8:08 p.m.
hello:
I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a while
now, and am now revisiting some aspects of it for ensuring that I have good
reliability.
My cluster is a 3 node cluster, with gluster nodes running on each node.
After running my cluster a bit, I'm realizing I didn't do a very optimal
job of allocating the space on my disk to the different gluster mount
points. Fortunately, they were created with LVM, so I'm hoping that I can
resize them without much trouble.
I have a domain for iso, domain for export, and domain for storage, all
thin provisioned; then a domain for the engine, not thin provisioned. I'd
like to expand the storage domain, and possibly shrink the engine domain
and make that space also available to the main storage domain. Is it as
simple as expanding the LVM partition, or are there more steps involved?
Do I need to take the node offline?
second, I've noticed that the first two nodes seem to have a full copy of
the data (the disks are in use), but the 3rd node appears to not be using
any of its storage space...It is participating in the gluster cluster,
though.
Third, currently gluster shares the same network as the VM networks. I'd
like to put it on its own network. I'm not sure how to do this, as when I
tried to do it at install time, I never got the cluster to come online; I
had to make them share the same network to make that work.
Ovirt questions:
I've noticed that recently, I don't appear to be getting software updates
anymore. I used to get update available notifications on my nodes every
few days; I haven't seen one for a couple weeks now. is something wrong?
I have a windows 10 x64 VM. I get a warning that my VM type does not match
the installed OS. All works fine, but I've quadrouple-checked that it does
match. Is this a known bug?
I have a UPS that all three nodes and the networking are on. It is a USB
UPS. How should I best integrate monitoring in? I could put a raspberry
pi up and then run NUT or similar on it, but is there a "better" way with
oVirt?
Thanks!
--Jim
2:53 a.m.
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim(a)palousetech.com> wrote:
hello:
I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a
while now, and am now revisiting some aspects of it for ensuring that I
have good reliability.
My cluster is a 3 node cluster, with gluster nodes running on each node.
After running my cluster a bit, I'm realizing I didn't do a very optimal
job of allocating the space on my disk to the different gluster mount
points. Fortunately, they were created with LVM, so I'm hoping that I can
resize them without much trouble.
I have a domain for iso, domain for export, and domain for storage, all
thin provisioned; then a domain for the engine, not thin provisioned. I'd
like to expand the storage domain, and possibly shrink the engine domain
and make that space also available to the main storage domain. Is it as
simple as expanding the LVM partition, or are there more steps involved?
Do I need to take the node offline?
I didn't understand completely that part - what is the difference between
the domain for storage and the domain for engine you mentioned?
second, I've noticed that the first two nodes seem to have a full copy of
the data (the disks are in use), but the 3rd node appears to not be using
any of its storage space...It is participating in the gluster cluster,
though.
Third, currently gluster shares the same network as the VM networks. I'd
like to put it on its own network. I'm not sure how to do this, as when I
tried to do it at install time, I never got the cluster to come online; I
had to make them share the same network to make that work.
I'm adding Sahina who may shed some light on the gluster question, I'd try
on the gluster mailing list as well.
Ovirt questions:
I've noticed that recently, I don't appear to be getting software updates
anymore. I used to get update available notifications on my nodes every
few days; I haven't seen one for a couple weeks now. is something wrong?
I have a windows 10 x64 VM. I get a warning that my VM type does not
match the installed OS. All works fine, but I've quadrouple-checked that
it does match. Is this a known bug?
Arik, any info on that?
I have a UPS that all three nodes and the networking are on. It is a USB
UPS. How should I best integrate monitoring in? I could put a raspberry
pi up and then run NUT or similar on it, but is there a "better" way with
oVirt?
Thanks!
--Jim
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3:27 a.m.
On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot(a)redhat.com> wrote:
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim(a)palousetech.com> wrote:
> hello:
>
> I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a
> while now, and am now revisiting some aspects of it for ensuring that I
> have good reliability.
>
> My cluster is a 3 node cluster, with gluster nodes running on each node.
> After running my cluster a bit, I'm realizing I didn't do a very optimal
> job of allocating the space on my disk to the different gluster mount
> points. Fortunately, they were created with LVM, so I'm hoping that I can
> resize them without much trouble.
>
> I have a domain for iso, domain for export, and domain for storage, all
> thin provisioned; then a domain for the engine, not thin provisioned. I'd
> like to expand the storage domain, and possibly shrink the engine domain
> and make that space also available to the main storage domain. Is it as
> simple as expanding the LVM partition, or are there more steps involved?
> Do I need to take the node offline?
>
I didn't understand completely that part - what is the difference between
the domain for storage and the domain for engine you mentioned?
I think the domain for engine is the one storing Hosted Engine data.
You should be able to expand your underlying LVM partition without having
to take the node offline
> second, I've noticed that the first two nodes seem to have a full copy of
> the data (the disks are in use), but the 3rd node appears to not be using
> any of its storage space...It is participating in the gluster cluster,
> though.
>
Is the volume created as replica 3? If so, fully copy of the data should be
present on all 3 nodes. Please provide the output of "gluster volume info"
> Third, currently gluster shares the same network as the VM
networks. I'd
> like to put it on its own network. I'm not sure how to do this, as when I
> tried to do it at install time, I never got the cluster to come online; I
> had to make them share the same network to make that work.
>
While creating the bricks the network intended for gluster should have been
used to identify the brick in hostname:brick-directory. Changing this at a
later point is a bit more involved. Please check online or on gluster-users
on changing IP address associated with brick.
I'm adding Sahina who may shed some light on the gluster question, I'd try
on the gluster mailing list as well.
>
>
> Ovirt questions:
> I've noticed that recently, I don't appear to be getting software updates
> anymore. I used to get update available notifications on my nodes every
> few days; I haven't seen one for a couple weeks now. is something wrong?
>
> I have a windows 10 x64 VM. I get a warning that my VM type does not
> match the installed OS. All works fine, but I've quadrouple-checked that
> it does match. Is this a known bug?
>
Arik, any info on that?
>
> I have a UPS that all three nodes and the networking are on. It is a USB
> UPS. How should I best integrate monitoring in? I could put a raspberry
> pi up and then run NUT or similar on it, but is there a "better" way with
> oVirt?
>
> Thanks!
> --Jim
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
7:02 a.m.
On Thursday, March 30, 2017 3:53:47 AM EDT Liron Aravot wrote:
Hi Jim, please see inline
On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim(a)palousetech.com> wrote:
> hello:
>
> I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a
> while now, and am now revisiting some aspects of it for ensuring that I
> have good reliability.
>
> My cluster is a 3 node cluster, with gluster nodes running on each node.
> After running my cluster a bit, I'm realizing I didn't do a very optimal
> job of allocating the space on my disk to the different gluster mount
> points. Fortunately, they were created with LVM, so I'm hoping that I can
> resize them without much trouble.
>
> I have a domain for iso, domain for export, and domain for storage, all
> thin provisioned; then a domain for the engine, not thin provisioned. I'd
> like to expand the storage domain, and possibly shrink the engine domain
> and make that space also available to the main storage domain. Is it as
> simple as expanding the LVM partition, or are there more steps involved?
> Do I need to take the node offline?
I didn't understand completely that part - what is the difference between
the domain for storage and the domain for engine you mentioned?
> second, I've noticed that the first two nodes seem to have a full copy of
> the data (the disks are in use), but the 3rd node appears to not be using
> any of its storage space...It is participating in the gluster cluster,
> though.
>
> Third, currently gluster shares the same network as the VM networks. I'd
> like to put it on its own network. I'm not sure how to do this, as when I
> tried to do it at install time, I never got the cluster to come online; I
> had to make them share the same network to make that work.
I'm adding Sahina who may shed some light on the gluster question, I'd try
on the gluster mailing list as well.
> Ovirt questions:
> I've noticed that recently, I don't appear to be getting software updates
> anymore. I used to get update available notifications on my nodes every
> few days; I haven't seen one for a couple weeks now. is something wrong?
>
> I have a windows 10 x64 VM. I get a warning that my VM type does not
> match the installed OS. All works fine, but I've quadrouple-checked that
> it does match. Is this a known bug?
Do you have the ovirt-guest-agent installed and running on that windows VM? If
not that is highly likely the cause for the warning.
Arik, any info on that?
> I have a UPS that all three nodes and the networking are on. It is a USB
> UPS. How should I best integrate monitoring in? I could put a raspberry
> pi up and then run NUT or similar on it, but is there a "better" way with
> oVirt?
>
> Thanks!
> --Jim
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
12:02 p.m.
Thank you!
Here's the output of gluster volume info:
[root@ovirt1 ~]# gluster volume info
Volume Name: data
Type: Replicate
Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59
Status: Started
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick2/data
Brick2: ovirt2.nwfiber.com:/gluster/brick2/data
Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter)
Options Reconfigured:
performance.strict-o-direct: on
nfs.disable: on
user.cifs: off
network.ping-timeout: 30
cluster.shd-max-threads: 6
cluster.shd-wait-qlength: 10000
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
performance.low-prio-threads: 32
features.shard-block-size: 512MB
features.shard: on
storage.owner-gid: 36
storage.owner-uid: 36
cluster.server-quorum-type: server
cluster.quorum-type: auto
network.remote-dio: enable
cluster.eager-lock: enable
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
performance.readdir-ahead: on
server.allow-insecure: on
Volume Name: engine
Type: Replicate
Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de
Status: Started
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine
Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine
Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter)
Options Reconfigured:
performance.readdir-ahead: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: off
cluster.quorum-type: auto
cluster.server-quorum-type: server
storage.owner-uid: 36
storage.owner-gid: 36
features.shard: on
features.shard-block-size: 512MB
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 6
network.ping-timeout: 30
user.cifs: off
nfs.disable: on
performance.strict-o-direct: on
Volume Name: export
Type: Replicate
Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4
Status: Stopped
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick3/export
Brick2: ovirt2.nwfiber.com:/gluster/brick3/export
Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter)
Options Reconfigured:
performance.readdir-ahead: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: off
cluster.quorum-type: auto
cluster.server-quorum-type: server
storage.owner-uid: 36
storage.owner-gid: 36
features.shard: on
features.shard-block-size: 512MB
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 6
network.ping-timeout: 30
user.cifs: off
nfs.disable: on
performance.strict-o-direct: on
Volume Name: iso
Type: Replicate
Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92
Status: Started
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso
Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso
Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter)
Options Reconfigured:
performance.readdir-ahead: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: off
cluster.quorum-type: auto
cluster.server-quorum-type: server
storage.owner-uid: 36
storage.owner-gid: 36
features.shard: on
features.shard-block-size: 512MB
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 6
network.ping-timeout: 30
user.cifs: off
nfs.disable: on
performance.strict-o-direct: on
The node marked as (arbiter) on all of the bricks is the node that is not
using any of its disk space.
The engine domain is the volume dedicated for storing the hosted engine.
Here's some LVM info:
--- Logical volume ---
LV Path /dev/gluster/engine
LV Name engine
VG Name gluster
LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800
LV Status available
# open 1
LV Size 25.00 GiB
Current LE 6400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:2
--- Logical volume ---
LV Name lvthinpool
VG Name gluster
LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800
LV Pool metadata lvthinpool_tmeta
LV Pool data lvthinpool_tdata
LV Status available
# open 4
LV Size 150.00 GiB
Allocated pool data 65.02%
Allocated metadata 14.92%
Current LE 38400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:5
--- Logical volume ---
LV Path /dev/gluster/data
LV Name data
VG Name gluster
LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800
LV Pool name lvthinpool
LV Status available
# open 1
LV Size 100.00 GiB
Mapped size 90.28%
Current LE 25600
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:7
--- Logical volume ---
LV Path /dev/gluster/export
LV Name export
VG Name gluster
LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800
LV Pool name lvthinpool
LV Status available
# open 1
LV Size 25.00 GiB
Mapped size 0.12%
Current LE 6400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:8
--- Logical volume ---
LV Path /dev/gluster/iso
LV Name iso
VG Name gluster
LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800
LV Pool name lvthinpool
LV Status available
# open 1
LV Size 25.00 GiB
Mapped size 28.86%
Current LE 6400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:9
--- Logical volume ---
LV Path /dev/centos_ovirt/swap
LV Name swap
VG Name centos_ovirt
LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ
LV Write Access read/write
LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
LV Status available
# open 2
LV Size 16.00 GiB
Current LE 4096
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1
--- Logical volume ---
LV Path /dev/centos_ovirt/root
LV Name root
VG Name centos_ovirt
LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly
LV Write Access read/write
LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
LV Status available
# open 1
LV Size 20.00 GiB
Current LE 5120
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0
------------
I don't use the export gluster volume, and I've never used lvthinpool-type
allocations before, so I'm not sure if there's anything special there.
I followed the setup instructions from an ovirt contributed documentation
that I can't find now that talked about how to install ovirt with gluster
on a 3-node cluster.
Thank you for your assistance!
--Jim
On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose(a)redhat.com> wrote:
On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot(a)redhat.com> wrote:
> Hi Jim, please see inline
>
> On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim(a)palousetech.com> wrote:
>
>> hello:
>>
>> I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a
>> while now, and am now revisiting some aspects of it for ensuring that I
>> have good reliability.
>>
>> My cluster is a 3 node cluster, with gluster nodes running on each
>> node. After running my cluster a bit, I'm realizing I didn't do a very
>> optimal job of allocating the space on my disk to the different gluster
>> mount points. Fortunately, they were created with LVM, so I'm hoping that
>> I can resize them without much trouble.
>>
>> I have a domain for iso, domain for export, and domain for storage, all
>> thin provisioned; then a domain for the engine, not thin provisioned. I'd
>> like to expand the storage domain, and possibly shrink the engine domain
>> and make that space also available to the main storage domain. Is it as
>> simple as expanding the LVM partition, or are there more steps involved?
>> Do I need to take the node offline?
>>
>
> I didn't understand completely that part - what is the difference between
> the domain for storage and the domain for engine you mentioned?
>
I think the domain for engine is the one storing Hosted Engine data.
You should be able to expand your underlying LVM partition without having
to take the node offline
>
>> second, I've noticed that the first two nodes seem to have a full copy
>> of the data (the disks are in use), but the 3rd node appears to not be
>> using any of its storage space...It is participating in the gluster
>> cluster, though.
>>
>
Is the volume created as replica 3? If so, fully copy of the data should
be present on all 3 nodes. Please provide the output of "gluster volume
info"
>> Third, currently gluster shares the same network as the VM networks.
>> I'd like to put it on its own network. I'm not sure how to do this, as
>> when I tried to do it at install time, I never got the cluster to come
>> online; I had to make them share the same network to make that work.
>>
>
While creating the bricks the network intended for gluster should have
been used to identify the brick in hostname:brick-directory. Changing this
at a later point is a bit more involved. Please check online or on
gluster-users on changing IP address associated with brick.
>
> I'm adding Sahina who may shed some light on the gluster question, I'd
> try on the gluster mailing list as well.
>
>>
>>
>> Ovirt questions:
>> I've noticed that recently, I don't appear to be getting software
>> updates anymore. I used to get update available notifications on my nodes
>> every few days; I haven't seen one for a couple weeks now. is something
>> wrong?
>>
>> I have a windows 10 x64 VM. I get a warning that my VM type does not
>> match the installed OS. All works fine, but I've quadrouple-checked that
>> it does match. Is this a known bug?
>>
>
> Arik, any info on that?
>
>>
>> I have a UPS that all three nodes and the networking are on. It is a
>> USB UPS. How should I best integrate monitoring in? I could put a
>> raspberry pi up and then run NUT or similar on it, but is there a
"better"
>> way with oVirt?
>>
>> Thanks!
>> --Jim
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
12:38 p.m.
Based on the suggestions here, I did successfully remove the unused export
gluster brick and allocate all otherwise unassigned space to my data
export, then used xfs_growfs to realize the new size. This should hold me
for a while longer before building a "proper" storage solution.
--Jim
On Sat, Apr 1, 2017 at 10:02 AM, Jim Kusznir <jim(a)palousetech.com> wrote:
Thank you!
Here's the output of gluster volume info:
[root@ovirt1 ~]# gluster volume info
Volume Name: data
Type: Replicate
Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59
Status: Started
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick2/data
Brick2: ovirt2.nwfiber.com:/gluster/brick2/data
Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter)
Options Reconfigured:
performance.strict-o-direct: on
nfs.disable: on
user.cifs: off
network.ping-timeout: 30
cluster.shd-max-threads: 6
cluster.shd-wait-qlength: 10000
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
performance.low-prio-threads: 32
features.shard-block-size: 512MB
features.shard: on
storage.owner-gid: 36
storage.owner-uid: 36
cluster.server-quorum-type: server
cluster.quorum-type: auto
network.remote-dio: enable
cluster.eager-lock: enable
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
performance.readdir-ahead: on
server.allow-insecure: on
Volume Name: engine
Type: Replicate
Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de
Status: Started
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine
Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine
Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter)
Options Reconfigured:
performance.readdir-ahead: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: off
cluster.quorum-type: auto
cluster.server-quorum-type: server
storage.owner-uid: 36
storage.owner-gid: 36
features.shard: on
features.shard-block-size: 512MB
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 6
network.ping-timeout: 30
user.cifs: off
nfs.disable: on
performance.strict-o-direct: on
Volume Name: export
Type: Replicate
Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4
Status: Stopped
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick3/export
Brick2: ovirt2.nwfiber.com:/gluster/brick3/export
Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter)
Options Reconfigured:
performance.readdir-ahead: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: off
cluster.quorum-type: auto
cluster.server-quorum-type: server
storage.owner-uid: 36
storage.owner-gid: 36
features.shard: on
features.shard-block-size: 512MB
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 6
network.ping-timeout: 30
user.cifs: off
nfs.disable: on
performance.strict-o-direct: on
Volume Name: iso
Type: Replicate
Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92
Status: Started
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso
Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso
Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter)
Options Reconfigured:
performance.readdir-ahead: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: off
cluster.quorum-type: auto
cluster.server-quorum-type: server
storage.owner-uid: 36
storage.owner-gid: 36
features.shard: on
features.shard-block-size: 512MB
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 6
network.ping-timeout: 30
user.cifs: off
nfs.disable: on
performance.strict-o-direct: on
The node marked as (arbiter) on all of the bricks is the node that is not
using any of its disk space.
The engine domain is the volume dedicated for storing the hosted engine.
Here's some LVM info:
--- Logical volume ---
LV Path /dev/gluster/engine
LV Name engine
VG Name gluster
LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800
LV Status available
# open 1
LV Size 25.00 GiB
Current LE 6400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:2
--- Logical volume ---
LV Name lvthinpool
VG Name gluster
LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800
LV Pool metadata lvthinpool_tmeta
LV Pool data lvthinpool_tdata
LV Status available
# open 4
LV Size 150.00 GiB
Allocated pool data 65.02%
Allocated metadata 14.92%
Current LE 38400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:5
--- Logical volume ---
LV Path /dev/gluster/data
LV Name data
VG Name gluster
LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800
LV Pool name lvthinpool
LV Status available
# open 1
LV Size 100.00 GiB
Mapped size 90.28%
Current LE 25600
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:7
--- Logical volume ---
LV Path /dev/gluster/export
LV Name export
VG Name gluster
LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800
LV Pool name lvthinpool
LV Status available
# open 1
LV Size 25.00 GiB
Mapped size 0.12%
Current LE 6400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:8
--- Logical volume ---
LV Path /dev/gluster/iso
LV Name iso
VG Name gluster
LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800
LV Pool name lvthinpool
LV Status available
# open 1
LV Size 25.00 GiB
Mapped size 28.86%
Current LE 6400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:9
--- Logical volume ---
LV Path /dev/centos_ovirt/swap
LV Name swap
VG Name centos_ovirt
LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ
LV Write Access read/write
LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
LV Status available
# open 2
LV Size 16.00 GiB
Current LE 4096
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1
--- Logical volume ---
LV Path /dev/centos_ovirt/root
LV Name root
VG Name centos_ovirt
LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly
LV Write Access read/write
LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
LV Status available
# open 1
LV Size 20.00 GiB
Current LE 5120
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0
------------
I don't use the export gluster volume, and I've never used lvthinpool-type
allocations before, so I'm not sure if there's anything special there.
I followed the setup instructions from an ovirt contributed documentation
that I can't find now that talked about how to install ovirt with gluster
on a 3-node cluster.
Thank you for your assistance!
--Jim
On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose(a)redhat.com> wrote:
>
>
> On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot(a)redhat.com> wrote:
>
>> Hi Jim, please see inline
>>
>> On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim(a)palousetech.com>
>> wrote:
>>
>>> hello:
>>>
>>> I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a
>>> while now, and am now revisiting some aspects of it for ensuring that I
>>> have good reliability.
>>>
>>> My cluster is a 3 node cluster, with gluster nodes running on each
>>> node. After running my cluster a bit, I'm realizing I didn't do a
very
>>> optimal job of allocating the space on my disk to the different gluster
>>> mount points. Fortunately, they were created with LVM, so I'm hoping
that
>>> I can resize them without much trouble.
>>>
>>> I have a domain for iso, domain for export, and domain for storage, all
>>> thin provisioned; then a domain for the engine, not thin provisioned.
I'd
>>> like to expand the storage domain, and possibly shrink the engine domain
>>> and make that space also available to the main storage domain. Is it as
>>> simple as expanding the LVM partition, or are there more steps involved?
>>> Do I need to take the node offline?
>>>
>>
>> I didn't understand completely that part - what is the difference
>> between the domain for storage and the domain for engine you mentioned?
>>
>
> I think the domain for engine is the one storing Hosted Engine data.
> You should be able to expand your underlying LVM partition without having
> to take the node offline
>
>
>>
>>> second, I've noticed that the first two nodes seem to have a full copy
>>> of the data (the disks are in use), but the 3rd node appears to not be
>>> using any of its storage space...It is participating in the gluster
>>> cluster, though.
>>>
>>
> Is the volume created as replica 3? If so, fully copy of the data should
> be present on all 3 nodes. Please provide the output of "gluster volume
> info"
>
>
>>> Third, currently gluster shares the same network as the VM networks.
>>> I'd like to put it on its own network. I'm not sure how to do this,
as
>>> when I tried to do it at install time, I never got the cluster to come
>>> online; I had to make them share the same network to make that work.
>>>
>>
> While creating the bricks the network intended for gluster should have
> been used to identify the brick in hostname:brick-directory. Changing this
> at a later point is a bit more involved. Please check online or on
> gluster-users on changing IP address associated with brick.
>
>
>>
>> I'm adding Sahina who may shed some light on the gluster question, I'd
>> try on the gluster mailing list as well.
>>
>>>
>>>
>>> Ovirt questions:
>>> I've noticed that recently, I don't appear to be getting software
>>> updates anymore. I used to get update available notifications on my nodes
>>> every few days; I haven't seen one for a couple weeks now. is something
>>> wrong?
>>>
>>> I have a windows 10 x64 VM. I get a warning that my VM type does not
>>> match the installed OS. All works fine, but I've quadrouple-checked
that
>>> it does match. Is this a known bug?
>>>
>>
>> Arik, any info on that?
>>
>>>
>>> I have a UPS that all three nodes and the networking are on. It is a
>>> USB UPS. How should I best integrate monitoring in? I could put a
>>> raspberry pi up and then run NUT or similar on it, but is there a
"better"
>>> way with oVirt?
>>>
>>> Thanks!
>>> --Jim
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>
12:34 a.m.
On Sat, Apr 1, 2017 at 10:32 PM, Jim Kusznir <jim(a)palousetech.com> wrote:
Thank you!
Here's the output of gluster volume info:
[root@ovirt1 ~]# gluster volume info
Volume Name: data
Type: Replicate
Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59
Status: Started
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick2/data
Brick2: ovirt2.nwfiber.com:/gluster/brick2/data
Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter)
Options Reconfigured:
performance.strict-o-direct: on
nfs.disable: on
user.cifs: off
network.ping-timeout: 30
cluster.shd-max-threads: 6
cluster.shd-wait-qlength: 10000
cluster.locking-scheme: granular
cluster.data-self-heal-algorithm: full
performance.low-prio-threads: 32
features.shard-block-size: 512MB
features.shard: on
storage.owner-gid: 36
storage.owner-uid: 36
cluster.server-quorum-type: server
cluster.quorum-type: auto
network.remote-dio: enable
cluster.eager-lock: enable
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
performance.readdir-ahead: on
server.allow-insecure: on
Volume Name: engine
Type: Replicate
Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de
Status: Started
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine
Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine
Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter)
Options Reconfigured:
performance.readdir-ahead: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: off
cluster.quorum-type: auto
cluster.server-quorum-type: server
storage.owner-uid: 36
storage.owner-gid: 36
features.shard: on
features.shard-block-size: 512MB
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 6
network.ping-timeout: 30
user.cifs: off
nfs.disable: on
performance.strict-o-direct: on
Volume Name: export
Type: Replicate
Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4
Status: Stopped
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick3/export
Brick2: ovirt2.nwfiber.com:/gluster/brick3/export
Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter)
Options Reconfigured:
performance.readdir-ahead: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: off
cluster.quorum-type: auto
cluster.server-quorum-type: server
storage.owner-uid: 36
storage.owner-gid: 36
features.shard: on
features.shard-block-size: 512MB
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 6
network.ping-timeout: 30
user.cifs: off
nfs.disable: on
performance.strict-o-direct: on
Volume Name: iso
Type: Replicate
Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92
Status: Started
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso
Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso
Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter)
Options Reconfigured:
performance.readdir-ahead: on
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: off
cluster.quorum-type: auto
cluster.server-quorum-type: server
storage.owner-uid: 36
storage.owner-gid: 36
features.shard: on
features.shard-block-size: 512MB
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 6
network.ping-timeout: 30
user.cifs: off
nfs.disable: on
performance.strict-o-direct: on
The node marked as (arbiter) on all of the bricks is the node that is not
using any of its disk space.
This is by design - the arbiter brick only stores metadata and hence saves
on storage.
The engine domain is the volume dedicated for storing the hosted engine.
Here's some LVM info:
--- Logical volume ---
LV Path /dev/gluster/engine
LV Name engine
VG Name gluster
LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800
LV Status available
# open 1
LV Size 25.00 GiB
Current LE 6400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:2
--- Logical volume ---
LV Name lvthinpool
VG Name gluster
LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800
LV Pool metadata lvthinpool_tmeta
LV Pool data lvthinpool_tdata
LV Status available
# open 4
LV Size 150.00 GiB
Allocated pool data 65.02%
Allocated metadata 14.92%
Current LE 38400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:5
--- Logical volume ---
LV Path /dev/gluster/data
LV Name data
VG Name gluster
LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800
LV Pool name lvthinpool
LV Status available
# open 1
LV Size 100.00 GiB
Mapped size 90.28%
Current LE 25600
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:7
--- Logical volume ---
LV Path /dev/gluster/export
LV Name export
VG Name gluster
LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800
LV Pool name lvthinpool
LV Status available
# open 1
LV Size 25.00 GiB
Mapped size 0.12%
Current LE 6400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:8
--- Logical volume ---
LV Path /dev/gluster/iso
LV Name iso
VG Name gluster
LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX
LV Write Access read/write
LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800
LV Pool name lvthinpool
LV Status available
# open 1
LV Size 25.00 GiB
Mapped size 28.86%
Current LE 6400
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:9
--- Logical volume ---
LV Path /dev/centos_ovirt/swap
LV Name swap
VG Name centos_ovirt
LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ
LV Write Access read/write
LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
LV Status available
# open 2
LV Size 16.00 GiB
Current LE 4096
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1
--- Logical volume ---
LV Path /dev/centos_ovirt/root
LV Name root
VG Name centos_ovirt
LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly
LV Write Access read/write
LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
LV Status available
# open 1
LV Size 20.00 GiB
Current LE 5120
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0
------------
I don't use the export gluster volume, and I've never used lvthinpool-type
allocations before, so I'm not sure if there's anything special there.
I followed the setup instructions from an ovirt contributed documentation
that I can't find now that talked about how to install ovirt with gluster
on a 3-node cluster.
Thank you for your assistance!
--Jim
On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose(a)redhat.com> wrote:
>
>
> On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot(a)redhat.com> wrote:
>
>> Hi Jim, please see inline
>>
>> On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim(a)palousetech.com>
>> wrote:
>>
>>> hello:
>>>
>>> I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for a
>>> while now, and am now revisiting some aspects of it for ensuring that I
>>> have good reliability.
>>>
>>> My cluster is a 3 node cluster, with gluster nodes running on each
>>> node. After running my cluster a bit, I'm realizing I didn't do a
very
>>> optimal job of allocating the space on my disk to the different gluster
>>> mount points. Fortunately, they were created with LVM, so I'm hoping
that
>>> I can resize them without much trouble.
>>>
>>> I have a domain for iso, domain for export, and domain for storage, all
>>> thin provisioned; then a domain for the engine, not thin provisioned.
I'd
>>> like to expand the storage domain, and possibly shrink the engine domain
>>> and make that space also available to the main storage domain. Is it as
>>> simple as expanding the LVM partition, or are there more steps involved?
>>> Do I need to take the node offline?
>>>
>>
>> I didn't understand completely that part - what is the difference
>> between the domain for storage and the domain for engine you mentioned?
>>
>
> I think the domain for engine is the one storing Hosted Engine data.
> You should be able to expand your underlying LVM partition without having
> to take the node offline
>
>
>>
>>> second, I've noticed that the first two nodes seem to have a full copy
>>> of the data (the disks are in use), but the 3rd node appears to not be
>>> using any of its storage space...It is participating in the gluster
>>> cluster, though.
>>>
>>
> Is the volume created as replica 3? If so, fully copy of the data should
> be present on all 3 nodes. Please provide the output of "gluster volume
> info"
>
>
>>> Third, currently gluster shares the same network as the VM networks.
>>> I'd like to put it on its own network. I'm not sure how to do this,
as
>>> when I tried to do it at install time, I never got the cluster to come
>>> online; I had to make them share the same network to make that work.
>>>
>>
> While creating the bricks the network intended for gluster should have
> been used to identify the brick in hostname:brick-directory. Changing this
> at a later point is a bit more involved. Please check online or on
> gluster-users on changing IP address associated with brick.
>
>
>>
>> I'm adding Sahina who may shed some light on the gluster question, I'd
>> try on the gluster mailing list as well.
>>
>>>
>>>
>>> Ovirt questions:
>>> I've noticed that recently, I don't appear to be getting software
>>> updates anymore. I used to get update available notifications on my nodes
>>> every few days; I haven't seen one for a couple weeks now. is something
>>> wrong?
>>>
>>> I have a windows 10 x64 VM. I get a warning that my VM type does not
>>> match the installed OS. All works fine, but I've quadrouple-checked
that
>>> it does match. Is this a known bug?
>>>
>>
>> Arik, any info on that?
>>
>>>
>>> I have a UPS that all three nodes and the networking are on. It is a
>>> USB UPS. How should I best integrate monitoring in? I could put a
>>> raspberry pi up and then run NUT or similar on it, but is there a
"better"
>>> way with oVirt?
>>>
>>> Thanks!
>>> --Jim
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>
10:48 a.m.
So with arbiter, I actually only have two copies of data...Does arbiter
have at least checksum or something to detect corruption of a copy? (like
old RAID-4 disk configuration)?
Ok...Related question: Is there a way to set up an offsite gluster storage
server to mirror the contents of my main server? As "fire" insurance
basically? (eventually, I'd like to have an "offsite" DR cluster, but I
don't have the resources or scale yet for that).
What I'd like to do is place a basic storage server somewhere else and have
it sync any gluster data changes on a regular basis, and be usable to
repopulate storage should I loose all of my current cluster (eg, a building
fire or theft).
I find gluster has amazing power from what I hear, but I have a hard time
finding documentation at "the right level" to be useful. I've found some
very basic introductory guide, then some very advanced guides that require
extensive knowledge of gluster already. Something in the middle to explain
some of these questions (like arbitrar and migration strategies,
geo-replication, etc; and how to deploy them) are absent (or at least, i
haven't found them yet). I still feel like I'm using something I don't
understand, and the only avenue I have to learn more is to ask questions
here, as the docs aren't at an accessible level.
Thanks!
--Jim
On Mon, Apr 3, 2017 at 10:34 PM, Sahina Bose <sabose(a)redhat.com> wrote:
On Sat, Apr 1, 2017 at 10:32 PM, Jim Kusznir <jim(a)palousetech.com> wrote:
> Thank you!
>
> Here's the output of gluster volume info:
> [root@ovirt1 ~]# gluster volume info
>
> Volume Name: data
> Type: Replicate
> Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59
> Status: Started
> Number of Bricks: 1 x (2 + 1) = 3
> Transport-type: tcp
> Bricks:
> Brick1: ovirt1.nwfiber.com:/gluster/brick2/data
> Brick2: ovirt2.nwfiber.com:/gluster/brick2/data
> Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter)
> Options Reconfigured:
> performance.strict-o-direct: on
> nfs.disable: on
> user.cifs: off
> network.ping-timeout: 30
> cluster.shd-max-threads: 6
> cluster.shd-wait-qlength: 10000
> cluster.locking-scheme: granular
> cluster.data-self-heal-algorithm: full
> performance.low-prio-threads: 32
> features.shard-block-size: 512MB
> features.shard: on
> storage.owner-gid: 36
> storage.owner-uid: 36
> cluster.server-quorum-type: server
> cluster.quorum-type: auto
> network.remote-dio: enable
> cluster.eager-lock: enable
> performance.stat-prefetch: off
> performance.io-cache: off
> performance.read-ahead: off
> performance.quick-read: off
> performance.readdir-ahead: on
> server.allow-insecure: on
>
> Volume Name: engine
> Type: Replicate
> Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de
> Status: Started
> Number of Bricks: 1 x (2 + 1) = 3
> Transport-type: tcp
> Bricks:
> Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine
> Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine
> Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter)
> Options Reconfigured:
> performance.readdir-ahead: on
> performance.quick-read: off
> performance.read-ahead: off
> performance.io-cache: off
> performance.stat-prefetch: off
> cluster.eager-lock: enable
> network.remote-dio: off
> cluster.quorum-type: auto
> cluster.server-quorum-type: server
> storage.owner-uid: 36
> storage.owner-gid: 36
> features.shard: on
> features.shard-block-size: 512MB
> performance.low-prio-threads: 32
> cluster.data-self-heal-algorithm: full
> cluster.locking-scheme: granular
> cluster.shd-wait-qlength: 10000
> cluster.shd-max-threads: 6
> network.ping-timeout: 30
> user.cifs: off
> nfs.disable: on
> performance.strict-o-direct: on
>
> Volume Name: export
> Type: Replicate
> Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4
> Status: Stopped
> Number of Bricks: 1 x (2 + 1) = 3
> Transport-type: tcp
> Bricks:
> Brick1: ovirt1.nwfiber.com:/gluster/brick3/export
> Brick2: ovirt2.nwfiber.com:/gluster/brick3/export
> Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter)
> Options Reconfigured:
> performance.readdir-ahead: on
> performance.quick-read: off
> performance.read-ahead: off
> performance.io-cache: off
> performance.stat-prefetch: off
> cluster.eager-lock: enable
> network.remote-dio: off
> cluster.quorum-type: auto
> cluster.server-quorum-type: server
> storage.owner-uid: 36
> storage.owner-gid: 36
> features.shard: on
> features.shard-block-size: 512MB
> performance.low-prio-threads: 32
> cluster.data-self-heal-algorithm: full
> cluster.locking-scheme: granular
> cluster.shd-wait-qlength: 10000
> cluster.shd-max-threads: 6
> network.ping-timeout: 30
> user.cifs: off
> nfs.disable: on
> performance.strict-o-direct: on
>
> Volume Name: iso
> Type: Replicate
> Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92
> Status: Started
> Number of Bricks: 1 x (2 + 1) = 3
> Transport-type: tcp
> Bricks:
> Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso
> Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso
> Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter)
> Options Reconfigured:
> performance.readdir-ahead: on
> performance.quick-read: off
> performance.read-ahead: off
> performance.io-cache: off
> performance.stat-prefetch: off
> cluster.eager-lock: enable
> network.remote-dio: off
> cluster.quorum-type: auto
> cluster.server-quorum-type: server
> storage.owner-uid: 36
> storage.owner-gid: 36
> features.shard: on
> features.shard-block-size: 512MB
> performance.low-prio-threads: 32
> cluster.data-self-heal-algorithm: full
> cluster.locking-scheme: granular
> cluster.shd-wait-qlength: 10000
> cluster.shd-max-threads: 6
> network.ping-timeout: 30
> user.cifs: off
> nfs.disable: on
> performance.strict-o-direct: on
>
>
> The node marked as (arbiter) on all of the bricks is the node that is not
> using any of its disk space.
>
This is by design - the arbiter brick only stores metadata and hence saves
on storage.
>
> The engine domain is the volume dedicated for storing the hosted engine.
> Here's some LVM info:
>
> --- Logical volume ---
> LV Path /dev/gluster/engine
> LV Name engine
> VG Name gluster
> LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg
> LV Write Access read/write
> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800
> LV Status available
> # open 1
> LV Size 25.00 GiB
> Current LE 6400
> Segments 1
> Allocation inherit
> Read ahead sectors auto
> - currently set to 256
> Block device 253:2
>
> --- Logical volume ---
> LV Name lvthinpool
> VG Name gluster
> LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid
> LV Write Access read/write
> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800
> LV Pool metadata lvthinpool_tmeta
> LV Pool data lvthinpool_tdata
> LV Status available
> # open 4
> LV Size 150.00 GiB
> Allocated pool data 65.02%
> Allocated metadata 14.92%
> Current LE 38400
> Segments 1
> Allocation inherit
> Read ahead sectors auto
> - currently set to 256
> Block device 253:5
>
> --- Logical volume ---
> LV Path /dev/gluster/data
> LV Name data
> VG Name gluster
> LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn
> LV Write Access read/write
> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800
> LV Pool name lvthinpool
> LV Status available
> # open 1
> LV Size 100.00 GiB
> Mapped size 90.28%
> Current LE 25600
> Segments 1
> Allocation inherit
> Read ahead sectors auto
> - currently set to 256
> Block device 253:7
>
> --- Logical volume ---
> LV Path /dev/gluster/export
> LV Name export
> VG Name gluster
> LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8
> LV Write Access read/write
> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800
> LV Pool name lvthinpool
> LV Status available
> # open 1
> LV Size 25.00 GiB
> Mapped size 0.12%
> Current LE 6400
> Segments 1
> Allocation inherit
> Read ahead sectors auto
> - currently set to 256
> Block device 253:8
>
> --- Logical volume ---
> LV Path /dev/gluster/iso
> LV Name iso
> VG Name gluster
> LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX
> LV Write Access read/write
> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800
> LV Pool name lvthinpool
> LV Status available
> # open 1
> LV Size 25.00 GiB
> Mapped size 28.86%
> Current LE 6400
> Segments 1
> Allocation inherit
> Read ahead sectors auto
> - currently set to 256
> Block device 253:9
>
> --- Logical volume ---
> LV Path /dev/centos_ovirt/swap
> LV Name swap
> VG Name centos_ovirt
> LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ
> LV Write Access read/write
> LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
> LV Status available
> # open 2
> LV Size 16.00 GiB
> Current LE 4096
> Segments 1
> Allocation inherit
> Read ahead sectors auto
> - currently set to 256
> Block device 253:1
>
> --- Logical volume ---
> LV Path /dev/centos_ovirt/root
> LV Name root
> VG Name centos_ovirt
> LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly
> LV Write Access read/write
> LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
> LV Status available
> # open 1
> LV Size 20.00 GiB
> Current LE 5120
> Segments 1
> Allocation inherit
> Read ahead sectors auto
> - currently set to 256
> Block device 253:0
>
> ------------
>
> I don't use the export gluster volume, and I've never used
> lvthinpool-type allocations before, so I'm not sure if there's anything
> special there.
>
> I followed the setup instructions from an ovirt contributed documentation
> that I can't find now that talked about how to install ovirt with gluster
> on a 3-node cluster.
>
> Thank you for your assistance!
> --Jim
>
> On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose(a)redhat.com> wrote:
>
>>
>>
>> On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot(a)redhat.com>
>> wrote:
>>
>>> Hi Jim, please see inline
>>>
>>> On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim(a)palousetech.com>
>>> wrote:
>>>
>>>> hello:
>>>>
>>>> I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster for
a
>>>> while now, and am now revisiting some aspects of it for ensuring that I
>>>> have good reliability.
>>>>
>>>> My cluster is a 3 node cluster, with gluster nodes running on each
>>>> node. After running my cluster a bit, I'm realizing I didn't do
a very
>>>> optimal job of allocating the space on my disk to the different gluster
>>>> mount points. Fortunately, they were created with LVM, so I'm hoping
that
>>>> I can resize them without much trouble.
>>>>
>>>> I have a domain for iso, domain for export, and domain for storage,
>>>> all thin provisioned; then a domain for the engine, not thin
provisioned.
>>>> I'd like to expand the storage domain, and possibly shrink the
engine
>>>> domain and make that space also available to the main storage domain.
Is
>>>> it as simple as expanding the LVM partition, or are there more steps
>>>> involved? Do I need to take the node offline?
>>>>
>>>
>>> I didn't understand completely that part - what is the difference
>>> between the domain for storage and the domain for engine you mentioned?
>>>
>>
>> I think the domain for engine is the one storing Hosted Engine data.
>> You should be able to expand your underlying LVM partition without
>> having to take the node offline
>>
>>
>>>
>>>> second, I've noticed that the first two nodes seem to have a full
copy
>>>> of the data (the disks are in use), but the 3rd node appears to not be
>>>> using any of its storage space...It is participating in the gluster
>>>> cluster, though.
>>>>
>>>
>> Is the volume created as replica 3? If so, fully copy of the data should
>> be present on all 3 nodes. Please provide the output of "gluster volume
>> info"
>>
>>
>>>> Third, currently gluster shares the same network as the VM networks.
>>>> I'd like to put it on its own network. I'm not sure how to do
this, as
>>>> when I tried to do it at install time, I never got the cluster to come
>>>> online; I had to make them share the same network to make that work.
>>>>
>>>
>> While creating the bricks the network intended for gluster should have
>> been used to identify the brick in hostname:brick-directory. Changing this
>> at a later point is a bit more involved. Please check online or on
>> gluster-users on changing IP address associated with brick.
>>
>>
>>>
>>> I'm adding Sahina who may shed some light on the gluster question,
I'd
>>> try on the gluster mailing list as well.
>>>
>>>>
>>>>
>>>> Ovirt questions:
>>>> I've noticed that recently, I don't appear to be getting
software
>>>> updates anymore. I used to get update available notifications on my
nodes
>>>> every few days; I haven't seen one for a couple weeks now. is
something
>>>> wrong?
>>>>
>>>> I have a windows 10 x64 VM. I get a warning that my VM type does not
>>>> match the installed OS. All works fine, but I've quadrouple-checked
that
>>>> it does match. Is this a known bug?
>>>>
>>>
>>> Arik, any info on that?
>>>
>>>>
>>>> I have a UPS that all three nodes and the networking are on. It is a
>>>> USB UPS. How should I best integrate monitoring in? I could put a
>>>> raspberry pi up and then run NUT or similar on it, but is there a
"better"
>>>> way with oVirt?
>>>>
>>>> Thanks!
>>>> --Jim
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>>
>>>
>>
>
12:02 p.m.
On Tue, Apr 25, 2017 at 9:18 PM, Jim Kusznir <jim(a)palousetech.com> wrote:
So with arbiter, I actually only have two copies of data...Does
arbiter
have at least checksum or something to detect corruption of a copy? (like
old RAID-4 disk configuration)?
Yes, the arbiter brick stores metadata information about the files to
decide the good copy of data stored on the replicas in case of conflict.
Ok...Related question: Is there a way to set up an offsite gluster
storage server to mirror the contents of my main server? As "fire"
insurance basically? (eventually, I'd like to have an "offsite" DR
cluster, but I don't have the resources or scale yet for that).
What I'd like to do is place a basic storage server somewhere else and
have it sync any gluster data changes on a regular basis, and be usable to
repopulate storage should I loose all of my current cluster (eg, a building
fire or theft).
Yes, the geo-replication feature can help with that. There's a remote data
sync feature introduced for gluster storage domains, that helps with this.
You can set this up such that data from your storage domain is regularly
synced to a remote gluster volume, while ensuring data consistency. The
remote gluster volume does not have to a replica 3.
I find gluster has amazing power from what I hear, but I have a hard time
finding documentation at "the right level" to be useful. I've found some
very basic introductory guide, then some very advanced guides that require
extensive knowledge of gluster already. Something in the middle to explain
some of these questions (like arbitrar and migration strategies,
geo-replication, etc; and how to deploy them) are absent (or at least, i
haven't found them yet). I still feel like I'm using something I don't
understand, and the only avenue I have to learn more is to ask questions
here, as the docs aren't at an accessible level.
Thanks for the feedback. Are you looking at documentation on a use-case
basis?
Thanks!
--Jim
On Mon, Apr 3, 2017 at 10:34 PM, Sahina Bose <sabose(a)redhat.com> wrote:
>
>
> On Sat, Apr 1, 2017 at 10:32 PM, Jim Kusznir <jim(a)palousetech.com> wrote:
>
>> Thank you!
>>
>> Here's the output of gluster volume info:
>> [root@ovirt1 ~]# gluster volume info
>>
>> Volume Name: data
>> Type: Replicate
>> Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59
>> Status: Started
>> Number of Bricks: 1 x (2 + 1) = 3
>> Transport-type: tcp
>> Bricks:
>> Brick1: ovirt1.nwfiber.com:/gluster/brick2/data
>> Brick2: ovirt2.nwfiber.com:/gluster/brick2/data
>> Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter)
>> Options Reconfigured:
>> performance.strict-o-direct: on
>> nfs.disable: on
>> user.cifs: off
>> network.ping-timeout: 30
>> cluster.shd-max-threads: 6
>> cluster.shd-wait-qlength: 10000
>> cluster.locking-scheme: granular
>> cluster.data-self-heal-algorithm: full
>> performance.low-prio-threads: 32
>> features.shard-block-size: 512MB
>> features.shard: on
>> storage.owner-gid: 36
>> storage.owner-uid: 36
>> cluster.server-quorum-type: server
>> cluster.quorum-type: auto
>> network.remote-dio: enable
>> cluster.eager-lock: enable
>> performance.stat-prefetch: off
>> performance.io-cache: off
>> performance.read-ahead: off
>> performance.quick-read: off
>> performance.readdir-ahead: on
>> server.allow-insecure: on
>>
>> Volume Name: engine
>> Type: Replicate
>> Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de
>> Status: Started
>> Number of Bricks: 1 x (2 + 1) = 3
>> Transport-type: tcp
>> Bricks:
>> Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine
>> Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine
>> Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter)
>> Options Reconfigured:
>> performance.readdir-ahead: on
>> performance.quick-read: off
>> performance.read-ahead: off
>> performance.io-cache: off
>> performance.stat-prefetch: off
>> cluster.eager-lock: enable
>> network.remote-dio: off
>> cluster.quorum-type: auto
>> cluster.server-quorum-type: server
>> storage.owner-uid: 36
>> storage.owner-gid: 36
>> features.shard: on
>> features.shard-block-size: 512MB
>> performance.low-prio-threads: 32
>> cluster.data-self-heal-algorithm: full
>> cluster.locking-scheme: granular
>> cluster.shd-wait-qlength: 10000
>> cluster.shd-max-threads: 6
>> network.ping-timeout: 30
>> user.cifs: off
>> nfs.disable: on
>> performance.strict-o-direct: on
>>
>> Volume Name: export
>> Type: Replicate
>> Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4
>> Status: Stopped
>> Number of Bricks: 1 x (2 + 1) = 3
>> Transport-type: tcp
>> Bricks:
>> Brick1: ovirt1.nwfiber.com:/gluster/brick3/export
>> Brick2: ovirt2.nwfiber.com:/gluster/brick3/export
>> Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter)
>> Options Reconfigured:
>> performance.readdir-ahead: on
>> performance.quick-read: off
>> performance.read-ahead: off
>> performance.io-cache: off
>> performance.stat-prefetch: off
>> cluster.eager-lock: enable
>> network.remote-dio: off
>> cluster.quorum-type: auto
>> cluster.server-quorum-type: server
>> storage.owner-uid: 36
>> storage.owner-gid: 36
>> features.shard: on
>> features.shard-block-size: 512MB
>> performance.low-prio-threads: 32
>> cluster.data-self-heal-algorithm: full
>> cluster.locking-scheme: granular
>> cluster.shd-wait-qlength: 10000
>> cluster.shd-max-threads: 6
>> network.ping-timeout: 30
>> user.cifs: off
>> nfs.disable: on
>> performance.strict-o-direct: on
>>
>> Volume Name: iso
>> Type: Replicate
>> Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92
>> Status: Started
>> Number of Bricks: 1 x (2 + 1) = 3
>> Transport-type: tcp
>> Bricks:
>> Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso
>> Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso
>> Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter)
>> Options Reconfigured:
>> performance.readdir-ahead: on
>> performance.quick-read: off
>> performance.read-ahead: off
>> performance.io-cache: off
>> performance.stat-prefetch: off
>> cluster.eager-lock: enable
>> network.remote-dio: off
>> cluster.quorum-type: auto
>> cluster.server-quorum-type: server
>> storage.owner-uid: 36
>> storage.owner-gid: 36
>> features.shard: on
>> features.shard-block-size: 512MB
>> performance.low-prio-threads: 32
>> cluster.data-self-heal-algorithm: full
>> cluster.locking-scheme: granular
>> cluster.shd-wait-qlength: 10000
>> cluster.shd-max-threads: 6
>> network.ping-timeout: 30
>> user.cifs: off
>> nfs.disable: on
>> performance.strict-o-direct: on
>>
>>
>> The node marked as (arbiter) on all of the bricks is the node that is
>> not using any of its disk space.
>>
>
> This is by design - the arbiter brick only stores metadata and hence
> saves on storage.
>
>
>>
>> The engine domain is the volume dedicated for storing the hosted
>> engine. Here's some LVM info:
>>
>> --- Logical volume ---
>> LV Path /dev/gluster/engine
>> LV Name engine
>> VG Name gluster
>> LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg
>> LV Write Access read/write
>> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800
>> LV Status available
>> # open 1
>> LV Size 25.00 GiB
>> Current LE 6400
>> Segments 1
>> Allocation inherit
>> Read ahead sectors auto
>> - currently set to 256
>> Block device 253:2
>>
>> --- Logical volume ---
>> LV Name lvthinpool
>> VG Name gluster
>> LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid
>> LV Write Access read/write
>> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800
>> LV Pool metadata lvthinpool_tmeta
>> LV Pool data lvthinpool_tdata
>> LV Status available
>> # open 4
>> LV Size 150.00 GiB
>> Allocated pool data 65.02%
>> Allocated metadata 14.92%
>> Current LE 38400
>> Segments 1
>> Allocation inherit
>> Read ahead sectors auto
>> - currently set to 256
>> Block device 253:5
>>
>> --- Logical volume ---
>> LV Path /dev/gluster/data
>> LV Name data
>> VG Name gluster
>> LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn
>> LV Write Access read/write
>> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800
>> LV Pool name lvthinpool
>> LV Status available
>> # open 1
>> LV Size 100.00 GiB
>> Mapped size 90.28%
>> Current LE 25600
>> Segments 1
>> Allocation inherit
>> Read ahead sectors auto
>> - currently set to 256
>> Block device 253:7
>>
>> --- Logical volume ---
>> LV Path /dev/gluster/export
>> LV Name export
>> VG Name gluster
>> LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8
>> LV Write Access read/write
>> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800
>> LV Pool name lvthinpool
>> LV Status available
>> # open 1
>> LV Size 25.00 GiB
>> Mapped size 0.12%
>> Current LE 6400
>> Segments 1
>> Allocation inherit
>> Read ahead sectors auto
>> - currently set to 256
>> Block device 253:8
>>
>> --- Logical volume ---
>> LV Path /dev/gluster/iso
>> LV Name iso
>> VG Name gluster
>> LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX
>> LV Write Access read/write
>> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800
>> LV Pool name lvthinpool
>> LV Status available
>> # open 1
>> LV Size 25.00 GiB
>> Mapped size 28.86%
>> Current LE 6400
>> Segments 1
>> Allocation inherit
>> Read ahead sectors auto
>> - currently set to 256
>> Block device 253:9
>>
>> --- Logical volume ---
>> LV Path /dev/centos_ovirt/swap
>> LV Name swap
>> VG Name centos_ovirt
>> LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ
>> LV Write Access read/write
>> LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
>> LV Status available
>> # open 2
>> LV Size 16.00 GiB
>> Current LE 4096
>> Segments 1
>> Allocation inherit
>> Read ahead sectors auto
>> - currently set to 256
>> Block device 253:1
>>
>> --- Logical volume ---
>> LV Path /dev/centos_ovirt/root
>> LV Name root
>> VG Name centos_ovirt
>> LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly
>> LV Write Access read/write
>> LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
>> LV Status available
>> # open 1
>> LV Size 20.00 GiB
>> Current LE 5120
>> Segments 1
>> Allocation inherit
>> Read ahead sectors auto
>> - currently set to 256
>> Block device 253:0
>>
>> ------------
>>
>> I don't use the export gluster volume, and I've never used
>> lvthinpool-type allocations before, so I'm not sure if there's anything
>> special there.
>>
>> I followed the setup instructions from an ovirt contributed
>> documentation that I can't find now that talked about how to install ovirt
>> with gluster on a 3-node cluster.
>>
>> Thank you for your assistance!
>> --Jim
>>
>> On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose(a)redhat.com> wrote:
>>
>>>
>>>
>>> On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot(a)redhat.com>
>>> wrote:
>>>
>>>> Hi Jim, please see inline
>>>>
>>>> On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir <jim(a)palousetech.com>
>>>> wrote:
>>>>
>>>>> hello:
>>>>>
>>>>> I've been running my ovirt Version 4.0.5.5-1.el7.centos cluster
for a
>>>>> while now, and am now revisiting some aspects of it for ensuring that
I
>>>>> have good reliability.
>>>>>
>>>>> My cluster is a 3 node cluster, with gluster nodes running on each
>>>>> node. After running my cluster a bit, I'm realizing I didn't
do a very
>>>>> optimal job of allocating the space on my disk to the different
gluster
>>>>> mount points. Fortunately, they were created with LVM, so I'm
hoping that
>>>>> I can resize them without much trouble.
>>>>>
>>>>> I have a domain for iso, domain for export, and domain for storage,
>>>>> all thin provisioned; then a domain for the engine, not thin
provisioned.
>>>>> I'd like to expand the storage domain, and possibly shrink the
engine
>>>>> domain and make that space also available to the main storage domain.
Is
>>>>> it as simple as expanding the LVM partition, or are there more steps
>>>>> involved? Do I need to take the node offline?
>>>>>
>>>>
>>>> I didn't understand completely that part - what is the difference
>>>> between the domain for storage and the domain for engine you mentioned?
>>>>
>>>
>>> I think the domain for engine is the one storing Hosted Engine data.
>>> You should be able to expand your underlying LVM partition without
>>> having to take the node offline
>>>
>>>
>>>>
>>>>> second, I've noticed that the first two nodes seem to have a
full
>>>>> copy of the data (the disks are in use), but the 3rd node appears to
not be
>>>>> using any of its storage space...It is participating in the gluster
>>>>> cluster, though.
>>>>>
>>>>
>>> Is the volume created as replica 3? If so, fully copy of the data
>>> should be present on all 3 nodes. Please provide the output of "gluster
>>> volume info"
>>>
>>>
>>>>> Third, currently gluster shares the same network as the VM networks.
>>>>> I'd like to put it on its own network. I'm not sure how to
do this, as
>>>>> when I tried to do it at install time, I never got the cluster to
come
>>>>> online; I had to make them share the same network to make that work.
>>>>>
>>>>
>>> While creating the bricks the network intended for gluster should have
>>> been used to identify the brick in hostname:brick-directory. Changing this
>>> at a later point is a bit more involved. Please check online or on
>>> gluster-users on changing IP address associated with brick.
>>>
>>>
>>>>
>>>> I'm adding Sahina who may shed some light on the gluster question,
I'd
>>>> try on the gluster mailing list as well.
>>>>
>>>>>
>>>>>
>>>>> Ovirt questions:
>>>>> I've noticed that recently, I don't appear to be getting
software
>>>>> updates anymore. I used to get update available notifications on my
nodes
>>>>> every few days; I haven't seen one for a couple weeks now. is
something
>>>>> wrong?
>>>>>
>>>>> I have a windows 10 x64 VM. I get a warning that my VM type does
not
>>>>> match the installed OS. All works fine, but I've
quadrouple-checked that
>>>>> it does match. Is this a known bug?
>>>>>
>>>>
>>>> Arik, any info on that?
>>>>
>>>>>
>>>>> I have a UPS that all three nodes and the networking are on. It is
a
>>>>> USB UPS. How should I best integrate monitoring in? I could put a
>>>>> raspberry pi up and then run NUT or similar on it, but is there a
"better"
>>>>> way with oVirt?
>>>>>
>>>>> Thanks!
>>>>> --Jim
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users(a)ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>
>>
>
1:30 p.m.
Thank you for your response! With the right magic word "geo-replication",
I was able to find a howto that appears to be what I need to get started.
As to the documentation, some more use-case docs would be helpful. I also
find myself struggling to understand it at a level to feel comfortable
admining it. For example, I followed a howto to get my current gluster
stuff running, but just barely, and I still don't truely understand the
components or how to make them work. My system is 3 node ovirt cluster
with gluster bricks located on the same nodes (and node 3 is the arbitrar
apparently). I was trying to set up gluster to ride on its own network
instead of sharing the ovirt main network. Unfortunately, I never could
get that to work, and now that it is in production, I don't have the
slightest on where to look to cause gluster to use a different network
interface already configured and up on the servers. I'm not even sure I
know what tools to use at the command line level to ensure gluster is
healthy, and should something happen, I'd probably have to post panicked
e-mails here....
I also am not sure I understand gluster well enough to architect a system
under new assumptions. My current configuration was always intended to be
a "phase 1" to get my cluster online and thus start and grow my business.
However, my current storage is very limited. So, what should my target be
for a "better" cluster? Single server, or dual?
If I grow to the point where I have multiple clusters at different offices
(connected by fiber I own), how should I architect the storage then such
that VMs can be moved between clusters, and my clusters 'back each other
up"? I could use geo-replication, but is that the best/proper way? If I
build dedicated servers, do I need more than one gluster storage server per
location?
This is a lot I just threw out there...These questions have all passed
through my head, but I haven't found enough details to answer them myself.
I'm slowly growing in a few areas; this geo-replication configuration will
be my next growth. I would like to move my gluster to another network, and
I think I found some of the files where relevant configs are stored, but
not enough detail to feel comfortable without breaking what I have. I
realized that most systems I've set up, the docs are a bit less
"recipie"-ish and have more explanation interspersed with the commands, and
intermediate checks (with explanations) to check your work as you go.
These are extremely valuable to me.
For example, if my initial configuration instructions had a paragraph about
the network architecture, different settings (eg, gluster-gluster node sync
vs management interface that ovirt uses vs data access for clients), and
then walks through configuring each one, then showed the command line
instructions to check that was working correctly before moving on to the
next stage, that would help me understand what I've done, and be more
likely to maintain it. It also makes other docs more understandable given
a deeper knowledge of what I've already done.
Its possible that the instructions I used may have been poorer than typical
for the project, but my googling didn't turn up something that allowed me
to figure it out before I posted my original e-mail.
Thanks for your help!
--Jim
On Tue, Apr 25, 2017 at 10:02 AM, Sahina Bose <sabose(a)redhat.com> wrote:
On Tue, Apr 25, 2017 at 9:18 PM, Jim Kusznir <jim(a)palousetech.com> wrote:
> So with arbiter, I actually only have two copies of data...Does arbiter
> have at least checksum or something to detect corruption of a copy? (like
> old RAID-4 disk configuration)?
>
Yes, the arbiter brick stores metadata information about the files to
decide the good copy of data stored on the replicas in case of conflict.
>
> Ok...Related question: Is there a way to set up an offsite gluster
> storage server to mirror the contents of my main server? As "fire"
> insurance basically? (eventually, I'd like to have an "offsite" DR
> cluster, but I don't have the resources or scale yet for that).
>
> What I'd like to do is place a basic storage server somewhere else and
> have it sync any gluster data changes on a regular basis, and be usable to
> repopulate storage should I loose all of my current cluster (eg, a building
> fire or theft).
>
Yes, the geo-replication feature can help with that. There's a remote data
sync feature introduced for gluster storage domains, that helps with this.
You can set this up such that data from your storage domain is regularly
synced to a remote gluster volume, while ensuring data consistency. The
remote gluster volume does not have to a replica 3.
>
> I find gluster has amazing power from what I hear, but I have a hard time
> finding documentation at "the right level" to be useful. I've found
some
> very basic introductory guide, then some very advanced guides that require
> extensive knowledge of gluster already. Something in the middle to explain
> some of these questions (like arbitrar and migration strategies,
> geo-replication, etc; and how to deploy them) are absent (or at least, i
> haven't found them yet). I still feel like I'm using something I don't
> understand, and the only avenue I have to learn more is to ask questions
> here, as the docs aren't at an accessible level.
>
Thanks for the feedback. Are you looking at documentation on a use-case
basis?
>
> Thanks!
> --Jim
>
> On Mon, Apr 3, 2017 at 10:34 PM, Sahina Bose <sabose(a)redhat.com> wrote:
>
>>
>>
>> On Sat, Apr 1, 2017 at 10:32 PM, Jim Kusznir <jim(a)palousetech.com>
>> wrote:
>>
>>> Thank you!
>>>
>>> Here's the output of gluster volume info:
>>> [root@ovirt1 ~]# gluster volume info
>>>
>>> Volume Name: data
>>> Type: Replicate
>>> Volume ID: e670c488-ac16-4dd1-8bd3-e43b2e42cc59
>>> Status: Started
>>> Number of Bricks: 1 x (2 + 1) = 3
>>> Transport-type: tcp
>>> Bricks:
>>> Brick1: ovirt1.nwfiber.com:/gluster/brick2/data
>>> Brick2: ovirt2.nwfiber.com:/gluster/brick2/data
>>> Brick3: ovirt3.nwfiber.com:/gluster/brick2/data (arbiter)
>>> Options Reconfigured:
>>> performance.strict-o-direct: on
>>> nfs.disable: on
>>> user.cifs: off
>>> network.ping-timeout: 30
>>> cluster.shd-max-threads: 6
>>> cluster.shd-wait-qlength: 10000
>>> cluster.locking-scheme: granular
>>> cluster.data-self-heal-algorithm: full
>>> performance.low-prio-threads: 32
>>> features.shard-block-size: 512MB
>>> features.shard: on
>>> storage.owner-gid: 36
>>> storage.owner-uid: 36
>>> cluster.server-quorum-type: server
>>> cluster.quorum-type: auto
>>> network.remote-dio: enable
>>> cluster.eager-lock: enable
>>> performance.stat-prefetch: off
>>> performance.io-cache: off
>>> performance.read-ahead: off
>>> performance.quick-read: off
>>> performance.readdir-ahead: on
>>> server.allow-insecure: on
>>>
>>> Volume Name: engine
>>> Type: Replicate
>>> Volume ID: 87ad86b9-d88b-457e-ba21-5d3173c612de
>>> Status: Started
>>> Number of Bricks: 1 x (2 + 1) = 3
>>> Transport-type: tcp
>>> Bricks:
>>> Brick1: ovirt1.nwfiber.com:/gluster/brick1/engine
>>> Brick2: ovirt2.nwfiber.com:/gluster/brick1/engine
>>> Brick3: ovirt3.nwfiber.com:/gluster/brick1/engine (arbiter)
>>> Options Reconfigured:
>>> performance.readdir-ahead: on
>>> performance.quick-read: off
>>> performance.read-ahead: off
>>> performance.io-cache: off
>>> performance.stat-prefetch: off
>>> cluster.eager-lock: enable
>>> network.remote-dio: off
>>> cluster.quorum-type: auto
>>> cluster.server-quorum-type: server
>>> storage.owner-uid: 36
>>> storage.owner-gid: 36
>>> features.shard: on
>>> features.shard-block-size: 512MB
>>> performance.low-prio-threads: 32
>>> cluster.data-self-heal-algorithm: full
>>> cluster.locking-scheme: granular
>>> cluster.shd-wait-qlength: 10000
>>> cluster.shd-max-threads: 6
>>> network.ping-timeout: 30
>>> user.cifs: off
>>> nfs.disable: on
>>> performance.strict-o-direct: on
>>>
>>> Volume Name: export
>>> Type: Replicate
>>> Volume ID: 04ee58c7-2ba1-454f-be99-26ac75a352b4
>>> Status: Stopped
>>> Number of Bricks: 1 x (2 + 1) = 3
>>> Transport-type: tcp
>>> Bricks:
>>> Brick1: ovirt1.nwfiber.com:/gluster/brick3/export
>>> Brick2: ovirt2.nwfiber.com:/gluster/brick3/export
>>> Brick3: ovirt3.nwfiber.com:/gluster/brick3/export (arbiter)
>>> Options Reconfigured:
>>> performance.readdir-ahead: on
>>> performance.quick-read: off
>>> performance.read-ahead: off
>>> performance.io-cache: off
>>> performance.stat-prefetch: off
>>> cluster.eager-lock: enable
>>> network.remote-dio: off
>>> cluster.quorum-type: auto
>>> cluster.server-quorum-type: server
>>> storage.owner-uid: 36
>>> storage.owner-gid: 36
>>> features.shard: on
>>> features.shard-block-size: 512MB
>>> performance.low-prio-threads: 32
>>> cluster.data-self-heal-algorithm: full
>>> cluster.locking-scheme: granular
>>> cluster.shd-wait-qlength: 10000
>>> cluster.shd-max-threads: 6
>>> network.ping-timeout: 30
>>> user.cifs: off
>>> nfs.disable: on
>>> performance.strict-o-direct: on
>>>
>>> Volume Name: iso
>>> Type: Replicate
>>> Volume ID: b1ba15f5-0f0f-4411-89d0-595179f02b92
>>> Status: Started
>>> Number of Bricks: 1 x (2 + 1) = 3
>>> Transport-type: tcp
>>> Bricks:
>>> Brick1: ovirt1.nwfiber.com:/gluster/brick4/iso
>>> Brick2: ovirt2.nwfiber.com:/gluster/brick4/iso
>>> Brick3: ovirt3.nwfiber.com:/gluster/brick4/iso (arbiter)
>>> Options Reconfigured:
>>> performance.readdir-ahead: on
>>> performance.quick-read: off
>>> performance.read-ahead: off
>>> performance.io-cache: off
>>> performance.stat-prefetch: off
>>> cluster.eager-lock: enable
>>> network.remote-dio: off
>>> cluster.quorum-type: auto
>>> cluster.server-quorum-type: server
>>> storage.owner-uid: 36
>>> storage.owner-gid: 36
>>> features.shard: on
>>> features.shard-block-size: 512MB
>>> performance.low-prio-threads: 32
>>> cluster.data-self-heal-algorithm: full
>>> cluster.locking-scheme: granular
>>> cluster.shd-wait-qlength: 10000
>>> cluster.shd-max-threads: 6
>>> network.ping-timeout: 30
>>> user.cifs: off
>>> nfs.disable: on
>>> performance.strict-o-direct: on
>>>
>>>
>>> The node marked as (arbiter) on all of the bricks is the node that is
>>> not using any of its disk space.
>>>
>>
>> This is by design - the arbiter brick only stores metadata and hence
>> saves on storage.
>>
>>
>>>
>>> The engine domain is the volume dedicated for storing the hosted
>>> engine. Here's some LVM info:
>>>
>>> --- Logical volume ---
>>> LV Path /dev/gluster/engine
>>> LV Name engine
>>> VG Name gluster
>>> LV UUID 4gZ1TF-a1PX-i1Qx-o4Ix-MjEf-0HD8-esm3wg
>>> LV Write Access read/write
>>> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:00 -0800
>>> LV Status available
>>> # open 1
>>> LV Size 25.00 GiB
>>> Current LE 6400
>>> Segments 1
>>> Allocation inherit
>>> Read ahead sectors auto
>>> - currently set to 256
>>> Block device 253:2
>>>
>>> --- Logical volume ---
>>> LV Name lvthinpool
>>> VG Name gluster
>>> LV UUID aaNtso-fN1T-ZAkY-kUF2-dlxf-0ap2-JAwSid
>>> LV Write Access read/write
>>> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:09 -0800
>>> LV Pool metadata lvthinpool_tmeta
>>> LV Pool data lvthinpool_tdata
>>> LV Status available
>>> # open 4
>>> LV Size 150.00 GiB
>>> Allocated pool data 65.02%
>>> Allocated metadata 14.92%
>>> Current LE 38400
>>> Segments 1
>>> Allocation inherit
>>> Read ahead sectors auto
>>> - currently set to 256
>>> Block device 253:5
>>>
>>> --- Logical volume ---
>>> LV Path /dev/gluster/data
>>> LV Name data
>>> VG Name gluster
>>> LV UUID NBxLOJ-vp48-GM4I-D9ON-4OcB-hZrh-MrDacn
>>> LV Write Access read/write
>>> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:11 -0800
>>> LV Pool name lvthinpool
>>> LV Status available
>>> # open 1
>>> LV Size 100.00 GiB
>>> Mapped size 90.28%
>>> Current LE 25600
>>> Segments 1
>>> Allocation inherit
>>> Read ahead sectors auto
>>> - currently set to 256
>>> Block device 253:7
>>>
>>> --- Logical volume ---
>>> LV Path /dev/gluster/export
>>> LV Name export
>>> VG Name gluster
>>> LV UUID bih4nU-1QfI-tE12-ZLp0-fSR5-dlKt-YHkhx8
>>> LV Write Access read/write
>>> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:20 -0800
>>> LV Pool name lvthinpool
>>> LV Status available
>>> # open 1
>>> LV Size 25.00 GiB
>>> Mapped size 0.12%
>>> Current LE 6400
>>> Segments 1
>>> Allocation inherit
>>> Read ahead sectors auto
>>> - currently set to 256
>>> Block device 253:8
>>>
>>> --- Logical volume ---
>>> LV Path /dev/gluster/iso
>>> LV Name iso
>>> VG Name gluster
>>> LV UUID l8l1JU-ViD3-IFiZ-TucN-tGPE-Toqc-Q3R6uX
>>> LV Write Access read/write
>>> LV Creation host, time ovirt1.nwfiber.com, 2016-12-31 14:40:29 -0800
>>> LV Pool name lvthinpool
>>> LV Status available
>>> # open 1
>>> LV Size 25.00 GiB
>>> Mapped size 28.86%
>>> Current LE 6400
>>> Segments 1
>>> Allocation inherit
>>> Read ahead sectors auto
>>> - currently set to 256
>>> Block device 253:9
>>>
>>> --- Logical volume ---
>>> LV Path /dev/centos_ovirt/swap
>>> LV Name swap
>>> VG Name centos_ovirt
>>> LV UUID PcVQ11-hQ9U-9KZT-QPuM-HwT6-8o49-2hzNkQ
>>> LV Write Access read/write
>>> LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
>>> LV Status available
>>> # open 2
>>> LV Size 16.00 GiB
>>> Current LE 4096
>>> Segments 1
>>> Allocation inherit
>>> Read ahead sectors auto
>>> - currently set to 256
>>> Block device 253:1
>>>
>>> --- Logical volume ---
>>> LV Path /dev/centos_ovirt/root
>>> LV Name root
>>> VG Name centos_ovirt
>>> LV UUID g2h2fn-sF0r-Peos-hAE1-WEo9-WENO-MlO3ly
>>> LV Write Access read/write
>>> LV Creation host, time localhost, 2016-12-31 13:56:36 -0800
>>> LV Status available
>>> # open 1
>>> LV Size 20.00 GiB
>>> Current LE 5120
>>> Segments 1
>>> Allocation inherit
>>> Read ahead sectors auto
>>> - currently set to 256
>>> Block device 253:0
>>>
>>> ------------
>>>
>>> I don't use the export gluster volume, and I've never used
>>> lvthinpool-type allocations before, so I'm not sure if there's
anything
>>> special there.
>>>
>>> I followed the setup instructions from an ovirt contributed
>>> documentation that I can't find now that talked about how to install
ovirt
>>> with gluster on a 3-node cluster.
>>>
>>> Thank you for your assistance!
>>> --Jim
>>>
>>> On Thu, Mar 30, 2017 at 1:27 AM, Sahina Bose <sabose(a)redhat.com>
wrote:
>>>
>>>>
>>>>
>>>> On Thu, Mar 30, 2017 at 1:23 PM, Liron Aravot <laravot(a)redhat.com>
>>>> wrote:
>>>>
>>>>> Hi Jim, please see inline
>>>>>
>>>>> On Thu, Mar 30, 2017 at 4:08 AM, Jim Kusznir
<jim(a)palousetech.com>
>>>>> wrote:
>>>>>
>>>>>> hello:
>>>>>>
>>>>>> I've been running my ovirt Version 4.0.5.5-1.el7.centos
cluster for
>>>>>> a while now, and am now revisiting some aspects of it for
ensuring that I
>>>>>> have good reliability.
>>>>>>
>>>>>> My cluster is a 3 node cluster, with gluster nodes running on
each
>>>>>> node. After running my cluster a bit, I'm realizing I
didn't do a very
>>>>>> optimal job of allocating the space on my disk to the different
gluster
>>>>>> mount points. Fortunately, they were created with LVM, so
I'm hoping that
>>>>>> I can resize them without much trouble.
>>>>>>
>>>>>> I have a domain for iso, domain for export, and domain for
storage,
>>>>>> all thin provisioned; then a domain for the engine, not thin
provisioned.
>>>>>> I'd like to expand the storage domain, and possibly shrink
the engine
>>>>>> domain and make that space also available to the main storage
domain. Is
>>>>>> it as simple as expanding the LVM partition, or are there more
steps
>>>>>> involved? Do I need to take the node offline?
>>>>>>
>>>>>
>>>>> I didn't understand completely that part - what is the
difference
>>>>> between the domain for storage and the domain for engine you
mentioned?
>>>>>
>>>>
>>>> I think the domain for engine is the one storing Hosted Engine data.
>>>> You should be able to expand your underlying LVM partition without
>>>> having to take the node offline
>>>>
>>>>
>>>>>
>>>>>> second, I've noticed that the first two nodes seem to have a
full
>>>>>> copy of the data (the disks are in use), but the 3rd node appears
to not be
>>>>>> using any of its storage space...It is participating in the
gluster
>>>>>> cluster, though.
>>>>>>
>>>>>
>>>> Is the volume created as replica 3? If so, fully copy of the data
>>>> should be present on all 3 nodes. Please provide the output of
"gluster
>>>> volume info"
>>>>
>>>>
>>>>>> Third, currently gluster shares the same network as the VM
>>>>>> networks. I'd like to put it on its own network. I'm
not sure how to do
>>>>>> this, as when I tried to do it at install time, I never got the
cluster to
>>>>>> come online; I had to make them share the same network to make
that work.
>>>>>>
>>>>>
>>>> While creating the bricks the network intended for gluster should have
>>>> been used to identify the brick in hostname:brick-directory. Changing
this
>>>> at a later point is a bit more involved. Please check online or on
>>>> gluster-users on changing IP address associated with brick.
>>>>
>>>>
>>>>>
>>>>> I'm adding Sahina who may shed some light on the gluster
question,
>>>>> I'd try on the gluster mailing list as well.
>>>>>
>>>>>>
>>>>>>
>>>>>> Ovirt questions:
>>>>>> I've noticed that recently, I don't appear to be getting
software
>>>>>> updates anymore. I used to get update available notifications on
my nodes
>>>>>> every few days; I haven't seen one for a couple weeks now.
is something
>>>>>> wrong?
>>>>>>
>>>>>> I have a windows 10 x64 VM. I get a warning that my VM type
does
>>>>>> not match the installed OS. All works fine, but I've
quadrouple-checked
>>>>>> that it does match. Is this a known bug?
>>>>>>
>>>>>
>>>>> Arik, any info on that?
>>>>>
>>>>>>
>>>>>> I have a UPS that all three nodes and the networking are on. It
is
>>>>>> a USB UPS. How should I best integrate monitoring in? I could
put a
>>>>>> raspberry pi up and then run NUT or similar on it, but is there a
"better"
>>>>>> way with oVirt?
>>>>>>
>>>>>> Thanks!
>>>>>> --Jim
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users(a)ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
2567
days inactive
2593
days old
9 comments
4 participants
participants (4)
-
Alexander Wels -
Jim Kusznir -
Liron Aravot -
Sahina Bose