2:51 p.m.
Hi all - trying to evaluate ovirt and having real problems with getting a self
contained install running.
I've followed the Quickstart guide at:
http://www.ovirt.org/Download
word for word using a fresh CentOS 6.4 install with all updates applied on a
Intel based PC with 8GB Ram and two nics.
It seems to all go well but when I get into the web interface, none of the
storage is initially visible, neither the ISO_DOMAIN nor the local storage.
Oddly if I refresh the browser (firefox & chrome) while on the storage page
the ISO_DOMAIN appears but can't be attached to a datacenter - "None
Available"
If I go into the host page the host is there but not finished configuring. The
network setup is unfinished, the management interface is not attached to a
NIC. If I attach it to the active nic (NIC 0) it throws an exception on Save.
I can attach it to nic 1 but its not actually hooked up to anything.
I have successfully installed and run proxmox on this pc, so don;t think
there are hardware problems.
On a related note - I've also been trying to test ovirt at home, which means
running it on KVM (setup with virt-manager). CentOS installs fine but on
reboot just goes to a black screen with the hour glass. If anyone has
suggestions on how to get past that it would help my test config a lot :) Host
machine is Kubuntu 13.10.
Thanks,
--
Lindsay
5:44 p.m.
On 11/14/2013 03:51 PM, Lindsay Mathieson wrote:
Hi all - trying to evaluate ovirt and having real problems with
getting a self
contained install running.
I've followed the Quickstart guide at:
http://www.ovirt.org/Download
word for word using a fresh CentOS 6.4 install with all updates applied on a
Intel based PC with 8GB Ram and two nics.
It seems to all go well but when I get into the web interface, none of the
storage is initially visible, neither the ISO_DOMAIN nor the local storage.
Oddly if I refresh the browser (firefox & chrome) while on the storage page
the ISO_DOMAIN appears but can't be attached to a datacenter - "None
Available"
If I go into the host page the host is there but not finished configuring. The
network setup is unfinished, the management interface is not attached to a
NIC. If I attach it to the active nic (NIC 0) it throws an exception on Save.
I can attach it to nic 1 but its not actually hooked up to anything.
I have successfully installed and run proxmox on this pc, so don;t think
there are hardware problems.
On a related note - I've also been trying to test ovirt at home, which means
running it on KVM (setup with virt-manager). CentOS installs fine but on
reboot just goes to a black screen with the hour glass. If anyone has
suggestions on how to get past that it would help my test config a lot :) Host
machine is Kubuntu 13.10.
Thanks,
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
any errors in the setup logs? in engine logs?
6:17 p.m.
On 15 November 2013 09:44, Itamar Heim <iheim(a)redhat.com> wrote:
On 11/14/2013 03:51 PM, Lindsay Mathieson wrote:
> Hi all - trying to evaluate ovirt and having real problems with getting a
> self
> contained install running.
>
> I've followed the Quickstart guide at:
>
> any errors in the setup logs? in engine logs?
Could you point me to the log locations?
thanks
--
Lindsay
6:40 p.m.
On 11/14/2013 07:17 PM, Lindsay Mathieson wrote:
On 15 November 2013 09:44, Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com>> wrote:
On 11/14/2013 03:51 PM, Lindsay Mathieson wrote:
Hi all - trying to evaluate ovirt and having real problems with
getting a self
contained install running.
I've followed the Quickstart guide at:
any errors in the setup logs? in engine logs?
Could you point me to the log locations?
thanks
--
Lindsay
i don't remember them of the top of my head, but you can run the
engine-log-collector and it will collec them for you.
sandro - any wiki on troubleshooting/log locations?
10:01 p.m.
I ran that, large number of logs collected - any ones in particualr you
want to see?
the sos.log consists of this:
2013-11-15 13:49:51,373 INFO: could not run command: /usr/bin/systool -v -c
-b scsi
2013-11-15 13:49:53,699 INFO: error copying file /sys/bus/scsi/uevent
(IOError)
2013-11-15 13:49:53,701 INFO: error copying file
/sys/bus/scsi/drivers/sr/uevent (IOError)
2013-11-15 13:49:53,701 INFO: error copying file
/sys/bus/scsi/drivers/sr/unbind (IOError)
2013-11-15 13:49:53,702 INFO: error copying file
/sys/bus/scsi/drivers/sr/bind (IOError)
2013-11-15 13:49:53,702 INFO: error copying file
/sys/bus/scsi/drivers_probe (IOError)
2013-11-15 13:49:54,113 INFO: could not run command: /usr/bin/cpufreq-info
2013-11-15 13:49:55,203 INFO: could not run command: /usr/bin/systool -c
fc_host -v
2013-11-15 13:49:55,203 INFO: could not run command: /usr/bin/systool -c
scsi_host -v
2013-11-15 13:49:55,215 INFO: error copying file
/sys/module/ipmi_si/parameters/hotmod (IOError)
2013-11-15 13:49:55,232 INFO: error copying file
/sys/module/md_mod/parameters/new_array (IOError)
2013-11-15 13:49:55,239 INFO: error copying file
/sys/module/libfcoe/parameters/disable (IOError)
2013-11-15 13:49:55,239 INFO: error copying file
/sys/module/libfcoe/parameters/enable (IOError)
2013-11-15 13:49:55,240 INFO: error copying file
/sys/module/libfcoe/parameters/destroy (IOError)
2013-11-15 13:49:55,240 INFO: error copying file
/sys/module/libfcoe/parameters/create_vn2vn (IOError)
2013-11-15 13:49:55,240 INFO: error copying file
/sys/module/libfcoe/parameters/create (IOError)
2013-11-15 13:49:55,241 INFO: error copying file
/sys/module/fcoe/parameters/disable (IOError)
2013-11-15 13:49:55,241 INFO: error copying file
/sys/module/fcoe/parameters/enable (IOError)
2013-11-15 13:49:55,241 INFO: error copying file
/sys/module/fcoe/parameters/destroy (IOError)
2013-11-15 13:49:55,241 INFO: error copying file
/sys/module/fcoe/parameters/create (IOError)
2013-11-15 13:49:56,085 INFO: could not run command: /usr/sbin/dkms status
NB:This was run in a XenServer VM so Host virtulisation and the all-in-one
plugine weren't possible.
On 15 November 2013 10:40, Itamar Heim <iheim(a)redhat.com> wrote:
On 11/14/2013 07:17 PM, Lindsay Mathieson wrote:
> On 15 November 2013 09:44, Itamar Heim <iheim(a)redhat.com
> <mailto:iheim@redhat.com>> wrote:
>
> On 11/14/2013 03:51 PM, Lindsay Mathieson wrote:
>
> Hi all - trying to evaluate ovirt and having real problems with
> getting a self
> contained install running.
>
> I've followed the Quickstart guide at:
>
> any errors in the setup logs? in engine logs?
>
>
>
> Could you point me to the log locations?
>
> thanks
>
> --
> Lindsay
>
i don't remember them of the top of my head, but you can run the
engine-log-collector and it will collec them for you.
sandro - any wiki on troubleshooting/log locations?
--
Lindsay
11:51 p.m.
On 11/14/2013 11:01 PM, Lindsay Mathieson wrote:
I ran that, large number of logs collected - any ones in particualr
you
want to see?
the sos.log consists of this:
2013-11-15 13:49:51,373 INFO: could not run command: /usr/bin/systool -v
-c -b scsi
2013-11-15 13:49:53,699 INFO: error copying file /sys/bus/scsi/uevent
(IOError)
2013-11-15 13:49:53,701 INFO: error copying file
/sys/bus/scsi/drivers/sr/uevent (IOError)
2013-11-15 13:49:53,701 INFO: error copying file
/sys/bus/scsi/drivers/sr/unbind (IOError)
2013-11-15 13:49:53,702 INFO: error copying file
/sys/bus/scsi/drivers/sr/bind (IOError)
2013-11-15 13:49:53,702 INFO: error copying file
/sys/bus/scsi/drivers_probe (IOError)
2013-11-15 13:49:54,113 INFO: could not run command: /usr/bin/cpufreq-info
2013-11-15 13:49:55,203 INFO: could not run command: /usr/bin/systool -c
fc_host -v
2013-11-15 13:49:55,203 INFO: could not run command: /usr/bin/systool -c
scsi_host -v
2013-11-15 13:49:55,215 INFO: error copying file
/sys/module/ipmi_si/parameters/hotmod (IOError)
2013-11-15 13:49:55,232 INFO: error copying file
/sys/module/md_mod/parameters/new_array (IOError)
2013-11-15 13:49:55,239 INFO: error copying file
/sys/module/libfcoe/parameters/disable (IOError)
2013-11-15 13:49:55,239 INFO: error copying file
/sys/module/libfcoe/parameters/enable (IOError)
2013-11-15 13:49:55,240 INFO: error copying file
/sys/module/libfcoe/parameters/destroy (IOError)
2013-11-15 13:49:55,240 INFO: error copying file
/sys/module/libfcoe/parameters/create_vn2vn (IOError)
2013-11-15 13:49:55,240 INFO: error copying file
/sys/module/libfcoe/parameters/create (IOError)
2013-11-15 13:49:55,241 INFO: error copying file
/sys/module/fcoe/parameters/disable (IOError)
2013-11-15 13:49:55,241 INFO: error copying file
/sys/module/fcoe/parameters/enable (IOError)
2013-11-15 13:49:55,241 INFO: error copying file
/sys/module/fcoe/parameters/destroy (IOError)
2013-11-15 13:49:55,241 INFO: error copying file
/sys/module/fcoe/parameters/create (IOError)
2013-11-15 13:49:56,085 INFO: could not run command: /usr/sbin/dkms status
NB:This was run in a XenServer VM so Host virtulisation and the
all-in-one plugine weren't possible.
On 15 November 2013 10:40, Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com>> wrote:
On 11/14/2013 07:17 PM, Lindsay Mathieson wrote:
On 15 November 2013 09:44, Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com>
<mailto:iheim@redhat.com <mailto:iheim@redhat.com>>> wrote:
On 11/14/2013 03:51 PM, Lindsay Mathieson wrote:
Hi all - trying to evaluate ovirt and having real
problems with
getting a self
contained install running.
I've followed the Quickstart guide at:
any errors in the setup logs? in engine logs?
Could you point me to the log locations?
thanks
--
Lindsay
i don't remember them of the top of my head, but you can run the
engine-log-collector and it will collec them for you.
sandro - any wiki on troubleshooting/log locations?
--
Lindsay
oh, was nested virt enabled? this is an all in one deployment, right? it
needs VT extensions to work.
you pasted the errors of the sos.log, not the content of the zip
12:13 a.m.
On 15 November 2013 15:51, Itamar Heim <iheim(a)redhat.com> wrote:
oh, was nested virt enabled? this is an all in one deployment, right? it
needs VT extensions to work.
you pasted the errors of the sos.log, not the content of the zip
I've been testing in a mix of environments between home and work :) My
oriignaltest was with real hardware but thats not available right now.
This latest was on XenServer, so I don't think kvm can run nested on that.
I was just trying the management interface out - I presumed the storage etc
could be setup without a hostnode attached.
I'd do nested virt at home, CentOS installs via virt-manager fine, but just
displays a black screen on startup.
thanks,
--
Lindsay
12:20 a.m.
On 11/15/2013 01:13 AM, Lindsay Mathieson wrote:
On 15 November 2013 15:51, Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com>> wrote:
oh, was nested virt enabled? this is an all in one deployment,
right? it needs VT extensions to work.
you pasted the errors of the sos.log, not the content of the zip
I've been testing in a mix of environments between home and work :) My
oriignaltest was with real hardware but thats not available right now.
This latest was on XenServer, so I don't think kvm can run nested on
that. I was just trying the management interface out - I presumed the
storage etc could be setup without a hostnode attached.
you can install the engine as a VM, but the download describes deploying
the all-in-one plugin - that deployes engine+vdsm(host) on same box.
I'd do nested virt at home, CentOS installs via virt-manager
fine, but
just displays a black screen on startup.
that's a centos/ubuntu issue - sorry i can't help with that.
if you want to easily play with it for a demo, may i suggest you try to
boot from the live-usb?
http://www.ovirt.org/OVirt_Live
thanks,
--
Lindsay
12:59 a.m.
On 15 November 2013 16:20, Itamar Heim <iheim(a)redhat.com> wrote:
you can install the engine as a VM, but the download describes
deploying the
all-in-one plugin - that deployes engine+vdsm(host) on same box.
Yah, the plug was disabled as no kvm available. I thought the
all-in-one was optional for that guide?
> I'd do nested virt at home, CentOS installs via virt-manager fine, but
> just displays a black screen on startup.
that's a centos/ubuntu issue - sorry i can't help with that.
if you want to easily play with it for a demo, may i suggest you try to boot
from the live-usb?
http://www.ovirt.org/OVirt_Live
I'll give it another spin on Monday.
Thanks,
--
Lindsay
1:24 a.m.
On Fri, Nov 15, 2013 at 7:59 AM, Lindsay Mathieson wrote:
On 15 November 2013 16:20, Itamar Heim wrote:
> you can install the engine as a VM, but the download describes deploying the
> all-in-one plugin - that deployes engine+vdsm(host) on same box.
Yah, the plug was disabled as no kvm available. I thought the
all-in-one was optional for that guide?
The all-in-one is optional in the sense that you need to run
sudo yum install -y ovirt-engine-setup-plugin-allinone
only if you want an all-in-one setup (aka one engine that is also the
hypervisor)
Normally when you deploy a host there is the reboot of the host itself
at the end of the stage
In case of all-in-one this would be a problem.of course
So the engine-setup after you install all-in-one plugin would take
care itself to make as normally the engine configuration and setup,
but also the deploy part of itself as a host, without reboot (there
was a bug in the past hitting me on this... ;-)
see also here for further information about all-in-one:
http://www.ovirt.org/Feature/AllInOne
HiH,
Gianluca
1:30 a.m.
On 11/15/2013 02:24 AM, Gianluca Cecchi wrote:
On Fri, Nov 15, 2013 at 7:59 AM, Lindsay Mathieson wrote:
> On 15 November 2013 16:20, Itamar Heim wrote:
>
>> you can install the engine as a VM, but the download describes deploying the
>> all-in-one plugin - that deployes engine+vdsm(host) on same box.
>
> Yah, the plug was disabled as no kvm available. I thought the
> all-in-one was optional for that guide?
>
The all-in-one is optional in the sense that you need to run
sudo yum install -y ovirt-engine-setup-plugin-allinone
only if you want an all-in-one setup (aka one engine that is also the
hypervisor)
Normally when you deploy a host there is the reboot of the host itself
at the end of the stage
actually, in 3.3 there is no longer a reboot at host install.
still, the AIO automatically defines the DC as local-host type, auto
configures the host and a data storage domain, etc.
In case of all-in-one this would be a problem.of course
So the engine-setup after you install all-in-one plugin would take
care itself to make as normally the engine configuration and setup,
but also the deploy part of itself as a host, without reboot (there
was a bug in the past hitting me on this... ;-)
see also here for further information about all-in-one:
http://www.ovirt.org/Feature/AllInOne
HiH,
Gianluca
4:20 a.m.
Il 15/11/2013 01:40, Itamar Heim ha scritto:
On 11/14/2013 07:17 PM, Lindsay Mathieson wrote:
> On 15 November 2013 09:44, Itamar Heim <iheim(a)redhat.com
> <mailto:iheim@redhat.com>> wrote:
>
> On 11/14/2013 03:51 PM, Lindsay Mathieson wrote:
>
> Hi all - trying to evaluate ovirt and having real problems with
> getting a self
> contained install running.
>
> I've followed the Quickstart guide at:
>
> any errors in the setup logs? in engine logs?
>
>
>
> Could you point me to the log locations?
>
> thanks
>
> --
> Lindsay
i don't remember them of the top of my head, but you can run the engine-log-collector
and it will collec them for you.
sandro - any wiki on troubleshooting/log locations?
About troubleshooting we have:
http://www.ovirt.org/Troubleshooting
About logs we have:
http://www.ovirt.org/Vdsm_Log_Files
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
4055
days inactive
4056
days old
11 comments
4 participants
participants (4)
-
Gianluca Cecchi -
Itamar Heim -
Lindsay Mathieson -
Sandro Bonazzola