hello: I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a while now, and am now revisiting some aspects of it for ensuring that I have good reliability. My cluster is a 3 node cluster, with gluster nodes running on each node. After running my cluster a bit, I'm realizing I didn't do a very optimal job of allocating the space on my disk to the different gluster mount points. Fortunately, they were created with LVM, so I'm hoping that I can resize them without much trouble. I have a domain for iso, domain for export, and domain for storage, all thin provisioned; then a domain for the engine, not thin provisioned. I'd like to expand the storage domain, and possibly shrink the engine domain and make that space also available to the main storage domain. Is it as simple as expanding the LVM partition, or are there more steps involved? Do I need to take the node offline? second, I've noticed that the first two nodes seem to have a full copy of the data (the disks are in use), but the 3rd node appears to not be using any of its storage space...It is participating in the gluster cluster, though. Third, currently gluster shares the same network as the VM networks. I'd like to put it on its own network. I'm not sure how to do this, as when I tried to do it at install time, I never got the cluster to come online; I had to make them share the same network to make that work. Ovirt questions: I've noticed that recently, I don't appear to be getting software updates anymore. I used to get update available notifications on my nodes every few days; I haven't seen one for a couple weeks now. is something wrong? I have a windows 10 x64 VM. I get a warning that my VM type does not match the installed OS. All works fine, but I've quadrouple-checked that it does match. Is this a known bug? I have a UPS that all three nodes and the networking are on. It is a USB UPS. How should I best integrate monitoring in? I could put a raspberry pi up and then run NUT or similar on it, but is there a "better" way with oVirt? Thanks! --Jim
Hi Jim, please see inline On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim@palousetech.com> wrote:
hello:
I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a while now, and am now revisiting some aspects of it for ensuring that I have good reliability.
My cluster is a 3 node cluster, with gluster nodes running on each node. After running my cluster a bit, I'm realizing I didn't do a very optimal job of allocating the space on my disk to the different gluster mount points. Fortunately, they were created with LVM, so I'm hoping that I can resize them without much trouble.
I have a domain for iso, domain for export, and domain for storage, all thin provisioned; then a domain for the engine, not thin provisioned. I'd like to expand the storage domain, and possibly shrink the engine domain and make that space also available to the main storage domain. Is it as simple as expanding the LVM partition, or are there more steps involved? Do I need to take the node offline?
I didn't understand completely that part - what is the difference between the domain for storage and the domain for engine you mentioned?
second, I've noticed that the first two nodes seem to have a full copy of the data (the disks are in use), but the 3rd node appears to not be using any of its storage space...It is participating in the gluster cluster, though.
Third, currently gluster shares the same network as the VM networks. I'd like to put it on its own network. I'm not sure how to do this, as when I tried to do it at install time, I never got the cluster to come online; I had to make them share the same network to make that work.
I'm adding Sahina who may shed some light on the gluster question, I'd try on the gluster mailing list as well.
Ovirt questions: I've noticed that recently, I don't appear to be getting software updates anymore. I used to get update available notifications on my nodes every few days; I haven't seen one for a couple weeks now. is something wrong?
I have a windows 10 x64 VM. I get a warning that my VM type does not match the installed OS. All works fine, but I've quadrouple-checked that it does match. Is this a known bug?
Arik, any info on that?
I have a UPS that all three nodes and the networking are on. It is a USB UPS. How should I best integrate monitoring in? I could put a raspberry pi up and then run NUT or similar on it, but is there a "better" way with oVirt?
Thanks! --Jim
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot@redhat.com> wrote:
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim@palousetech.com> wrote:
hello:
I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a while now, and am now revisiting some aspects of it for ensuring that I have good reliability.
My cluster is a 3 node cluster, with gluster nodes running on each node. After running my cluster a bit, I'm realizing I didn't do a very optimal job of allocating the space on my disk to the different gluster mount points. Fortunately, they were created with LVM, so I'm hoping that I can resize them without much trouble.
I have a domain for iso, domain for export, and domain for storage, all thin provisioned; then a domain for the engine, not thin provisioned. I'd like to expand the storage domain, and possibly shrink the engine domain and make that space also available to the main storage domain. Is it as simple as expanding the LVM partition, or are there more steps involved? Do I need to take the node offline?
I didn't understand completely that part - what is the difference between the domain for storage and the domain for engine you mentioned?
I think the domain for engine is the one storing Hosted Engine data. You should be able to expand your underlying LVM partition without having to take the node offline
second, I've noticed that the first two nodes seem to have a full copy of the data (the disks are in use), but the 3rd node appears to not be using any of its storage space...It is participating in the gluster cluster, though.
Is the volume created as replica 3? If so, fully copy of the data should be present on all 3 nodes. Please provide the output of "gluster volume info"
Third, currently gluster shares the same network as the VM networks. I'd like to put it on its own network. I'm not sure how to do this, as when I tried to do it at install time, I never got the cluster to come online; I had to make them share the same network to make that work.
While creating the bricks the network intended for gluster should have been used to identify the brick in hostname:brick-directory. Changing this at a later point is a bit more involved. Please check online or on gluster-users on changing IP address associated with brick.
I'm adding Sahina who may shed some light on the gluster question, I'd try on the gluster mailing list as well.
Ovirt questions: I've noticed that recently, I don't appear to be getting software updates anymore. I used to get update available notifications on my nodes every few days; I haven't seen one for a couple weeks now. is something wrong?
I have a windows 10 x64 VM. I get a warning that my VM type does not match the installed OS. All works fine, but I've quadrouple-checked that it does match. Is this a known bug?
Arik, any info on that?
I have a UPS that all three nodes and the networking are on. It is a USB UPS. How should I best integrate monitoring in? I could put a raspberry pi up and then run NUT or similar on it, but is there a "better" way with oVirt?
Thanks! --Jim
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Thank you! Here's the output of gluster volume info: [root@ovirt1 ~]# gluster volume info Volume Name: data Type: Replicate Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick2/data Brick2: ovirt2.nwfiber.com:/gluster/brick2/data Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter) Options Reconfigured: performance.strict-o-direct: on nfs.disable: on user.cifs: off network.ping-timeout: 30 cluster.shd-max-threads: 6 cluster.shd-wait-qlength: 10000 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full performance.low-prio-threads: 32 features.shard-block-size: 512MB features.shard: on storage.owner-gid: 36 storage.owner-uid: 36 cluster.server-quorum-type: server cluster.quorum-type: auto network.remote-dio: enable cluster.eager-lock: enable performance.stat-prefetch: off performance.io-cache: off performance.read-ahead: off performance.quick-read: off performance.readdir-ahead: on server.allow-insecure: on Volume Name: engine Type: Replicate Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on Volume Name: export Type: Replicate Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4 Status: Stopped Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick3/export Brick2: ovirt2.nwfiber.com:/gluster/brick3/export Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on Volume Name: iso Type: Replicate Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on The node marked as (arbiter) on all of the bricks is the node that is not using any of its disk space. The engine domain is the volume dedicated for storing the hosted engine. Here's some LVM info: --- Logical volume --- LV Path /dev/gluster/engine LV Name engine VG Name gluster LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800 LV Status available # open 1 LV Size 25.00 GiB Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name lvthinpool VG Name gluster LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800 LV Pool metadata lvthinpool_tmeta LV Pool data lvthinpool_tdata LV Status available # open 4 LV Size 150.00 GiB Allocated pool data 65.02% Allocated metadata 14.92% Current LE 38400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:5 --- Logical volume --- LV Path /dev/gluster/data LV Name data VG Name gluster LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 100.00 GiB Mapped size 90.28% Current LE 25600 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:7 --- Logical volume --- LV Path /dev/gluster/export LV Name export VG Name gluster LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8 LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 0.12% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:8 --- Logical volume --- LV Path /dev/gluster/iso LV Name iso VG Name gluster LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 28.86% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:9 --- Logical volume --- LV Path /dev/centos_ovirt/swap LV Name swap VG Name centos_ovirt LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 2 LV Size 16.00 GiB Current LE 4096 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Path /dev/centos_ovirt/root LV Name root VG Name centos_ovirt LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 1 LV Size 20.00 GiB Current LE 5120 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 ------------ I don't use the export gluster volume, and I've never used lvthinpool-type allocations before, so I'm not sure if there's anything special there. I followed the setup instructions from an ovirt contributed documentation that I can't find now that talked about how to install ovirt with gluster on a 3-node cluster. Thank you for your assistance! --Jim On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose@redhat.com> wrote:
On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot@redhat.com> wrote:
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim@palousetech.com> wrote:
hello:
I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a while now, and am now revisiting some aspects of it for ensuring that I have good reliability.
My cluster is a 3 node cluster, with gluster nodes running on each node. After running my cluster a bit, I'm realizing I didn't do a very optimal job of allocating the space on my disk to the different gluster mount points. Fortunately, they were created with LVM, so I'm hoping that I can resize them without much trouble.
I have a domain for iso, domain for export, and domain for storage, all thin provisioned; then a domain for the engine, not thin provisioned. I'd like to expand the storage domain, and possibly shrink the engine domain and make that space also available to the main storage domain. Is it as simple as expanding the LVM partition, or are there more steps involved? Do I need to take the node offline?
I didn't understand completely that part - what is the difference between the domain for storage and the domain for engine you mentioned?
I think the domain for engine is the one storing Hosted Engine data. You should be able to expand your underlying LVM partition without having to take the node offline
second, I've noticed that the first two nodes seem to have a full copy of the data (the disks are in use), but the 3rd node appears to not be using any of its storage space...It is participating in the gluster cluster, though.
Is the volume created as replica 3? If so, fully copy of the data should be present on all 3 nodes. Please provide the output of "gluster volume info"
Third, currently gluster shares the same network as the VM networks. I'd like to put it on its own network. I'm not sure how to do this, as when I tried to do it at install time, I never got the cluster to come online; I had to make them share the same network to make that work.
While creating the bricks the network intended for gluster should have been used to identify the brick in hostname:brick-directory. Changing this at a later point is a bit more involved. Please check online or on gluster-users on changing IP address associated with brick.
I'm adding Sahina who may shed some light on the gluster question, I'd try on the gluster mailing list as well.
Ovirt questions: I've noticed that recently, I don't appear to be getting software updates anymore. I used to get update available notifications on my nodes every few days; I haven't seen one for a couple weeks now. is something wrong?
I have a windows 10 x64 VM. I get a warning that my VM type does not match the installed OS. All works fine, but I've quadrouple-checked that it does match. Is this a known bug?
Arik, any info on that?
I have a UPS that all three nodes and the networking are on. It is a USB UPS. How should I best integrate monitoring in? I could put a raspberry pi up and then run NUT or similar on it, but is there a "better" way with oVirt?
Thanks! --Jim
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Based on the suggestions here, I did successfully remove the unused export gluster brick and allocate all otherwise unassigned space to my data export, then used xfs_growfs to realize the new size. This should hold me for a while longer before building a "proper" storage solution. --Jim On Sat, Apr 1, 2017 at 10:02 AM, Jim Kusznir <jim@palousetech.com> wrote:
Thank you!
Here's the output of gluster volume info: [root@ovirt1 ~]# gluster volume info
Volume Name: data Type: Replicate Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick2/data Brick2: ovirt2.nwfiber.com:/gluster/brick2/data Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter) Options Reconfigured: performance.strict-o-direct: on nfs.disable: on user.cifs: off network.ping-timeout: 30 cluster.shd-max-threads: 6 cluster.shd-wait-qlength: 10000 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full performance.low-prio-threads: 32 features.shard-block-size: 512MB features.shard: on storage.owner-gid: 36 storage.owner-uid: 36 cluster.server-quorum-type: server cluster.quorum-type: auto network.remote-dio: enable cluster.eager-lock: enable performance.stat-prefetch: off performance.io-cache: off performance.read-ahead: off performance.quick-read: off performance.readdir-ahead: on server.allow-insecure: on
Volume Name: engine Type: Replicate Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: export Type: Replicate Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4 Status: Stopped Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick3/export Brick2: ovirt2.nwfiber.com:/gluster/brick3/export Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: iso Type: Replicate Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
The node marked as (arbiter) on all of the bricks is the node that is not using any of its disk space.
The engine domain is the volume dedicated for storing the hosted engine. Here's some LVM info:
--- Logical volume --- LV Path /dev/gluster/engine LV Name engine VG Name gluster LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800 LV Status available # open 1 LV Size 25.00 GiB Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2
--- Logical volume --- LV Name lvthinpool VG Name gluster LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800 LV Pool metadata lvthinpool_tmeta LV Pool data lvthinpool_tdata LV Status available # open 4 LV Size 150.00 GiB Allocated pool data 65.02% Allocated metadata 14.92% Current LE 38400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:5
--- Logical volume --- LV Path /dev/gluster/data LV Name data VG Name gluster LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 100.00 GiB Mapped size 90.28% Current LE 25600 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:7
--- Logical volume --- LV Path /dev/gluster/export LV Name export VG Name gluster LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8 LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 0.12% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:8
--- Logical volume --- LV Path /dev/gluster/iso LV Name iso VG Name gluster LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 28.86% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:9
--- Logical volume --- LV Path /dev/centos_ovirt/swap LV Name swap VG Name centos_ovirt LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 2 LV Size 16.00 GiB Current LE 4096 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1
--- Logical volume --- LV Path /dev/centos_ovirt/root LV Name root VG Name centos_ovirt LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 1 LV Size 20.00 GiB Current LE 5120 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0
------------
I don't use the export gluster volume, and I've never used lvthinpool-type allocations before, so I'm not sure if there's anything special there.
I followed the setup instructions from an ovirt contributed documentation that I can't find now that talked about how to install ovirt with gluster on a 3-node cluster.
Thank you for your assistance! --Jim
On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose@redhat.com> wrote:
On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot@redhat.com> wrote:
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim@palousetech.com> wrote:
hello:
I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a while now, and am now revisiting some aspects of it for ensuring that I have good reliability.
My cluster is a 3 node cluster, with gluster nodes running on each node. After running my cluster a bit, I'm realizing I didn't do a very optimal job of allocating the space on my disk to the different gluster mount points. Fortunately, they were created with LVM, so I'm hoping that I can resize them without much trouble.
I have a domain for iso, domain for export, and domain for storage, all thin provisioned; then a domain for the engine, not thin provisioned. I'd like to expand the storage domain, and possibly shrink the engine domain and make that space also available to the main storage domain. Is it as simple as expanding the LVM partition, or are there more steps involved? Do I need to take the node offline?
I didn't understand completely that part - what is the difference between the domain for storage and the domain for engine you mentioned?
I think the domain for engine is the one storing Hosted Engine data. You should be able to expand your underlying LVM partition without having to take the node offline
second, I've noticed that the first two nodes seem to have a full copy of the data (the disks are in use), but the 3rd node appears to not be using any of its storage space...It is participating in the gluster cluster, though.
Is the volume created as replica 3? If so, fully copy of the data should be present on all 3 nodes. Please provide the output of "gluster volume info"
Third, currently gluster shares the same network as the VM networks. I'd like to put it on its own network. I'm not sure how to do this, as when I tried to do it at install time, I never got the cluster to come online; I had to make them share the same network to make that work.
While creating the bricks the network intended for gluster should have been used to identify the brick in hostname:brick-directory. Changing this at a later point is a bit more involved. Please check online or on gluster-users on changing IP address associated with brick.
I'm adding Sahina who may shed some light on the gluster question, I'd try on the gluster mailing list as well.
Ovirt questions: I've noticed that recently, I don't appear to be getting software updates anymore. I used to get update available notifications on my nodes every few days; I haven't seen one for a couple weeks now. is something wrong?
I have a windows 10 x64 VM. I get a warning that my VM type does not match the installed OS. All works fine, but I've quadrouple-checked that it does match. Is this a known bug?
Arik, any info on that?
I have a UPS that all three nodes and the networking are on. It is a USB UPS. How should I best integrate monitoring in? I could put a raspberry pi up and then run NUT or similar on it, but is there a "better" way with oVirt?
Thanks! --Jim
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On Sat, Apr 1, 2017 at 10:32 PM, Jim Kusznir <jim@palousetech.com> wrote:
Thank you!
Here's the output of gluster volume info: [root@ovirt1 ~]# gluster volume info
Volume Name: data Type: Replicate Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick2/data Brick2: ovirt2.nwfiber.com:/gluster/brick2/data Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter) Options Reconfigured: performance.strict-o-direct: on nfs.disable: on user.cifs: off network.ping-timeout: 30 cluster.shd-max-threads: 6 cluster.shd-wait-qlength: 10000 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full performance.low-prio-threads: 32 features.shard-block-size: 512MB features.shard: on storage.owner-gid: 36 storage.owner-uid: 36 cluster.server-quorum-type: server cluster.quorum-type: auto network.remote-dio: enable cluster.eager-lock: enable performance.stat-prefetch: off performance.io-cache: off performance.read-ahead: off performance.quick-read: off performance.readdir-ahead: on server.allow-insecure: on
Volume Name: engine Type: Replicate Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: export Type: Replicate Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4 Status: Stopped Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick3/export Brick2: ovirt2.nwfiber.com:/gluster/brick3/export Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: iso Type: Replicate Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
The node marked as (arbiter) on all of the bricks is the node that is not using any of its disk space.
This is by design - the arbiter brick only stores metadata and hence saves on storage.
The engine domain is the volume dedicated for storing the hosted engine. Here's some LVM info:
--- Logical volume --- LV Path /dev/gluster/engine LV Name engine VG Name gluster LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800 LV Status available # open 1 LV Size 25.00 GiB Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2
--- Logical volume --- LV Name lvthinpool VG Name gluster LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800 LV Pool metadata lvthinpool_tmeta LV Pool data lvthinpool_tdata LV Status available # open 4 LV Size 150.00 GiB Allocated pool data 65.02% Allocated metadata 14.92% Current LE 38400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:5
--- Logical volume --- LV Path /dev/gluster/data LV Name data VG Name gluster LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 100.00 GiB Mapped size 90.28% Current LE 25600 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:7
--- Logical volume --- LV Path /dev/gluster/export LV Name export VG Name gluster LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8 LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 0.12% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:8
--- Logical volume --- LV Path /dev/gluster/iso LV Name iso VG Name gluster LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 28.86% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:9
--- Logical volume --- LV Path /dev/centos_ovirt/swap LV Name swap VG Name centos_ovirt LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 2 LV Size 16.00 GiB Current LE 4096 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1
--- Logical volume --- LV Path /dev/centos_ovirt/root LV Name root VG Name centos_ovirt LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 1 LV Size 20.00 GiB Current LE 5120 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0
------------
I don't use the export gluster volume, and I've never used lvthinpool-type allocations before, so I'm not sure if there's anything special there.
I followed the setup instructions from an ovirt contributed documentation that I can't find now that talked about how to install ovirt with gluster on a 3-node cluster.
Thank you for your assistance! --Jim
On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose@redhat.com> wrote:
On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot@redhat.com> wrote:
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim@palousetech.com> wrote:
hello:
I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a while now, and am now revisiting some aspects of it for ensuring that I have good reliability.
My cluster is a 3 node cluster, with gluster nodes running on each node. After running my cluster a bit, I'm realizing I didn't do a very optimal job of allocating the space on my disk to the different gluster mount points. Fortunately, they were created with LVM, so I'm hoping that I can resize them without much trouble.
I have a domain for iso, domain for export, and domain for storage, all thin provisioned; then a domain for the engine, not thin provisioned. I'd like to expand the storage domain, and possibly shrink the engine domain and make that space also available to the main storage domain. Is it as simple as expanding the LVM partition, or are there more steps involved? Do I need to take the node offline?
I didn't understand completely that part - what is the difference between the domain for storage and the domain for engine you mentioned?
I think the domain for engine is the one storing Hosted Engine data. You should be able to expand your underlying LVM partition without having to take the node offline
second, I've noticed that the first two nodes seem to have a full copy of the data (the disks are in use), but the 3rd node appears to not be using any of its storage space...It is participating in the gluster cluster, though.
Is the volume created as replica 3? If so, fully copy of the data should be present on all 3 nodes. Please provide the output of "gluster volume info"
Third, currently gluster shares the same network as the VM networks. I'd like to put it on its own network. I'm not sure how to do this, as when I tried to do it at install time, I never got the cluster to come online; I had to make them share the same network to make that work.
While creating the bricks the network intended for gluster should have been used to identify the brick in hostname:brick-directory. Changing this at a later point is a bit more involved. Please check online or on gluster-users on changing IP address associated with brick.
I'm adding Sahina who may shed some light on the gluster question, I'd try on the gluster mailing list as well.
Ovirt questions: I've noticed that recently, I don't appear to be getting software updates anymore. I used to get update available notifications on my nodes every few days; I haven't seen one for a couple weeks now. is something wrong?
I have a windows 10 x64 VM. I get a warning that my VM type does not match the installed OS. All works fine, but I've quadrouple-checked that it does match. Is this a known bug?
Arik, any info on that?
I have a UPS that all three nodes and the networking are on. It is a USB UPS. How should I best integrate monitoring in? I could put a raspberry pi up and then run NUT or similar on it, but is there a "better" way with oVirt?
Thanks! --Jim
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
So with arbiter, I actually only have two copies of data...Does arbiter have at least checksum or something to detect corruption of a copy? (like old RAID-4 disk configuration)? Ok...Related question: Is there a way to set up an offsite gluster storage server to mirror the contents of my main server? As "fire" insurance basically? (eventually, I'd like to have an "offsite" DR cluster, but I don't have the resources or scale yet for that). What I'd like to do is place a basic storage server somewhere else and have it sync any gluster data changes on a regular basis, and be usable to repopulate storage should I loose all of my current cluster (eg, a building fire or theft). I find gluster has amazing power from what I hear, but I have a hard time finding documentation at "the right level" to be useful. I've found some very basic introductory guide, then some very advanced guides that require extensive knowledge of gluster already. Something in the middle to explain some of these questions (like arbitrar and migration strategies, geo-replication, etc; and how to deploy them) are absent (or at least, i haven't found them yet). I still feel like I'm using something I don't understand, and the only avenue I have to learn more is to ask questions here, as the docs aren't at an accessible level. Thanks! --Jim On Mon, Apr 3, 2017 at 10:34 PM, Sahina Bose <sabose@redhat.com> wrote:
On Sat, Apr 1, 2017 at 10:32 PM, Jim Kusznir <jim@palousetech.com> wrote:
Thank you!
Here's the output of gluster volume info: [root@ovirt1 ~]# gluster volume info
Volume Name: data Type: Replicate Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick2/data Brick2: ovirt2.nwfiber.com:/gluster/brick2/data Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter) Options Reconfigured: performance.strict-o-direct: on nfs.disable: on user.cifs: off network.ping-timeout: 30 cluster.shd-max-threads: 6 cluster.shd-wait-qlength: 10000 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full performance.low-prio-threads: 32 features.shard-block-size: 512MB features.shard: on storage.owner-gid: 36 storage.owner-uid: 36 cluster.server-quorum-type: server cluster.quorum-type: auto network.remote-dio: enable cluster.eager-lock: enable performance.stat-prefetch: off performance.io-cache: off performance.read-ahead: off performance.quick-read: off performance.readdir-ahead: on server.allow-insecure: on
Volume Name: engine Type: Replicate Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: export Type: Replicate Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4 Status: Stopped Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick3/export Brick2: ovirt2.nwfiber.com:/gluster/brick3/export Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: iso Type: Replicate Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
The node marked as (arbiter) on all of the bricks is the node that is not using any of its disk space.
This is by design - the arbiter brick only stores metadata and hence saves on storage.
The engine domain is the volume dedicated for storing the hosted engine. Here's some LVM info:
--- Logical volume --- LV Path /dev/gluster/engine LV Name engine VG Name gluster LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800 LV Status available # open 1 LV Size 25.00 GiB Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2
--- Logical volume --- LV Name lvthinpool VG Name gluster LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800 LV Pool metadata lvthinpool_tmeta LV Pool data lvthinpool_tdata LV Status available # open 4 LV Size 150.00 GiB Allocated pool data 65.02% Allocated metadata 14.92% Current LE 38400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:5
--- Logical volume --- LV Path /dev/gluster/data LV Name data VG Name gluster LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 100.00 GiB Mapped size 90.28% Current LE 25600 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:7
--- Logical volume --- LV Path /dev/gluster/export LV Name export VG Name gluster LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8 LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 0.12% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:8
--- Logical volume --- LV Path /dev/gluster/iso LV Name iso VG Name gluster LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 28.86% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:9
--- Logical volume --- LV Path /dev/centos_ovirt/swap LV Name swap VG Name centos_ovirt LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 2 LV Size 16.00 GiB Current LE 4096 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1
--- Logical volume --- LV Path /dev/centos_ovirt/root LV Name root VG Name centos_ovirt LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 1 LV Size 20.00 GiB Current LE 5120 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0
------------
I don't use the export gluster volume, and I've never used lvthinpool-type allocations before, so I'm not sure if there's anything special there.
I followed the setup instructions from an ovirt contributed documentation that I can't find now that talked about how to install ovirt with gluster on a 3-node cluster.
Thank you for your assistance! --Jim
On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose@redhat.com> wrote:
On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot@redhat.com> wrote:
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim@palousetech.com> wrote:
hello:
I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a while now, and am now revisiting some aspects of it for ensuring that I have good reliability.
My cluster is a 3 node cluster, with gluster nodes running on each node. After running my cluster a bit, I'm realizing I didn't do a very optimal job of allocating the space on my disk to the different gluster mount points. Fortunately, they were created with LVM, so I'm hoping that I can resize them without much trouble.
I have a domain for iso, domain for export, and domain for storage, all thin provisioned; then a domain for the engine, not thin provisioned. I'd like to expand the storage domain, and possibly shrink the engine domain and make that space also available to the main storage domain. Is it as simple as expanding the LVM partition, or are there more steps involved? Do I need to take the node offline?
I didn't understand completely that part - what is the difference between the domain for storage and the domain for engine you mentioned?
I think the domain for engine is the one storing Hosted Engine data. You should be able to expand your underlying LVM partition without having to take the node offline
second, I've noticed that the first two nodes seem to have a full copy of the data (the disks are in use), but the 3rd node appears to not be using any of its storage space...It is participating in the gluster cluster, though.
Is the volume created as replica 3? If so, fully copy of the data should be present on all 3 nodes. Please provide the output of "gluster volume info"
Third, currently gluster shares the same network as the VM networks. I'd like to put it on its own network. I'm not sure how to do this, as when I tried to do it at install time, I never got the cluster to come online; I had to make them share the same network to make that work.
While creating the bricks the network intended for gluster should have been used to identify the brick in hostname:brick-directory. Changing this at a later point is a bit more involved. Please check online or on gluster-users on changing IP address associated with brick.
I'm adding Sahina who may shed some light on the gluster question, I'd try on the gluster mailing list as well.
Ovirt questions: I've noticed that recently, I don't appear to be getting software updates anymore. I used to get update available notifications on my nodes every few days; I haven't seen one for a couple weeks now. is something wrong?
I have a windows 10 x64 VM. I get a warning that my VM type does not match the installed OS. All works fine, but I've quadrouple-checked that it does match. Is this a known bug?
Arik, any info on that?
I have a UPS that all three nodes and the networking are on. It is a USB UPS. How should I best integrate monitoring in? I could put a raspberry pi up and then run NUT or similar on it, but is there a "better" way with oVirt?
Thanks! --Jim
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On Tue, Apr 25, 2017 at 9:18 PM, Jim Kusznir <jim@palousetech.com> wrote:
So with arbiter, I actually only have two copies of data...Does arbiter have at least checksum or something to detect corruption of a copy? (like old RAID-4 disk configuration)?
Yes, the arbiter brick stores metadata information about the files to decide the good copy of data stored on the replicas in case of conflict.
Ok...Related question: Is there a way to set up an offsite gluster storage server to mirror the contents of my main server? As "fire" insurance basically? (eventually, I'd like to have an "offsite" DR cluster, but I don't have the resources or scale yet for that).
What I'd like to do is place a basic storage server somewhere else and have it sync any gluster data changes on a regular basis, and be usable to repopulate storage should I loose all of my current cluster (eg, a building fire or theft).
Yes, the geo-replication feature can help with that. There's a remote data sync feature introduced for gluster storage domains, that helps with this. You can set this up such that data from your storage domain is regularly synced to a remote gluster volume, while ensuring data consistency. The remote gluster volume does not have to a replica 3.
I find gluster has amazing power from what I hear, but I have a hard time finding documentation at "the right level" to be useful. I've found some very basic introductory guide, then some very advanced guides that require extensive knowledge of gluster already. Something in the middle to explain some of these questions (like arbitrar and migration strategies, geo-replication, etc; and how to deploy them) are absent (or at least, i haven't found them yet). I still feel like I'm using something I don't understand, and the only avenue I have to learn more is to ask questions here, as the docs aren't at an accessible level.
Thanks for the feedback. Are you looking at documentation on a use-case basis?
Thanks! --Jim
On Mon, Apr 3, 2017 at 10:34 PM, Sahina Bose <sabose@redhat.com> wrote:
On Sat, Apr 1, 2017 at 10:32 PM, Jim Kusznir <jim@palousetech.com> wrote:
Thank you!
Here's the output of gluster volume info: [root@ovirt1 ~]# gluster volume info
Volume Name: data Type: Replicate Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick2/data Brick2: ovirt2.nwfiber.com:/gluster/brick2/data Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter) Options Reconfigured: performance.strict-o-direct: on nfs.disable: on user.cifs: off network.ping-timeout: 30 cluster.shd-max-threads: 6 cluster.shd-wait-qlength: 10000 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full performance.low-prio-threads: 32 features.shard-block-size: 512MB features.shard: on storage.owner-gid: 36 storage.owner-uid: 36 cluster.server-quorum-type: server cluster.quorum-type: auto network.remote-dio: enable cluster.eager-lock: enable performance.stat-prefetch: off performance.io-cache: off performance.read-ahead: off performance.quick-read: off performance.readdir-ahead: on server.allow-insecure: on
Volume Name: engine Type: Replicate Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: export Type: Replicate Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4 Status: Stopped Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick3/export Brick2: ovirt2.nwfiber.com:/gluster/brick3/export Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: iso Type: Replicate Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
The node marked as (arbiter) on all of the bricks is the node that is not using any of its disk space.
This is by design - the arbiter brick only stores metadata and hence saves on storage.
The engine domain is the volume dedicated for storing the hosted engine. Here's some LVM info:
--- Logical volume --- LV Path /dev/gluster/engine LV Name engine VG Name gluster LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800 LV Status available # open 1 LV Size 25.00 GiB Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2
--- Logical volume --- LV Name lvthinpool VG Name gluster LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800 LV Pool metadata lvthinpool_tmeta LV Pool data lvthinpool_tdata LV Status available # open 4 LV Size 150.00 GiB Allocated pool data 65.02% Allocated metadata 14.92% Current LE 38400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:5
--- Logical volume --- LV Path /dev/gluster/data LV Name data VG Name gluster LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 100.00 GiB Mapped size 90.28% Current LE 25600 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:7
--- Logical volume --- LV Path /dev/gluster/export LV Name export VG Name gluster LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8 LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 0.12% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:8
--- Logical volume --- LV Path /dev/gluster/iso LV Name iso VG Name gluster LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 28.86% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:9
--- Logical volume --- LV Path /dev/centos_ovirt/swap LV Name swap VG Name centos_ovirt LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 2 LV Size 16.00 GiB Current LE 4096 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1
--- Logical volume --- LV Path /dev/centos_ovirt/root LV Name root VG Name centos_ovirt LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 1 LV Size 20.00 GiB Current LE 5120 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0
------------
I don't use the export gluster volume, and I've never used lvthinpool-type allocations before, so I'm not sure if there's anything special there.
I followed the setup instructions from an ovirt contributed documentation that I can't find now that talked about how to install ovirt with gluster on a 3-node cluster.
Thank you for your assistance! --Jim
On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose@redhat.com> wrote:
On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot@redhat.com> wrote:
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim@palousetech.com> wrote:
hello:
I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a while now, and am now revisiting some aspects of it for ensuring that I have good reliability.
My cluster is a 3 node cluster, with gluster nodes running on each node. After running my cluster a bit, I'm realizing I didn't do a very optimal job of allocating the space on my disk to the different gluster mount points. Fortunately, they were created with LVM, so I'm hoping that I can resize them without much trouble.
I have a domain for iso, domain for export, and domain for storage, all thin provisioned; then a domain for the engine, not thin provisioned. I'd like to expand the storage domain, and possibly shrink the engine domain and make that space also available to the main storage domain. Is it as simple as expanding the LVM partition, or are there more steps involved? Do I need to take the node offline?
I didn't understand completely that part - what is the difference between the domain for storage and the domain for engine you mentioned?
I think the domain for engine is the one storing Hosted Engine data. You should be able to expand your underlying LVM partition without having to take the node offline
second, I've noticed that the first two nodes seem to have a full copy of the data (the disks are in use), but the 3rd node appears to not be using any of its storage space...It is participating in the gluster cluster, though.
Is the volume created as replica 3? If so, fully copy of the data should be present on all 3 nodes. Please provide the output of "gluster volume info"
Third, currently gluster shares the same network as the VM networks. I'd like to put it on its own network. I'm not sure how to do this, as when I tried to do it at install time, I never got the cluster to come online; I had to make them share the same network to make that work.
While creating the bricks the network intended for gluster should have been used to identify the brick in hostname:brick-directory. Changing this at a later point is a bit more involved. Please check online or on gluster-users on changing IP address associated with brick.
I'm adding Sahina who may shed some light on the gluster question, I'd try on the gluster mailing list as well.
Ovirt questions: I've noticed that recently, I don't appear to be getting software updates anymore. I used to get update available notifications on my nodes every few days; I haven't seen one for a couple weeks now. is something wrong?
I have a windows 10 x64 VM. I get a warning that my VM type does not match the installed OS. All works fine, but I've quadrouple-checked that it does match. Is this a known bug?
Arik, any info on that?
I have a UPS that all three nodes and the networking are on. It is a USB UPS. How should I best integrate monitoring in? I could put a raspberry pi up and then run NUT or similar on it, but is there a "better" way with oVirt?
Thanks! --Jim
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Thank you for your response! With the right magic word "geo-replication", I was able to find a howto that appears to be what I need to get started. As to the documentation, some more use-case docs would be helpful. I also find myself struggling to understand it at a level to feel comfortable admining it. For example, I followed a howto to get my current gluster stuff running, but just barely, and I still don't truely understand the components or how to make them work. My system is 3 node ovirt cluster with gluster bricks located on the same nodes (and node 3 is the arbitrar apparently). I was trying to set up gluster to ride on its own network instead of sharing the ovirt main network. Unfortunately, I never could get that to work, and now that it is in production, I don't have the slightest on where to look to cause gluster to use a different network interface already configured and up on the servers. I'm not even sure I know what tools to use at the command line level to ensure gluster is healthy, and should something happen, I'd probably have to post panicked e-mails here.... I also am not sure I understand gluster well enough to architect a system under new assumptions. My current configuration was always intended to be a "phase 1" to get my cluster online and thus start and grow my business. However, my current storage is very limited. So, what should my target be for a "better" cluster? Single server, or dual? If I grow to the point where I have multiple clusters at different offices (connected by fiber I own), how should I architect the storage then such that VMs can be moved between clusters, and my clusters 'back each other up"? I could use geo-replication, but is that the best/proper way? If I build dedicated servers, do I need more than one gluster storage server per location? This is a lot I just threw out there...These questions have all passed through my head, but I haven't found enough details to answer them myself. I'm slowly growing in a few areas; this geo-replication configuration will be my next growth. I would like to move my gluster to another network, and I think I found some of the files where relevant configs are stored, but not enough detail to feel comfortable without breaking what I have. I realized that most systems I've set up, the docs are a bit less "recipie"-ish and have more explanation interspersed with the commands, and intermediate checks (with explanations) to check your work as you go. These are extremely valuable to me. For example, if my initial configuration instructions had a paragraph about the network architecture, different settings (eg, gluster-gluster node sync vs management interface that ovirt uses vs data access for clients), and then walks through configuring each one, then showed the command line instructions to check that was working correctly before moving on to the next stage, that would help me understand what I've done, and be more likely to maintain it. It also makes other docs more understandable given a deeper knowledge of what I've already done. Its possible that the instructions I used may have been poorer than typical for the project, but my googling didn't turn up something that allowed me to figure it out before I posted my original e-mail. Thanks for your help! --Jim On Tue, Apr 25, 2017 at 10:02 AM, Sahina Bose <sabose@redhat.com> wrote:
On Tue, Apr 25, 2017 at 9:18 PM, Jim Kusznir <jim@palousetech.com> wrote:
So with arbiter, I actually only have two copies of data...Does arbiter have at least checksum or something to detect corruption of a copy? (like old RAID-4 disk configuration)?
Yes, the arbiter brick stores metadata information about the files to decide the good copy of data stored on the replicas in case of conflict.
Ok...Related question: Is there a way to set up an offsite gluster storage server to mirror the contents of my main server? As "fire" insurance basically? (eventually, I'd like to have an "offsite" DR cluster, but I don't have the resources or scale yet for that).
What I'd like to do is place a basic storage server somewhere else and have it sync any gluster data changes on a regular basis, and be usable to repopulate storage should I loose all of my current cluster (eg, a building fire or theft).
Yes, the geo-replication feature can help with that. There's a remote data sync feature introduced for gluster storage domains, that helps with this. You can set this up such that data from your storage domain is regularly synced to a remote gluster volume, while ensuring data consistency. The remote gluster volume does not have to a replica 3.
I find gluster has amazing power from what I hear, but I have a hard time finding documentation at "the right level" to be useful. I've found some very basic introductory guide, then some very advanced guides that require extensive knowledge of gluster already. Something in the middle to explain some of these questions (like arbitrar and migration strategies, geo-replication, etc; and how to deploy them) are absent (or at least, i haven't found them yet). I still feel like I'm using something I don't understand, and the only avenue I have to learn more is to ask questions here, as the docs aren't at an accessible level.
Thanks for the feedback. Are you looking at documentation on a use-case basis?
Thanks! --Jim
On Mon, Apr 3, 2017 at 10:34 PM, Sahina Bose <sabose@redhat.com> wrote:
On Sat, Apr 1, 2017 at 10:32 PM, Jim Kusznir <jim@palousetech.com> wrote:
Thank you!
Here's the output of gluster volume info: [root@ovirt1 ~]# gluster volume info
Volume Name: data Type: Replicate Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick2/data Brick2: ovirt2.nwfiber.com:/gluster/brick2/data Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter) Options Reconfigured: performance.strict-o-direct: on nfs.disable: on user.cifs: off network.ping-timeout: 30 cluster.shd-max-threads: 6 cluster.shd-wait-qlength: 10000 cluster.locking-scheme: granular cluster.data-self-heal-algorithm: full performance.low-prio-threads: 32 features.shard-block-size: 512MB features.shard: on storage.owner-gid: 36 storage.owner-uid: 36 cluster.server-quorum-type: server cluster.quorum-type: auto network.remote-dio: enable cluster.eager-lock: enable performance.stat-prefetch: off performance.io-cache: off performance.read-ahead: off performance.quick-read: off performance.readdir-ahead: on server.allow-insecure: on
Volume Name: engine Type: Replicate Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: export Type: Replicate Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4 Status: Stopped Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick3/export Brick2: ovirt2.nwfiber.com:/gluster/brick3/export Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
Volume Name: iso Type: Replicate Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92 Status: Started Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter) Options Reconfigured: performance.readdir-ahead: on performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: off cluster.quorum-type: auto cluster.server-quorum-type: server storage.owner-uid: 36 storage.owner-gid: 36 features.shard: on features.shard-block-size: 512MB performance.low-prio-threads: 32 cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-wait-qlength: 10000 cluster.shd-max-threads: 6 network.ping-timeout: 30 user.cifs: off nfs.disable: on performance.strict-o-direct: on
The node marked as (arbiter) on all of the bricks is the node that is not using any of its disk space.
This is by design - the arbiter brick only stores metadata and hence saves on storage.
The engine domain is the volume dedicated for storing the hosted engine. Here's some LVM info:
--- Logical volume --- LV Path /dev/gluster/engine LV Name engine VG Name gluster LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800 LV Status available # open 1 LV Size 25.00 GiB Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2
--- Logical volume --- LV Name lvthinpool VG Name gluster LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800 LV Pool metadata lvthinpool_tmeta LV Pool data lvthinpool_tdata LV Status available # open 4 LV Size 150.00 GiB Allocated pool data 65.02% Allocated metadata 14.92% Current LE 38400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:5
--- Logical volume --- LV Path /dev/gluster/data LV Name data VG Name gluster LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 100.00 GiB Mapped size 90.28% Current LE 25600 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:7
--- Logical volume --- LV Path /dev/gluster/export LV Name export VG Name gluster LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8 LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 0.12% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:8
--- Logical volume --- LV Path /dev/gluster/iso LV Name iso VG Name gluster LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX LV Write Access read/write LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800 LV Pool name lvthinpool LV Status available # open 1 LV Size 25.00 GiB Mapped size 28.86% Current LE 6400 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:9
--- Logical volume --- LV Path /dev/centos_ovirt/swap LV Name swap VG Name centos_ovirt LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 2 LV Size 16.00 GiB Current LE 4096 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1
--- Logical volume --- LV Path /dev/centos_ovirt/root LV Name root VG Name centos_ovirt LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly LV Write Access read/write LV Creation host, time localhost, 2016-12-31 13:56:36 -0800 LV Status available # open 1 LV Size 20.00 GiB Current LE 5120 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0
------------
I don't use the export gluster volume, and I've never used lvthinpool-type allocations before, so I'm not sure if there's anything special there.
I followed the setup instructions from an ovirt contributed documentation that I can't find now that talked about how to install ovirt with gluster on a 3-node cluster.
Thank you for your assistance! --Jim
On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose@redhat.com> wrote:
On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot@redhat.com> wrote:
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim@palousetech.com> wrote:
> hello: > > I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for > a while now, and am now revisiting some aspects of it for ensuring that I > have good reliability. > > My cluster is a 3 node cluster, with gluster nodes running on each > node. After running my cluster a bit, I'm realizing I didn't do a very > optimal job of allocating the space on my disk to the different gluster > mount points. Fortunately, they were created with LVM, so I'm hoping that > I can resize them without much trouble. > > I have a domain for iso, domain for export, and domain for storage, > all thin provisioned; then a domain for the engine, not thin provisioned. > I'd like to expand the storage domain, and possibly shrink the engine > domain and make that space also available to the main storage domain. Is > it as simple as expanding the LVM partition, or are there more steps > involved? Do I need to take the node offline? >
I didn't understand completely that part - what is the difference between the domain for storage and the domain for engine you mentioned?
I think the domain for engine is the one storing Hosted Engine data. You should be able to expand your underlying LVM partition without having to take the node offline
> second, I've noticed that the first two nodes seem to have a full > copy of the data (the disks are in use), but the 3rd node appears to not be > using any of its storage space...It is participating in the gluster > cluster, though. >
Is the volume created as replica 3? If so, fully copy of the data should be present on all 3 nodes. Please provide the output of "gluster volume info"
> Third, currently gluster shares the same network as the VM > networks. I'd like to put it on its own network. I'm not sure how to do > this, as when I tried to do it at install time, I never got the cluster to > come online; I had to make them share the same network to make that work. >
While creating the bricks the network intended for gluster should have been used to identify the brick in hostname:brick-directory. Changing this at a later point is a bit more involved. Please check online or on gluster-users on changing IP address associated with brick.
I'm adding Sahina who may shed some light on the gluster question, I'd try on the gluster mailing list as well.
> > > Ovirt questions: > I've noticed that recently, I don't appear to be getting software > updates anymore. I used to get update available notifications on my nodes > every few days; I haven't seen one for a couple weeks now. is something > wrong? > > I have a windows 10 x64 VM. I get a warning that my VM type does > not match the installed OS. All works fine, but I've quadrouple-checked > that it does match. Is this a known bug? >
Arik, any info on that?
> > I have a UPS that all three nodes and the networking are on. It is > a USB UPS. How should I best integrate monitoring in? I could put a > raspberry pi up and then run NUT or similar on it, but is there a "better" > way with oVirt? > > Thanks! > --Jim > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > >
On Thursday, March 30, 2017 3:53:47 AM EDT Liron Aravot wrote:
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim@palousetech.com> wrote:
hello:
I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a while now, and am now revisiting some aspects of it for ensuring that I have good reliability.
My cluster is a 3 node cluster, with gluster nodes running on each node. After running my cluster a bit, I'm realizing I didn't do a very optimal job of allocating the space on my disk to the different gluster mount points. Fortunately, they were created with LVM, so I'm hoping that I can resize them without much trouble.
I have a domain for iso, domain for export, and domain for storage, all thin provisioned; then a domain for the engine, not thin provisioned. I'd like to expand the storage domain, and possibly shrink the engine domain and make that space also available to the main storage domain. Is it as simple as expanding the LVM partition, or are there more steps involved? Do I need to take the node offline?
I didn't understand completely that part - what is the difference between the domain for storage and the domain for engine you mentioned?
second, I've noticed that the first two nodes seem to have a full copy of the data (the disks are in use), but the 3rd node appears to not be using any of its storage space...It is participating in the gluster cluster, though.
Third, currently gluster shares the same network as the VM networks. I'd like to put it on its own network. I'm not sure how to do this, as when I tried to do it at install time, I never got the cluster to come online; I had to make them share the same network to make that work.
I'm adding Sahina who may shed some light on the gluster question, I'd try on the gluster mailing list as well.
Ovirt questions: I've noticed that recently, I don't appear to be getting software updates anymore. I used to get update available notifications on my nodes every few days; I haven't seen one for a couple weeks now. is something wrong?
I have a windows 10 x64 VM. I get a warning that my VM type does not match the installed OS. All works fine, but I've quadrouple-checked that it does match. Is this a known bug?
Do you have the ovirt-guest-agent installed and running on that windows VM? If not that is highly likely the cause for the warning.
Arik, any info on that?
I have a UPS that all three nodes and the networking are on. It is a USB UPS. How should I best integrate monitoring in? I could put a raspberry pi up and then run NUT or similar on it, but is there a "better" way with oVirt?
Thanks! --Jim
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
participants (4)
-
Alexander Wels -
Jim Kusznir -
Liron Aravot -
Sahina Bose