Hi all. Is it possible to use the Mellanox VFs with bridge from VMs? My switch is configured as a trunk accepting VLAN 1000. I configured Mellanox ConnectX-3 to create 2 VFs. 1 VF I used for iSCSI on VLAN 1000 (it worked) and another VF I set up a bridge on VLAN 1000 to use on the VMs. What is happening is that the VM's mac hits the switch on VLAN 1000, but has no traffic. Below are some images of my setup... *Switch:* [image: image.png] *oVirt Host:* [image: image.png] [image: image.png] [image: image.png] [image: image.png] [image: image.png] [image: image.png] *oVirt Guest VM:* [image: image.png] Can anyone give a little help? All the best! -- Att, Jorge Visentini +55 55 98432-9868