Hello Sahina, do you know how to configure the gluster service in an already installed engine, it was originally installed with virt only service engine-setup --reconfigure-optional-components only allows me to install the ovirt-ovn-provider. Thanks, Paul S. ________________________________ From: Sahina Bose <sabose@redhat.com> Sent: 16 October 2018 08:28 To: rkc20@humboldt.edu Cc: users Subject: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 5:01 AM Ravi Chalasani <rkc20@humboldt.edu<mailto:rkc20@humboldt.edu>> wrote: Already have working three node 4.2.5 HA cluster in the lab using this guide: https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-sto.... Now I would like to test a six or nine node cluster mentioned in the RHHI 1.1 guide. Is there some doc I am missing? If you already have the setup running with 3 nodes, you can add the additional nodes using the oVirt engine. Thanks _______________________________________________ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HJKCQVJGI3M3Y6... To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html

Yes it was originally installed in virt only rather than both and it doesn't ask when running engine-setup, in the answerfile it has OVESETUP_CONFIG/applicationMode=none:None It lets me configure it at the cluster level so I was initially confused as to why it didn't work. I have been trying to find an option for otopi. Thanks, Paul S. ________________________________ From: Sahina Bose <sabose@redhat.com> Sent: 16 October 2018 12:53 To: Staniforth, Paul; Gobinda Das Cc: rkc20@humboldt.edu; users Subject: Re: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 4:47 PM Staniforth, Paul <P.Staniforth@leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>> wrote: Hello Sahina, do you know how to configure the gluster service in an already installed engine, it was originally installed with virt only service engine-setup --reconfigure-optional-components only allows me to install the ovirt-ovn-provider Ah, you did not install in "Both" mode? I haven't tried changing from virt to virt+gluster mode for engine deployment. Does running engine-setup again prompt for this? If not, we'll need to dig into this a bit more. Or are you talking of the services enabled on Cluster? Thanks, Paul S. ________________________________ From: Sahina Bose <sabose@redhat.com<mailto:sabose@redhat.com>> Sent: 16 October 2018 08:28 To: rkc20@humboldt.edu<mailto:rkc20@humboldt.edu> Cc: users Subject: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 5:01 AM Ravi Chalasani <rkc20@humboldt.edu<mailto:rkc20@humboldt.edu>> wrote: Already have working three node 4.2.5 HA cluster in the lab using this guide: https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-sto.... Now I would like to test a six or nine node cluster mentioned in the RHHI 1.1 guide. Is there some doc I am missing? If you already have the setup running with 3 nodes, you can add the additional nodes using the oVirt engine. Thanks _______________________________________________ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HJKCQVJGI3M3Y6... To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html

I have an engine restored from a back-up but with no hosts connected I'll try with that first. Thanks, Paul S. ________________________________ From: Sahina Bose <sabose@redhat.com> Sent: 17 October 2018 12:40 To: Staniforth, Paul Cc: Gobinda Das; rkc20@humboldt.edu; users Subject: Re: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 6:08 PM Staniforth, Paul <P.Staniforth@leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>> wrote: Yes it was originally installed in virt only rather than both and it doesn't ask when running engine-setup, in the answerfile it has OVESETUP_CONFIG/applicationMode=none:None I don't think there's a way to change this via reconfigure. But if you're up to experiment, you can try changing the value of "ApplicationMode" to 255 in the database table "vdc_options". Restart your engine once you make this change. It lets me configure it at the cluster level so I was initially confused as to why it didn't work. I have been trying to find an option for otopi. Thanks, Paul S. ________________________________ From: Sahina Bose <sabose@redhat.com<mailto:sabose@redhat.com>> Sent: 16 October 2018 12:53 To: Staniforth, Paul; Gobinda Das Cc: rkc20@humboldt.edu<mailto:rkc20@humboldt.edu>; users Subject: Re: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 4:47 PM Staniforth, Paul <P.Staniforth@leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>> wrote: Hello Sahina, do you know how to configure the gluster service in an already installed engine, it was originally installed with virt only service engine-setup --reconfigure-optional-components only allows me to install the ovirt-ovn-provider Ah, you did not install in "Both" mode? I haven't tried changing from virt to virt+gluster mode for engine deployment. Does running engine-setup again prompt for this? If not, we'll need to dig into this a bit more. Or are you talking of the services enabled on Cluster? Thanks, Paul S. ________________________________ From: Sahina Bose <sabose@redhat.com<mailto:sabose@redhat.com>> Sent: 16 October 2018 08:28 To: rkc20@humboldt.edu<mailto:rkc20@humboldt.edu> Cc: users Subject: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 5:01 AM Ravi Chalasani <rkc20@humboldt.edu<mailto:rkc20@humboldt.edu>> wrote: Already have working three node 4.2.5 HA cluster in the lab using this guide: https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-sto.... Now I would like to test a six or nine node cluster mentioned in the RHHI 1.1 guide. Is there some doc I am missing? If you already have the setup running with 3 nodes, you can add the additional nodes using the oVirt engine. Thanks _______________________________________________ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave@ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HJKCQVJGI3M3Y6... To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html