >> >> >> > > > > > > >
>> and "root/abc123" but not able to login.
> > > >> >> >> >> > > > > > > >
>> Any idea?
> > > >> >> >> >> > > > > > > >
>>
> > > >> >> >> >> > > > > > > >
>
> > > >> >> >> >> > > > > > > >
>Are there any errors in your build or boot logs?
> > > >> >> >> >> > > > > > > >
>
> > > >> >> >> >> > > > > > > >
>Mike
> > > >> >> >> >> > > > > > > >
>
> > > >> >> >> >> > > > > > > >
>> David
> > > >> >> >> >> > > > > > > >
>>
> > > >> >> >> >> > > > > > > >
>>
> > > >> >> >> >> > > > > > > >
>> >-----Original Message-----
> > > >> >> >> >> > > > > > > >
>> >From: Mike Burns
> > > >> >> >> >> > > > > > > >
>> >[mailto:mburns@redhat.com]
> > > >> >> >> >> > > > > > > >
>> >Sent: Wednesday, February 08, 2012
> > > >> >> >> >> > > > > > > >
>> >6:53 PM
> > > >> >> >> >> > > > > > > >
>> >To: Li, David
> > > >> >> >> >> > > > > > > >
>> >Cc: Perry Myers; users(a)ovirt.org
> > > >> >> >> >> > > > > > > >
>> >Subject: Re: [Users] Pxeboot
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>> >On Wed, 2012-02-08 at 17:11 -0800,
> > > >> >> >> >> > > > > > > >
>> >Li, David
> > > >wrote:
> > > >> >> >> >> > > > > > > >
>> >> Ok, I built an iso out of archipel
> > > >> >> >> >> > > > > > > >
>> >> and pxebooted it with stateless
> > > >> >> >> >> > > > > > > >
>> >> option. Now
> > > >> >> >> >> > > > > > > >
>> >I got a "localhost" login prompt.
> > > >> >> >> >> > > > > > > >
>> >Any idea what should I put
> > > >> >> >> >in as user/pwd?
> > > >> >> >> >> > > > > > > >
>> >> David
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>> >You will need to pass a password in
> > > >> >> >> >> > > > > > > >
>> >on the command line as well
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>> >adminpw=<hashed_password>
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>> >You can generate the hashed password
using:
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>> >$ openssl passwd
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>> >Assuming the password was abc123
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>> >$ openssl passwd abc123
> > > >> >> >> >> > > > > > > >
>> >tKrQfufCbosr6
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>> >adminpw=tKrQfufCbosr6
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>> >Mike
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>> >>
> > > >> >> >> >> > > > > > > >
>> >> >-----Original Message-----
> > > >> >> >> >> > > > > > > >
>> >> >From: Mike Burns
> > > >> >> >> >> > > > > > > >
>> >> >[mailto:mburns@redhat.com]
> > > >> >> >> >> > > > > > > >
>> >> >Sent: Wednesday, February 08,
> > > >> >> >> >> > > > > > > >
>> >> >2012 4:31 PM
> > > >> >> >> >> > > > > > > >
>> >> >To: Li, David
> > > >> >> >> >> > > > > > > >
>> >> >Cc: Perry Myers; users(a)ovirt.org
> > > >> >> >> >> > > > > > > >
>> >> >Subject: RE: [Users] Pxeboot
> > > >> >> >> >> > > > > > > >
>> >> >
> > > >> >> >> >> > > > > > > >
>> >> >On Wed, 2012-02-08 at 15:43
> > > >> >> >> >> > > > > > > >
>> >> >-0800, Li, David
> > > >> >wrote:
> > > >> >> >> >> > > > > > > >
>> >> >> Ok, I think we are on the same
> > > >> >> >> >> > > > > > > >
>> >> >> page now regarding
> > > >> >> >> >stateless node.
> > > >> >> >> >> > > > > > > >
>> >> >> It looks like the achipel diff
> > > >> >> >> >> > > > > > > >
>> >> >> you just pulled in might be
> > > >> >> >> >> > > > > > > >
>> >> >> able to do this. But I can't
> > > >> >> >> >> > > > > > > >
>> >> >> quite make it out what the
> > > >> >> >> >> > > > > > > >
>> >> >> kernel option should
> > > >> >> >> >> > > > > > > >
>be.
> > > >> >> >> >> > > > > > > >
>> >> >> Is it "stateless=1"?
> > > >> >> >> >> > > > > > > >
>> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >
> > > >> >> >> >> > > > > > > >
>> >> >stateless=1 or just stateless, both will
work.
> > > >> >> >> >> > > > > > > >
>> >> >
> > > >> >> >> >> > > > > > > >
>> >> >
> > > >> >> >> >> > > > > > > >
>> >> >> David
> > > >> >> >> >> > > > > > > >
>> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >-----Original Message-----
> > > >> >> >> >> > > > > > > >
>> >> >> >From: Mike Burns
> > > >> >> >> >> > > > > > > >
>> >> >> >[mailto:mburns@redhat.com]
> > > >> >> >> >> > > > > > > >
>> >> >> >Sent: Wednesday, February 08,
> > > >> >> >> >> > > > > > > >
>> >> >> >2012
> > > >> >> >> >> > > > > > > >
>> >> >> >3:27 PM
> > > >> >> >> >> > > > > > > >
>> >> >> >To: Li, David
> > > >> >> >> >> > > > > > > >
>> >> >> >Cc: Perry Myers;
> > > >> >> >> >> > > > > > > >
>> >> >> >users(a)ovirt.org
> > > >> >> >> >> > > > > > > >
>> >> >> >Subject: Re: [Users] Pxeboot
> > > >> >> >> >> > > > > > > >
>> >> >> >
> > > >> >> >> >> > > > > > > >
>> >> >> >On Wed, 2012-02-08 at 15:19
> > > >> >> >> >> > > > > > > >
>> >> >> >-0800, Li, David
> > > >> >> >wrote:
> > > >> >> >> >> > > > > > > >
>> >> >> >> Perry,
> > > >> >> >> >> > > > > > > >
>> >> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >> I am glad you brought this up.
> > > >> >> >> >> > > > > > > >
>> >> >> >> I 'd be perfectly happy to
> > > >> >> >> >> > > > > > > >
>> >> >> >> run the root fs entirely in
> > > >> >> >> >RAM.
> > > >> >> >> >> > > > > > > >
>> >> >> >> In fact that would
> > > >> >> >> >> > > > > > > >
>> >> >> >be ideal for me. It's just I
> > > >> >> >> >> > > > > > > >
>> >> >> >am not quite sure how to use
> > > >> >> >> >> > > > > > > >
>> >> >> >pxeboot to achieve
> > > >this.
> > > >> >> >> >> > > > > > > >
>> >> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >> I am doing a test now using
> > > >> >> >> >> > > > > > > >
>> >> >> >> the tftpboot files
> > > >> >> >> >created from the iso.
> > > >> >> >> >> > > > > > > >
>> >> >> >> As far as I see, the kernel
> > > >> >> >> >> > > > > > > >
>> >> >> >> boot options
> > > >> >> >> >(pxelinux.cfg/default) has:
> > > >> >> >> >> > > > > > > >
>> >> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >> root=live:/ovirt-node-image-2.2.2-
1.1.
> > > >> >> >> >> > > > > > > >
>> >> >> >> fc1 6.i so
> > > >> >> >> >> > > > > > > >
>> >> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >> With this I can only pxeboot
> > > >> >> >> >> > > > > > > >
>> >> >> >> to the intall screen. What
> > > >> >> >> >> > > > > > > >
>> >> >> >> should I use to let the
> > > >> >> >> >> > > > > > > >
>> >> >> >kernel mount the root fs in memory?
> > > >> >> >> >> > > > > > > >
>> >> >> >Something like
> > > >> >> >> >> > > > > > > >
>root=/dev/ram0?
> > > >> >> >> >> > > > > > > >
>> >> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >> David
> > > >> >> >> >> > > > > > > >
>> >> >> >
> > > >> >> >> >> > > > > > > >
>> >> >> >It's not currently possible with ovirt-
node.
> > > >> >> >> >> > > > > > > >
>> >> >> >That's the whole stateless
> > > >> >> >> >> > > > > > > >
>> >> >> >feature that we outlined.
> > > >> >> >> >> > > > > > > >
>> >> >> >Once we actually have it
> > > >> >> >> >> > > > > > > >
>> >> >> >implemented, it will be
> > > >> >> >> >> > > > > > > >
>> >> >> >something along the lines of
> > > >> >> >> >> > > > > > > >
>> >> >> >adding "stateless" to
> > > >> >> >> >> > > > > > > >
>> >> >the kernel commandline.
> > > >> >> >> >> > > > > > > >
>> >> >> >
> > > >> >> >> >> > > > > > > >
>> >> >> >Mike
> > > >> >> >> >> > > > > > > >
>> >> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >> >-----Original Message-----
> > > >> >> >> >> > > > > > > >
>> >> >> >> >From: Perry Myers
> > > >> >> >> >> > > > > > > >
>> >> >> >> >[mailto:pmyers@redhat.com]
> > > >> >> >> >> > > > > > > >
>> >> >> >> >Sent: Wednesday, February
> > > >> >> >> >> > > > > > > >
>> >> >> >> >08, 2012
> > > >> >> >> >> > > > > > > >
>> >> >> >> >2:54 PM
> > > >> >> >> >> > > > > > > >
>> >> >> >> >To: Mike Burns
> > > >> >> >> >> > > > > > > >
>> >> >> >> >Cc: Li, David;
> > > >> >> >> >> > > > > > > >
>> >> >> >> >users(a)ovirt.org
> > > >> >> >> >> > > > > > > >
>> >> >> >> >Subject: Re: [Users]
> > > >> >> >> >> > > > > > > >
>> >> >> >> >Pxeboot
> > > >> >> >> >> > > > > > > >
>> >> >> >> >
> > > >> >> >> >> > > > > > > >
>> >> >> >> >On 02/08/2012 05:03 PM,
> > > >> >> >> >> > > > > > > >
>> >> >> >> >Mike Burns
> > > >wrote:
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> On Wed, 2012-02-08 at
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> 13:46 -0800, Li, David
> > > >> >> >> >wrote:
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> Mike,
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>>
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> If I understand this
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> correctly, today I
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> should be able to
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> pxeboot and nfs mount
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> the
> > > >> >> >> >root fs from a remote server.
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> Apart from setting up
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> the pxe stuff, I 'd have
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> to populate the ovirt
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> node root fs on the
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> server
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> - perhaps steal it from a disk
install.
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> In other words I am
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> concerned about the
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> point from which the
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> kernel starts to execute
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> /init script (in the
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>> initramfs) to the
> > > >> >> >> >point /init is able to mount the final root
fs from a remote
server.
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> No, there is no way to
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> set this up currently in
> > > >> >> >> >ovirt-node.
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> You could install using a
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> remote iscsi lun if you
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> have a hardware iscsi
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> HBA, but there isn't a
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> way to mount a remote nfs
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> share as the
> > > >> >> >> >> > > > > > > >
>> >> >root fs.
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> Supporting a remote NFS
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> share as the root fs
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> isn't even something that
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> requested as an RFE at
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> this point or on the
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> roadmap as far as
> > > >> >> >> >I'm aware.
> > > >> >> >> >> > > > > > > >
>> >> >> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> It sounds like what
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> you're really looking for
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> is a shared root fs that multiple
hosts could use.
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> This is something that we
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> will probably look into
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> eventually, but it's not
> > > >> >> >> >> > > > > > > >
>> >> >> >> >> on the immediate
> > > >> >> >> >> > > > > > > >
>> >> >roadmap.
> > > >> >> >> >> > > > > > > >
>> >> >> >> >
> > > >> >> >> >> > > > > > > >
>> >> >> >> >Given that the rootfs of
> > > >> >> >> >> > > > > > > >
>> >> >> >> >oVirt Node is fairly small
> > > >> >> >> >> > > > > > > >
>> >> >> >> >and in a truly stateless
> > > >> >> >> >> > > > > > > >
>> >> >> >> >environment would just run
> > > >> >> >> >> > > > > > > >
>> >> >> >> >out of system RAM, there's
> > > >> >> >> >> > > > > > > >
>> >> >> >> >no real reason to try to do
> > > >> >> >> >> > > > > > > >
>> >> >> >> >a shared NFS based
> > > >> >> >> >> > > > > > > >
>rootfs.
> > > >> >> >> >> > > > > > > >
>> >> >> >> >It's an unnecessary
> > > >> >> >> >> > > > > > > >
>> >> >> >> >complication I think, if
> > > >> >> >> >> > > > > > > >
>> >> >> >> >the end goal is to move to
> > > >> >> >> >> > > > > > > >
>> >> >> >> >truly
> > > >> >> >> >> > > > > > > >
>> >> >> >stateless.
> > > >> >> >> >> > > > > > > >
>> >> >> >> >
> > > >> >> >> >> > > > > > > >
>> >> >> >> >For larger systems where
> > > >> >> >> >> > > > > > > >
>> >> >> >> >the rootfs is on the order
> > > >> >> >> >> > > > > > > >
>> >> >> >> >of GB's, shared root may
> > > >> >> >> >> > > > > > > >
>> >> >> >> >make more
> > > >> >> >> >sense.
> > > >> >> >> >> > > > > > > >
>> >> >> >>
> > > >> >> >>
>____________________________________________
> > > >> >> >> >> > > > > > > >
>> >> >> >> ___ Users mailing list
> > > >> >> >> >> > > > > > > >
>> >> >> >> Users(a)ovirt.org
> > > >> >> >> >> > > > > > > >
>> >> >> >>
http://lists.ovirt.org/mailm
> > > >> >> >> >> > > > > > > >
>> >> >> >> an/list inf o/u ser s
> > > >> >> >> >> > > > > > > >
>> >> >> >
> > > >> >> >> >> > > > > > > >
>> >> >>
> > > >> >> >> >> > > > > > > >
>> >> >
> > > >> >> >> >> > > > > > > >
>> >>
> > > >> >> >> >> > > > > > > >
>> >>
> > > >> >> >>
>_______________________________________________
> > > >> >> >> >> > > > > > > >
>> >> Users mailing list Users(a)ovirt.org
> > > >> >> >> >> > > > > > > >
>> >>
http://lists.ovirt.org/mailman/lis
> > > >> >> >> >> > > > > > > >
>> >> tinfo/user
> > > >> >> >> >> > > > > > > >
>> >> s
> > > >> >> >> >> > > > > > > >
>> >
> > > >> >> >> >> > > > > > > >
>>
> > > >> >> >> >> > > > > > > >
>>
> > > >> >> >>
>_______________________________________________
> > > >> >> >> >> > > > > > > >
>> Users mailing list Users(a)ovirt.org
> > > >> >> >> >> > > > > > > >
>>
http://lists.ovirt.org/mailman/listin
> > > >> >> >> >> > > > > > > >
>> fo/users
> > > >> >> >> >> > > > > > > >
>
> > > >> >> >> >> > > > > > > >
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > >
> > > >> >> >> >> > > > > > >
> > > >> >_______________________________________________
> > > >> >> >> >> > > > > > > Users
mailing list Users(a)ovirt.org
> > > >> >> >> >> > > > > > >
http://lists.ovirt.org/mailman/listinfo/us
> > > >> >> >> >> > > > > > > ers
> > > >> >> >> >> > > > > >
> > > >> >> >> >> > > > > >
> > > >> >> >> >> > > > > >
> > > >> >_______________________________________________
> > > >> >> >> >> > > > > > Users mailing
list Users(a)ovirt.org
> > > >> >> >> >> > > > > >
http://lists.ovirt.org/mailman/listinfo/user
> > > >> >> >> >> > > > > > s
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > > >
> > > >> >> >> >> > > >
> > > >> >> >> >> > > >
> > > >> >> >> >> > >
> > > >> >> >> >> > >
> > > >> >> >> >> > >
_______________________________________________
> > > >> >> >> >> > > Users mailing list
Users(a)ovirt.org
> > > >> >> >> >> > >
http://lists.ovirt.org/mailman/listinfo/users
> > > >> >> >> >> >
> > > >> >> >> >> >
> > > >> >> >> >> >
_______________________________________________
> > > >> >> >> >> > Users mailing list
> > > >> >> >> >> > Users(a)ovirt.org
> > > >> >> >> >> >
http://lists.ovirt.org/mailman/listinfo/users
> > > >> >> >> >>
> > > >> >> >> >>
> > > >> >> >> >>
_______________________________________________
> > > >> >> >> >> Users mailing list
> > > >> >> >> >> Users(a)ovirt.org
> > > >> >> >> >>
http://lists.ovirt.org/mailman/listinfo/users
> > > >> >> >> >
> > > >> >> >>
> > > >> >> >>
_______________________________________________
> > > >> >> >> Users mailing list
> > > >> >> >> Users(a)ovirt.org
> > > >> >> >>
http://lists.ovirt.org/mailman/listinfo/users
> > > >> >> >
> > > >> >>
> > > >> >
> > > >>
> > > >> _______________________________________________
> > > >> Users mailing list
> > > >> Users(a)ovirt.org
> > > >>
http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > >
> > > _______________________________________________
> > > Users mailing list
> > > Users(a)ovirt.org
> > >
http://lists.ovirt.org/mailman/listinfo/users
> >
> >
>
>