
Hi, Can someone please help me "move" the network bridge to another port? I have tried a couple times but it doesn't seem to work. Our internal LAN IP range is 192.168.102.0/24 and the storage area network is 10.10.10.0/24 When I installed hosted-engine, I accidently told it to use the 10.10.10.81 interface and a bridge was created accordingly. But I cannot access the 10.10.10.0/24 IP range via our VPN (for security reasons) so I can't access the hosted-engine I tried to remove the bridge interface with brctl but it didn't work as expected. root@virt1 ~]# brctl show bridge name bridge id STP enabled interfaces ;vdsmdummy; 8000.000000000000 no ovirtmgmt 8000.0cc47aeaffd8 no ens2f0 Even though I tried to remove ens2f0 and added ens2f3, it never worked. The bridge / network would stop working and I wold need to login to the server's IPMI card and remove ens2f0. Can someone please guide me in moving the bridge to the 192.168.102.0/24 network? -- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za

Hello, could you please share your current configuration from /etc/sysconfig/network-scripts/ifcfg-{ovirtmgmt,DESIRED_STORAGE_IFACE,DESIRED_MGMT_IFACE}? Thanks, Petr 2017-11-14 23:56 GMT+02:00 Rudi Ahlers <rudiahlers@gmail.com>:
Hi,
Can someone please help me "move" the network bridge to another port? I have tried a couple times but it doesn't seem to work. Our internal LAN IP range is 192.168.102.0/24 and the storage area network is 10.10.10.0/24
When I installed hosted-engine, I accidently told it to use the 10.10.10.81 interface and a bridge was created accordingly. But I cannot access the 10.10.10.0/24 IP range via our VPN (for security reasons) so I can't access the hosted-engine
I tried to remove the bridge interface with brctl but it didn't work as expected.
root@virt1 ~]# brctl show bridge name bridge id STP enabled interfaces ;vdsmdummy; 8000.000000000000 no ovirtmgmt 8000.0cc47aeaffd8 no ens2f0
Even though I tried to remove ens2f0 and added ens2f3, it never worked. The bridge / network would stop working and I wold need to login to the server's IPMI card and remove ens2f0.
Can someone please guide me in moving the bridge to the 192.168.102.0/24 network?
-- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Hi Petr, Thanx for getting back to me. I ended up reinstalling the server. Even after I manually edited the ifcg-ens2f0 and ens2f3 files, and rebooted, networking didn't work well. The gateway was never added (even though it was listed in the files) and the /etc/resolv.conf file kept on being overwritten despite NetworkManager being off. On Wed, Nov 15, 2017 at 1:41 PM, Petr Horacek <phoracek@redhat.com> wrote:
Hello,
could you please share your current configuration from /etc/sysconfig/network-scripts/ifcfg-{ovirtmgmt, DESIRED_STORAGE_IFACE,DESIRED_MGMT_IFACE}?
Thanks, Petr
2017-11-14 23:56 GMT+02:00 Rudi Ahlers <rudiahlers@gmail.com>:
Hi,
Can someone please help me "move" the network bridge to another port? I have tried a couple times but it doesn't seem to work. Our internal LAN IP range is 192.168.102.0/24 and the storage area network is 10.10.10.0/24
When I installed hosted-engine, I accidently told it to use the 10.10.10.81 interface and a bridge was created accordingly. But I cannot access the 10.10.10.0/24 IP range via our VPN (for security reasons) so I can't access the hosted-engine
I tried to remove the bridge interface with brctl but it didn't work as expected.
root@virt1 ~]# brctl show bridge name bridge id STP enabled interfaces ;vdsmdummy; 8000.000000000000 no ovirtmgmt 8000.0cc47aeaffd8 no ens2f0
Even though I tried to remove ens2f0 and added ens2f3, it never worked. The bridge / network would stop working and I wold need to login to the server's IPMI card and remove ens2f0.
Can someone please guide me in moving the bridge to the 192.168.102.0/24 network?
-- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za

Manual change of ifcfg files and restart of network service (not reboot) should restore connectivity. Then you should be able to access Engine and setup the new network there so it will be persisted and recognized by oVirt. Glad you managed to run it. 2017-11-15 13:45 GMT+02:00 Rudi Ahlers <rudiahlers@gmail.com>:
Hi Petr,
Thanx for getting back to me.
I ended up reinstalling the server. Even after I manually edited the ifcg-ens2f0 and ens2f3 files, and rebooted, networking didn't work well. The gateway was never added (even though it was listed in the files) and the /etc/resolv.conf file kept on being overwritten despite NetworkManager being off.
On Wed, Nov 15, 2017 at 1:41 PM, Petr Horacek <phoracek@redhat.com> wrote:
Hello,
could you please share your current configuration from /etc/sysconfig/network-scripts/ifcfg-{ovirtmgmt,DESIRED_ STORAGE_IFACE,DESIRED_MGMT_IFACE}?
Thanks, Petr
2017-11-14 23:56 GMT+02:00 Rudi Ahlers <rudiahlers@gmail.com>:
Hi,
Can someone please help me "move" the network bridge to another port? I have tried a couple times but it doesn't seem to work. Our internal LAN IP range is 192.168.102.0/24 and the storage area network is 10.10.10.0/24
When I installed hosted-engine, I accidently told it to use the 10.10.10.81 interface and a bridge was created accordingly. But I cannot access the 10.10.10.0/24 IP range via our VPN (for security reasons) so I can't access the hosted-engine
I tried to remove the bridge interface with brctl but it didn't work as expected.
root@virt1 ~]# brctl show bridge name bridge id STP enabled interfaces ;vdsmdummy; 8000.000000000000 no ovirtmgmt 8000.0cc47aeaffd8 no ens2f0
Even though I tried to remove ens2f0 and added ens2f3, it never worked. The bridge / network would stop working and I wold need to login to the server's IPMI card and remove ens2f0.
Can someone please guide me in moving the bridge to the 192.168.102.0/24 network?
-- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za

I know, have been using Linux since 2000 and redoing the network isn't difficult, but in this case something didn't work well. Right now I'm stuck with a degraded Gluster setup after the reinstallation for which I have posted another thread. On Wed, Nov 15, 2017 at 1:58 PM, Petr Horacek <phoracek@redhat.com> wrote:
Manual change of ifcfg files and restart of network service (not reboot) should restore connectivity. Then you should be able to access Engine and setup the new network there so it will be persisted and recognized by oVirt.
Glad you managed to run it.
2017-11-15 13:45 GMT+02:00 Rudi Ahlers <rudiahlers@gmail.com>:
Hi Petr,
Thanx for getting back to me.
I ended up reinstalling the server. Even after I manually edited the ifcg-ens2f0 and ens2f3 files, and rebooted, networking didn't work well. The gateway was never added (even though it was listed in the files) and the /etc/resolv.conf file kept on being overwritten despite NetworkManager being off.
On Wed, Nov 15, 2017 at 1:41 PM, Petr Horacek <phoracek@redhat.com> wrote:
Hello,
could you please share your current configuration from /etc/sysconfig/network-scripts/ifcfg-{ovirtmgmt,DESIRED_STOR AGE_IFACE,DESIRED_MGMT_IFACE}?
Thanks, Petr
2017-11-14 23:56 GMT+02:00 Rudi Ahlers <rudiahlers@gmail.com>:
Hi,
Can someone please help me "move" the network bridge to another port? I have tried a couple times but it doesn't seem to work. Our internal LAN IP range is 192.168.102.0/24 and the storage area network is 10.10.10.0/24
When I installed hosted-engine, I accidently told it to use the 10.10.10.81 interface and a bridge was created accordingly. But I cannot access the 10.10.10.0/24 IP range via our VPN (for security reasons) so I can't access the hosted-engine
I tried to remove the bridge interface with brctl but it didn't work as expected.
root@virt1 ~]# brctl show bridge name bridge id STP enabled interfaces ;vdsmdummy; 8000.000000000000 no ovirtmgmt 8000.0cc47aeaffd8 no ens2f0
Even though I tried to remove ens2f0 and added ens2f3, it never worked. The bridge / network would stop working and I wold need to login to the server's IPMI card and remove ens2f0.
Can someone please guide me in moving the bridge to the 192.168.102.0/24 network?
-- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za
-- Kind Regards Rudi Ahlers Website: http://www.rudiahlers.co.za
participants (2)
-
Petr Horacek
-
Rudi Ahlers