
------=_Part_9727235_2133361016.1388475877246 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Are you sure that vdsm is running? The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807 Also make sure that your clocked are synced. ----- Original Message -----
From: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> To: "Meital Bourvine" <mbourvin@redhat.com> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Tuesday, December 31, 2013 9:39:09 AM Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com > wrote:
Engine log can be found on the engine (while vdsm.log is on the host).
The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from it.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk >
To: "Meital Bourvine" < mbourvin@redhat.com >
Cc: " users@ovirt.org " < Users@ovirt.org >
Sent: Tuesday, December 31, 2013 8:42:43 AM
Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com > wrote:
Hi Nauman,
Maybe it's a selinux issue?
Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk >
To: " users@ovirt.org " < Users@ovirt.org >
Sent: Tuesday, December 31, 2013 7:13:01 AM
Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.
Regards
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users@ovirt.org
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
------=_Part_9727235_2133361016.1388475877246 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: times new roman, new york, times, se= rif; font-size: 12pt; color: #000000"><div>Are you sure that vdsm is runnin= g?<br></div><div><br></div><div>The error happened at 2013-12-31 11:32:56,9= 99 (engine.log)<br></div><div>but the last line in vdsm.log is from 2013-12= -31 07:20:50,807<br></div><div><br></div><div>Also make sure that your cloc= ked are synced. <br></div><div><br></div><div><br></div><hr id=3D"zwchr"><b= lockquote style=3D"border-left:2px solid #1010FF;margin-left:5px;padding-le= ft:5px;color:#000;font-weight:normal;font-style:normal;text-decoration:none= ;font-family:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From: </b>"Naum= an Abbas" <nauman.abbas@seecs.edu.pk><br><b>To: </b>"Meital Bourvine"= <mbourvin@redhat.com><br><b>Cc: </b>"users@ovirt.org" <Users@ovir= t.org><br><b>Sent: </b>Tuesday, December 31, 2013 9:39:09 AM<br><b>Subje= ct: </b>Re: [Users] VM not starting up<br><div><br></div><div dir=3D"ltr">S= ending files one by one. Vdsm.log</div><div class=3D"gmail_extra"><br><div>= <br></div><div class=3D"gmail_quote">On Tue, Dec 31, 2013 at 11:48 AM, Meit= al Bourvine <span dir=3D"ltr"><<a href=3D"mailto:mbourvin@redhat.com" ta= rget=3D"_blank">mbourvin@redhat.com</a>></span> wrote:<br> <blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p= x #ccc solid;padding-left:1ex"><div><div style=3D"font-size:12pt;font-famil= y:times new roman,new york,times,serif"><div>Engine log can be found on the= engine (while vdsm.log is on the host). </div> <div>The full path is - /var/log/ovirt-engine/engine.log<br></div><div><br>= </div><div>audit.log - /var/log/audit/audit.log<br></div><div><br></div><di= v>About the vdsm log - I don't see any error there, I think that you cut to= o much from it.<br> </div><div><br></div><hr><blockquote style=3D"padding-left:5px;font-size:12= pt;font-style:normal;margin-left:5px;font-family:Helvetica,Arial,sans-serif= ;text-decoration:none;font-weight:normal;border-left:2px solid #1010ff"><b>= From: </b>"Nauman Abbas" <<a href=3D"mailto:nauman.abbas@seecs.edu.pk" t= arget=3D"_blank">nauman.abbas@seecs.edu.pk</a>><br> <b>To: </b>"Meital Bourvine" <<a href=3D"mailto:mbourvin@redhat.com" tar= get=3D"_blank">mbourvin@redhat.com</a>><br><b>Cc: </b>"<a href=3D"mailto= :users@ovirt.org" target=3D"_blank">users@ovirt.org</a>" <<a href=3D"mai= lto:Users@ovirt.org" target=3D"_blank">Users@ovirt.org</a>><br> <b>Sent: </b>Tuesday, December 31, 2013 8:42:43 AM<br><b>Subject: </b>Re: [= Users] VM not starting up<div><div class=3D"h5"><br><div><br></div><div dir= =3D"ltr">Hello Meital<div><br></div><div>SELinux is off. The cluster doesn'= t work if SELinux is on, my hosts and storage is showing up as okay but VM = is not starting up. </div> <div><br></div><div>I've managed to get vdsm.log but cannot find engine.log= and audit.log. Sorry for being a noob, if you can tell me the path to thes= e files I'll send them right away. </div> </div><div class=3D"gmail_extra"><br><div><br></div><div class=3D"gmail_quo= te">On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine <span dir=3D"ltr"><= ;<a href=3D"mailto:mbourvin@redhat.com" target=3D"_blank">mbourvin@redhat.c= om</a>></span> wrote:<br> <blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p= x #ccc solid;padding-left:1ex"><div><div style=3D"font-size:12pt;font-famil= y:times new roman,new york,times,serif"><div>Hi Nauman,<br></div><div><br><= /div> <div>Maybe it's a selinux issue?<br></div><div>Please try running `setenfor= ce 0` before starting the vm.<br></div><div><br></div><div>Also please atta= ch engine.log, vdsm.log, and audit.log<br></div><div><br></div><hr> <blockquote style=3D"padding-left:5px;font-size:12pt;font-style:normal;marg= in-left:5px;font-family:Helvetica,Arial,sans-serif;text-decoration:none;fon= t-weight:normal;border-left:2px solid #1010ff"><b>From: </b>"Nauman Abbas" = <<a href=3D"mailto:nauman.abbas@seecs.edu.pk" target=3D"_blank">nauman.a= bbas@seecs.edu.pk</a>><br> <b>To: </b>"<a href=3D"mailto:users@ovirt.org" target=3D"_blank">users@ovir= t.org</a>" <<a href=3D"mailto:Users@ovirt.org" target=3D"_blank">Users@o= virt.org</a>><br><b>Sent: </b>Tuesday, December 31, 2013 7:13:01 AM<br> <b>Subject: </b>[Users] VM not starting up<div><div><br><div><br></div><div= dir=3D"ltr">Hello all,<div><br></div><div>First of all thank you for your = help, I've finally managed to get my Cluster configured properly but now th= at I create VMs I'm facing another problem. Whenever I start my VM I get th= is error. </div> <div><br></div><div>"<span style=3D"color:rgb(255,255,255);font-family:'Ari= al Unicode MS',Arial,sans-serif;line-height:25.98958396911621px;white-space= :nowrap;background-color:rgb(102,102,102)">VM TestVm is down. Exit message:= Child quit during startup handshake: Input/output error."</span></div> <div><br></div><div>I've googled around but haven't found any satisfactory = solution. If anyone can help out it would be great. </div><div><br></d= iv><div>Regards</div><div><div dir=3D"ltr"><div><br></div><span style=3D"co= lor:#3d85c6">Nauman Abbas<br> </span><div><div><span style=3D"color:#3d85c6"><span>Assistant System Admi= nistrator</span><span style=3D"font-size:small"> (LMS),</span></span><= /div><div><span style=3D"color:#3d85c6">Room No. A-207, SEECS,</span></div> <div><span style=3D"color:#3d85c6">National University of Sciences & Te= chnology,</span></div><div><a><span style=3D"color:#3d85c6">+ 92 321 535994= 6</span></a><br></div></div></div></div></div> <br></div></div>_______________________________________________<br>Users ma= iling list<br><a href=3D"mailto:Users@ovirt.org" target=3D"_blank">Users@ov= irt.org</a><br><a href=3D"http://lists.ovirt.org/mailman/listinfo/users" ta= rget=3D"_blank">http://lists.ovirt.org/mailman/listinfo/users</a><br> </blockquote><div><br></div></div></div></blockquote></div><br><br clear=3D= "all"><div><br></div>-- <br><div dir=3D"ltr"><div><br></div><span style=3D"= color:#3d85c6">Nauman Abbas<br></span><div><div><span style=3D"color:#3d85c= 6"><span>Assistant System Administrator</span><span style=3D"font-size:smal= l"> (LMS),</span></span></div> <div><span style=3D"color:#3d85c6">Room No. A-207, SEECS,</span></div><div>= <span style=3D"color:#3d85c6">National University of Sciences & Technol= ogy,</span></div><div><a><span style=3D"color:#3d85c6">+ 92 321 5359946</sp= an></a><br> </div> </div></div> </div> </div></div></blockquote><div><br></div></div></div></blockquote></div><br>= <br clear=3D"all"><div><br></div>-- <br><div dir=3D"ltr"><div><br></div><sp= an style=3D"color: #3d85c6;" data-mce-style=3D"color: #3d85c6;" color=3D"#3= d85c6">Nauman Abbas<br></span><div><div><span style=3D"color: #3d85c6;" dat= a-mce-style=3D"color: #3d85c6;" color=3D"#3d85c6"><span>Assistant System Ad= ministrator</span><span style=3D"font-size:small"> (LMS),</span></span=
</div> <div><span style=3D"color: #3d85c6;" data-mce-style=3D"color: #3d85c6;" col= or=3D"#3d85c6">Room No. A-207, SEECS,</span></div><div><span style=3D"color= : #3d85c6;" data-mce-style=3D"color: #3d85c6;" color=3D"#3d85c6">National U= niversity of Sciences & Technology,</span></div><div><a><span style=3D"=
color: #3d85c6;" data-mce-style=3D"color: #3d85c6;" color=3D"#3d85c6">+ 92 = 321 5359946</span></a><br data-mce-bogus=3D"1"></div> </div></div> </div> </blockquote><div><br></div></div></body></html> ------=_Part_9727235_2133361016.1388475877246--

Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue. On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine <mbourvin@redhat.com>wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
------------------------------
*From: *"Nauman Abbas" <nauman.abbas@seecs.edu.pk> *To: *"Meital Bourvine" <mbourvin@redhat.com> *Cc: *"users@ovirt.org" <Users@ovirt.org> *Sent: *Tuesday, December 31, 2013 9:39:09 AM
*Subject: *Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine <mbourvin@redhat.com>wrote:
Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from it.
------------------------------
*From: *"Nauman Abbas" <nauman.abbas@seecs.edu.pk> *To: *"Meital Bourvine" <mbourvin@redhat.com> *Cc: *"users@ovirt.org" <Users@ovirt.org> *Sent: *Tuesday, December 31, 2013 8:42:43 AM *Subject: *Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine <mbourvin@redhat.com>wrote:
Hi Nauman,
Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
------------------------------
*From: *"Nauman Abbas" <nauman.abbas@seecs.edu.pk> *To: *"users@ovirt.org" <Users@ovirt.org> *Sent: *Tuesday, December 31, 2013 7:13:01 AM *Subject: *[Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.
"VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.
Regards
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
-- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946

Hi, Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with" or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call. Gadi Ickowicz ----- Original Message ----- From: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> To: "Meital Bourvine" <mbourvin@redhat.com> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue. On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin@redhat.com > wrote: Are you sure that vdsm is running? The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807 Also make sure that your clocked are synced. From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 9:39:09 AM Subject: Re: [Users] VM not starting up Sending files one by one. Vdsm.log On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com > wrote: Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log audit.log - /var/log/audit/audit.log About the vdsm log - I don't see any error there, I think that you cut too much from it. From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up Hello Meital SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up. I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away. On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com > wrote: Hi Nauman, Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm. Also please attach engine.log, vdsm.log, and audit.log From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up Hello all, First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error. " VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error." I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946 _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946 -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946 -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946 _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps. On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz <gickowic@redhat.com> wrote:
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with" or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.
Gadi Ickowicz
----- Original Message ----- From: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> To: "Meital Bourvine" <mbourvin@redhat.com> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin@redhat.com > wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com > wrote:
Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from it.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com > wrote:
Hi Nauman,
Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.
Regards
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946

------YILTOSUYZF0PF63RTFGGUTVFMQPO7D Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=UTF-8 Nauman Abbas <nauman.abbas@seecs.edu.pk> wrote:
I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps.
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz <gickowic@redhat.com> wrote:
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with" or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.
Gadi Ickowicz
----- Original Message ----- From: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> To: "Meital Bourvine" <mbourvin@redhat.com> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin@redhat.com > wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com > wrote:
Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from it.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com > wrote:
Hi Nauman,
Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.
Regards
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
Paste your logs to fpaste.org or similar and put the url in the mail. Your snippets don‘t contain any errors that i can see. -- Sent from my Android tablet with K-9 Mail. Please excuse my brevity. ------YILTOSUYZF0PF63RTFGGUTVFMQPO7D Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html><head></head><body><div class="gmail_quote">Nauman Abbas <nauman.abbas@seecs.edu.pk> wrote:<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;"> <div dir="ltr">I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps.</div><div class="gmail_extra"><br /><br /><div class="gmail_quote"> On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz <span dir="ltr"><<a href="mailto:gickowic@redhat.com" target="_blank">gickowic@redhat.com</a>></span> wrote:<br /><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> Hi,<br /> <br /> Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with"<br /> or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.<br /> <span class="HOEnZb"><font color="#888888"><br /> Gadi Ickowicz<br /> </font></span><div class="im HOEnZb"><br /> ----- Original Message -----<br /> From: "Nauman Abbas" <<a href="mailto:nauman.abbas@seecs.edu.pk">nauman.abbas@seecs.edu.pk</a>><br /> To: "Meital Bourvine" <<a href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a>><br /> Cc: "<a href="mailto:users@ovirt.org">users@ovirt.org</a>" <<a href="mailto:Users@ovirt.org">Users@ovirt.org</a>><br /> </div><div class="im HOEnZb">Sent: Tuesday, December 31, 2013 11:47:12 AM<br /> Subject: Re: [Users] VM not starting up<br /> <br /> </div><div class="im HOEnZb">Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue.<br /> <br /> <br /> On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < <a href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a> > wrote:<br /> <br /> <br /> <br /> Are you sure that vdsm is running?<br /> <br /> The error happened at 2013-12-31 11:32:56,999 (engine.log)<br /> but the last line in vdsm.log is from 2013-12-31 07:20:50,807<br /> <br /> Also make sure that your clocked are synced.<br /> <br /> <br /> <br /> <br /> <br /> <br /> </div><div class="im HOEnZb">From: "Nauman Abbas" < <a href="mailto:nauman.abbas@seecs.edu.pk">nauman.abbas@seecs.edu.pk</a> ><br /> To: "Meital Bourvine" < <a href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a> ><br /> Cc: " <a href="mailto:users@ovirt.org">users@ovirt.org</a> " < <a href="mailto:Users@ovirt.org">Users@ovirt.org</a> ><br /> Sent: Tuesday, December 31, 2013 9:39:09 AM<br /> <br /> Subject: Re: [Users] VM not starting up<br /> <br /> Sending files one by one. Vdsm.log<br /> <br /> <br /> On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < <a href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a> > wrote:<br /> <br /> <br /> <br /> Engine log can be found on the engine (while vdsm.log is on the host).<br /> The full path is - /var/log/ovirt-engine/engine.log<br /> <br /> audit.log - /var/log/audit/audit.log<br /> <br /> About the vdsm log - I don't see any error there, I think that you cut too much from it.<br /> <br /> <br /> <br /> <br /> </div><div class="im HOEnZb">From: "Nauman Abbas" < <a href="mailto:nauman.abbas@seecs.edu.pk">nauman.abbas@seecs.edu.pk</a> ><br /> To: "Meital Bourvine" < <a href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a> ><br /> Cc: " <a href="mailto:users@ovirt.org">users@ovirt.org</a> " < <a href="mailto:Users@ovirt.org">Users@ovirt.org</a> ><br /> Sent: Tuesday, December 31, 2013 8:42:43 AM<br /> Subject: Re: [Users] VM not starting up<br /> <br /> <br /> Hello Meital<br /> <br /> SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.<br /> <br /> I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.<br /> <br /> <br /> On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < <a href="mailto:mbourvin@redhat.com">mbourvin@redhat.com</a> > wrote:<br /> <br /> <br /> <br /> Hi Nauman,<br /> <br /> Maybe it's a selinux issue?<br /> Please try running `setenforce 0` before starting the vm.<br /> <br /> Also please attach engine.log, vdsm.log, and audit.log<br /> <br /> <br /> <br /> <br /> </div><div class="HOEnZb"><div class="h5">From: "Nauman Abbas" < <a href="mailto:nauman.abbas@seecs.edu.pk">nauman.abbas@seecs.edu.pk</a> ><br /> To: " <a href="mailto:users@ovirt.org">users@ovirt.org</a> " < <a href="mailto:Users@ovirt.org">Users@ovirt.org</a> ><br /> Sent: Tuesday, December 31, 2013 7:13:01 AM<br /> Subject: [Users] VM not starting up<br /> <br /> <br /> Hello all,<br /> <br /> First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.<br /> <br /> " VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."<br /> <br /> I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.<br /> <br /> Regards<br /> <br /> Nauman Abbas<br /> Assistant System Administrator (LMS),<br /> Room No. A-207, SEECS,<br /> National University of Sciences & Technology,<br /> <a href="tel:%2B%2092%20321%205359946" value="+923215359946">+ 92 321 5359946</a><br /> <br /> _______________________________________________<br /> Users mailing list<br /> <a href="mailto:Users@ovirt.org">Users@ovirt.org</a><br /> <a href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank">http://lists.ovirt.org/mailman/listinfo/users</a><br /> <br /> <br /> <br /> <br /> --<br /> <br /> Nauman Abbas<br /> Assistant System Administrator (LMS),<br /> Room No. A-207, SEECS,<br /> National University of Sciences & Technology,<br /> <a href="tel:%2B%2092%20321%205359946" value="+923215359946">+ 92 321 5359946</a><br /> <br /> <br /> <br /> <br /> --<br /> <br /> Nauman Abbas<br /> Assistant System Administrator (LMS),<br /> Room No. A-207, SEECS,<br /> National University of Sciences & Technology,<br /> <a href="tel:%2B%2092%20321%205359946" value="+923215359946">+ 92 321 5359946</a><br /> <br /> <br /> <br /> <br /> --<br /> <br /> Nauman Abbas<br /> Assistant System Administrator (LMS),<br /> Room No. A-207, SEECS,<br /> National University of Sciences & Technology,<br /> <a href="tel:%2B%2092%20321%205359946" value="+923215359946">+ 92 321 5359946</a><br /> <br /> _______________________________________________<br /> Users mailing list<br /> <a href="mailto:Users@ovirt.org">Users@ovirt.org</a><br /> <a href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank">http://lists.ovirt.org/mailman/listinfo/users</a><br /> </div></div></blockquote></div><br /><br clear="all" /><div><br /></div>-- <br /><div dir="ltr"><div><br /></div><font color="#3d85c6">Nauman Abbas<br /></font><div><div><font color="#3d85c6"><font>Assistant System Administrator</font><span style="font-size:small"> (LMS),</span></font></div> <div><font color="#3d85c6">Room No. A-207, SEECS,</font></div><div><font color="#3d85c6">National University of Sciences & Technology,</font></div><div><a value="+923455146301"><font color="#3d85c6">+ 92 321 5359946</font></a></div> </div></div> </div> </blockquote></div><br clear="all">Paste your logs to <a href="http://fpaste.org">fpaste.org</a> or similar and put the url in the mail. Your snippets don‘t contain any errors that i can see.<br> <br> -- <br> Sent from my Android tablet with K-9 Mail. Please excuse my brevity.</body></html> ------YILTOSUYZF0PF63RTFGGUTVFMQPO7D--

It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned. Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar. you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will give more information regarding the failure Gadi Ickowicz ----- Original Message ----- From: "Joop" <jvdwege@xs4all.nl> To: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Tuesday, December 31, 2013 12:51:10 PM Subject: Re: [Users] VM not starting up Nauman Abbas <nauman.abbas@seecs.edu.pk> wrote: I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps. On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic@redhat.com > wrote: Hi, Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with" or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call. Gadi Ickowicz ----- Original Message ----- From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue. On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin@redhat.com > wrote: Are you sure that vdsm is running? The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807 Also make sure that your clocked are synced. From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 9:39:09 AM Subject: Re: [Users] VM not starting up Sending files one by one. Vdsm.log On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com > wrote: Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log audit.log - /var/log/audit/audit.log About the vdsm log - I don't see any error there, I think that you cut too much from it. From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up Hello Meital SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up. I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away. On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com > wrote: Hi Nauman, Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm. Also please attach engine.log, vdsm.log, and audit.log From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up Hello all, First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error. " VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error." I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946 _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946 -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946 -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946 _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946 Paste your logs to fpaste.org or similar and put the url in the mail. Your snippets don‘t contain any errors that i can see. -- Sent from my Android tablet with K-9 Mail. Please excuse my brevity. _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it. http://ur1.ca/gakhc On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic@redhat.com> wrote:
It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned.
Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar.
you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will give more information regarding the failure
Gadi Ickowicz
----- Original Message ----- From: "Joop" <jvdwege@xs4all.nl> To: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Tuesday, December 31, 2013 12:51:10 PM Subject: Re: [Users] VM not starting up
Nauman Abbas <nauman.abbas@seecs.edu.pk> wrote:
I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps.
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic@redhat.com > wrote:
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with" or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.
Gadi Ickowicz
----- Original Message ----- From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin@redhat.com > wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com > wrote:
Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from it.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com > wrote:
Hi Nauman,
Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.
Regards
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
Paste your logs to fpaste.org or similar and put the url in the mail. Your snippets don‘t contain any errors that i can see.
-- Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946

Also I believe these lines right before what I pasted with Fpaste link would be relevant. Thread-622::DEBUG::2013-12-31 05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup handshake: Input/output error Thread-622::DEBUG::2013-12-31 05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm) vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas <nauman.abbas@seecs.edu.pk>wrote:
I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it.
On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic@redhat.com>wrote:
It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned.
Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar.
you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will give more information regarding the failure
Gadi Ickowicz
----- Original Message ----- From: "Joop" <jvdwege@xs4all.nl> To: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Tuesday, December 31, 2013 12:51:10 PM Subject: Re: [Users] VM not starting up
Nauman Abbas <nauman.abbas@seecs.edu.pk> wrote:
I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps.
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic@redhat.com > wrote:
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with" or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.
Gadi Ickowicz
----- Original Message ----- From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin@redhat.com> wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com> wrote:
Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from it.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com> wrote:
Hi Nauman,
Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.
Regards
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
Paste your logs to fpaste.org or similar and put the url in the mail. Your snippets don‘t contain any errors that i can see.
-- Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
-- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946

the lines you added that are right before the Fpaste link are the actual lines messages from libvirt that the vm dies. This message from libvirt is then shown later as the ERROR in vdsm in the Fpaste link. The log should contain, very close to the lines you paste, but a bit before, an xml. it should look something like what I am pasting below. Also, the line right before the xml should contain a prepareVolumePath entry: Thread-50::DEBUG::2013-12-25 14:30:45,282::vm::3031::vm.Vm::(_run) vmId=`fdfaec39-b981-4bd7-9852-6d5ac6ce2b37`::<?xml version="1.0" encoding="utf-8"?> ...<the xml continues a bit with all the vm properties> also - what versions of vdsm, libvirt, sanlock and qemu are you using? Gadi Ickowicz ----- Original Message ----- From: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> To: "Gadi Ickowicz" <gickowic@redhat.com> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Wednesday, January 1, 2014 7:30:24 AM Subject: Re: [Users] VM not starting up Also I believe these lines right before what I pasted with Fpaste link would be relevant. Thread-622::DEBUG::2013-12-31 05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup handshake: Input/output error Thread-622::DEBUG::2013-12-31 05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm) vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas <nauman.abbas@seecs.edu.pk>wrote:
I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it.
On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic@redhat.com>wrote:
It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned.
Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar.
you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will give more information regarding the failure
Gadi Ickowicz
----- Original Message ----- From: "Joop" <jvdwege@xs4all.nl> To: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Tuesday, December 31, 2013 12:51:10 PM Subject: Re: [Users] VM not starting up
Nauman Abbas <nauman.abbas@seecs.edu.pk> wrote:
I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps.
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic@redhat.com > wrote:
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with" or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.
Gadi Ickowicz
----- Original Message ----- From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin@redhat.com> wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com> wrote:
Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from it.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com> wrote:
Hi Nauman,
Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.
Regards
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
Paste your logs to fpaste.org or similar and put the url in the mail. Your snippets don‘t contain any errors that i can see.
-- Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
-- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946

Found it. http://ur1.ca/gakse Also here's the versions vdsm 4.13 sanlock 2.8 libvirt 1.1.3.1 qemu 1.6.1 On Wed, Jan 1, 2014 at 11:56 AM, Gadi Ickowicz <gickowic@redhat.com> wrote:
the lines you added that are right before the Fpaste link are the actual lines messages from libvirt that the vm dies. This message from libvirt is then shown later as the ERROR in vdsm in the Fpaste link.
The log should contain, very close to the lines you paste, but a bit before, an xml. it should look something like what I am pasting below. Also, the line right before the xml should contain a prepareVolumePath entry: Thread-50::DEBUG::2013-12-25 14:30:45,282::vm::3031::vm.Vm::(_run) vmId=`fdfaec39-b981-4bd7-9852-6d5ac6ce2b37`::<?xml version="1.0" encoding="utf-8"?> ...<the xml continues a bit with all the vm properties>
also - what versions of vdsm, libvirt, sanlock and qemu are you using?
Gadi Ickowicz
----- Original Message ----- From: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> To: "Gadi Ickowicz" <gickowic@redhat.com> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Wednesday, January 1, 2014 7:30:24 AM Subject: Re: [Users] VM not starting up
Also I believe these lines right before what I pasted with Fpaste link would be relevant.
Thread-622::DEBUG::2013-12-31 05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup handshake: Input/output error Thread-622::DEBUG::2013-12-31 05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm) vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released
On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas <nauman.abbas@seecs.edu.pk
wrote:
I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it.
On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic@redhat.com wrote:
It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned.
Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar.
you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will give more information regarding the failure
Gadi Ickowicz
----- Original Message ----- From: "Joop" <jvdwege@xs4all.nl> To: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Tuesday, December 31, 2013 12:51:10 PM Subject: Re: [Users] VM not starting up
Nauman Abbas <nauman.abbas@seecs.edu.pk> wrote:
I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps.
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic@redhat.com > wrote:
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with" or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.
Gadi Ickowicz
----- Original Message ----- From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin@redhat.com> wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com> wrote:
Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from it.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com> wrote:
Hi Nauman,
Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.
Regards
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
Paste your logs to fpaste.org or similar and put the url in the mail. Your snippets don‘t contain any errors that i can see.
-- Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
-- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946

And here's the prepareVolumePath entry Thread-622::DEBUG::2013-12-31 05:06:02,576::task::974::TaskManager.Task::(_decref) Task=`8ae0743d-8e3e-4516-9d67-7713fa546759`::ref 0 aborting False Thread-622::INFO::2013-12-31 05:06:02,576::clientIF::350::vds::(prepareVolumePath) prepared volume path: /rhev/data-center/mnt/_data_images_rhev/66e0b27c-dcbb-4b6e-9a58-8213e8380c65/images/7c063b30-634a-483b-82aa-7f19d2ae46cd/b0839e46-9f79-49b2-ae34-f7cafb626c75 Thread-622::DEBUG::2013-12-31 05:06:02,589::utils::489::root::(execCmd) '/usr/libexec/vdsm/hooks/before_vm_start/50_vhostmd' (cwd None) Thread-622::DEBUG::2013-12-31 05:06:02,642::utils::509::root::(execCmd) SUCCESS: <err> = ''; <rc> = 0 Thread-622::INFO::2013-12-31 05:06:02,642::hooks::88::root::(_runHooksDir) Thread-622::DEBUG::2013-12-31 05:06:02,643::vm::2925::vm.Vm::(_run) vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::<?xml version="1.0"... On Wed, Jan 1, 2014 at 12:12 PM, Nauman Abbas <nauman.abbas@seecs.edu.pk>wrote:
Found it. http://ur1.ca/gakse
Also here's the versions vdsm 4.13 sanlock 2.8 libvirt 1.1.3.1 qemu 1.6.1
On Wed, Jan 1, 2014 at 11:56 AM, Gadi Ickowicz <gickowic@redhat.com>wrote:
the lines you added that are right before the Fpaste link are the actual lines messages from libvirt that the vm dies. This message from libvirt is then shown later as the ERROR in vdsm in the Fpaste link.
The log should contain, very close to the lines you paste, but a bit before, an xml. it should look something like what I am pasting below. Also, the line right before the xml should contain a prepareVolumePath entry: Thread-50::DEBUG::2013-12-25 14:30:45,282::vm::3031::vm.Vm::(_run) vmId=`fdfaec39-b981-4bd7-9852-6d5ac6ce2b37`::<?xml version="1.0" encoding="utf-8"?> ...<the xml continues a bit with all the vm properties>
also - what versions of vdsm, libvirt, sanlock and qemu are you using?
Gadi Ickowicz
----- Original Message ----- From: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> To: "Gadi Ickowicz" <gickowic@redhat.com> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Wednesday, January 1, 2014 7:30:24 AM Subject: Re: [Users] VM not starting up
Also I believe these lines right before what I pasted with Fpaste link would be relevant.
Thread-622::DEBUG::2013-12-31 05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup handshake: Input/output error Thread-622::DEBUG::2013-12-31 05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm) vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released
On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas <nauman.abbas@seecs.edu.pk
wrote:
I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it.
On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic@redhat.com wrote:
It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned.
Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar.
you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will give more information regarding the failure
Gadi Ickowicz
----- Original Message ----- From: "Joop" <jvdwege@xs4all.nl> To: "Nauman Abbas" <nauman.abbas@seecs.edu.pk> Cc: "users@ovirt.org" <Users@ovirt.org> Sent: Tuesday, December 31, 2013 12:51:10 PM Subject: Re: [Users] VM not starting up
Nauman Abbas <nauman.abbas@seecs.edu.pk> wrote:
I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps.
On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic@redhat.com > wrote:
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with" or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.
Gadi Ickowicz
----- Original Message ----- From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin@redhat.com> wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com> wrote:
Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from it.
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: "Meital Bourvine" < mbourvin@redhat.com > Cc: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com> wrote:
Hi Nauman,
Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk > To: " users@ovirt.org " < Users@ovirt.org > Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."
I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.
Regards
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
Paste your logs to fpaste.org or similar and put the url in the mail. Your snippets don‘t contain any errors that i can see.
-- Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
--
Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
-- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
participants (4)
-
Gadi Ickowicz
-
Joop
-
Meital Bourvine
-
Nauman Abbas