How to setup host network to link ovirtmgmt with eth0 automatically?
Hi, When I install a host, it fails with: 2016-05-24 07:00:01,749 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt' 2016-05-24 07:00:01,781 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event ID: -1, Message: Host node3 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt' After I click the "Hosts" -> subtab "Network Interfaces" -> "Setup Host Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link with eth0, then activate host "node3" successfully. My question is how to make such manual operation automatically? Then I can run some automatic tests. Thanks a lot. --Kai
And network configurations on node: [root at ovirt-node] # brctl show bridge name bridge id STP enabled interfaces docker0 8000.0242ae1de711 no ovirtmgmt 8000.001320ff73aa no eth0 [root at ovirt-node] # ifconfig -a docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11 inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6331 errors:0 dropped:0 overruns:0 frame:0 TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB) Interrupt:20 Memory:d1100000-d1120000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:36 errors:0 dropped:0 overruns:0 frame:0 TX packets:36 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB) ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa inet addr:128.224.165.170 Bcast:128.224.165.255 Mask:255.255.255.0 inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6295 errors:0 dropped:6 overruns:0 frame:0 TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB) sit0 Link encap:UNSPEC HWaddr 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Thanks, Kai On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang@gmail.com> wrote:
Hi,
When I install a host, it fails with:
2016-05-24 07:00:01,749 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt' 2016-05-24 07:00:01,781 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event ID: -1, Message: Host node3 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt'
After I click the "Hosts" -> subtab "Network Interfaces" -> "Setup Host Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link with eth0, then activate host "node3" successfully.
My question is how to make such manual operation automatically? Then I can run some automatic tests.
Thanks a lot.
--Kai
Hi, I checked vdsm.log, it show error: jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list 0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None) jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback (most recent call last):\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module>\n main()\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main\n stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError: \'network\'\n\n'; <rc> = 2 jsonrpc.Executor/0::INFO::2016-05-24 09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent call last): File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module> main() File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main stats['network'].update(ovs_networks_stats(stats['network'])) KeyError: 'network' I'm checking what wrong with it. Thanks, Kai On Tue, May 24, 2016 at 3:57 PM, Kai Kang <kai.7.kang@gmail.com> wrote:
And network configurations on node:
[root at ovirt-node] # brctl show bridge name bridge id STP enabled interfaces docker0 8000.0242ae1de711 no ovirtmgmt 8000.001320ff73aa no eth0
[root at ovirt-node] # ifconfig -a docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11 inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6331 errors:0 dropped:0 overruns:0 frame:0 TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB) Interrupt:20 Memory:d1100000-d1120000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:36 errors:0 dropped:0 overruns:0 frame:0 TX packets:36 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)
ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa inet addr:128.224.165.170 Bcast:128.224.165.255 Mask:255.255.255.0 inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6295 errors:0 dropped:6 overruns:0 frame:0 TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)
sit0 Link encap:UNSPEC HWaddr 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Thanks, Kai
On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang@gmail.com> wrote:
Hi,
When I install a host, it fails with:
2016-05-24 07:00:01,749 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt' 2016-05-24 07:00:01,781 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event ID: -1, Message: Host node3 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt'
After I click the "Hosts" -> subtab "Network Interfaces" -> "Setup Host Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link with eth0, then activate host "node3" successfully.
My question is how to make such manual operation automatically? Then I can run some automatic tests.
Thanks a lot.
--Kai
This is a multi-part message in MIME format. --------------330EFE126ADAB3CE49939284 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Hi, are using the Open vSwitch hook intentionally? If not, you |yum remove vdsm-hook-ovs for a while. What is your exact VDSM version? | Thanks, Ondra On 24.5.2016 11:47, Kai Kang wrote:
Hi,
I checked vdsm.log, it show error:
jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list 0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None) jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback (most recent call last):\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module>\n main()\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main\n stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError: \'network\'\n\n'; <rc> = 2 jsonrpc.Executor/0::INFO::2016-05-24 09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent call last): File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module> main() File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main stats['network'].update(ovs_networks_stats(stats['network'])) KeyError: 'network'
I'm checking what wrong with it.
Thanks, Kai
On Tue, May 24, 2016 at 3:57 PM, Kai Kang <kai.7.kang@gmail.com <mailto:kai.7.kang@gmail.com>> wrote:
And network configurations on node:
[root at ovirt-node] # brctl show bridge name bridge id STP enabled interfaces docker0 8000.0242ae1de711 no ovirtmgmt 8000.001320ff73aa no eth0
[root at ovirt-node] # ifconfig -a docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11 inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6331 errors:0 dropped:0 overruns:0 frame:0 TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB) Interrupt:20 Memory:d1100000-d1120000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:36 errors:0 dropped:0 overruns:0 frame:0 TX packets:36 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)
ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa inet addr:128.224.165.170 Bcast:128.224.165.255 Mask:255.255.255.0 inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6295 errors:0 dropped:6 overruns:0 frame:0 TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)
sit0 Link encap:UNSPEC HWaddr 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Thanks, Kai
On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang@gmail.com <mailto:kai.7.kang@gmail.com>> wrote:
Hi,
When I install a host, it fails with:
2016-05-24 07:00:01,749 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt' 2016-05-24 07:00:01,781 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event ID: -1, Message: Host node3 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt'
After I click the "Hosts" -> subtab "Network Interfaces" -> "Setup Host Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link with eth0, then activate host "node3" successfully.
My question is how to make such manual operation automatically? Then I can run some automatic tests.
Thanks a lot.
--Kai
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--------------330EFE126ADAB3CE49939284 Content-Type: text/html; charset=windows-1252 Content-Transfer-Encoding: 8bit <html> <head> <meta content="text/html; charset=windows-1252" http-equiv="Content-Type"> </head> <body text="#000000" bgcolor="#FFFFFF"> <p>Hi,<br> <br> are using the Open vSwitch hook intentionally? If not, you <code>yum remove vdsm-hook-ovs for a while. What is your exact VDSM version?<br> <br> </code></p> <p>Thanks, Ondra<br> </p> <p><br> </p> <div class="moz-cite-prefix">On 24.5.2016 11:47, Kai Kang wrote:<br> </div> <blockquote cite="mid:CADC9KmoRQ18D0Kh1UCaLCyBa_MmYtRuVux0WkTOo21BUFf0-wA@mail.gmail.com" type="cite"> <div dir="ltr">Hi, <div><br> </div> <div>I checked vdsm.log, it show error:</div> <div><br> </div> <div> <div>jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list 0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None)</div> <div>jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback (most recent call last):\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module>\n main()\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main\n stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError: \'network\'\n\n'; <rc> = 2</div> <div>jsonrpc.Executor/0::INFO::2016-05-24 09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent call last):</div> <div> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module></div> <div> main()</div> <div> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main</div> <div> stats['network'].update(ovs_networks_stats(stats['network']))</div> <div>KeyError: 'network'</div> </div> <div><br> </div> <div><br> </div> <div>I'm checking what wrong with it.</div> <div><br> </div> <div>Thanks,</div> <div>Kai</div> <div><br> </div> <div><br> </div> </div> <div class="gmail_extra"><br> <div class="gmail_quote">On Tue, May 24, 2016 at 3:57 PM, Kai Kang <span dir="ltr"><<a moz-do-not-send="true" href="mailto:kai.7.kang@gmail.com" target="_blank">kai.7.kang@gmail.com</a>></span> wrote:<br> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div dir="ltr">And network configurations on node: <div><br> </div> <div>[root at ovirt-node] # brctl show<br> </div> <div>bridge name bridge id STP enabled interfaces</div> <div>docker0 8000.0242ae1de711 no</div> <div>ovirtmgmt 8000.001320ff73aa no eth0</div> <div><br> </div> <div>[root at ovirt-node] # ifconfig -a<br> </div> <div> <div>docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11</div> <div> inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0</div> <div> UP BROADCAST MULTICAST MTU:1500 Metric:1</div> <div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div> <div><br> </div> <div>eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa</div> <div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div> <div> RX packets:6331 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:1000</div> <div> RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB)</div> <div> Interrupt:20 Memory:d1100000-d1120000</div> <div><br> </div> <div>lo Link encap:Local Loopback</div> <div> inet addr:127.0.0.1 Mask:255.0.0.0</div> <div> inet6 addr: ::1/128 Scope:Host</div> <div> UP LOOPBACK RUNNING MTU:65536 Metric:1</div> <div> RX packets:36 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:36 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)</div> <div><br> </div> <div>ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa</div> <div> inet addr:128.224.165.170 Bcast:128.224.165.255 Mask:255.255.255.0</div> <div> inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link</div> <div> inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global</div> <div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div> <div> RX packets:6295 errors:0 dropped:6 overruns:0 frame:0</div> <div> TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)</div> <div><br> </div> <div>sit0 Link encap:UNSPEC HWaddr 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00</div> <div> NOARP MTU:1480 Metric:1</div> <div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div> <div><br> </div> <div>wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf</div> <div> BROADCAST MULTICAST MTU:1500 Metric:1</div> <div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0</div> </div> <div> <div> collisions:0 txqueuelen:1000</div> <div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div> </div> <div><br> </div> <div><br> </div> <div>Thanks,</div> <div>Kai</div> <div><br> </div> <div><br> </div> </div> <div class="HOEnZb"> <div class="h5"> <div class="gmail_extra"><br> <div class="gmail_quote">On Tue, May 24, 2016 at 3:36 PM, Kai Kang <span dir="ltr"><<a moz-do-not-send="true" href="mailto:kai.7.kang@gmail.com" target="_blank"><a class="moz-txt-link-abbreviated" href="mailto:kai.7.kang@gmail.com">kai.7.kang@gmail.com</a></a>></span> wrote:<br> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div dir="ltr">Hi, <div><br> </div> <div>When I install a host, it fails with:</div> <div><br> </div> <div> <div>2016-05-24 07:00:01,749 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt'</div> <div>2016-05-24 07:00:01,781 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event ID: -1, Message: Host node3 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt'</div> </div> <div><br> </div> <div>After I click the "Hosts" -> subtab "Network Interfaces" -> "Setup Host Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link with eth0, then activate host "node3" successfully.</div> <div><br> </div> <div>My question is how to make such manual operation automatically? Then I can run some automatic tests.</div> <div><br> </div> <div>Thanks a lot.</div> <span><font color="#888888"> <div><br> </div> <div>--Kai</div> </font></span></div> </blockquote> </div> <br> </div> </div> </div> </blockquote> </div> <br> </div> <br> <fieldset class="mimeAttachmentHeader"></fieldset> <br> <pre wrap="">_______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> </pre> </blockquote> <br> </body> </html> --------------330EFE126ADAB3CE49939284--
This is a multi-part message in MIME format. --------------9AB0A24FAC68ED057BB1A55E Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Hi again, (correcting myself a bit) are using the Open vSwitch hook intentionally? If not, you can |yum remove vdsm-hook-ovs| for a while. What is your exact VDSM version? Also, can you give a little more context from your vdsm.log, and also from supervdsm.log? I think the vdsm.log failure is only related to stats reporting, and is not the root problem. If you don't have any confidential information in the logs (or you can remove it), I suggest that you open a bug on product=vdsm at https://bugzilla.redhat.com/ Have no fear about naming the bug, it can be renamed if necessary. Thanks, Ondra
On 24.5.2016 11:47, Kai Kang wrote:
Hi,
I checked vdsm.log, it show error:
jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list 0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None) jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback (most recent call last):\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module>\n main()\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main\n stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError: \'network\'\n\n'; <rc> = 2 jsonrpc.Executor/0::INFO::2016-05-24 09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent call last): File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module> main() File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main stats['network'].update(ovs_networks_stats(stats['network'])) KeyError: 'network'
I'm checking what wrong with it.
Thanks, Kai
On Tue, May 24, 2016 at 3:57 PM, Kai Kang <kai.7.kang@gmail.com <mailto:kai.7.kang@gmail.com>> wrote:
And network configurations on node:
[root at ovirt-node] # brctl show bridge name bridge id STP enabled interfaces docker0 8000.0242ae1de711 no ovirtmgmt 8000.001320ff73aa no eth0
[root at ovirt-node] # ifconfig -a docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11 inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6331 errors:0 dropped:0 overruns:0 frame:0 TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB) Interrupt:20 Memory:d1100000-d1120000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:36 errors:0 dropped:0 overruns:0 frame:0 TX packets:36 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)
ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa inet addr:128.224.165.170 Bcast:128.224.165.255 Mask:255.255.255.0 inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6295 errors:0 dropped:6 overruns:0 frame:0 TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)
sit0 Link encap:UNSPEC HWaddr 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Thanks, Kai
On Tue, May 24, 2016 at 3:36 PM, Kai Kang <kai.7.kang@gmail.com> wrote:
Hi,
When I install a host, it fails with:
2016-05-24 07:00:01,749 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt' 2016-05-24 07:00:01,781 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event ID: -1, Message: Host node3 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt'
After I click the "Hosts" -> subtab "Network Interfaces" -> "Setup Host Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link with eth0, then activate host "node3" successfully.
My question is how to make such manual operation automatically? Then I can run some automatic tests.
Thanks a lot.
--Kai
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--------------9AB0A24FAC68ED057BB1A55E Content-Type: text/html; charset=windows-1252 Content-Transfer-Encoding: 8bit <html> <head> <meta content="text/html; charset=windows-1252" http-equiv="Content-Type"> </head> <body text="#000000" bgcolor="#FFFFFF"> Hi again, (correcting myself a bit)<br> <br> are using the Open vSwitch hook intentionally? If not, you can <code>yum remove vdsm-hook-ovs</code> for a while. What is your exact VDSM version?<br> <br> Also, can you give a little more context from your vdsm.log, and also from supervdsm.log? I think the vdsm.log failure is only related to stats reporting, and is not the root problem.<br> <br> If you don't have any confidential information in the logs (or you can remove it), I suggest that you open a bug on product=vdsm at <a class="moz-txt-link-freetext" href="https://bugzilla.redhat.com/">https://bugzilla.redhat.com/</a> Have no fear about naming the bug, it can be renamed if necessary.<br> <br> Thanks, Ondra<br> <blockquote cite="mid:0507c822-dc60-a85a-ede2-3ca902820f61@svobodasoft.cz" type="cite"> </blockquote> <br> <blockquote cite="mid:0507c822-dc60-a85a-ede2-3ca902820f61@svobodasoft.cz" type="cite"> <div class="moz-cite-prefix">On 24.5.2016 11:47, Kai Kang wrote:<br> </div> <blockquote cite="mid:CADC9KmoRQ18D0Kh1UCaLCyBa_MmYtRuVux0WkTOo21BUFf0-wA@mail.gmail.com" type="cite"> <div dir="ltr">Hi, <div><br> </div> <div>I checked vdsm.log, it show error:</div> <div><br> </div> <div> <div>jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list 0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None)</div> <div>jsonrpc.Executor/0::DEBUG::2016-05-24 09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback (most recent call last):\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module>\n main()\n File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main\n stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError: \'network\'\n\n'; <rc> = 2</div> <div>jsonrpc.Executor/0::INFO::2016-05-24 09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent call last):</div> <div> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in <module></div> <div> main()</div> <div> File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in main</div> <div> stats['network'].update(ovs_networks_stats(stats['network']))</div> <div>KeyError: 'network'</div> </div> <div><br> </div> <div><br> </div> <div>I'm checking what wrong with it.</div> <div><br> </div> <div>Thanks,</div> <div>Kai</div> <div><br> </div> <div><br> </div> </div> <div class="gmail_extra"><br> <div class="gmail_quote">On Tue, May 24, 2016 at 3:57 PM, Kai Kang <span dir="ltr"><<a moz-do-not-send="true" href="mailto:kai.7.kang@gmail.com" target="_blank">kai.7.kang@gmail.com</a>></span> wrote:<br> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div dir="ltr">And network configurations on node: <div><br> </div> <div>[root at ovirt-node] # brctl show<br> </div> <div>bridge name bridge id STP enabled interfaces</div> <div>docker0 8000.0242ae1de711 no</div> <div>ovirtmgmt 8000.001320ff73aa no eth0</div> <div><br> </div> <div>[root at ovirt-node] # ifconfig -a<br> </div> <div> <div>docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11</div> <div> inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0</div> <div> UP BROADCAST MULTICAST MTU:1500 Metric:1</div> <div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div> <div><br> </div> <div>eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa</div> <div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div> <div> RX packets:6331 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:1000</div> <div> RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB)</div> <div> Interrupt:20 Memory:d1100000-d1120000</div> <div><br> </div> <div>lo Link encap:Local Loopback</div> <div> inet addr:127.0.0.1 Mask:255.0.0.0</div> <div> inet6 addr: ::1/128 Scope:Host</div> <div> UP LOOPBACK RUNNING MTU:65536 Metric:1</div> <div> RX packets:36 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:36 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)</div> <div><br> </div> <div>ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa</div> <div> inet addr:128.224.165.170 Bcast:128.224.165.255 Mask:255.255.255.0</div> <div> inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link</div> <div> inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64 Scope:Global</div> <div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div> <div> RX packets:6295 errors:0 dropped:6 overruns:0 frame:0</div> <div> TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)</div> <div><br> </div> <div>sit0 Link encap:UNSPEC HWaddr 00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00</div> <div> NOARP MTU:1480 Metric:1</div> <div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0</div> <div> collisions:0 txqueuelen:0</div> <div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div> <div><br> </div> <div>wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf</div> <div> BROADCAST MULTICAST MTU:1500 Metric:1</div> <div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div> <div> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0</div> </div> <div> <div> collisions:0 txqueuelen:1000</div> <div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div> </div> <div><br> </div> <div><br> </div> <div>Thanks,</div> <div>Kai</div> <div><br> </div> <div><br> </div> </div> <div class="HOEnZb"> <div class="h5"> <div class="gmail_extra"><br> <div class="gmail_quote">On Tue, May 24, 2016 at 3:36 PM, Kai Kang <span dir="ltr"><<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:kai.7.kang@gmail.com"><a class="moz-txt-link-abbreviated" href="mailto:kai.7.kang@gmail.com">kai.7.kang@gmail.com</a></a>></span> wrote:<br> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div dir="ltr">Hi, <div><br> </div> <div>When I install a host, it fails with:</div> <div><br> </div> <div> <div>2016-05-24 07:00:01,749 ERROR [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is set to Non-Operational, it is missing the following networks: 'ovirtmgmt'</div> <div>2016-05-24 07:00:01,781 WARN [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID: 1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call Stack: null, Custom Event ID: -1, Message: Host node3 does not comply with the cluster Default networks, the following networks are missing on host: 'ovirtmgmt'</div> </div> <div><br> </div> <div>After I click the "Hosts" -> subtab "Network Interfaces" -> "Setup Host Networks" on the web ui and drag ovirtmgmt to "Assigned Logical" to link with eth0, then activate host "node3" successfully.</div> <div><br> </div> <div>My question is how to make such manual operation automatically? Then I can run some automatic tests.</div> <div><br> </div> <div>Thanks a lot.</div> <span><font color="#888888"> <div><br> </div> <div>--Kai</div> </font></span></div> </blockquote> </div> <br> </div> </div> </div> </blockquote> </div> <br> </div> <br> <fieldset class="mimeAttachmentHeader"></fieldset> <br> <pre wrap="">_______________________________________________ Users mailing list <a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a> <a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> </pre> </blockquote> <br> </blockquote> <br> </body> </html> --------------9AB0A24FAC68ED057BB1A55E--
participants (2)
-
Kai Kang -
Ondřej Svoboda