hosted-engine 4.2.1-pre setup on a clean node..
Is this supported? I have a node, that centos 7.4 minimal is installed on, with an interface setup for an IP address. I've yum installed nothing else except the ovirt-4.2.1-pre rpm, run screen, and then do the 'hosted-engine --deploy' command. It hangs on: [ INFO ] changed: [localhost] [ INFO ] TASK [Get ovirtmgmt route table id] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.004845", "end": "2018-02-02 12:03:30.794860", "rc": 0, "start": "2018-02-02 12:03:30.790015", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180202120333.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180202115038-r11nh1.log but the VM is up and running, just attached to the 192.168.122.0/24 subnet [root@d8-r13-c2-n1 ~]# ssh root@192.168.122.37 root@192.168.122.37's password: Last login: Fri Feb 2 11:54:47 2018 from 192.168.122.1 [root@ovirt ~]# systemctl status ovirt-engine ● ovirt-engine.service - oVirt Engine Loaded: loaded (/usr/lib/systemd/system/ovirt-engine.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2018-02-02 11:54:42 PST; 11min ago Main PID: 24724 (ovirt-engine.py) CGroup: /system.slice/ovirt-engine.service ├─24724 /usr/bin/python /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py --redirect-output --systemd=notify start └─24856 ovirt-engine -server -XX:+TieredCompilation -Xms3971M -Xmx3971M -Djava.awt.headless=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djsse... Feb 02 11:54:41 ovirt.crt.nersc.gov systemd[1]: Starting oVirt Engine... Feb 02 11:54:41 ovirt.crt.nersc.gov ovirt-engine.py[24724]: 2018-02-02 11:54:41,767-0800 ovirt-engine: INFO _detectJBossVersion:187 Detecting JBoss version. Running: /usr/lib/jvm/jre/...600000', '- Feb 02 11:54:42 ovirt.crt.nersc.gov ovirt-engine.py[24724]: 2018-02-02 11:54:42,394-0800 ovirt-engine: INFO _detectJBossVersion:207 Return code: 0, | stdout: '[u'WildFly Full 11.0.0....tderr: '[]' Feb 02 11:54:42 ovirt.crt.nersc.gov systemd[1]: Started oVirt Engine. Feb 02 11:55:25 ovirt.crt.nersc.gov python2[25640]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:29 ovirt.crt.nersc.gov python2[25698]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov python2[25741]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov python2[25767]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:31 ovirt.crt.nersc.gov python2[25795]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/etc/ovirt-engine-metrics/config.yml get_md5...ributes=True The 'ip rule list' never has an ovirtmgmt rule/table in it.. which means the ansible script loops then dies; vdsmd has never configured the network on the node. [root@d8-r13-c2-n1 ~]# systemctl status vdsmd -l ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2018-02-02 11:55:11 PST; 14min ago Main PID: 7654 (vdsmd) CGroup: /system.slice/vdsmd.service └─7654 /usr/bin/python2 /usr/share/vdsm/vdsmd Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running dummybr Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running tune_system Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_space Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_lo Feb 02 11:55:11 d8-r13-c2-n1 systemd[1]: Started Virtual Desktop Server Manager. Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN File: /var/run/vdsm/trackedInterfaces/vnet0 already removed Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN Not ready yet, ignoring event '|virt|VM_status|ba56a114-efb0-45e0-b2ad-808805ae93e0' args={'ba56a114-efb0-45e0-b2ad-808805ae93e0': {'status': 'Powering up', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '127.0.0.1', 'type': 'vnc', 'port': '5900'}], 'hash': '5328187475809024041', 'cpuUser': '0.00', 'monitorResponse': '0', 'elapsedTime': '0', 'cpuSys': '0.00', 'vcpuPeriod': 100000L, 'timeOffset': '0', 'clientIp': '', 'pauseCode': 'NOERR', 'vcpuQuota': '-1'}} Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available. Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available, KSM stats will be missing. Feb 02 11:55:17 d8-r13-c2-n1 vdsm[7654]: WARN ping was deprecated in favor of ping2 and confirmConnectivity Do I need to install a complete ovirt-engine on the node first, bring the node into ovirt, then bring up hosted-engine? I'd like to avoid this and just go straight to hosted-engine setup. thomas
On Fri, Feb 2, 2018 at 9:10 PM, Thomas Davis <tadavis@lbl.gov> wrote:
Is this supported?
I have a node, that centos 7.4 minimal is installed on, with an interface setup for an IP address.
I've yum installed nothing else except the ovirt-4.2.1-pre rpm, run screen, and then do the 'hosted-engine --deploy' command.
Fine, nothing else is required.
It hangs on:
[ INFO ] changed: [localhost] [ INFO ] TASK [Get ovirtmgmt route table id] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.004845", "end": "2018-02-02 12:03:30.794860", "rc": 0, "start": "2018-02-02 12:03:30.790015", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- setup/answers/answers-20180202120333.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine- setup/ovirt-hosted-engine-setup-20180202115038-r11nh1.log
but the VM is up and running, just attached to the 192.168.122.0/24 subnet
[root@d8-r13-c2-n1 ~]# ssh root@192.168.122.37 root@192.168.122.37's password: Last login: Fri Feb 2 11:54:47 2018 from 192.168.122.1 [root@ovirt ~]# systemctl status ovirt-engine ● ovirt-engine.service - oVirt Engine Loaded: loaded (/usr/lib/systemd/system/ovirt-engine.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2018-02-02 11:54:42 PST; 11min ago Main PID: 24724 (ovirt-engine.py) CGroup: /system.slice/ovirt-engine.service ├─24724 /usr/bin/python /usr/share/ovirt-engine/ services/ovirt-engine/ovirt-engine.py --redirect-output --systemd=notify start └─24856 ovirt-engine -server -XX:+TieredCompilation -Xms3971M -Xmx3971M -Djava.awt.headless=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djsse...
Feb 02 11:54:41 ovirt.crt.nersc.gov systemd[1]: Starting oVirt Engine... Feb 02 11:54:41 ovirt.crt.nersc.gov ovirt-engine.py[24724]: 2018-02-02 11:54:41,767-0800 ovirt-engine: INFO _detectJBossVersion:187 Detecting JBoss version. Running: /usr/lib/jvm/jre/...600000', '- Feb 02 11:54:42 ovirt.crt.nersc.gov ovirt-engine.py[24724]: 2018-02-02 11:54:42,394-0800 ovirt-engine: INFO _detectJBossVersion:207 Return code: 0, | stdout: '[u'WildFly Full 11.0.0....tderr: '[]' Feb 02 11:54:42 ovirt.crt.nersc.gov systemd[1]: Started oVirt Engine. Feb 02 11:55:25 ovirt.crt.nersc.gov python2[25640]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:29 ovirt.crt.nersc.gov python2[25698]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov python2[25741]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov python2[25767]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:31 ovirt.crt.nersc.gov python2[25795]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/etc/ovirt-engine-metrics/config.yml get_md5...ributes=True
The 'ip rule list' never has an ovirtmgmt rule/table in it.. which means the ansible script loops then dies; vdsmd has never configured the network on the node.
Right. Can you please attach engine.log and host-deploy from the engine VM?
[root@d8-r13-c2-n1 ~]# systemctl status vdsmd -l ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2018-02-02 11:55:11 PST; 14min ago Main PID: 7654 (vdsmd) CGroup: /system.slice/vdsmd.service └─7654 /usr/bin/python2 /usr/share/vdsm/vdsmd
Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running dummybr Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running tune_system Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_space Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_lo Feb 02 11:55:11 d8-r13-c2-n1 systemd[1]: Started Virtual Desktop Server Manager. Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN File: /var/run/vdsm/trackedInterfaces/vnet0 already removed Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN Not ready yet, ignoring event '|virt|VM_status|ba56a114-efb0-45e0-b2ad-808805ae93e0' args={'ba56a114-efb0-45e0-b2ad-808805ae93e0': {'status': 'Powering up', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '127.0.0.1', 'type': 'vnc', 'port': '5900'}], 'hash': '5328187475809024041', 'cpuUser': '0.00', 'monitorResponse': '0', 'elapsedTime': '0', 'cpuSys': '0.00', 'vcpuPeriod': 100000L, 'timeOffset': '0', 'clientIp': '', 'pauseCode': 'NOERR', 'vcpuQuota': '-1'}} Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available. Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available, KSM stats will be missing. Feb 02 11:55:17 d8-r13-c2-n1 vdsm[7654]: WARN ping was deprecated in favor of ping2 and confirmConnectivity
Do I need to install a complete ovirt-engine on the node first, bring the node into ovirt, then bring up hosted-engine? I'd like to avoid this and just go straight to hosted-engine setup.
thomas
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
In playing with this, I found that 4.2.1 hosted-engine will not install on a node with the ovirtmgmt interface being a vlan. Is this a still supported config? I see that access port, bonded and vlan tagged are supported by older versions.. thomas On 02/05/2018 08:16 AM, Simone Tiraboschi wrote:
On Fri, Feb 2, 2018 at 9:10 PM, Thomas Davis <tadavis@lbl.gov <mailto:tadavis@lbl.gov>> wrote:
Is this supported?
I have a node, that centos 7.4 minimal is installed on, with an interface setup for an IP address.
I've yum installed nothing else except the ovirt-4.2.1-pre rpm, run screen, and then do the 'hosted-engine --deploy' command.
Fine, nothing else is required.
It hangs on:
[ INFO ] changed: [localhost] [ INFO ] TASK [Get ovirtmgmt route table id] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.004845", "end": "2018-02-02 12:03:30.794860", "rc": 0, "start": "2018-02-02 12:03:30.790015", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180202120333.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20180202115038-r11nh1.log
but the VM is up and running, just attached to the 192.168.122.0/24 <http://192.168.122.0/24> subnet
[root@d8-r13-c2-n1 ~]# ssh root@192.168.122.37 <mailto:root@192.168.122.37> root@192.168.122.37 <mailto:root@192.168.122.37>'s password: Last login: Fri Feb 2 11:54:47 2018 from 192.168.122.1 [root@ovirt ~]# systemctl status ovirt-engine ● ovirt-engine.service - oVirt Engine Loaded: loaded (/usr/lib/systemd/system/ovirt-engine.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2018-02-02 11:54:42 PST; 11min ago Main PID: 24724 (ovirt-engine.py) CGroup: /system.slice/ovirt-engine.service ├─24724 /usr/bin/python /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py --redirect-output --systemd=notify start └─24856 ovirt-engine -server -XX:+TieredCompilation -Xms3971M -Xmx3971M -Djava.awt.headless=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djsse...
Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> systemd[1]: Starting oVirt Engine... Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> ovirt-engine.py[24724]: 2018-02-02 11:54:41,767-0800 ovirt-engine: INFO _detectJBossVersion:187 Detecting JBoss version. Running: /usr/lib/jvm/jre/...600000', '- Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> ovirt-engine.py[24724]: 2018-02-02 11:54:42,394-0800 ovirt-engine: INFO _detectJBossVersion:207 Return code: 0, | stdout: '[u'WildFly Full 11.0.0....tderr: '[]' Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> systemd[1]: Started oVirt Engine. Feb 02 11:55:25 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25640]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:29 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25698]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25741]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25767]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:31 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25795]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/etc/ovirt-engine-metrics/config.yml get_md5...ributes=True
The 'ip rule list' never has an ovirtmgmt rule/table in it.. which means the ansible script loops then dies; vdsmd has never configured the network on the node.
Right. Can you please attach engine.log and host-deploy from the engine VM?
[root@d8-r13-c2-n1 ~]# systemctl status vdsmd -l ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2018-02-02 11:55:11 PST; 14min ago Main PID: 7654 (vdsmd) CGroup: /system.slice/vdsmd.service └─7654 /usr/bin/python2 /usr/share/vdsm/vdsmd
Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running dummybr Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running tune_system Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_space Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_lo Feb 02 11:55:11 d8-r13-c2-n1 systemd[1]: Started Virtual Desktop Server Manager. Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN File: /var/run/vdsm/trackedInterfaces/vnet0 already removed Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN Not ready yet, ignoring event '|virt|VM_status|ba56a114-efb0-45e0-b2ad-808805ae93e0' args={'ba56a114-efb0-45e0-b2ad-808805ae93e0': {'status': 'Powering up', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '127.0.0.1', 'type': 'vnc', 'port': '5900'}], 'hash': '5328187475809024041', 'cpuUser': '0.00', 'monitorResponse': '0', 'elapsedTime': '0', 'cpuSys': '0.00', 'vcpuPeriod': 100000L, 'timeOffset': '0', 'clientIp': '', 'pauseCode': 'NOERR', 'vcpuQuota': '-1'}} Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available. Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available, KSM stats will be missing. Feb 02 11:55:17 d8-r13-c2-n1 vdsm[7654]: WARN ping was deprecated in favor of ping2 and confirmConnectivity
Do I need to install a complete ovirt-engine on the node first, bring the node into ovirt, then bring up hosted-engine? I'd like to avoid this and just go straight to hosted-engine setup.
thomas
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
On Thu, Feb 15, 2018 at 5:20 PM, Thomas Davis <tadavis@lbl.gov> wrote:
In playing with this, I found that 4.2.1 hosted-engine will not install on a node with the ovirtmgmt interface being a vlan.
Can you please attach vdsm and host-deploy logs?
Is this a still supported config? I see that access port, bonded and vlan tagged are supported by older versions..
Yes, absolutely: if not VLAN doens't work it's definitively an issue. Adding Ido here.
thomas
On 02/05/2018 08:16 AM, Simone Tiraboschi wrote:
On Fri, Feb 2, 2018 at 9:10 PM, Thomas Davis <tadavis@lbl.gov <mailto: tadavis@lbl.gov>> wrote:
Is this supported?
I have a node, that centos 7.4 minimal is installed on, with an interface setup for an IP address.
I've yum installed nothing else except the ovirt-4.2.1-pre rpm, run screen, and then do the 'hosted-engine --deploy' command.
Fine, nothing else is required.
It hangs on:
[ INFO ] changed: [localhost] [ INFO ] TASK [Get ovirtmgmt route table id] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.004845", "end": "2018-02-02 12:03:30.794860", "rc": 0, "start": "2018-02-02 12:03:30.790015", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180202 120333.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup -20180202115038-r11nh1.log
but the VM is up and running, just attached to the 192.168.122.0/24 <http://192.168.122.0/24> subnet
[root@d8-r13-c2-n1 ~]# ssh root@192.168.122.37 <mailto:root@192.168.122.37> root@192.168.122.37 <mailto:root@192.168.122.37>'s password: Last login: Fri Feb 2 11:54:47 2018 from 192.168.122.1 [root@ovirt ~]# systemctl status ovirt-engine ● ovirt-engine.service - oVirt Engine Loaded: loaded (/usr/lib/systemd/system/ovirt-engine.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2018-02-02 11:54:42 PST; 11min ago Main PID: 24724 (ovirt-engine.py) CGroup: /system.slice/ovirt-engine.service ├─24724 /usr/bin/python /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py --redirect-output --systemd=notify start └─24856 ovirt-engine -server -XX:+TieredCompilation -Xms3971M -Xmx3971M -Djava.awt.headless=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djsse...
Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> systemd[1]: Starting oVirt Engine... Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> ovirt-engine.py[24724]: 2018-02-02 11:54:41,767-0800 ovirt-engine: INFO _detectJBossVersion:187 Detecting JBoss version. Running: /usr/lib/jvm/jre/...600000', '- Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> ovirt-engine.py[24724]: 2018-02-02 11:54:42,394-0800 ovirt-engine: INFO _detectJBossVersion:207 Return code: 0, | stdout: '[u'WildFly Full 11.0.0....tderr: '[]' Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> systemd[1]: Started oVirt Engine. Feb 02 11:55:25 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25640]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:29 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25698]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25741]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25767]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:31 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
python2[25795]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/etc/ovirt-engine-metrics/config.yml get_md5...ributes=True
The 'ip rule list' never has an ovirtmgmt rule/table in it.. which means the ansible script loops then dies; vdsmd has never configured the network on the node.
Right. Can you please attach engine.log and host-deploy from the engine VM?
[root@d8-r13-c2-n1 ~]# systemctl status vdsmd -l ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2018-02-02 11:55:11 PST; 14min ago Main PID: 7654 (vdsmd) CGroup: /system.slice/vdsmd.service └─7654 /usr/bin/python2 /usr/share/vdsm/vdsmd
Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running dummybr Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running tune_system Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_space Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_lo Feb 02 11:55:11 d8-r13-c2-n1 systemd[1]: Started Virtual Desktop Server Manager. Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN File: /var/run/vdsm/trackedInterfaces/vnet0 already removed Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN Not ready yet, ignoring event '|virt|VM_status|ba56a114-efb0-45e0-b2ad-808805ae93e0' args={'ba56a114-efb0-45e0-b2ad-808805ae93e0': {'status': 'Powering up', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '127.0.0.1', 'type': 'vnc', 'port': '5900'}], 'hash': '5328187475809024041', 'cpuUser': '0.00', 'monitorResponse': '0', 'elapsedTime': '0', 'cpuSys': '0.00', 'vcpuPeriod': 100000L, 'timeOffset': '0', 'clientIp': '', 'pauseCode': 'NOERR', 'vcpuQuota': '-1'}} Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available. Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available, KSM stats will be missing. Feb 02 11:55:17 d8-r13-c2-n1 vdsm[7654]: WARN ping was deprecated in favor of ping2 and confirmConnectivity
Do I need to install a complete ovirt-engine on the node first, bring the node into ovirt, then bring up hosted-engine? I'd like to avoid this and just go straight to hosted-engine setup.
thomas
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
On Thu, Feb 15, 2018 at 5:56 PM, Simone Tiraboschi <stirabos@redhat.com> wrote:
On Thu, Feb 15, 2018 at 5:20 PM, Thomas Davis <tadavis@lbl.gov> wrote:
In playing with this, I found that 4.2.1 hosted-engine will not install on a node with the ovirtmgmt interface being a vlan.
Can you please attach vdsm and host-deploy logs?
Is this a still supported config? I see that access port, bonded and vlan tagged are supported by older versions..
Yes, absolutely: if not VLAN doens't work it's definitively an issue. Adding Ido here.
Oh, just another thing. The old flow is still there as a deprecated fallback. You can force it passing --noansible option.
thomas
On 02/05/2018 08:16 AM, Simone Tiraboschi wrote:
On Fri, Feb 2, 2018 at 9:10 PM, Thomas Davis <tadavis@lbl.gov <mailto: tadavis@lbl.gov>> wrote:
Is this supported?
I have a node, that centos 7.4 minimal is installed on, with an interface setup for an IP address.
I've yum installed nothing else except the ovirt-4.2.1-pre rpm, run screen, and then do the 'hosted-engine --deploy' command.
Fine, nothing else is required.
It hangs on:
[ INFO ] changed: [localhost] [ INFO ] TASK [Get ovirtmgmt route table id] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "ip rule list | grep ovirtmgmt | sed s/\\\\[.*\\\\]\\ //g | awk '{ print $9 }'", "delta": "0:00:00.004845", "end": "2018-02-02 12:03:30.794860", "rc": 0, "start": "2018-02-02 12:03:30.790015", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180202 120333.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup -20180202115038-r11nh1.log
but the VM is up and running, just attached to the 192.168.122.0/24 <http://192.168.122.0/24> subnet
[root@d8-r13-c2-n1 ~]# ssh root@192.168.122.37 <mailto:root@192.168.122.37> root@192.168.122.37 <mailto:root@192.168.122.37>'s password: Last login: Fri Feb 2 11:54:47 2018 from 192.168.122.1 [root@ovirt ~]# systemctl status ovirt-engine ● ovirt-engine.service - oVirt Engine Loaded: loaded (/usr/lib/systemd/system/ovirt-engine.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2018-02-02 11:54:42 PST; 11min ago Main PID: 24724 (ovirt-engine.py) CGroup: /system.slice/ovirt-engine.service ├─24724 /usr/bin/python /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py --redirect-output --systemd=notify start └─24856 ovirt-engine -server -XX:+TieredCompilation -Xms3971M -Xmx3971M -Djava.awt.headless=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djsse...
Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> systemd[1]: Starting oVirt Engine... Feb 02 11:54:41 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> ovirt-engine.py[24724]: 2018-02-02 11:54:41,767-0800 ovirt-engine: INFO _detectJBossVersion:187 Detecting JBoss version. Running: /usr/lib/jvm/jre/...600000', '- Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> ovirt-engine.py[24724]: 2018-02-02 11:54:42,394-0800 ovirt-engine: INFO _detectJBossVersion:207 Return code: 0, | stdout: '[u'WildFly Full 11.0.0....tderr: '[]' Feb 02 11:54:42 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> systemd[1]: Started oVirt Engine. Feb 02 11:55:25 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25640]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:29 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25698]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25741]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:30 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov> python2[25767]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/usr/share/ovirt-engine/playbooks/roles/ovir...ributes=True Feb 02 11:55:31 ovirt.crt.nersc.gov <http://ovirt.crt.nersc.gov>
python2[25795]: ansible-stat Invoked with checksum_algorithm=sha1 get_checksum=True follow=False path=/etc/ovirt-engine-metrics/config.yml get_md5...ributes=True
The 'ip rule list' never has an ovirtmgmt rule/table in it.. which means the ansible script loops then dies; vdsmd has never configured the network on the node.
Right. Can you please attach engine.log and host-deploy from the engine VM?
[root@d8-r13-c2-n1 ~]# systemctl status vdsmd -l ● vdsmd.service - Virtual Desktop Server Manager Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2018-02-02 11:55:11 PST; 14min ago Main PID: 7654 (vdsmd) CGroup: /system.slice/vdsmd.service └─7654 /usr/bin/python2 /usr/share/vdsm/vdsmd
Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running dummybr Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running tune_system Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_space Feb 02 11:55:11 d8-r13-c2-n1 vdsmd_init_common.sh[7551]: vdsm: Running test_lo Feb 02 11:55:11 d8-r13-c2-n1 systemd[1]: Started Virtual Desktop Server Manager. Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN File: /var/run/vdsm/trackedInterfaces/vnet0 already removed Feb 02 11:55:12 d8-r13-c2-n1 vdsm[7654]: WARN Not ready yet, ignoring event '|virt|VM_status|ba56a114-efb0-45e0-b2ad-808805ae93e0' args={'ba56a114-efb0-45e0-b2ad-808805ae93e0': {'status': 'Powering up', 'displayInfo': [{'tlsPort': '-1', 'ipAddress': '127.0.0.1', 'type': 'vnc', 'port': '5900'}], 'hash': '5328187475809024041', 'cpuUser': '0.00', 'monitorResponse': '0', 'elapsedTime': '0', 'cpuSys': '0.00', 'vcpuPeriod': 100000L, 'timeOffset': '0', 'clientIp': '', 'pauseCode': 'NOERR', 'vcpuQuota': '-1'}} Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available. Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available, KSM stats will be missing. Feb 02 11:55:17 d8-r13-c2-n1 vdsm[7654]: WARN ping was deprecated in favor of ping2 and confirmConnectivity
Do I need to install a complete ovirt-engine on the node first, bring the node into ovirt, then bring up hosted-engine? I'd like to avoid this and just go straight to hosted-engine setup.
thomas
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
Can you please attach vdsm and host-deploy logs?
This is what I saw in engine.log 2018-02-15 13:49:26,850Z INFO [org.ovirt.engine.core.bll.host.HostConnectivityChecker] (EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] Engine managed to communicate wi th VDSM agent on host 'ovirt1' with address 'ovirt1' ('06651b32-4ef8-4b5d-ab2d-c38e84c2d790') 2018-02-15 13:49:30,302Z ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] EVENT_ID: VLAN_ID_ MISMATCH_FOR_MANAGEMENT_NETWORK_CONFIGURATION(1,119), Failed to configure management network on host ovirt1. Host ovirt1 has an interface bond0.1005 for the management netwo rk configuration with VLAN-ID (1005), which is different from data-center definition (none). 2018-02-15 13:49:30,302Z ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] Exception: org.ovirt.eng ine.core.bll.network.NetworkConfigurator$NetworkConfiguratorException: Failed to configure management network It seems that ovirtmgmt creation is skipper because inconsistency between datacenter setup and host setup. Of course we can not configure the vlan for mgmt network in datacenter because we are still deploying Salu2! -- Miguel Armas CanaryTek Consultoria y Sistemas SL http://www.canarytek.com/
On Thu, Feb 15, 2018 at 6:42 PM, Kuko Armas <kuko@canarytek.com> wrote:
Can you please attach vdsm and host-deploy logs?
This is what I saw in engine.log
2018-02-15 13:49:26,850Z INFO [org.ovirt.engine.core.bll.host.HostConnectivityChecker] (EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] Engine managed to communicate wi th VDSM agent on host 'ovirt1' with address 'ovirt1' ('06651b32-4ef8-4b5d-ab2d-c38e84c2d790') 2018-02-15 13:49:30,302Z ERROR [org.ovirt.engine.core.dal. dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] EVENT_ID: VLAN_ID_ MISMATCH_FOR_MANAGEMENT_NETWORK_CONFIGURATION(1,119), Failed to configure management network on host ovirt1. Host ovirt1 has an interface bond0.1005 for the management netwo rk configuration with VLAN-ID (1005), which is different from data-center definition (none). 2018-02-15 13:49:30,302Z ERROR [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] Exception: org.ovirt.eng ine.core.bll.network.NetworkConfigurator$NetworkConfiguratorException: Failed to configure management network
It seems that ovirtmgmt creation is skipper because inconsistency between datacenter setup and host setup. Of course we can not configure the vlan for mgmt network in datacenter because we are still deploying
Yes, you are absolutely right: the setup has to set the VLAN ID at datacenter level before adding the host as the old flow was doing.
Salu2! -- Miguel Armas CanaryTek Consultoria y Sistemas SL http://www.canarytek.com/
In playing with this, I found that 4.2.1 hosted-engine will not install on a node with the ovirtmgmt interface being a vlan.
Is this a still supported config? I see that access port, bonded and vlan tagged are supported by older versions..
That's **exactly** the same problem I just posted some hours ago ;) Salu2! -- Miguel Armas CanaryTek Consultoria y Sistemas SL http://www.canarytek.com/
participants (3)
-
Kuko Armas -
Simone Tiraboschi -
Thomas Davis