Hi, Sandvik I have read the engine.log, it shows: Cannot find a valid baseurl for repo: base can you show me your repo? 2014-11-21 12:21 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com&gt;: > Hi, > > I'm sorry I forgot, here's the attachement. > > On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin < > agustinsandvik(a)gmail.com&gt; wrote: > >> Hi, >> >> I'm sorry I forgot, here's the attachement. >> >> On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr(a)gmail.com&gt; >> wrote: >> >>> Hi, Sandvik >>> maybe you forgot to attach your log~ that's >>> ovirt-hosted-engine-setup, so you can also attach your setup log:-) >>> >>> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com&gt;: >>> >>>> Hi users, >>>> >>>> Chou, here's my I already tried your suggestion right now, but it >>>> still failed, here's my engine.log and vdsm.log. and one more thing, since >>>> the time that I started the installation of ovirt-hosted-engine setup, I >>>> starting to have this kind of error message on my /var/log/message. >>>> >>>> >>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: >>>> multipath: error getting device >>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding >>>> target to table >>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: >>>> multipath: error getting device >>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding >>>> target to table >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>> can't remove >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>> can't remove >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>> can't remove >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) >>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, >>>> can't remove >>>> >>>> >>>> Thanks in advance >>>> Sandvik >>>> >>>> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr(a)gmail.com&gt; >>>> wrote: >>>> >>>>> Hi, Sandvik >>>>> it's just a suggestion:-) >>>>> >>>>> i think you can have a try, as i don't know my solution worked or >>>>> not. maybe there are some other people who have encountered this problem >>>>> before and they can give you some advice:-) >>>>> >>>>> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin <agustinsandvik(a)gmail.com&gt; >>>>> : >>>>> >>>>>> HI Chou, >>>>>> >>>>>> >>>>>> Thanks, I will try your solution now, and should I resend this email >>>>>> to users(a)ovirt.org? >>>>>> >>>>>> >>>>>> Thanks >>>>>> Sandvik >>>>>> >>>>>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr(a)gmail.com&gt; >>>>>> wrote: >>>>>> >>>>>>> Hi, Sandvik >>>>>>> and please don't send the email to me only but to user mail >>>>>>> list, so everybody can help you :-) >>>>>>> >>>>>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr(a)gmail.com&gt;: >>>>>>> >>>>>>>> Hi, Sandvik >>>>>>>> i can see the ERROR message: Command returned failure code 1 >>>>>>>> during SSH session .... you can try these: >>>>>>>> >>>>>>>> 1. stop firewall on the hosted_engine_1 >>>>>>>> 2. running command: vdsm-tool configure >>>>>>>> >>>>>>>> if it's still failure, please attach your engine.log and >>>>>>>> vdsm.log >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin < >>>>>>>> agustinsandvik(a)gmail.com&gt;: >>>>>>>> >>>>>>>>> Hi Chou, >>>>>>>>> >>>>>>>>> >>>>>>>>> I have successfully install the hosted engine, but at the end of >>>>>>>>> the installation I have this kind of error message >>>>>>>>> >>>>>>>>> To continue make a selection from the options below: >>>>>>>>> (1) Continue setup - engine installation is complete >>>>>>>>> (2) Power off and restart the VM >>>>>>>>> (3) Abort setup >>>>>>>>> >>>>>>>>> (1, 2, 3)[1]: >>>>>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status! >>>>>>>>> Enter the name of the cluster to which you want to add >>>>>>>>> the host (Default) [Default]: >>>>>>>>> [ INFO ] Waiting for the host to become operational in the >>>>>>>>> engine. This may take several minutes... >>>>>>>>> [ ERROR ] The VDSM host was found in a failed state. Please check >>>>>>>>> engine and bootstrap installation logs. >>>>>>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager >>>>>>>>> Please shutdown the VM allowing the system to launch it >>>>>>>>> as a monitored service. >>>>>>>>> The system will wait until the VM is down. >>>>>>>>> [ INFO ] Enabling and starting HA services >>>>>>>>> Hosted Engine successfully set up >>>>>>>>> [ INFO ] Stage: Clean up >>>>>>>>> [ INFO ] Generating answer file >>>>>>>>> '/etc/ovirt-hosted-engine/answers.conf' >>>>>>>>> [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has >>>>>>>>> been updated >>>>>>>>> [ INFO ] Stage: Pre-termination >>>>>>>>> [ INFO ] Stage: Termination >>>>>>>>> >>>>>>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status >>>>>>>>> failed. I tried to activate it inside the webadmin, but it say's Error >>>>>>>>> while executing action: >>>>>>>>> >>>>>>>>> hosted_engine_1: >>>>>>>>> >>>>>>>>> - Cannot activate Host. Host has no unique id. >>>>>>>>> >>>>>>>>> >>>>>>>>> and when I try to reinstall it on the webadmin, nothing happen it >>>>>>>>> still failed status. >>>>>>>>> >>>>>>>>> I hope you can help me. >>>>>>>>> >>>>>>>>> Please see attach for screenshot. >>>>>>>>> >>>>>>>>> >>>>>>>>> Thanks in advance. >>>>>>>>> sandvik >>>>>>>>> >>>>>>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin < >>>>>>>>> agustinsandvik(a)gmail.com&gt; wrote: >>>>>>>>> >>>>>>>>>> Hi guys, >>>>>>>>>> >>>>>>>>>> First of all I want to thank you for replying my email. >>>>>>>>>> @Chou, yes I can access the engine webadmin. >>>>>>>>>> @Chao, I've tried the no. 1 option and it worked, when I check >>>>>>>>>> my /etc/hosts I have hostname conflict, then the ovirt engine is now >>>>>>>>>> reachable, but there's another error message, it say's invalid certificate. >>>>>>>>>> Is this because of I've put different FQDN during the installation process? >>>>>>>>>> >>>>>>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou < >>>>>>>>>> coffee.zyr(a)gmail.com&gt; wrote: >>>>>>>>>> >>>>>>>>>>> Hi, Chao >>>>>>>>>>> You may make a mistake, that's not my setup :-) >>>>>>>>>>> But i don't think it's a problem of password. If the >>>>>>>>>>> passwords were not the same, it will throw an ERROR of: >>>>>>>>>>> [ ERROR ] Cannot automatically add the host to cluster None: >>>>>>>>>>> HTTP Status 401 >>>>>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add the >>>>>>>>>>> host to cluster None >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> so, i guess, maybe Sandvik's setup is still not accessable ? >>>>>>>>>>> >>>>>>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao <xiec.fnst(a)cn.fujitsu.com&gt; >>>>>>>>>>> : >>>>>>>>>>> >>>>>>>>>>> Hi, Chou >>>>>>>>>>>> >>>>>>>>>>>> It seems your rhevm is not setup successfully. I >>>>>>>>>>>> suggest you can think about the two possible root cause below: >>>>>>>>>>>> >>>>>>>>>>>> 1. your /etc/hosts about host/rhevm-vm is configured >>>>>>>>>>>> correctly? >>>>>>>>>>>> >>>>>>>>>>>> 2. your password set in hosted-engine –deploy and >>>>>>>>>>>> rhevm-setup is same ? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> If those are not your problem cause, Please provide more log >>>>>>>>>>>> about it. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> *发件人:* users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] >>>>>>>>>>>> *代表 *Coffee Chou >>>>>>>>>>>> *发送时间:* 2014年11月19日 10:08 >>>>>>>>>>>> *收件人:* Sandvik Agustin >>>>>>>>>>>> *抄送:* users(a)ovirt.org >>>>>>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Hi, can you access Engine webadmin with this ERROR message? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin < >>>>>>>>>>>> agustinsandvik(a)gmail.com&gt;: >>>>>>>>>>>> >>>>>>>>>>>> Hi!, >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> I have install ovirt 3.4 on centos 6.6 following this >>>>>>>>>>>> documentation >>>>>>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> I have already completed the installation of ovirt engine >>>>>>>>>>>> inside of the vm, when going back to hosted-engine --deploy >>>>>>>>>>>> terminal and choosing 1 the hosted-engine --deploy says: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> (1, 2, 3)[1]: 1 >>>>>>>>>>>> >>>>>>>>>>>> [ ERROR ] Engine is still unreachable >>>>>>>>>>>> >>>>>>>>>>>> Engine health status page is not yet reachable. >>>>>>>>>>>> >>>>>>>>>>>> To continue make a selection from the options below: >>>>>>>>>>>> >>>>>>>>>>>> (1) Continue setup - engine installation is complete >>>>>>>>>>>> >>>>>>>>>>>> (2) Power off and restart the VM >>>>>>>>>>>> >>>>>>>>>>>> (3) Abort setup >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> what should I do? how to fix this? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Thanks in advance, >>>>>>>>>>>> >>>>>>>>>>>> sandvik >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Users mailing list >>>>>>>>>>>> Users(a)ovirt.org >>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >