I tested the ISO here.=20

- I was able to register with the engine and aprove (thing with 'oVirt-node-3.0.1-iso-1.0.2.vdsm.el6.iso' version was not possible)

- Firewall: Being duplicated the rule of vdsm port (54321). - 'Sanlock' is being blocked by 'selinux' (audit.log attached)

- NIC was messy .. :P (eth0, eth4, eth5, eth6... )..

=20 =20 =20 2014/1/17 Fabian Deutsch <fabiand(a)redhat.com&gt; Hey, =20 as many of you have noticed there wasn't any well working oVirt Node ISO around for oVirt 3.3. To get this ball rolling again I've put together a draft image of ALPHA quality. It contains many fixes some of us have been working on over the last weeks. =20 - Source & ISO - To not drown Jenkins in a hell-of-a-patch-queue I've pushed the patches to =20 https://github.com/fabiand/ovirt-node/tree/teamsync =20 The ISO built from that patchset can be found here: =20 http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-=

=20 Please test this draft image and provide feedback on how it works for you. If you encounter problems - and you probably will - please take a look here on how to debug them: =20 http://www.ovirt.org/Node_Troubleshooting =20 - Important Notes - SELinux: Boot this alpha image with enforcing=3D0 to log potential denials, but not block the calls. To fix those denials permanently please attach your /var/log/audit/audit.log to a bug in bugzilla. =20 Known problems: - Exception is raised after registration to Engine - Many bond devices are show on network page - Denials appear in /var/log/audit/audit.log =20 =20 And don't hesitate to reach out to us if you want to get more involved with Node. =20 - fabian =20 =20 =20 --=20 =E2=95=94=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=

=E2=95=91=E2=96=92=E2=96=92=E2=96=92=E2=96=92=E2=96=92=E2=96=92=E2=96=92=

=E2=95=91----------------------------------------------=E2=95=91 =E2=95=91 Blog: http://www.laerciomotta.com/ =E2=95=91 =E2=95=91 Twitter: http://twitter.com/#!/laerciomasala =E2=95=91 =E2=95=91 Skype: laerciomasala =E2=95=91 =E2=95=91 Chave PGP: http://bit.ly/kXS6ga =E2=95=91 =E2=95=9A=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=

-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (GNU/Linux) iQIcBAABAgAGBQJS2ZIEAAoJEC9+uOgSHVGU6EkP/3MbphzgV5YAemAc2qKYoczh A2giAsngabCfEQx+ZZfXOsDKg0/glE6faxF7YQTEuBcE5ZEtULZhsmNLZCgjqGeg iq/CxB1BXW3V4kUbdiWq3yeY0Oz+0iYzRFDAd4IWvA11CGQpm8Olcf4ga6SCVDfR k/OoEhToacxidzLxGaFnWocyBETDTMaLx0M6t6Us2Yy1D5/wrznXgAJ/hQMQzlqm UxY3BhmkrimvnpfPh49Bpu4dVbn4qJdoWGPBYRGNSkdkp/HdqVOZpPAYi2y2ok/9 nujMyUtYxpPCtyXF3+5PqcZzItLid72ypFUJlKpHQTfP21YVDCpgZ8vjRtgc1EXa VIjOMswM8rAYk/YoXGuKaziuW26Jq3dP/H4vHY0G8VRo56cB+4ZrRU6EbkPVFP5z PvwwpDhaOQSjWZiiwz8YfnsoJMhJVI7W12EqWd/5ktrHbcZBlnlAUn/7qDic+faj 2lCaa5o6lRG7TuJa2GqH3OUswV7Lq+d/+B58Kdp8F6d2Br6jadjKQFBM+cG1u9Fs NBqPK+EHtIMjLv8jQzhDxm+0JZ68PIetbsUlK/bGda+exkX+xXOpDULsNL+3HHYH VqCFqTp2HcaOrLN1Z2SEkaLl82cOwP+sBAjKwmzkABpikM68mXoDJxhK6DpT8VQ+ AucT2UfAxsoq1tPMl28v =f7lE -----END PGP SIGNATURE-----

Hi, > Could you explain this a bit more? > Did all NICs appear, or did to many NICs appear? I'm used to udev leave my NIC in sequence. And in this case it got messed up: common: eth0 -> port 1 eth1 -> port 2 ethx >> port X What happened: eth0 -> port 1 eth4 -> port 3 eth5 -> port 4 eth6 -> port 2 As follows attached file .. Not a big problem .. But it confused me a little time to configure the network of 'nodes' ... Had to use tcpdump (thankfully that was available) to find out which interface belonged to what port Switch for CDP: P 2014/1/17 Fabian Deutsch <fabiand(a)redhat.com&gt; > Hi Laercio, > > Am Freitag, den 17.01.2014, 14:49 -0200 schrieb Laercio Motta: > > > I tested the ISO here. > > Thanks for being that brave! ;) > > > - I was able to register with the engine and aprove (thing with > > 'oVirt-node-3.0.1-iso-1.0.2.vdsm.el6.iso' version was not possible) > > Great that this works now. > > > - Firewall: Being duplicated the rule of vdsm port (54321). > > - 'Sanlock' is being blocked by 'selinux' (audit.log attached) > > Okay, those are probably bugs we need to take care of. > > > - NIC was messy .. :P (eth0, eth4, eth5, eth6... ).. > > Could you explain this a bit more? > Did all NICs appear, or did to many NICs appear? > > Thanks > fabian > > > > > > > > > 2014/1/17 Fabian Deutsch <fabiand(a)redhat.com&gt; > > Hey, > > > > as many of you have noticed there wasn't any well working > > oVirt Node ISO > > around for oVirt 3.3. > > To get this ball rolling again I've put together a draft image > > of ALPHA > > quality. It contains many fixes some of us have been working > > on over the > > last weeks. > > > > - Source & ISO - > > To not drown Jenkins in a hell-of-a-patch-queue I've pushed > > the patches to > > > > https://github.com/fabiand/ovirt-node/tree/teamsync > > > > The ISO built from that patchset can be found here: > > > > > http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.20... > > > > Please test this draft image and provide feedback on how it > > works for > > you. > > If you encounter problems - and you probably will - please > > take a look > > here on how to debug them: > > > > http://www.ovirt.org/Node_Troubleshooting > > > > - Important Notes - > > SELinux: Boot this alpha image with enforcing=0 to log > > potential > > denials, but not block the calls. To fix those denials > > permanently > > please attach your /var/log/audit/audit.log to a bug in > > bugzilla. > > > > Known problems: > > - Exception is raised after registration to Engine > > - Many bond devices are show on network page > > - Denials appear in /var/log/audit/audit.log > > > > > > And don't hesitate to reach out to us if you want to get more > > involved > > with Node. > > > > - fabian > > > > > > > > -- > > ╔══════════════════════════════════════════════╗ > > ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║ > > ║----------------------------------------------║ > > ║ Blog: http://www.laerciomotta.com/ ║ > > ║ Twitter: http://twitter.com/#!/laerciomasala ║ > > ║ Skype: laerciomasala ║ > > ║ Chave PGP: http://bit.ly/kXS6ga ║ > > ╚═════════════════════════════════════════v1.0═╝ > > -- ╔══════════════════════════════════════════════╗ ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║ ║----------------------------------------------║ ║* Blog: *http://www.laerciomotta.com/ ║ ║ *Twitter:* http://twitter.com/#!/laerciomasala ║ ║ *Skype*: laerciomasala ║ ║ Chave PGP: http://bit.ly/kXS6ga ║ ╚═════════════════════════════════════════v1.0═╝

Am Montag, den 20.01.2014, 13:10 -0200 schrieb Laercio Motta: > Understand?? o.0 Hey Laercio, sorry for the delay. I think I do understand the problem: The NIC order is different the previously, right? When you configure a NIC you cna use the <Flash NIC to identify> button to identify a special NIC. We won't change this on el6 - but the Feora based Node should be using predictable network names, which is addressing this issue. - fabian > > > 2014/1/17 Laercio Motta <laerciomasala(a)gmail.com&gt; > Hi, > > > > Could you explain this a bit more? > > Did all NICs appear, or did to many NICs appear? > > > I'm used to udev leave my NIC in sequence. > And in this case it got messed up: > common: > eth0 -> port 1 > eth1 -> port 2 > ethx >> port X > > What happened: > eth0 -> port 1 > eth4 -> port 3 > eth5 -> port 4 > eth6 -> port 2 > > As follows attached file .. > > Not a big problem .. But it confused me a little time to > configure the network of 'nodes' ... Had to use tcpdump > (thankfully that was available) to find out which interface > belonged to what port Switch for CDP: P > > > > > 2014/1/17 Fabian Deutsch <fabiand(a)redhat.com&gt; > Hi Laercio, > > Am Freitag, den 17.01.2014, 14:49 -0200 schrieb > Laercio Motta: > > > I tested the ISO here. > > > Thanks for being that brave! ;) > > > - I was able to register with the engine and aprove > (thing with > > 'oVirt-node-3.0.1-iso-1.0.2.vdsm.el6.iso' version > was not possible) > > > Great that this works now. > > > - Firewall: Being duplicated the rule of vdsm port > (54321). > > - 'Sanlock' is being blocked by 'selinux' (audit.log > attached) > > > Okay, those are probably bugs we need to take care of. > > > - NIC was messy .. :P (eth0, eth4, eth5, eth6... ).. > > > Could you explain this a bit more? > Did all NICs appear, or did to many NICs appear? > > Thanks > fabian > > > > > > > > > 2014/1/17 Fabian Deutsch <fabiand(a)redhat.com&gt; > > Hey, > > > > as many of you have noticed there wasn't any > well working > > oVirt Node ISO > > around for oVirt 3.3. > > To get this ball rolling again I've put > together a draft image > > of ALPHA > > quality. It contains many fixes some of us > have been working > > on over the > > last weeks. > > > > - Source & ISO - > > To not drown Jenkins in a > hell-of-a-patch-queue I've pushed > > the patches to > > > > > https://github.com/fabiand/ovirt-node/tree/teamsync > > > > The ISO built from that patchset can be > found here: > > > > > http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.20... > > > > Please test this draft image and provide > feedback on how it > > works for > > you. > > If you encounter problems - and you probably > will - please > > take a look > > here on how to debug them: > > > > http://www.ovirt.org/Node_Troubleshooting > > > > - Important Notes - > > SELinux: Boot this alpha image with > enforcing=0 to log > > potential > > denials, but not block the calls. To fix > those denials > > permanently > > please attach your /var/log/audit/audit.log > to a bug in > > bugzilla. > > > > Known problems: > > - Exception is raised after registration to > Engine > > - Many bond devices are show on network page > > - Denials appear in /var/log/audit/audit.log > > > > > > And don't hesitate to reach out to us if you > want to get more > > involved > > with Node. > > > > - fabian > > > > > > > > -- > > ╔══════════════════════════════════════════════╗ > > ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║ > > ║----------------------------------------------║ > > ║ Blog: http://www.laerciomotta.com/ ║ > > ║ Twitter: http://twitter.com/#!/laerciomasala ║ > > ║ Skype: laerciomasala ║ > > ║ Chave PGP: http://bit.ly/kXS6ga ║ > > ╚═════════════════════════════════════════v1.0═╝ > > > > > > -- > ╔══════════════════════════════════════════════╗ > ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║ > ║----------------------------------------------║ > ║ Blog: http://www.laerciomotta.com/ ║ > ║ Twitter: http://twitter.com/#!/laerciomasala ║ > ║ Skype: laerciomasala ║ > ║ Chave PGP: http://bit.ly/kXS6ga ║ > ╚═════════════════════════════════════════v1.0═╝ > > > > -- > ╔══════════════════════════════════════════════╗ > ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║ > ║----------------------------------------------║ > ║ Blog: http://www.laerciomotta.com/ ║ > ║ Twitter: http://twitter.com/#!/laerciomasala ║ > ║ Skype: laerciomasala ║ > ║ Chave PGP: http://bit.ly/kXS6ga ║ > ╚═════════════════════════════════════════v1.0═╝