4:53 a.m.
Hey Guys,
First time pposter here, I am having an issue with installing oVirt
on a Dell SC1435
I ran lscpu to make sure I was Virtualized in the bios, The following was
the result
[root@council ~]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 30
Model name: Intel(R) Core(TM) i7 CPU K 875 @ 2.93GHz
Stepping: 5
CPU MHz: 1197.000
BogoMIPS: 5862.18
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
So I then tried to run the hosted-engine --deploy and this is what happens:
[root@starfleet tmpengineiso]# screen
[ INFO ] Stage: Initializing
[ INFO ] Generating a temporary VNC password.
[ INFO ] Stage: Environment setup
Continuing will configure this host for serving as hypervisor and
create a VM where you have to install oVirt Engine afterwards.
Are you sure you want to continue? (Yes, No)[Yes]: YEs
Configuration files: []
Log file:
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20151230042443-p6o0qo.log
Version: otopi-1.4.0 (otopi-1.4.0-1.el7.centos)
[ ERROR ] Failed to execute stage 'Environment setup': Hardware does not
support virtualization
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20151230042447.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
I have attached my logfile, and a few screeshots .... Let me know please,
Thanks,
--
Michael A Cooper
Linux Certified
Zerto Certified
http://www.coopfire.com
9:41 a.m.
Hi Michael,
the fact that your CPU supports VT does not mean it's enabled in the BIOS.
Reboot the machine and into the security -> virtualization settings. Make
sure
it's enabled there.
One more thing you want to verify is that the kvm module is loaded into the
kernel-
lsmod | grep kvm
You can also run: dmesg | grep kvm
In most cases you'll find something like kvm: some error if it's disable
by the bios.
Doron
On Wed, Dec 30, 2015 at 11:53 AM, Michael Cooper <mcooper(a)coopfire.com>
wrote:
Hey Guys,
First time pposter here, I am having an issue with installing
oVirt on a Dell SC1435
I ran lscpu to make sure I was Virtualized in the bios, The following was
the result
[root@council ~]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 30
Model name: Intel(R) Core(TM) i7 CPU K 875 @ 2.93GHz
Stepping: 5
CPU MHz: 1197.000
BogoMIPS: 5862.18
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
So I then tried to run the hosted-engine --deploy and this is what happens:
[root@starfleet tmpengineiso]# screen
[ INFO ] Stage: Initializing
[ INFO ] Generating a temporary VNC password.
[ INFO ] Stage: Environment setup
Continuing will configure this host for serving as hypervisor
and create a VM where you have to install oVirt Engine afterwards.
Are you sure you want to continue? (Yes, No)[Yes]: YEs
Configuration files: []
Log file:
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20151230042443-p6o0qo.log
Version: otopi-1.4.0 (otopi-1.4.0-1.el7.centos)
[ ERROR ] Failed to execute stage 'Environment setup': Hardware does not
support virtualization
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20151230042447.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
I have attached my logfile, and a few screeshots .... Let me know please,
Thanks,
--
Michael A Cooper
Linux Certified
Zerto Certified
http://www.coopfire.com
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
9:50 a.m.
The SC1435 is a rather old AMD machine IIRC. In fact, we've been using one
of those to test oVirt in the very early days.
As Doron mentioned, you need to make sure virtualization is enabled in the
bios, and if you find it off, after enabling it, make sure you do a full
power cycle of the server, just saving the bios changes is not enough.
Dan
On Thu, Dec 31, 2015 at 9:41 AM, Doron Fediuck <dfediuck(a)redhat.com> wrote:
Hi Michael,
the fact that your CPU supports VT does not mean it's enabled in the BIOS.
Reboot the machine and into the security -> virtualization settings. Make
sure
it's enabled there.
One more thing you want to verify is that the kvm module is loaded into
the kernel-
lsmod | grep kvm
You can also run: dmesg | grep kvm
In most cases you'll find something like kvm: some error if it's disable
by the bios.
Doron
On Wed, Dec 30, 2015 at 11:53 AM, Michael Cooper <mcooper(a)coopfire.com>
wrote:
> Hey Guys,
>
> First time pposter here, I am having an issue with installing
> oVirt on a Dell SC1435
> I ran lscpu to make sure I was Virtualized in the bios, The following was
> the result
>
> [root@council ~]# lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 8
> On-line CPU(s) list: 0-7
> Thread(s) per core: 2
> Core(s) per socket: 4
> Socket(s): 1
> NUMA node(s): 1
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 30
> Model name: Intel(R) Core(TM) i7 CPU K 875 @ 2.93GHz
> Stepping: 5
> CPU MHz: 1197.000
> BogoMIPS: 5862.18
> Virtualization: VT-x
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 8192K
> NUMA node0 CPU(s): 0-7
>
> So I then tried to run the hosted-engine --deploy and this is what
> happens:
>
> [root@starfleet tmpengineiso]# screen
> [ INFO ] Stage: Initializing
> [ INFO ] Generating a temporary VNC password.
> [ INFO ] Stage: Environment setup
> Continuing will configure this host for serving as hypervisor
> and create a VM where you have to install oVirt Engine afterwards.
> Are you sure you want to continue? (Yes, No)[Yes]: YEs
> Configuration files: []
> Log file:
>
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20151230042443-p6o0qo.log
> Version: otopi-1.4.0 (otopi-1.4.0-1.el7.centos)
> [ ERROR ] Failed to execute stage 'Environment setup': Hardware does not
> support virtualization
> [ INFO ] Stage: Clean up
> [ INFO ] Generating answer file
> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20151230042447.conf'
> [ INFO ] Stage: Pre-termination
> [ INFO ] Stage: Termination
>
> I have attached my logfile, and a few screeshots .... Let me know please,
>
> Thanks,
>
> --
> Michael A Cooper
> Linux Certified
> Zerto Certified
> http://www.coopfire.com
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
10:05 a.m.
On Thu, Dec 31, 2015 at 4:41 PM, Doron Fediuck <dfediuck(a)redhat.com> wrote:
Hi Michael,
the fact that your CPU supports VT does not mean it's enabled in the BIOS.
Reboot the machine and into the security -> virtualization settings. Make
sure
it's enabled there.
It's detailed in
http://www.linux-kvm.org/page/FAQ#.22KVM:_disabled_by_BIOS.22_error
If if doesn't work after the changes in the BIOS, make sure to power off
and on and possibly disable trusted execution.
Y.
One more thing you want to verify is that the kvm module is loaded
into
the kernel-
lsmod | grep kvm
You can also run: dmesg | grep kvm
In most cases you'll find something like kvm: some error if it's disable
by the bios.
Doron
On Wed, Dec 30, 2015 at 11:53 AM, Michael Cooper <mcooper(a)coopfire.com>
wrote:
> Hey Guys,
>
> First time pposter here, I am having an issue with installing
> oVirt on a Dell SC1435
> I ran lscpu to make sure I was Virtualized in the bios, The following was
> the result
>
> [root@council ~]# lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 8
> On-line CPU(s) list: 0-7
> Thread(s) per core: 2
> Core(s) per socket: 4
> Socket(s): 1
> NUMA node(s): 1
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 30
> Model name: Intel(R) Core(TM) i7 CPU K 875 @ 2.93GHz
> Stepping: 5
> CPU MHz: 1197.000
> BogoMIPS: 5862.18
> Virtualization: VT-x
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 8192K
> NUMA node0 CPU(s): 0-7
>
> So I then tried to run the hosted-engine --deploy and this is what
> happens:
>
> [root@starfleet tmpengineiso]# screen
> [ INFO ] Stage: Initializing
> [ INFO ] Generating a temporary VNC password.
> [ INFO ] Stage: Environment setup
> Continuing will configure this host for serving as hypervisor
> and create a VM where you have to install oVirt Engine afterwards.
> Are you sure you want to continue? (Yes, No)[Yes]: YEs
> Configuration files: []
> Log file:
>
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20151230042443-p6o0qo.log
> Version: otopi-1.4.0 (otopi-1.4.0-1.el7.centos)
> [ ERROR ] Failed to execute stage 'Environment setup': Hardware does not
> support virtualization
> [ INFO ] Stage: Clean up
> [ INFO ] Generating answer file
> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20151230042447.conf'
> [ INFO ] Stage: Pre-termination
> [ INFO ] Stage: Termination
>
> I have attached my logfile, and a few screeshots .... Let me know please,
>
> Thanks,
>
> --
> Michael A Cooper
> Linux Certified
> Zerto Certified
> http://www.coopfire.com
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3283
days inactive
3284
days old
3 comments
4 participants
participants (4)
-
Dan Yasny -
Doron Fediuck -
Michael Cooper -
Yaniv Kaul