Hi, I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:) Thanks -- Jose Ferradeira http://www.logicworks.pt
An RH subscription is not needed to install ovirt metrics. On Thu, Nov 14, 2019 at 12:21 PM <suporte@logicworks.pt> wrote:
Hi,
I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:)
Thanks
-- ------------------------------ Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ...
Ok, so how can I get the guest image? Thanks De: "Jayme" <jaymef@gmail.com> Para: suporte@logicworks.pt Cc: "users" <users@ovirt.org> Enviadas: Quinta-feira, 14 De Novembro de 2019 17:05:31 Assunto: Re: [ovirt-users] metrics An RH subscription is not needed to install ovirt metrics. On Thu, Nov 14, 2019 at 12:21 PM < suporte@logicworks.pt > wrote: Hi, I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:) Thanks -- Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ...
It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented On Thu, Nov 14, 2019 at 1:06 PM <suporte@logicworks.pt> wrote:
Ok, so how can I get the guest image?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:05:31 *Assunto: *Re: [ovirt-users] metrics
An RH subscription is not needed to install ovirt metrics.
On Thu, Nov 14, 2019 at 12:21 PM <suporte@logicworks.pt> wrote:
Hi,
I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:)
Thanks
-- ------------------------------ Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ...
Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0 but nothing happens I think I need the URL with openshift upstream I'm a newbie with openshift, can you point me to the right direction? Thanks De: "Jayme" <jaymef@gmail.com> Para: suporte@logicworks.pt Cc: "users" <users@ovirt.org> Enviadas: Quinta-feira, 14 De Novembro de 2019 17:15:26 Assunto: Re: [ovirt-users] metrics It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented On Thu, Nov 14, 2019 at 1:06 PM < suporte@logicworks.pt > wrote: Ok, so how can I get the guest image? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:05:31 Assunto: Re: [ovirt-users] metrics An RH subscription is not needed to install ovirt metrics. On Thu, Nov 14, 2019 at 12:21 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Hi, I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:) Thanks -- Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ... BQ_END
this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2 On Thu, Nov 14, 2019 at 1:38 PM <suporte@logicworks.pt> wrote:
Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0
but nothing happens I think I need the URL with openshift upstream
I'm a newbie with openshift, can you point me to the right direction?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:15:26 *Assunto: *Re: [ovirt-users] metrics
It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented
On Thu, Nov 14, 2019 at 1:06 PM <suporte@logicworks.pt> wrote:
Ok, so how can I get the guest image?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:05:31 *Assunto: *Re: [ovirt-users] metrics
An RH subscription is not needed to install ovirt metrics.
On Thu, Nov 14, 2019 at 12:21 PM <suporte@logicworks.pt> wrote:
Hi,
I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:)
Thanks
-- ------------------------------ Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ...
Hello, Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" } I think this is the problem? Any idea? Thanks a lot José De: "Jayme" <jaymef@gmail.com> Para: suporte@logicworks.pt Cc: "users" <users@ovirt.org> Enviadas: Quinta-feira, 14 De Novembro de 2019 18:06:51 Assunto: Re: [ovirt-users] metrics this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2 On Thu, Nov 14, 2019 at 1:38 PM < suporte@logicworks.pt > wrote: Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0 but nothing happens I think I need the URL with openshift upstream I'm a newbie with openshift, can you point me to the right direction? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:15:26 Assunto: Re: [ovirt-users] metrics It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented On Thu, Nov 14, 2019 at 1:06 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok, so how can I get the guest image? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:05:31 Assunto: Re: [ovirt-users] metrics An RH subscription is not needed to install ovirt metrics. On Thu, Nov 14, 2019 at 12:21 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Hi, I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:) Thanks -- Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ... BQ_END BQ_END
Well, I did a mistake when copying the metrics-store-config.yml But now I'm getting this error ...... FAILED - RETRYING: Wait for resize (1 retries left) fatal: [localhost]: FAILED! => {"attempts": 40, "changed": false, "disk": {"actual_size": 942409728, "alias": "centos76", "backup": "none", "content_type": "data", "description": "", "disk_profile": {"href": "/ovirt-engine/api/diskprofiles/13b70c52-8265-4cd2-aac0-3497750bd03b", "id": "13b70c52-8265-4cd2-aac0-3497750bd03b"}, "format": "cow", "href": "/ovirt-engine/api/disks/2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "image_id": "ad50f9c0-1b07-43fb-bea2-9f38d6e22acd", "name": "centos76", "permissions": [], "propagate_errors": false, "provisioned_size": 8589934592, "qcow_version": "qcow2_v2", "quota": {"href": "/ovirt-engine/api/datacenters/e2c375e0-929e-11e9-969e-0013f7d1bb52/quotas/f3f4eefc-929e-11e9-b3a6-0013f7d1bb52", "id": "f3f4eefc-929e-11e9-b3a6-0013f7d1bb52"}, "shareable": false, "sparse": true, "statistics": [], "status": "ok", "storage_domains": [{"href": "/ovirt-engine/api/storagedomains/156168f1-3905-4514-b7c1-817e39718ba6", "id": "156168f1-3905-4514-b7c1-817e39718ba6"}], "storage_type": "image", "total_size": 942409728, "wipe_after_delete": false}, "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13"} De: suporte@logicworks.pt Para: "Jayme" <jaymef@gmail.com> Cc: "users" <users@ovirt.org> Enviadas: Sexta-feira, 15 De Novembro de 2019 10:29:06 Assunto: [ovirt-users] Re: metrics Hello, Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" } I think this is the problem? Any idea? Thanks a lot José De: "Jayme" <jaymef@gmail.com> Para: suporte@logicworks.pt Cc: "users" <users@ovirt.org> Enviadas: Quinta-feira, 14 De Novembro de 2019 18:06:51 Assunto: Re: [ovirt-users] metrics this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2 On Thu, Nov 14, 2019 at 1:38 PM < suporte@logicworks.pt > wrote: Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0 but nothing happens I think I need the URL with openshift upstream I'm a newbie with openshift, can you point me to the right direction? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:15:26 Assunto: Re: [ovirt-users] metrics It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented On Thu, Nov 14, 2019 at 1:06 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok, so how can I get the guest image? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:05:31 Assunto: Re: [ovirt-users] metrics An RH subscription is not needed to install ovirt metrics. On Thu, Nov 14, 2019 at 12:21 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Hi, I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:) Thanks -- Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ... BQ_END BQ_END _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/75HKFNTUOQPETR...
Ok, found this https://github.com/oVirt/ovirt-ansible-image-template/pull/47 and change retries: "{{ (disk_resize_timeout / 3) | int }}" delay: 3 to retries: 60 delay: 3 in /usr/share/ansible/roles/ovirt.image-template/tasks/qcow2_image.yml but now I'm stuck in here: TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************************************* FAILED - RETRYING: Collect oVirt VM facts (5 retries left). FAILED - RETRYING: Collect oVirt VM facts (4 retries left). FAILED - RETRYING: Collect oVirt VM facts (3 retries left). FAILED - RETRYING: Collect oVirt VM facts (2 retries left). FAILED - RETRYING: Collect oVirt VM facts (1 retries left). fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} after the creation of metrics-store-installer VM De: suporte@logicworks.pt Para: "Jayme" <jaymef@gmail.com> Cc: "users" <users@ovirt.org> Enviadas: Sexta-feira, 15 De Novembro de 2019 16:11:25 Assunto: [ovirt-users] Re: metrics Well, I did a mistake when copying the metrics-store-config.yml But now I'm getting this error ...... FAILED - RETRYING: Wait for resize (1 retries left) fatal: [localhost]: FAILED! => {"attempts": 40, "changed": false, "disk": {"actual_size": 942409728, "alias": "centos76", "backup": "none", "content_type": "data", "description": "", "disk_profile": {"href": "/ovirt-engine/api/diskprofiles/13b70c52-8265-4cd2-aac0-3497750bd03b", "id": "13b70c52-8265-4cd2-aac0-3497750bd03b"}, "format": "cow", "href": "/ovirt-engine/api/disks/2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "image_id": "ad50f9c0-1b07-43fb-bea2-9f38d6e22acd", "name": "centos76", "permissions": [], "propagate_errors": false, "provisioned_size": 8589934592, "qcow_version": "qcow2_v2", "quota": {"href": "/ovirt-engine/api/datacenters/e2c375e0-929e-11e9-969e-0013f7d1bb52/quotas/f3f4eefc-929e-11e9-b3a6-0013f7d1bb52", "id": "f3f4eefc-929e-11e9-b3a6-0013f7d1bb52"}, "shareable": false, "sparse": true, "statistics": [], "status": "ok", "storage_domains": [{"href": "/ovirt-engine/api/storagedomains/156168f1-3905-4514-b7c1-817e39718ba6", "id": "156168f1-3905-4514-b7c1-817e39718ba6"}], "storage_type": "image", "total_size": 942409728, "wipe_after_delete": false}, "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13"} De: suporte@logicworks.pt Para: "Jayme" <jaymef@gmail.com> Cc: "users" <users@ovirt.org> Enviadas: Sexta-feira, 15 De Novembro de 2019 10:29:06 Assunto: [ovirt-users] Re: metrics Hello, Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" } I think this is the problem? Any idea? Thanks a lot José De: "Jayme" <jaymef@gmail.com> Para: suporte@logicworks.pt Cc: "users" <users@ovirt.org> Enviadas: Quinta-feira, 14 De Novembro de 2019 18:06:51 Assunto: Re: [ovirt-users] metrics this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2 On Thu, Nov 14, 2019 at 1:38 PM < suporte@logicworks.pt > wrote: Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0 but nothing happens I think I need the URL with openshift upstream I'm a newbie with openshift, can you point me to the right direction? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:15:26 Assunto: Re: [ovirt-users] metrics It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented On Thu, Nov 14, 2019 at 1:06 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok, so how can I get the guest image? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:05:31 Assunto: Re: [ovirt-users] metrics An RH subscription is not needed to install ovirt metrics. On Thu, Nov 14, 2019 at 12:21 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Hi, I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:) Thanks -- Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ... BQ_END BQ_END _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/75HKFNTUOQPETR... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RULG5CORJNCBFE...
-- Shirly Radco BI Principal Software Engineer Red Hat <https://www.redhat.com/> <https://www.redhat.com/> On Fri, Nov 15, 2019 at 7:34 PM <suporte@logicworks.pt> wrote:
Ok, found this https://github.com/oVirt/ovirt-ansible-image-template/pull/47 and change
retries: "{{ (disk_resize_timeout / 3) | int }}" delay: 3
to
retries: 60 delay: 3
in /usr/share/ansible/roles/ovirt.image-template/tasks/qcow2_image.yml
but now I'm stuck in here:
TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************************************* FAILED - RETRYING: Collect oVirt VM facts (5 retries left). FAILED - RETRYING: Collect oVirt VM facts (4 retries left). FAILED - RETRYING: Collect oVirt VM facts (3 retries left). FAILED - RETRYING: Collect oVirt VM facts (2 retries left). FAILED - RETRYING: Collect oVirt VM facts (1 retries left). fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
There is probably something wrong with your engine credentials. You try setting ANSIBLE_DEBUG to true to debug this issue. ANSIBLE_DEBUG ignores np_log so please keep in mind that your password will be readable and you might want to delete the log once you finish.
after the creation of metrics-store-installer VM
------------------------------ *De: *suporte@logicworks.pt *Para: *"Jayme" <jaymef@gmail.com> *Cc: *"users" <users@ovirt.org> *Enviadas: *Sexta-feira, 15 De Novembro de 2019 16:11:25 *Assunto: *[ovirt-users] Re: metrics
Well, I did a mistake when copying the metrics-store-config.yml
But now I'm getting this error ...... FAILED - RETRYING: Wait for resize (1 retries left) fatal: [localhost]: FAILED! => {"attempts": 40, "changed": false, "disk": {"actual_size": 942409728, "alias": "centos76", "backup": "none", "content_type": "data", "description": "", "disk_profile": {"href": "/ovirt-engine/api/diskprofiles/13b70c52-8265-4cd2-aac0-3497750bd03b", "id": "13b70c52-8265-4cd2-aac0-3497750bd03b"}, "format": "cow", "href": "/ovirt-engine/api/disks/2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "image_id": "ad50f9c0-1b07-43fb-bea2-9f38d6e22acd", "name": "centos76", "permissions": [], "propagate_errors": false, "provisioned_size": 8589934592, "qcow_version": "qcow2_v2", "quota": {"href": "/ovirt-engine/api/datacenters/e2c375e0-929e-11e9-969e-0013f7d1bb52/quotas/f3f4eefc-929e-11e9-b3a6-0013f7d1bb52", "id": "f3f4eefc-929e-11e9-b3a6-0013f7d1bb52"}, "shareable": false, "sparse": true, "statistics": [], "status": "ok", "storage_domains": [{"href": "/ovirt-engine/api/storagedomains/156168f1-3905-4514-b7c1-817e39718ba6", "id": "156168f1-3905-4514-b7c1-817e39718ba6"}], "storage_type": "image", "total_size": 942409728, "wipe_after_delete": false}, "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13"}
------------------------------ *De: *suporte@logicworks.pt *Para: *"Jayme" <jaymef@gmail.com> *Cc: *"users" <users@ovirt.org> *Enviadas: *Sexta-feira, 15 De Novembro de 2019 10:29:06 *Assunto: *[ovirt-users] Re: metrics
Hello,
Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass
changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" }
I think this is the problem? Any idea?
Thanks a lot
José
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 18:06:51 *Assunto: *Re: [ovirt-users] metrics
this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2
On Thu, Nov 14, 2019 at 1:38 PM <suporte@logicworks.pt> wrote:
Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0
but nothing happens I think I need the URL with openshift upstream
I'm a newbie with openshift, can you point me to the right direction?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:15:26 *Assunto: *Re: [ovirt-users] metrics
It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented
On Thu, Nov 14, 2019 at 1:06 PM <suporte@logicworks.pt> wrote:
Ok, so how can I get the guest image?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:05:31 *Assunto: *Re: [ovirt-users] metrics
An RH subscription is not needed to install ovirt metrics.
On Thu, Nov 14, 2019 at 12:21 PM <suporte@logicworks.pt> wrote:
Hi,
I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:)
Thanks
-- ------------------------------ Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/75HKFNTUOQPETR...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RULG5CORJNCBFE... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OVTTKZXNYBCUXE...
Hello, I attached the log. Cannot figure it out where is the issue. Any idea? Thanks José De: "Shirly Radco" <sradco@redhat.com> Para: suporte@logicworks.pt Cc: "Jayme" <jaymef@gmail.com>, "users" <users@ovirt.org> Enviadas: Segunda-feira, 18 De Novembro de 2019 10:24:28 Assunto: Re: [ovirt-users] Re: metrics -- Shirly Radco BI Principal Software Engineer Red Hat On Fri, Nov 15, 2019 at 7:34 PM < suporte@logicworks.pt > wrote: Ok, found this https://github.com/oVirt/ovirt-ansible-image-template/pull/47 and change retries: "{{ (disk_resize_timeout / 3) | int }}" delay: 3 to retries: 60 delay: 3 in /usr/share/ansible/roles/ovirt.image-template/tasks/qcow2_image.yml but now I'm stuck in here: TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************************************* FAILED - RETRYING: Collect oVirt VM facts (5 retries left). FAILED - RETRYING: Collect oVirt VM facts (4 retries left). FAILED - RETRYING: Collect oVirt VM facts (3 retries left). FAILED - RETRYING: Collect oVirt VM facts (2 retries left). FAILED - RETRYING: Collect oVirt VM facts (1 retries left). fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} There is probably something wrong with your engine credentials. You try setting ANSIBLE_DEBUG to true to debug this issue. ANSIBLE_DEBUG ignores np_log so please keep in mind that your password will be readable and you might want to delete the log once you finish. BQ_BEGIN after the creation of metrics-store-installer VM De: suporte@logicworks.pt Para: "Jayme" < jaymef@gmail.com > Cc: "users" < users@ovirt.org > Enviadas: Sexta-feira, 15 De Novembro de 2019 16:11:25 Assunto: [ovirt-users] Re: metrics Well, I did a mistake when copying the metrics-store-config.yml But now I'm getting this error ...... FAILED - RETRYING: Wait for resize (1 retries left) fatal: [localhost]: FAILED! => {"attempts": 40, "changed": false, "disk": {"actual_size": 942409728, "alias": "centos76", "backup": "none", "content_type": "data", "description": "", "disk_profile": {"href": "/ovirt-engine/api/diskprofiles/13b70c52-8265-4cd2-aac0-3497750bd03b", "id": "13b70c52-8265-4cd2-aac0-3497750bd03b"}, "format": "cow", "href": "/ovirt-engine/api/disks/2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "image_id": "ad50f9c0-1b07-43fb-bea2-9f38d6e22acd", "name": "centos76", "permissions": [], "propagate_errors": false, "provisioned_size": 8589934592, "qcow_version": "qcow2_v2", "quota": {"href": "/ovirt-engine/api/datacenters/e2c375e0-929e-11e9-969e-0013f7d1bb52/quotas/f3f4eefc-929e-11e9-b3a6-0013f7d1bb52", "id": "f3f4eefc-929e-11e9-b3a6-0013f7d1bb52"}, "shareable": false, "sparse": true, "statistics": [], "status": "ok", "storage_domains": [{"href": "/ovirt-engine/api/storagedomains/156168f1-3905-4514-b7c1-817e39718ba6", "id": "156168f1-3905-4514-b7c1-817e39718ba6"}], "storage_type": "image", "total_size": 942409728, "wipe_after_delete": false}, "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13"} De: suporte@logicworks.pt Para: "Jayme" < jaymef@gmail.com > Cc: "users" < users@ovirt.org > Enviadas: Sexta-feira, 15 De Novembro de 2019 10:29:06 Assunto: [ovirt-users] Re: metrics Hello, Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" } I think this is the problem? Any idea? Thanks a lot José De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 18:06:51 Assunto: Re: [ovirt-users] metrics this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2 On Thu, Nov 14, 2019 at 1:38 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0 but nothing happens I think I need the URL with openshift upstream I'm a newbie with openshift, can you point me to the right direction? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:15:26 Assunto: Re: [ovirt-users] metrics It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented On Thu, Nov 14, 2019 at 1:06 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok, so how can I get the guest image? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:05:31 Assunto: Re: [ovirt-users] metrics An RH subscription is not needed to install ovirt metrics. On Thu, Nov 14, 2019 at 12:21 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Hi, I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:) Thanks -- Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ... BQ_END BQ_END BQ_END _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/75HKFNTUOQPETR... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RULG5CORJNCBFE... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OVTTKZXNYBCUXE... BQ_END
Hi, Did you try running the playbook with the ANSIBLE_DEBUG=1 ? It should show you the issue in the log that is located under /var/log/ovirt-engine/ansible/ . Best, Shirly On Mon, Nov 18, 2019 at 7:56 PM <suporte@logicworks.pt> wrote:
Hello,
I attached the log. Cannot figure it out where is the issue.
Any idea?
Thanks
José
------------------------------ *De: *"Shirly Radco" <sradco@redhat.com> *Para: *suporte@logicworks.pt *Cc: *"Jayme" <jaymef@gmail.com>, "users" <users@ovirt.org> *Enviadas: *Segunda-feira, 18 De Novembro de 2019 10:24:28 *Assunto: *Re: [ovirt-users] Re: metrics
--
Shirly Radco
BI Principal Software Engineer
Red Hat <https://www.redhat.com/>
On Fri, Nov 15, 2019 at 7:34 PM <suporte@logicworks.pt> wrote:
Ok, found this https://github.com/oVirt/ovirt-ansible-image-template/pull/47 and change
retries: "{{ (disk_resize_timeout / 3) | int }}" delay: 3
to
retries: 60 delay: 3
in /usr/share/ansible/roles/ovirt.image-template/tasks/qcow2_image.yml
but now I'm stuck in here:
TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************************************* FAILED - RETRYING: Collect oVirt VM facts (5 retries left). FAILED - RETRYING: Collect oVirt VM facts (4 retries left). FAILED - RETRYING: Collect oVirt VM facts (3 retries left). FAILED - RETRYING: Collect oVirt VM facts (2 retries left). FAILED - RETRYING: Collect oVirt VM facts (1 retries left). fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
There is probably something wrong with your engine credentials. You try setting ANSIBLE_DEBUG to true to debug this issue. ANSIBLE_DEBUG ignores np_log so please keep in mind that your password will be readable and you might want to delete the log once you finish.
after the creation of metrics-store-installer VM
------------------------------ *De: *suporte@logicworks.pt *Para: *"Jayme" <jaymef@gmail.com> *Cc: *"users" <users@ovirt.org> *Enviadas: *Sexta-feira, 15 De Novembro de 2019 16:11:25 *Assunto: *[ovirt-users] Re: metrics
Well, I did a mistake when copying the metrics-store-config.yml
But now I'm getting this error ...... FAILED - RETRYING: Wait for resize (1 retries left) fatal: [localhost]: FAILED! => {"attempts": 40, "changed": false, "disk": {"actual_size": 942409728, "alias": "centos76", "backup": "none", "content_type": "data", "description": "", "disk_profile": {"href": "/ovirt-engine/api/diskprofiles/13b70c52-8265-4cd2-aac0-3497750bd03b", "id": "13b70c52-8265-4cd2-aac0-3497750bd03b"}, "format": "cow", "href": "/ovirt-engine/api/disks/2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "image_id": "ad50f9c0-1b07-43fb-bea2-9f38d6e22acd", "name": "centos76", "permissions": [], "propagate_errors": false, "provisioned_size": 8589934592, "qcow_version": "qcow2_v2", "quota": {"href": "/ovirt-engine/api/datacenters/e2c375e0-929e-11e9-969e-0013f7d1bb52/quotas/f3f4eefc-929e-11e9-b3a6-0013f7d1bb52", "id": "f3f4eefc-929e-11e9-b3a6-0013f7d1bb52"}, "shareable": false, "sparse": true, "statistics": [], "status": "ok", "storage_domains": [{"href": "/ovirt-engine/api/storagedomains/156168f1-3905-4514-b7c1-817e39718ba6", "id": "156168f1-3905-4514-b7c1-817e39718ba6"}], "storage_type": "image", "total_size": 942409728, "wipe_after_delete": false}, "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13"}
------------------------------ *De: *suporte@logicworks.pt *Para: *"Jayme" <jaymef@gmail.com> *Cc: *"users" <users@ovirt.org> *Enviadas: *Sexta-feira, 15 De Novembro de 2019 10:29:06 *Assunto: *[ovirt-users] Re: metrics
Hello,
Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass
changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" }
I think this is the problem? Any idea?
Thanks a lot
José
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 18:06:51 *Assunto: *Re: [ovirt-users] metrics
this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2
On Thu, Nov 14, 2019 at 1:38 PM <suporte@logicworks.pt> wrote:
Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0
but nothing happens I think I need the URL with openshift upstream
I'm a newbie with openshift, can you point me to the right direction?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:15:26 *Assunto: *Re: [ovirt-users] metrics
It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented
On Thu, Nov 14, 2019 at 1:06 PM <suporte@logicworks.pt> wrote:
Ok, so how can I get the guest image?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:05:31 *Assunto: *Re: [ovirt-users] metrics
An RH subscription is not needed to install ovirt metrics.
On Thu, Nov 14, 2019 at 12:21 PM <suporte@logicworks.pt> wrote:
Hi,
I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:)
Thanks
-- ------------------------------ Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/75HKFNTUOQPETR...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RULG5CORJNCBFE... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OVTTKZXNYBCUXE...
Hello, Still cannot find it. # echo $ANSIBLE_DEBUG 1 I just find this: 2019-11-19 16:25:50,264 p=root u=6462 | ok: [localhost] 2019-11-19 16:25:50,296 p=root u=6462 | TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************ 2019-11-19 16:30:54,647 p=root u=6462 | fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} 2019-11-19 16:30:54,679 p=root u=6462 | TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Logout from oVirt] ***************************************************************** 2019-11-19 16:30:55,074 p=root u=6462 | ok: [localhost] 2019-11-19 16:30:55,107 p=root u=6462 | TASK [oVirt.metrics/roles/oVirt.metrics-store-installation : Delete engine_id_rsa.pub] ************************************************************************ Maybe I'm missing something? De: "Shirly Radco" <sradco@redhat.com> Para: suporte@logicworks.pt Cc: "Jayme" <jaymef@gmail.com>, "users" <users@ovirt.org> Enviadas: Terça-feira, 19 De Novembro de 2019 14:01:20 Assunto: Re: [ovirt-users] Re: metrics Hi, Did you try running the playbook with the ANSIBLE_DEBUG=1 ? It should show you the issue in the log that is located under /var/log/ovirt-engine/ansible/ . Best, Shirly On Mon, Nov 18, 2019 at 7:56 PM < suporte@logicworks.pt > wrote: Hello, I attached the log. Cannot figure it out where is the issue. Any idea? Thanks José De: "Shirly Radco" < sradco@redhat.com > Para: suporte@logicworks.pt Cc: "Jayme" < jaymef@gmail.com >, "users" < users@ovirt.org > Enviadas: Segunda-feira, 18 De Novembro de 2019 10:24:28 Assunto: Re: [ovirt-users] Re: metrics -- Shirly Radco BI Principal Software Engineer Red Hat On Fri, Nov 15, 2019 at 7:34 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok, found this https://github.com/oVirt/ovirt-ansible-image-template/pull/47 and change retries: "{{ (disk_resize_timeout / 3) | int }}" delay: 3 to retries: 60 delay: 3 in /usr/share/ansible/roles/ovirt.image-template/tasks/qcow2_image.yml but now I'm stuck in here: TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************************************* FAILED - RETRYING: Collect oVirt VM facts (5 retries left). FAILED - RETRYING: Collect oVirt VM facts (4 retries left). FAILED - RETRYING: Collect oVirt VM facts (3 retries left). FAILED - RETRYING: Collect oVirt VM facts (2 retries left). FAILED - RETRYING: Collect oVirt VM facts (1 retries left). fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} There is probably something wrong with your engine credentials. You try setting ANSIBLE_DEBUG to true to debug this issue. ANSIBLE_DEBUG ignores np_log so please keep in mind that your password will be readable and you might want to delete the log once you finish. BQ_BEGIN after the creation of metrics-store-installer VM De: suporte@logicworks.pt Para: "Jayme" < jaymef@gmail.com > Cc: "users" < users@ovirt.org > Enviadas: Sexta-feira, 15 De Novembro de 2019 16:11:25 Assunto: [ovirt-users] Re: metrics Well, I did a mistake when copying the metrics-store-config.yml But now I'm getting this error ...... FAILED - RETRYING: Wait for resize (1 retries left) fatal: [localhost]: FAILED! => {"attempts": 40, "changed": false, "disk": {"actual_size": 942409728, "alias": "centos76", "backup": "none", "content_type": "data", "description": "", "disk_profile": {"href": "/ovirt-engine/api/diskprofiles/13b70c52-8265-4cd2-aac0-3497750bd03b", "id": "13b70c52-8265-4cd2-aac0-3497750bd03b"}, "format": "cow", "href": "/ovirt-engine/api/disks/2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "image_id": "ad50f9c0-1b07-43fb-bea2-9f38d6e22acd", "name": "centos76", "permissions": [], "propagate_errors": false, "provisioned_size": 8589934592, "qcow_version": "qcow2_v2", "quota": {"href": "/ovirt-engine/api/datacenters/e2c375e0-929e-11e9-969e-0013f7d1bb52/quotas/f3f4eefc-929e-11e9-b3a6-0013f7d1bb52", "id": "f3f4eefc-929e-11e9-b3a6-0013f7d1bb52"}, "shareable": false, "sparse": true, "statistics": [], "status": "ok", "storage_domains": [{"href": "/ovirt-engine/api/storagedomains/156168f1-3905-4514-b7c1-817e39718ba6", "id": "156168f1-3905-4514-b7c1-817e39718ba6"}], "storage_type": "image", "total_size": 942409728, "wipe_after_delete": false}, "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13"} De: suporte@logicworks.pt Para: "Jayme" < jaymef@gmail.com > Cc: "users" < users@ovirt.org > Enviadas: Sexta-feira, 15 De Novembro de 2019 10:29:06 Assunto: [ovirt-users] Re: metrics Hello, Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" } I think this is the problem? Any idea? Thanks a lot José De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 18:06:51 Assunto: Re: [ovirt-users] metrics this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2 On Thu, Nov 14, 2019 at 1:38 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0 but nothing happens I think I need the URL with openshift upstream I'm a newbie with openshift, can you point me to the right direction? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:15:26 Assunto: Re: [ovirt-users] metrics It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented On Thu, Nov 14, 2019 at 1:06 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok, so how can I get the guest image? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:05:31 Assunto: Re: [ovirt-users] metrics An RH subscription is not needed to install ovirt metrics. On Thu, Nov 14, 2019 at 12:21 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Hi, I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:) Thanks -- Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ... BQ_END BQ_END BQ_END _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/75HKFNTUOQPETR... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RULG5CORJNCBFE... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OVTTKZXNYBCUXE... BQ_END BQ_END
Hi, I overcame this problem after configuring an hostname on metrics-store-installer, add a static IP and add this host to /etc/hosts on the engine. De: suporte@logicworks.pt Para: "Shirly Radco" <sradco@redhat.com> Cc: "users" <users@ovirt.org> Enviadas: Terça-feira, 19 De Novembro de 2019 17:08:10 Assunto: [ovirt-users] Re: metrics Hello, Still cannot find it. # echo $ANSIBLE_DEBUG 1 I just find this: 2019-11-19 16:25:50,264 p=root u=6462 | ok: [localhost] 2019-11-19 16:25:50,296 p=root u=6462 | TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************ 2019-11-19 16:30:54,647 p=root u=6462 | fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} 2019-11-19 16:30:54,679 p=root u=6462 | TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Logout from oVirt] ***************************************************************** 2019-11-19 16:30:55,074 p=root u=6462 | ok: [localhost] 2019-11-19 16:30:55,107 p=root u=6462 | TASK [oVirt.metrics/roles/oVirt.metrics-store-installation : Delete engine_id_rsa.pub] ************************************************************************ Maybe I'm missing something? De: "Shirly Radco" <sradco@redhat.com> Para: suporte@logicworks.pt Cc: "Jayme" <jaymef@gmail.com>, "users" <users@ovirt.org> Enviadas: Terça-feira, 19 De Novembro de 2019 14:01:20 Assunto: Re: [ovirt-users] Re: metrics Hi, Did you try running the playbook with the ANSIBLE_DEBUG=1 ? It should show you the issue in the log that is located under /var/log/ovirt-engine/ansible/ . Best, Shirly On Mon, Nov 18, 2019 at 7:56 PM < suporte@logicworks.pt > wrote: Hello, I attached the log. Cannot figure it out where is the issue. Any idea? Thanks José De: "Shirly Radco" < sradco@redhat.com > Para: suporte@logicworks.pt Cc: "Jayme" < jaymef@gmail.com >, "users" < users@ovirt.org > Enviadas: Segunda-feira, 18 De Novembro de 2019 10:24:28 Assunto: Re: [ovirt-users] Re: metrics -- Shirly Radco BI Principal Software Engineer Red Hat On Fri, Nov 15, 2019 at 7:34 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok, found this https://github.com/oVirt/ovirt-ansible-image-template/pull/47 and change retries: "{{ (disk_resize_timeout / 3) | int }}" delay: 3 to retries: 60 delay: 3 in /usr/share/ansible/roles/ovirt.image-template/tasks/qcow2_image.yml but now I'm stuck in here: TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************************************* FAILED - RETRYING: Collect oVirt VM facts (5 retries left). FAILED - RETRYING: Collect oVirt VM facts (4 retries left). FAILED - RETRYING: Collect oVirt VM facts (3 retries left). FAILED - RETRYING: Collect oVirt VM facts (2 retries left). FAILED - RETRYING: Collect oVirt VM facts (1 retries left). fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} There is probably something wrong with your engine credentials. You try setting ANSIBLE_DEBUG to true to debug this issue. ANSIBLE_DEBUG ignores np_log so please keep in mind that your password will be readable and you might want to delete the log once you finish. BQ_BEGIN after the creation of metrics-store-installer VM De: suporte@logicworks.pt Para: "Jayme" < jaymef@gmail.com > Cc: "users" < users@ovirt.org > Enviadas: Sexta-feira, 15 De Novembro de 2019 16:11:25 Assunto: [ovirt-users] Re: metrics Well, I did a mistake when copying the metrics-store-config.yml But now I'm getting this error ...... FAILED - RETRYING: Wait for resize (1 retries left) fatal: [localhost]: FAILED! => {"attempts": 40, "changed": false, "disk": {"actual_size": 942409728, "alias": "centos76", "backup": "none", "content_type": "data", "description": "", "disk_profile": {"href": "/ovirt-engine/api/diskprofiles/13b70c52-8265-4cd2-aac0-3497750bd03b", "id": "13b70c52-8265-4cd2-aac0-3497750bd03b"}, "format": "cow", "href": "/ovirt-engine/api/disks/2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "image_id": "ad50f9c0-1b07-43fb-bea2-9f38d6e22acd", "name": "centos76", "permissions": [], "propagate_errors": false, "provisioned_size": 8589934592, "qcow_version": "qcow2_v2", "quota": {"href": "/ovirt-engine/api/datacenters/e2c375e0-929e-11e9-969e-0013f7d1bb52/quotas/f3f4eefc-929e-11e9-b3a6-0013f7d1bb52", "id": "f3f4eefc-929e-11e9-b3a6-0013f7d1bb52"}, "shareable": false, "sparse": true, "statistics": [], "status": "ok", "storage_domains": [{"href": "/ovirt-engine/api/storagedomains/156168f1-3905-4514-b7c1-817e39718ba6", "id": "156168f1-3905-4514-b7c1-817e39718ba6"}], "storage_type": "image", "total_size": 942409728, "wipe_after_delete": false}, "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13"} De: suporte@logicworks.pt Para: "Jayme" < jaymef@gmail.com > Cc: "users" < users@ovirt.org > Enviadas: Sexta-feira, 15 De Novembro de 2019 10:29:06 Assunto: [ovirt-users] Re: metrics Hello, Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" } I think this is the problem? Any idea? Thanks a lot José De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 18:06:51 Assunto: Re: [ovirt-users] metrics this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2 On Thu, Nov 14, 2019 at 1:38 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0 but nothing happens I think I need the URL with openshift upstream I'm a newbie with openshift, can you point me to the right direction? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:15:26 Assunto: Re: [ovirt-users] metrics It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented On Thu, Nov 14, 2019 at 1:06 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok, so how can I get the guest image? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:05:31 Assunto: Re: [ovirt-users] metrics An RH subscription is not needed to install ovirt metrics. On Thu, Nov 14, 2019 at 12:21 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Hi, I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:) Thanks -- Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ... BQ_END BQ_END BQ_END _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/75HKFNTUOQPETR... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RULG5CORJNCBFE... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OVTTKZXNYBCUXE... BQ_END BQ_END _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VQZNAAUZYZDX4U...
On Wed, Nov 20, 2019 at 5:46 PM <suporte@logicworks.pt> wrote:
Hi,
I overcame this problem after configuring an hostname on metrics-store-installer, add a static IP and add this host to /etc/hosts on the engine.
I'm happy to hear that! Please note that adding the hot to /etc/hosts can be done by setting the "create_host_entry" to true in the metrics-store-config.yml Best, Shirly
------------------------------ *De: *suporte@logicworks.pt *Para: *"Shirly Radco" <sradco@redhat.com> *Cc: *"users" <users@ovirt.org> *Enviadas: *Terça-feira, 19 De Novembro de 2019 17:08:10 *Assunto: *[ovirt-users] Re: metrics
Hello,
Still cannot find it.
# echo $ANSIBLE_DEBUG 1
I just find this:
2019-11-19 16:25:50,264 p=root u=6462 | ok: [localhost] 2019-11-19 16:25:50,296 p=root u=6462 | TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************ 2019-11-19 16:30:54,647 p=root u=6462 | fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} 2019-11-19 16:30:54,679 p=root u=6462 | TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Logout from oVirt] ***************************************************************** 2019-11-19 16:30:55,074 p=root u=6462 | ok: [localhost] 2019-11-19 16:30:55,107 p=root u=6462 | TASK [oVirt.metrics/roles/oVirt.metrics-store-installation : Delete engine_id_rsa.pub] ************************************************************************
Maybe I'm missing something?
------------------------------ *De: *"Shirly Radco" <sradco@redhat.com> *Para: *suporte@logicworks.pt *Cc: *"Jayme" <jaymef@gmail.com>, "users" <users@ovirt.org> *Enviadas: *Terça-feira, 19 De Novembro de 2019 14:01:20 *Assunto: *Re: [ovirt-users] Re: metrics
Hi,
Did you try running the playbook with the ANSIBLE_DEBUG=1 ? It should show you the issue in the log that is located under /var/log/ovirt-engine/ansible/ .
Best,
Shirly
On Mon, Nov 18, 2019 at 7:56 PM <suporte@logicworks.pt> wrote:
Hello,
I attached the log. Cannot figure it out where is the issue.
Any idea?
Thanks
José
------------------------------ *De: *"Shirly Radco" <sradco@redhat.com> *Para: *suporte@logicworks.pt *Cc: *"Jayme" <jaymef@gmail.com>, "users" <users@ovirt.org> *Enviadas: *Segunda-feira, 18 De Novembro de 2019 10:24:28 *Assunto: *Re: [ovirt-users] Re: metrics
--
Shirly Radco
BI Principal Software Engineer
Red Hat <https://www.redhat.com/>
On Fri, Nov 15, 2019 at 7:34 PM <suporte@logicworks.pt> wrote:
Ok, found this https://github.com/oVirt/ovirt-ansible-image-template/pull/47 and change
retries: "{{ (disk_resize_timeout / 3) | int }}" delay: 3
to
retries: 60 delay: 3
in /usr/share/ansible/roles/ovirt.image-template/tasks/qcow2_image.yml
but now I'm stuck in here:
TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************************************* FAILED - RETRYING: Collect oVirt VM facts (5 retries left). FAILED - RETRYING: Collect oVirt VM facts (4 retries left). FAILED - RETRYING: Collect oVirt VM facts (3 retries left). FAILED - RETRYING: Collect oVirt VM facts (2 retries left). FAILED - RETRYING: Collect oVirt VM facts (1 retries left). fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
There is probably something wrong with your engine credentials. You try setting ANSIBLE_DEBUG to true to debug this issue. ANSIBLE_DEBUG ignores np_log so please keep in mind that your password will be readable and you might want to delete the log once you finish.
after the creation of metrics-store-installer VM
------------------------------ *De: *suporte@logicworks.pt *Para: *"Jayme" <jaymef@gmail.com> *Cc: *"users" <users@ovirt.org> *Enviadas: *Sexta-feira, 15 De Novembro de 2019 16:11:25 *Assunto: *[ovirt-users] Re: metrics
Well, I did a mistake when copying the metrics-store-config.yml
But now I'm getting this error ...... FAILED - RETRYING: Wait for resize (1 retries left) fatal: [localhost]: FAILED! => {"attempts": 40, "changed": false, "disk": {"actual_size": 942409728, "alias": "centos76", "backup": "none", "content_type": "data", "description": "", "disk_profile": {"href": "/ovirt-engine/api/diskprofiles/13b70c52-8265-4cd2-aac0-3497750bd03b", "id": "13b70c52-8265-4cd2-aac0-3497750bd03b"}, "format": "cow", "href": "/ovirt-engine/api/disks/2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "image_id": "ad50f9c0-1b07-43fb-bea2-9f38d6e22acd", "name": "centos76", "permissions": [], "propagate_errors": false, "provisioned_size": 8589934592, "qcow_version": "qcow2_v2", "quota": {"href": "/ovirt-engine/api/datacenters/e2c375e0-929e-11e9-969e-0013f7d1bb52/quotas/f3f4eefc-929e-11e9-b3a6-0013f7d1bb52", "id": "f3f4eefc-929e-11e9-b3a6-0013f7d1bb52"}, "shareable": false, "sparse": true, "statistics": [], "status": "ok", "storage_domains": [{"href": "/ovirt-engine/api/storagedomains/156168f1-3905-4514-b7c1-817e39718ba6", "id": "156168f1-3905-4514-b7c1-817e39718ba6"}], "storage_type": "image", "total_size": 942409728, "wipe_after_delete": false}, "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13"}
------------------------------ *De: *suporte@logicworks.pt *Para: *"Jayme" <jaymef@gmail.com> *Cc: *"users" <users@ovirt.org> *Enviadas: *Sexta-feira, 15 De Novembro de 2019 10:29:06 *Assunto: *[ovirt-users] Re: metrics
Hello,
Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass
changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" }
I think this is the problem? Any idea?
Thanks a lot
José
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 18:06:51 *Assunto: *Re: [ovirt-users] metrics
this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2
On Thu, Nov 14, 2019 at 1:38 PM <suporte@logicworks.pt> wrote:
Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0
but nothing happens I think I need the URL with openshift upstream
I'm a newbie with openshift, can you point me to the right direction?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:15:26 *Assunto: *Re: [ovirt-users] metrics
It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented
On Thu, Nov 14, 2019 at 1:06 PM <suporte@logicworks.pt> wrote:
Ok, so how can I get the guest image?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:05:31 *Assunto: *Re: [ovirt-users] metrics
An RH subscription is not needed to install ovirt metrics.
On Thu, Nov 14, 2019 at 12:21 PM <suporte@logicworks.pt> wrote:
Hi,
I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:)
Thanks
-- ------------------------------ Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/75HKFNTUOQPETR...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RULG5CORJNCBFE... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OVTTKZXNYBCUXE...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VQZNAAUZYZDX4U...
Hi, Now, when running this command # ANSIBLE_CONFIG="/usr/share/ansible/openshift-ansible/ansible.cfg" ANSIBLE_ROLES_PATH="/usr/share/ansible/roles/:/usr/share/ansible/openshift-ansible/roles" ansible-playbook -i integ.ini install_okd.yaml -e @vars.yaml -e @secure_vars.yaml --ask-vault-pass I'm getting this error: failed: [master0.domain.pt] (item=api) => {"attempts": 72, "changed": false, "item": "api", "msg": {"cmd": "/usr/bin/oc get pod master-api-master0.domain.pt -o json -n kube-system", "results": [{}], "returncode": 1, "stderr": "Unable to connect to the server: dial tcp: lookup openshift-master.domain.pt on 192.168.5.77:53: no such host\n", "stdout": ""}} Why it is trying to connect to port 53(!?) on master0? That service is not running on master0. I can ping and telnet telnet 192.168.5.77 8443 Thanks De: "Shirly Radco" <sradco@redhat.com> Para: suporte@logicworks.pt Cc: "users" <users@ovirt.org> Enviadas: Quinta-feira, 21 De Novembro de 2019 10:08:40 Assunto: Re: [ovirt-users] Re: metrics On Wed, Nov 20, 2019 at 5:46 PM < suporte@logicworks.pt > wrote: Hi, I overcame this problem after configuring an hostname on metrics-store-installer, add a static IP and add this host to /etc/hosts on the engine. I'm happy to hear that! Please note that adding the hot to /etc/hosts can be done by setting the "create_host_entry" to true in the metrics-store-config.yml Best, Shirly BQ_BEGIN De: suporte@logicworks.pt Para: "Shirly Radco" < sradco@redhat.com > Cc: "users" < users@ovirt.org > Enviadas: Terça-feira, 19 De Novembro de 2019 17:08:10 Assunto: [ovirt-users] Re: metrics Hello, Still cannot find it. # echo $ANSIBLE_DEBUG 1 I just find this: 2019-11-19 16:25:50,264 p=root u=6462 | ok: [localhost] 2019-11-19 16:25:50,296 p=root u=6462 | TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************ 2019-11-19 16:30:54,647 p=root u=6462 | fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} 2019-11-19 16:30:54,679 p=root u=6462 | TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Logout from oVirt] ***************************************************************** 2019-11-19 16:30:55,074 p=root u=6462 | ok: [localhost] 2019-11-19 16:30:55,107 p=root u=6462 | TASK [oVirt.metrics/roles/oVirt.metrics-store-installation : Delete engine_id_rsa.pub] ************************************************************************ Maybe I'm missing something? De: "Shirly Radco" < sradco@redhat.com > Para: suporte@logicworks.pt Cc: "Jayme" < jaymef@gmail.com >, "users" < users@ovirt.org > Enviadas: Terça-feira, 19 De Novembro de 2019 14:01:20 Assunto: Re: [ovirt-users] Re: metrics Hi, Did you try running the playbook with the ANSIBLE_DEBUG=1 ? It should show you the issue in the log that is located under /var/log/ovirt-engine/ansible/ . Best, Shirly On Mon, Nov 18, 2019 at 7:56 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Hello, I attached the log. Cannot figure it out where is the issue. Any idea? Thanks José De: "Shirly Radco" < sradco@redhat.com > Para: suporte@logicworks.pt Cc: "Jayme" < jaymef@gmail.com >, "users" < users@ovirt.org > Enviadas: Segunda-feira, 18 De Novembro de 2019 10:24:28 Assunto: Re: [ovirt-users] Re: metrics -- Shirly Radco BI Principal Software Engineer Red Hat On Fri, Nov 15, 2019 at 7:34 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok, found this https://github.com/oVirt/ovirt-ansible-image-template/pull/47 and change retries: "{{ (disk_resize_timeout / 3) | int }}" delay: 3 to retries: 60 delay: 3 in /usr/share/ansible/roles/ovirt.image-template/tasks/qcow2_image.yml but now I'm stuck in here: TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************************************* FAILED - RETRYING: Collect oVirt VM facts (5 retries left). FAILED - RETRYING: Collect oVirt VM facts (4 retries left). FAILED - RETRYING: Collect oVirt VM facts (3 retries left). FAILED - RETRYING: Collect oVirt VM facts (2 retries left). FAILED - RETRYING: Collect oVirt VM facts (1 retries left). fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} BQ_END There is probably something wrong with your engine credentials. You try setting ANSIBLE_DEBUG to true to debug this issue. ANSIBLE_DEBUG ignores np_log so please keep in mind that your password will be readable and you might want to delete the log once you finish. BQ_BEGIN after the creation of metrics-store-installer VM De: suporte@logicworks.pt Para: "Jayme" < jaymef@gmail.com > Cc: "users" < users@ovirt.org > Enviadas: Sexta-feira, 15 De Novembro de 2019 16:11:25 Assunto: [ovirt-users] Re: metrics Well, I did a mistake when copying the metrics-store-config.yml But now I'm getting this error ...... FAILED - RETRYING: Wait for resize (1 retries left) fatal: [localhost]: FAILED! => {"attempts": 40, "changed": false, "disk": {"actual_size": 942409728, "alias": "centos76", "backup": "none", "content_type": "data", "description": "", "disk_profile": {"href": "/ovirt-engine/api/diskprofiles/13b70c52-8265-4cd2-aac0-3497750bd03b", "id": "13b70c52-8265-4cd2-aac0-3497750bd03b"}, "format": "cow", "href": "/ovirt-engine/api/disks/2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "image_id": "ad50f9c0-1b07-43fb-bea2-9f38d6e22acd", "name": "centos76", "permissions": [], "propagate_errors": false, "provisioned_size": 8589934592, "qcow_version": "qcow2_v2", "quota": {"href": "/ovirt-engine/api/datacenters/e2c375e0-929e-11e9-969e-0013f7d1bb52/quotas/f3f4eefc-929e-11e9-b3a6-0013f7d1bb52", "id": "f3f4eefc-929e-11e9-b3a6-0013f7d1bb52"}, "shareable": false, "sparse": true, "statistics": [], "status": "ok", "storage_domains": [{"href": "/ovirt-engine/api/storagedomains/156168f1-3905-4514-b7c1-817e39718ba6", "id": "156168f1-3905-4514-b7c1-817e39718ba6"}], "storage_type": "image", "total_size": 942409728, "wipe_after_delete": false}, "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13"} De: suporte@logicworks.pt Para: "Jayme" < jaymef@gmail.com > Cc: "users" < users@ovirt.org > Enviadas: Sexta-feira, 15 De Novembro de 2019 10:29:06 Assunto: [ovirt-users] Re: metrics Hello, Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" } I think this is the problem? Any idea? Thanks a lot José De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 18:06:51 Assunto: Re: [ovirt-users] metrics this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2 On Thu, Nov 14, 2019 at 1:38 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0 but nothing happens I think I need the URL with openshift upstream I'm a newbie with openshift, can you point me to the right direction? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:15:26 Assunto: Re: [ovirt-users] metrics It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented On Thu, Nov 14, 2019 at 1:06 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Ok, so how can I get the guest image? Thanks De: "Jayme" < jaymef@gmail.com > Para: suporte@logicworks.pt Cc: "users" < users@ovirt.org > Enviadas: Quinta-feira, 14 De Novembro de 2019 17:05:31 Assunto: Re: [ovirt-users] metrics An RH subscription is not needed to install ovirt metrics. On Thu, Nov 14, 2019 at 12:21 PM < suporte@logicworks.pt > wrote: BQ_BEGIN Hi, I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:) Thanks -- Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ... BQ_END BQ_END BQ_END _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/75HKFNTUOQPETR... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RULG5CORJNCBFE... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OVTTKZXNYBCUXE... BQ_END BQ_END _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VQZNAAUZYZDX4U... BQ_END
On Fri, 22 Nov 2019 at 19:07, <suporte@logicworks.pt> wrote:
Hi,
Now, when running this command # ANSIBLE_CONFIG="/usr/share/ansible/openshift-ansible/ansible.cfg" ANSIBLE_ROLES_PATH="/usr/share/ansible/roles/:/usr/share/ansible/openshift-ansible/roles" ansible-playbook -i integ.ini install_okd.yaml -e @vars.yaml -e @secure_vars.yaml --ask-vault-pass
I'm getting this error:
failed: [master0.domain.pt] (item=api) => {"attempts": 72, "changed": false, "item": "api", "msg": {"cmd": "/usr/bin/oc get pod master-api-master0.domain.pt -o json -n kube-system", "results": [{}], "returncode": 1, "stderr": "Unable to connect to the server: dial tcp: lookup openshift-master.domain.pt on 192.168.5.77:53: no such host\n", "stdout": ""}}
its the machine resolver nameserver 192.168.5.77 that replied that it can't resolve openshift-master-domain.pt.
Why it is trying to connect to port 53(!?) on master0? That service is not
running on master0. I can ping and telnet telnet 192.168.5.77 8443
Thanks
------------------------------ *De: *"Shirly Radco" <sradco@redhat.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 21 De Novembro de 2019 10:08:40 *Assunto: *Re: [ovirt-users] Re: metrics
On Wed, Nov 20, 2019 at 5:46 PM <suporte@logicworks.pt> wrote:
Hi,
I overcame this problem after configuring an hostname on metrics-store-installer, add a static IP and add this host to /etc/hosts on the engine.
I'm happy to hear that! Please note that adding the hot to /etc/hosts can be done by setting the "create_host_entry" to true in the metrics-store-config.yml
Best, Shirly
------------------------------ *De: *suporte@logicworks.pt *Para: *"Shirly Radco" <sradco@redhat.com> *Cc: *"users" <users@ovirt.org> *Enviadas: *Terça-feira, 19 De Novembro de 2019 17:08:10 *Assunto: *[ovirt-users] Re: metrics
Hello,
Still cannot find it.
# echo $ANSIBLE_DEBUG 1
I just find this:
2019-11-19 16:25:50,264 p=root u=6462 | ok: [localhost] 2019-11-19 16:25:50,296 p=root u=6462 | TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************ 2019-11-19 16:30:54,647 p=root u=6462 | fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false} 2019-11-19 16:30:54,679 p=root u=6462 | TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Logout from oVirt] ***************************************************************** 2019-11-19 16:30:55,074 p=root u=6462 | ok: [localhost] 2019-11-19 16:30:55,107 p=root u=6462 | TASK [oVirt.metrics/roles/oVirt.metrics-store-installation : Delete engine_id_rsa.pub] ************************************************************************
Maybe I'm missing something?
------------------------------ *De: *"Shirly Radco" <sradco@redhat.com> *Para: *suporte@logicworks.pt *Cc: *"Jayme" <jaymef@gmail.com>, "users" <users@ovirt.org> *Enviadas: *Terça-feira, 19 De Novembro de 2019 14:01:20 *Assunto: *Re: [ovirt-users] Re: metrics
Hi,
Did you try running the playbook with the ANSIBLE_DEBUG=1 ? It should show you the issue in the log that is located under /var/log/ovirt-engine/ansible/ .
Best,
Shirly
On Mon, Nov 18, 2019 at 7:56 PM <suporte@logicworks.pt> wrote:
Hello,
I attached the log. Cannot figure it out where is the issue.
Any idea?
Thanks
José
------------------------------ *De: *"Shirly Radco" <sradco@redhat.com> *Para: *suporte@logicworks.pt *Cc: *"Jayme" <jaymef@gmail.com>, "users" <users@ovirt.org> *Enviadas: *Segunda-feira, 18 De Novembro de 2019 10:24:28 *Assunto: *Re: [ovirt-users] Re: metrics
--
Shirly Radco
BI Principal Software Engineer
Red Hat <https://www.redhat.com/>
On Fri, Nov 15, 2019 at 7:34 PM <suporte@logicworks.pt> wrote:
Ok, found this https://github.com/oVirt/ovirt-ansible-image-template/pull/47 and change
retries: "{{ (disk_resize_timeout / 3) | int }}" delay: 3
to
retries: 60 delay: 3
in /usr/share/ansible/roles/ovirt.image-template/tasks/qcow2_image.yml
but now I'm stuck in here:
TASK [/usr/share/ansible/roles/oVirt.metrics/roles/oVirt.origin-on-ovirt : Collect oVirt VM facts] ************************************************************************************* FAILED - RETRYING: Collect oVirt VM facts (5 retries left). FAILED - RETRYING: Collect oVirt VM facts (4 retries left). FAILED - RETRYING: Collect oVirt VM facts (3 retries left). FAILED - RETRYING: Collect oVirt VM facts (2 retries left). FAILED - RETRYING: Collect oVirt VM facts (1 retries left). fatal: [localhost]: FAILED! => {"attempts": 5, "censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result", "changed": false}
There is probably something wrong with your engine credentials. You try setting ANSIBLE_DEBUG to true to debug this issue. ANSIBLE_DEBUG ignores np_log so please keep in mind that your password will be readable and you might want to delete the log once you finish.
after the creation of metrics-store-installer VM
------------------------------ *De: *suporte@logicworks.pt *Para: *"Jayme" <jaymef@gmail.com> *Cc: *"users" <users@ovirt.org> *Enviadas: *Sexta-feira, 15 De Novembro de 2019 16:11:25 *Assunto: *[ovirt-users] Re: metrics
Well, I did a mistake when copying the metrics-store-config.yml
But now I'm getting this error ...... FAILED - RETRYING: Wait for resize (1 retries left) fatal: [localhost]: FAILED! => {"attempts": 40, "changed": false, "disk": {"actual_size": 942409728, "alias": "centos76", "backup": "none", "content_type": "data", "description": "", "disk_profile": {"href": "/ovirt-engine/api/diskprofiles/13b70c52-8265-4cd2-aac0-3497750bd03b", "id": "13b70c52-8265-4cd2-aac0-3497750bd03b"}, "format": "cow", "href": "/ovirt-engine/api/disks/2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13", "image_id": "ad50f9c0-1b07-43fb-bea2-9f38d6e22acd", "name": "centos76", "permissions": [], "propagate_errors": false, "provisioned_size": 8589934592, "qcow_version": "qcow2_v2", "quota": {"href": "/ovirt-engine/api/datacenters/e2c375e0-929e-11e9-969e-0013f7d1bb52/quotas/f3f4eefc-929e-11e9-b3a6-0013f7d1bb52", "id": "f3f4eefc-929e-11e9-b3a6-0013f7d1bb52"}, "shareable": false, "sparse": true, "statistics": [], "status": "ok", "storage_domains": [{"href": "/ovirt-engine/api/storagedomains/156168f1-3905-4514-b7c1-817e39718ba6", "id": "156168f1-3905-4514-b7c1-817e39718ba6"}], "storage_type": "image", "total_size": 942409728, "wipe_after_delete": false}, "id": "2abbe5f5-7534-4d6e-bd91-9ce1c135de13"}
------------------------------ *De: *suporte@logicworks.pt *Para: *"Jayme" <jaymef@gmail.com> *Cc: *"users" <users@ovirt.org> *Enviadas: *Sexta-feira, 15 De Novembro de 2019 10:29:06 *Assunto: *[ovirt-users] Re: metrics
Hello,
Still nothing happens. I'm a little lost here. I'm getting this message when running ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml -- ask-vault-pass
changed: [localhost -> localhost] => { "msg": "oVirt Metrics store is not configured. This host will not be configured to send metrics" }
I think this is the problem? Any idea?
Thanks a lot
José
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 18:06:51 *Assunto: *Re: [ovirt-users] metrics
this should do it: https://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2
On Thu, Nov 14, 2019 at 1:38 PM <suporte@logicworks.pt> wrote:
Ok. I just commented it out and run # ./configure_ovirt_machines_for_metrics.sh --playbook=ovirt-metrics-store-installation.yml --ask-vault-pass PLAY RECAP ********************************************************************************** localhost : ok=5 changed=1 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0
but nothing happens I think I need the URL with openshift upstream
I'm a newbie with openshift, can you point me to the right direction?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:15:26 *Assunto: *Re: [ovirt-users] metrics
It has been a while but I think you either just leave it commented out or have to replace URL with open shift upstream. Try leaving it commented
On Thu, Nov 14, 2019 at 1:06 PM <suporte@logicworks.pt> wrote:
Ok, so how can I get the guest image?
Thanks
------------------------------ *De: *"Jayme" <jaymef@gmail.com> *Para: *suporte@logicworks.pt *Cc: *"users" <users@ovirt.org> *Enviadas: *Quinta-feira, 14 De Novembro de 2019 17:05:31 *Assunto: *Re: [ovirt-users] metrics
An RH subscription is not needed to install ovirt metrics.
On Thu, Nov 14, 2019 at 12:21 PM <suporte@logicworks.pt> wrote:
> Hi, > > I'm trying to install metrics for Version 4.3.6.7-1.el7 > Do I need a RH subscription to downloading the RHEL guest image? > (qcow_url:) > > Thanks > > > -- > ------------------------------ > Jose Ferradeira > http://www.logicworks.pt > _______________________________________________ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-leave@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ... >
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/75HKFNTUOQPETR...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RULG5CORJNCBFE... _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OVTTKZXNYBCUXE...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VQZNAAUZYZDX4U...
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2BDYZXK4YBFEX6...
Hi, No. For oVirt the RH subscription details are not required. Please read the configuration files description carefully. If you feel they are not clear enough, please let me know by opening a bug in bugzilla. Thank you. Regards, -- Shirly Radco BI Principal Software Engineer Red Hat <https://www.redhat.com/> <https://www.redhat.com/> On Thu, Nov 14, 2019 at 6:21 PM <suporte@logicworks.pt> wrote:
Hi,
I'm trying to install metrics for Version 4.3.6.7-1.el7 Do I need a RH subscription to downloading the RHEL guest image? (qcow_url:)
Thanks
-- ------------------------------ Jose Ferradeira http://www.logicworks.pt _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/45EEILEJWLZTNQ...
participants (4)
-
Jayme -
Roy Golan -
Shirly Radco -
suporte＠logicworks.pt